* be incorporated into the next SCTP release.
*/
-#include <linux/config.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/wait.h>
#include <linux/time.h>
#include <linux/ip.h>
+#include <linux/capability.h>
#include <linux/fcntl.h>
#include <linux/poll.h>
#include <linux/init.h>
sizeof(struct sk_buff) +
sizeof(struct sctp_chunk);
- sk->sk_wmem_queued += SCTP_DATA_SNDSIZE(chunk) +
- sizeof(struct sk_buff) +
- sizeof(struct sctp_chunk);
-
atomic_add(sizeof(struct sctp_chunk), &sk->sk_wmem_alloc);
}
return -EINVAL;
/* Is this a valid SCTP address? */
- if (!af->addr_valid(addr, sctp_sk(sk)))
+ if (!af->addr_valid(addr, sctp_sk(sk), NULL))
return -EINVAL;
if (!sctp_sk(sk)->pf->send_verify(sctp_sk(sk), (addr)))
/* Use GFP_ATOMIC since BHs are disabled. */
addr->v4.sin_port = ntohs(addr->v4.sin_port);
- ret = sctp_add_bind_addr(bp, addr, GFP_ATOMIC);
+ ret = sctp_add_bind_addr(bp, addr, 1, GFP_ATOMIC);
addr->v4.sin_port = htons(addr->v4.sin_port);
sctp_write_unlock(&ep->base.addr_lock);
sctp_local_bh_enable();
struct sctp_chunk *chunk;
struct sctp_sockaddr_entry *laddr;
union sctp_addr *addr;
+ union sctp_addr saveaddr;
void *addr_buf;
struct sctp_af *af;
struct list_head *pos;
}
retval = sctp_send_asconf(asoc, chunk);
+ if (retval)
+ goto out;
- /* FIXME: After sending the add address ASCONF chunk, we
- * cannot append the address to the association's binding
- * address list, because the new address may be used as the
- * source of a message sent to the peer before the ASCONF
- * chunk is received by the peer. So we should wait until
- * ASCONF_ACK is received.
+ /* Add the new addresses to the bind address list with
+ * use_as_src set to 0.
*/
+ sctp_local_bh_disable();
+ sctp_write_lock(&asoc->base.addr_lock);
+ addr_buf = addrs;
+ for (i = 0; i < addrcnt; i++) {
+ addr = (union sctp_addr *)addr_buf;
+ af = sctp_get_af_specific(addr->v4.sin_family);
+ memcpy(&saveaddr, addr, af->sockaddr_len);
+ saveaddr.v4.sin_port = ntohs(saveaddr.v4.sin_port);
+ retval = sctp_add_bind_addr(bp, &saveaddr, 0,
+ GFP_ATOMIC);
+ addr_buf += af->sockaddr_len;
+ }
+ sctp_write_unlock(&asoc->base.addr_lock);
+ sctp_local_bh_enable();
}
out:
struct sctp_sock *sp;
struct sctp_endpoint *ep;
struct sctp_association *asoc;
+ struct sctp_transport *transport;
struct sctp_bind_addr *bp;
struct sctp_chunk *chunk;
union sctp_addr *laddr;
+ union sctp_addr saveaddr;
void *addr_buf;
struct sctp_af *af;
- struct list_head *pos;
+ struct list_head *pos, *pos1;
+ struct sctp_sockaddr_entry *saddr;
int i;
int retval = 0;
goto out;
}
- retval = sctp_send_asconf(asoc, chunk);
+ /* Reset use_as_src flag for the addresses in the bind address
+ * list that are to be deleted.
+ */
+ sctp_local_bh_disable();
+ sctp_write_lock(&asoc->base.addr_lock);
+ addr_buf = addrs;
+ for (i = 0; i < addrcnt; i++) {
+ laddr = (union sctp_addr *)addr_buf;
+ af = sctp_get_af_specific(laddr->v4.sin_family);
+ memcpy(&saveaddr, laddr, af->sockaddr_len);
+ saveaddr.v4.sin_port = ntohs(saveaddr.v4.sin_port);
+ list_for_each(pos1, &bp->address_list) {
+ saddr = list_entry(pos1,
+ struct sctp_sockaddr_entry,
+ list);
+ if (sctp_cmp_addr_exact(&saddr->a, &saveaddr))
+ saddr->use_as_src = 0;
+ }
+ addr_buf += af->sockaddr_len;
+ }
+ sctp_write_unlock(&asoc->base.addr_lock);
+ sctp_local_bh_enable();
- /* FIXME: After sending the delete address ASCONF chunk, we
- * cannot remove the addresses from the association's bind
- * address list, because there maybe some packet send to
- * the delete addresses, so we should wait until ASCONF_ACK
- * packet is received.
+ /* Update the route and saddr entries for all the transports
+ * as some of the addresses in the bind address list are
+ * about to be deleted and cannot be used as source addresses.
*/
+ list_for_each(pos1, &asoc->peer.transport_addr_list) {
+ transport = list_entry(pos1, struct sctp_transport,
+ transports);
+ dst_release(transport->dst);
+ sctp_transport_route(transport, NULL,
+ sctp_sk(asoc->base.sk));
+ }
+
+ retval = sctp_send_asconf(asoc, chunk);
}
out:
return retval;
return -EFAULT;
/* Alloc space for the address array in kernel memory. */
- kaddrs = (struct sockaddr *)kmalloc(addrs_size, GFP_KERNEL);
+ kaddrs = kmalloc(addrs_size, GFP_KERNEL);
if (unlikely(!kaddrs))
return -ENOMEM;
err = -EAGAIN;
goto out_free;
}
+ } else {
+ /*
+ * If an unprivileged user inherits a 1-many
+ * style socket with open associations on a
+ * privileged port, it MAY be permitted to
+ * accept new associations, but it SHOULD NOT
+ * be permitted to open new associations.
+ */
+ if (ep->base.bind_addr.port < PROT_SOCK &&
+ !capable(CAP_NET_BIND_SERVICE)) {
+ err = -EACCES;
+ goto out_free;
+ }
}
scope = sctp_scope(&to);
inet_sk(sk)->dport = htons(asoc->peer.port);
af = sctp_get_af_specific(to.sa.sa_family);
af->to_sk_daddr(&to, sk);
+ sk->sk_err = 0;
timeo = sock_sndtimeo(sk, sk->sk_socket->file->f_flags & O_NONBLOCK);
err = sctp_wait_for_connect(asoc, &timeo);
return -EFAULT;
/* Alloc space for the address array in kernel memory. */
- kaddrs = (struct sockaddr *)kmalloc(addrs_size, GFP_KERNEL);
+ kaddrs = kmalloc(addrs_size, GFP_KERNEL);
if (unlikely(!kaddrs))
return -ENOMEM;
ep = sctp_sk(sk)->ep;
- /* Walk all associations on a socket, not on an endpoint. */
+ /* Walk all associations on an endpoint. */
list_for_each_safe(pos, temp, &ep->asocs) {
asoc = list_entry(pos, struct sctp_association, asocs);
if (sctp_state(asoc, CLOSED)) {
sctp_unhash_established(asoc);
sctp_association_free(asoc);
+ continue;
+ }
+ }
- } else if (sock_flag(sk, SOCK_LINGER) &&
- !sk->sk_lingertime)
- sctp_primitive_ABORT(asoc, NULL);
- else
- sctp_primitive_SHUTDOWN(asoc, NULL);
- } else
+ if (sock_flag(sk, SOCK_LINGER) && !sk->sk_lingertime)
+ sctp_primitive_ABORT(asoc, NULL);
+ else
sctp_primitive_SHUTDOWN(asoc, NULL);
}
err = -EAGAIN;
goto out_unlock;
}
+ } else {
+ /*
+ * If an unprivileged user inherits a one-to-many
+ * style socket with open associations on a privileged
+ * port, it MAY be permitted to accept new associations,
+ * but it SHOULD NOT be permitted to open new
+ * associations.
+ */
+ if (ep->base.bind_addr.port < PROT_SOCK &&
+ !capable(CAP_NET_BIND_SERVICE)) {
+ err = -EACCES;
+ goto out_unlock;
+ }
}
scope = sctp_scope(&to);
if (copy_from_user(&sp->autoclose, optval, optlen))
return -EFAULT;
- sp->ep->timeouts[SCTP_EVENT_TIMEOUT_AUTOCLOSE] = sp->autoclose * HZ;
return 0;
}
* address's parameters:
*
* struct sctp_paddrparams {
- * sctp_assoc_t spp_assoc_id;
- * struct sockaddr_storage spp_address;
- * uint32_t spp_hbinterval;
- * uint16_t spp_pathmaxrxt;
- * };
- *
- * spp_assoc_id - (UDP style socket) This is filled in the application,
- * and identifies the association for this query.
+ * sctp_assoc_t spp_assoc_id;
+ * struct sockaddr_storage spp_address;
+ * uint32_t spp_hbinterval;
+ * uint16_t spp_pathmaxrxt;
+ * uint32_t spp_pathmtu;
+ * uint32_t spp_sackdelay;
+ * uint32_t spp_flags;
+ * };
+ *
+ * spp_assoc_id - (one-to-many style socket) This is filled in the
+ * application, and identifies the association for
+ * this query.
* spp_address - This specifies which address is of interest.
* spp_hbinterval - This contains the value of the heartbeat interval,
- * in milliseconds. A value of 0, when modifying the
- * parameter, specifies that the heartbeat on this
- * address should be disabled. A value of UINT32_MAX
- * (4294967295), when modifying the parameter,
- * specifies that a heartbeat should be sent
- * immediately to the peer address, and the current
- * interval should remain unchanged.
+ * in milliseconds. If a value of zero
+ * is present in this field then no changes are to
+ * be made to this parameter.
* spp_pathmaxrxt - This contains the maximum number of
* retransmissions before this address shall be
- * considered unreachable.
+ * considered unreachable. If a value of zero
+ * is present in this field then no changes are to
+ * be made to this parameter.
+ * spp_pathmtu - When Path MTU discovery is disabled the value
+ * specified here will be the "fixed" path mtu.
+ * Note that if the spp_address field is empty
+ * then all associations on this address will
+ * have this fixed path mtu set upon them.
+ *
+ * spp_sackdelay - When delayed sack is enabled, this value specifies
+ * the number of milliseconds that sacks will be delayed
+ * for. This value will apply to all addresses of an
+ * association if the spp_address field is empty. Note
+ * also, that if delayed sack is enabled and this
+ * value is set to 0, no change is made to the last
+ * recorded delayed sack timer value.
+ *
+ * spp_flags - These flags are used to control various features
+ * on an association. The flag field may contain
+ * zero or more of the following options.
+ *
+ * SPP_HB_ENABLE - Enable heartbeats on the
+ * specified address. Note that if the address
+ * field is empty all addresses for the association
+ * have heartbeats enabled upon them.
+ *
+ * SPP_HB_DISABLE - Disable heartbeats on the
+ * speicifed address. Note that if the address
+ * field is empty all addresses for the association
+ * will have their heartbeats disabled. Note also
+ * that SPP_HB_ENABLE and SPP_HB_DISABLE are
+ * mutually exclusive, only one of these two should
+ * be specified. Enabling both fields will have
+ * undetermined results.
+ *
+ * SPP_HB_DEMAND - Request a user initiated heartbeat
+ * to be made immediately.
+ *
+ * SPP_PMTUD_ENABLE - This field will enable PMTU
+ * discovery upon the specified address. Note that
+ * if the address feild is empty then all addresses
+ * on the association are effected.
+ *
+ * SPP_PMTUD_DISABLE - This field will disable PMTU
+ * discovery upon the specified address. Note that
+ * if the address feild is empty then all addresses
+ * on the association are effected. Not also that
+ * SPP_PMTUD_ENABLE and SPP_PMTUD_DISABLE are mutually
+ * exclusive. Enabling both will have undetermined
+ * results.
+ *
+ * SPP_SACKDELAY_ENABLE - Setting this flag turns
+ * on delayed sack. The time specified in spp_sackdelay
+ * is used to specify the sack delay for this address. Note
+ * that if spp_address is empty then all addresses will
+ * enable delayed sack and take on the sack delay
+ * value specified in spp_sackdelay.
+ * SPP_SACKDELAY_DISABLE - Setting this flag turns
+ * off delayed sack. If the spp_address field is blank then
+ * delayed sack is disabled for the entire association. Note
+ * also that this field is mutually exclusive to
+ * SPP_SACKDELAY_ENABLE, setting both will have undefined
+ * results.
*/
+int sctp_apply_peer_addr_params(struct sctp_paddrparams *params,
+ struct sctp_transport *trans,
+ struct sctp_association *asoc,
+ struct sctp_sock *sp,
+ int hb_change,
+ int pmtud_change,
+ int sackdelay_change)
+{
+ int error;
+
+ if (params->spp_flags & SPP_HB_DEMAND && trans) {
+ error = sctp_primitive_REQUESTHEARTBEAT (trans->asoc, trans);
+ if (error)
+ return error;
+ }
+
+ if (params->spp_hbinterval) {
+ if (trans) {
+ trans->hbinterval = msecs_to_jiffies(params->spp_hbinterval);
+ } else if (asoc) {
+ asoc->hbinterval = msecs_to_jiffies(params->spp_hbinterval);
+ } else {
+ sp->hbinterval = params->spp_hbinterval;
+ }
+ }
+
+ if (hb_change) {
+ if (trans) {
+ trans->param_flags =
+ (trans->param_flags & ~SPP_HB) | hb_change;
+ } else if (asoc) {
+ asoc->param_flags =
+ (asoc->param_flags & ~SPP_HB) | hb_change;
+ } else {
+ sp->param_flags =
+ (sp->param_flags & ~SPP_HB) | hb_change;
+ }
+ }
+
+ if (params->spp_pathmtu) {
+ if (trans) {
+ trans->pathmtu = params->spp_pathmtu;
+ sctp_assoc_sync_pmtu(asoc);
+ } else if (asoc) {
+ asoc->pathmtu = params->spp_pathmtu;
+ sctp_frag_point(sp, params->spp_pathmtu);
+ } else {
+ sp->pathmtu = params->spp_pathmtu;
+ }
+ }
+
+ if (pmtud_change) {
+ if (trans) {
+ int update = (trans->param_flags & SPP_PMTUD_DISABLE) &&
+ (params->spp_flags & SPP_PMTUD_ENABLE);
+ trans->param_flags =
+ (trans->param_flags & ~SPP_PMTUD) | pmtud_change;
+ if (update) {
+ sctp_transport_pmtu(trans);
+ sctp_assoc_sync_pmtu(asoc);
+ }
+ } else if (asoc) {
+ asoc->param_flags =
+ (asoc->param_flags & ~SPP_PMTUD) | pmtud_change;
+ } else {
+ sp->param_flags =
+ (sp->param_flags & ~SPP_PMTUD) | pmtud_change;
+ }
+ }
+
+ if (params->spp_sackdelay) {
+ if (trans) {
+ trans->sackdelay =
+ msecs_to_jiffies(params->spp_sackdelay);
+ } else if (asoc) {
+ asoc->sackdelay =
+ msecs_to_jiffies(params->spp_sackdelay);
+ } else {
+ sp->sackdelay = params->spp_sackdelay;
+ }
+ }
+
+ if (sackdelay_change) {
+ if (trans) {
+ trans->param_flags =
+ (trans->param_flags & ~SPP_SACKDELAY) |
+ sackdelay_change;
+ } else if (asoc) {
+ asoc->param_flags =
+ (asoc->param_flags & ~SPP_SACKDELAY) |
+ sackdelay_change;
+ } else {
+ sp->param_flags =
+ (sp->param_flags & ~SPP_SACKDELAY) |
+ sackdelay_change;
+ }
+ }
+
+ if (params->spp_pathmaxrxt) {
+ if (trans) {
+ trans->pathmaxrxt = params->spp_pathmaxrxt;
+ } else if (asoc) {
+ asoc->pathmaxrxt = params->spp_pathmaxrxt;
+ } else {
+ sp->pathmaxrxt = params->spp_pathmaxrxt;
+ }
+ }
+
+ return 0;
+}
+
static int sctp_setsockopt_peer_addr_params(struct sock *sk,
char __user *optval, int optlen)
{
- struct sctp_paddrparams params;
- struct sctp_transport *trans;
+ struct sctp_paddrparams params;
+ struct sctp_transport *trans = NULL;
+ struct sctp_association *asoc = NULL;
+ struct sctp_sock *sp = sctp_sk(sk);
int error;
+ int hb_change, pmtud_change, sackdelay_change;
if (optlen != sizeof(struct sctp_paddrparams))
- return -EINVAL;
+ return - EINVAL;
+
if (copy_from_user(¶ms, optval, optlen))
return -EFAULT;
- /*
- * API 7. Socket Options (setting the default value for the endpoint)
- * All options that support specific settings on an association by
- * filling in either an association id variable or a sockaddr_storage
- * SHOULD also support setting of the same value for the entire endpoint
- * (i.e. future associations). To accomplish this the following logic is
- * used when setting one of these options:
-
- * c) If neither the sockaddr_storage or association identification is
- * set i.e. the sockaddr_storage is set to all 0's (INADDR_ANY) and
- * the association identification is 0, the settings are a default
- * and to be applied to the endpoint (all future associations).
- */
+ /* Validate flags and value parameters. */
+ hb_change = params.spp_flags & SPP_HB;
+ pmtud_change = params.spp_flags & SPP_PMTUD;
+ sackdelay_change = params.spp_flags & SPP_SACKDELAY;
+
+ if (hb_change == SPP_HB ||
+ pmtud_change == SPP_PMTUD ||
+ sackdelay_change == SPP_SACKDELAY ||
+ params.spp_sackdelay > 500 ||
+ (params.spp_pathmtu
+ && params.spp_pathmtu < SCTP_DEFAULT_MINSEGMENT))
+ return -EINVAL;
- /* update default value for endpoint (all future associations) */
- if (!params.spp_assoc_id &&
- sctp_is_any(( union sctp_addr *)¶ms.spp_address)) {
- /* Manual heartbeat on an endpoint is invalid. */
- if (0xffffffff == params.spp_hbinterval)
+ /* If an address other than INADDR_ANY is specified, and
+ * no transport is found, then the request is invalid.
+ */
+ if (!sctp_is_any(( union sctp_addr *)¶ms.spp_address)) {
+ trans = sctp_addr_id2transport(sk, ¶ms.spp_address,
+ params.spp_assoc_id);
+ if (!trans)
return -EINVAL;
- else if (params.spp_hbinterval)
- sctp_sk(sk)->paddrparam.spp_hbinterval =
- params.spp_hbinterval;
- if (params.spp_pathmaxrxt)
- sctp_sk(sk)->paddrparam.spp_pathmaxrxt =
- params.spp_pathmaxrxt;
- return 0;
}
- trans = sctp_addr_id2transport(sk, ¶ms.spp_address,
- params.spp_assoc_id);
- if (!trans)
+ /* Get association, if assoc_id != 0 and the socket is a one
+ * to many style socket, and an association was not found, then
+ * the id was invalid.
+ */
+ asoc = sctp_id2assoc(sk, params.spp_assoc_id);
+ if (!asoc && params.spp_assoc_id && sctp_style(sk, UDP))
return -EINVAL;
- /* Applications can enable or disable heartbeats for any peer address
- * of an association, modify an address's heartbeat interval, force a
- * heartbeat to be sent immediately, and adjust the address's maximum
- * number of retransmissions sent before an address is considered
- * unreachable.
- *
- * The value of the heartbeat interval, in milliseconds. A value of
- * UINT32_MAX (4294967295), when modifying the parameter, specifies
- * that a heartbeat should be sent immediately to the peer address,
- * and the current interval should remain unchanged.
+ /* Heartbeat demand can only be sent on a transport or
+ * association, but not a socket.
*/
- if (0xffffffff == params.spp_hbinterval) {
- error = sctp_primitive_REQUESTHEARTBEAT (trans->asoc, trans);
- if (error)
- return error;
- } else {
- /* The value of the heartbeat interval, in milliseconds. A value of 0,
- * when modifying the parameter, specifies that the heartbeat on this
- * address should be disabled.
+ if (params.spp_flags & SPP_HB_DEMAND && !trans && !asoc)
+ return -EINVAL;
+
+ /* Process parameters. */
+ error = sctp_apply_peer_addr_params(¶ms, trans, asoc, sp,
+ hb_change, pmtud_change,
+ sackdelay_change);
+
+ if (error)
+ return error;
+
+ /* If changes are for association, also apply parameters to each
+ * transport.
*/
- if (params.spp_hbinterval) {
- trans->hb_allowed = 1;
- trans->hb_interval =
- msecs_to_jiffies(params.spp_hbinterval);
- } else
- trans->hb_allowed = 0;
+ if (!trans && asoc) {
+ struct list_head *pos;
+
+ list_for_each(pos, &asoc->peer.transport_addr_list) {
+ trans = list_entry(pos, struct sctp_transport,
+ transports);
+ sctp_apply_peer_addr_params(¶ms, trans, asoc, sp,
+ hb_change, pmtud_change,
+ sackdelay_change);
+ }
}
- /* spp_pathmaxrxt contains the maximum number of retransmissions
- * before this address shall be considered unreachable.
- */
- if (params.spp_pathmaxrxt)
- trans->max_retrans = params.spp_pathmaxrxt;
+ return 0;
+}
+/* 7.1.24. Delayed Ack Timer (SCTP_DELAYED_ACK_TIME)
+ *
+ * This options will get or set the delayed ack timer. The time is set
+ * in milliseconds. If the assoc_id is 0, then this sets or gets the
+ * endpoints default delayed ack timer value. If the assoc_id field is
+ * non-zero, then the set or get effects the specified association.
+ *
+ * struct sctp_assoc_value {
+ * sctp_assoc_t assoc_id;
+ * uint32_t assoc_value;
+ * };
+ *
+ * assoc_id - This parameter, indicates which association the
+ * user is preforming an action upon. Note that if
+ * this field's value is zero then the endpoints
+ * default value is changed (effecting future
+ * associations only).
+ *
+ * assoc_value - This parameter contains the number of milliseconds
+ * that the user is requesting the delayed ACK timer
+ * be set to. Note that this value is defined in
+ * the standard to be between 200 and 500 milliseconds.
+ *
+ * Note: a value of zero will leave the value alone,
+ * but disable SACK delay. A non-zero value will also
+ * enable SACK delay.
+ */
+
+static int sctp_setsockopt_delayed_ack_time(struct sock *sk,
+ char __user *optval, int optlen)
+{
+ struct sctp_assoc_value params;
+ struct sctp_transport *trans = NULL;
+ struct sctp_association *asoc = NULL;
+ struct sctp_sock *sp = sctp_sk(sk);
+
+ if (optlen != sizeof(struct sctp_assoc_value))
+ return - EINVAL;
+
+ if (copy_from_user(¶ms, optval, optlen))
+ return -EFAULT;
+
+ /* Validate value parameter. */
+ if (params.assoc_value > 500)
+ return -EINVAL;
+
+ /* Get association, if assoc_id != 0 and the socket is a one
+ * to many style socket, and an association was not found, then
+ * the id was invalid.
+ */
+ asoc = sctp_id2assoc(sk, params.assoc_id);
+ if (!asoc && params.assoc_id && sctp_style(sk, UDP))
+ return -EINVAL;
+
+ if (params.assoc_value) {
+ if (asoc) {
+ asoc->sackdelay =
+ msecs_to_jiffies(params.assoc_value);
+ asoc->param_flags =
+ (asoc->param_flags & ~SPP_SACKDELAY) |
+ SPP_SACKDELAY_ENABLE;
+ } else {
+ sp->sackdelay = params.assoc_value;
+ sp->param_flags =
+ (sp->param_flags & ~SPP_SACKDELAY) |
+ SPP_SACKDELAY_ENABLE;
+ }
+ } else {
+ if (asoc) {
+ asoc->param_flags =
+ (asoc->param_flags & ~SPP_SACKDELAY) |
+ SPP_SACKDELAY_DISABLE;
+ } else {
+ sp->param_flags =
+ (sp->param_flags & ~SPP_SACKDELAY) |
+ SPP_SACKDELAY_DISABLE;
+ }
+ }
+
+ /* If change is for association, also apply to each transport. */
+ if (asoc) {
+ struct list_head *pos;
+
+ list_for_each(pos, &asoc->peer.transport_addr_list) {
+ trans = list_entry(pos, struct sctp_transport,
+ transports);
+ if (params.assoc_value) {
+ trans->sackdelay =
+ msecs_to_jiffies(params.assoc_value);
+ trans->param_flags =
+ (trans->param_flags & ~SPP_SACKDELAY) |
+ SPP_SACKDELAY_ENABLE;
+ } else {
+ trans->param_flags =
+ (trans->param_flags & ~SPP_SACKDELAY) |
+ SPP_SACKDELAY_DISABLE;
+ }
+ }
+ }
+
return 0;
}
/* Set the values to the specific association */
if (asoc) {
- if (assocparams.sasoc_asocmaxrxt != 0)
+ if (assocparams.sasoc_asocmaxrxt != 0) {
+ __u32 path_sum = 0;
+ int paths = 0;
+ struct list_head *pos;
+ struct sctp_transport *peer_addr;
+
+ list_for_each(pos, &asoc->peer.transport_addr_list) {
+ peer_addr = list_entry(pos,
+ struct sctp_transport,
+ transports);
+ path_sum += peer_addr->pathmaxrxt;
+ paths++;
+ }
+
+ /* Only validate asocmaxrxt if we have more then
+ * one path/transport. We do this because path
+ * retransmissions are only counted when we have more
+ * then one path.
+ */
+ if (paths > 1 &&
+ assocparams.sasoc_asocmaxrxt > path_sum)
+ return -EINVAL;
+
asoc->max_retrans = assocparams.sasoc_asocmaxrxt;
+ }
+
if (assocparams.sasoc_cookie_life != 0) {
asoc->cookie_life.tv_sec =
assocparams.sasoc_cookie_life / 1000;
return -EINVAL;
if (get_user(val, (int __user *)optval))
return -EFAULT;
- if ((val < 8) || (val > SCTP_MAX_CHUNK_LEN))
+ if ((val != 0) && ((val < 8) || (val > SCTP_MAX_CHUNK_LEN)))
return -EINVAL;
sp->user_frag = val;
- if (val) {
- /* Update the frag_point of the existing associations. */
- list_for_each(pos, &(sp->ep->asocs)) {
- asoc = list_entry(pos, struct sctp_association, asocs);
- asoc->frag_point = sctp_frag_point(sp, asoc->pmtu);
- }
+ /* Update the frag_point of the existing associations. */
+ list_for_each(pos, &(sp->ep->asocs)) {
+ asoc = list_entry(pos, struct sctp_association, asocs);
+ asoc->frag_point = sctp_frag_point(sp, asoc->pathmtu);
}
return 0;
static int sctp_setsockopt_adaption_layer(struct sock *sk, char __user *optval,
int optlen)
{
- __u32 val;
+ struct sctp_setadaption adaption;
- if (optlen < sizeof(__u32))
+ if (optlen != sizeof(struct sctp_setadaption))
return -EINVAL;
- if (copy_from_user(&val, optval, sizeof(__u32)))
+ if (copy_from_user(&adaption, optval, optlen))
return -EFAULT;
- sctp_sk(sk)->adaption_ind = val;
+ sctp_sk(sk)->adaption_ind = adaption.ssb_adaption_ind;
return 0;
}
retval = sctp_setsockopt_peer_addr_params(sk, optval, optlen);
break;
+ case SCTP_DELAYED_ACK_TIME:
+ retval = sctp_setsockopt_delayed_ack_time(sk, optval, optlen);
+ break;
+
case SCTP_INITMSG:
retval = sctp_setsockopt_initmsg(sk, optval, optlen);
break;
/* Default Peer Address Parameters. These defaults can
* be modified via SCTP_PEER_ADDR_PARAMS
*/
- sp->paddrparam.spp_hbinterval = jiffies_to_msecs(sctp_hb_interval);
- sp->paddrparam.spp_pathmaxrxt = sctp_max_retrans_path;
+ sp->hbinterval = jiffies_to_msecs(sctp_hb_interval);
+ sp->pathmaxrxt = sctp_max_retrans_path;
+ sp->pathmtu = 0; // allow default discovery
+ sp->sackdelay = jiffies_to_msecs(sctp_sack_timeout);
+ sp->param_flags = SPP_HB_ENABLE |
+ SPP_PMTUD_ENABLE |
+ SPP_SACKDELAY_ENABLE;
/* If enabled no SCTP message fragmentation will be performed.
* Configure through SCTP_DISABLE_FRAGMENTS socket option.
status.sstat_primary.spinfo_cwnd = transport->cwnd;
status.sstat_primary.spinfo_srtt = transport->srtt;
status.sstat_primary.spinfo_rto = jiffies_to_msecs(transport->rto);
- status.sstat_primary.spinfo_mtu = transport->pmtu;
+ status.sstat_primary.spinfo_mtu = transport->pathmtu;
if (status.sstat_primary.spinfo_state == SCTP_UNKNOWN)
status.sstat_primary.spinfo_state = SCTP_ACTIVE;
pinfo.spinfo_cwnd = transport->cwnd;
pinfo.spinfo_srtt = transport->srtt;
pinfo.spinfo_rto = jiffies_to_msecs(transport->rto);
- pinfo.spinfo_mtu = transport->pmtu;
+ pinfo.spinfo_mtu = transport->pathmtu;
if (pinfo.spinfo_state == SCTP_UNKNOWN)
pinfo.spinfo_state = SCTP_ACTIVE;
* address's parameters:
*
* struct sctp_paddrparams {
- * sctp_assoc_t spp_assoc_id;
- * struct sockaddr_storage spp_address;
- * uint32_t spp_hbinterval;
- * uint16_t spp_pathmaxrxt;
- * };
- *
- * spp_assoc_id - (UDP style socket) This is filled in the application,
- * and identifies the association for this query.
+ * sctp_assoc_t spp_assoc_id;
+ * struct sockaddr_storage spp_address;
+ * uint32_t spp_hbinterval;
+ * uint16_t spp_pathmaxrxt;
+ * uint32_t spp_pathmtu;
+ * uint32_t spp_sackdelay;
+ * uint32_t spp_flags;
+ * };
+ *
+ * spp_assoc_id - (one-to-many style socket) This is filled in the
+ * application, and identifies the association for
+ * this query.
* spp_address - This specifies which address is of interest.
* spp_hbinterval - This contains the value of the heartbeat interval,
- * in milliseconds. A value of 0, when modifying the
- * parameter, specifies that the heartbeat on this
- * address should be disabled. A value of UINT32_MAX
- * (4294967295), when modifying the parameter,
- * specifies that a heartbeat should be sent
- * immediately to the peer address, and the current
- * interval should remain unchanged.
+ * in milliseconds. If a value of zero
+ * is present in this field then no changes are to
+ * be made to this parameter.
* spp_pathmaxrxt - This contains the maximum number of
* retransmissions before this address shall be
- * considered unreachable.
+ * considered unreachable. If a value of zero
+ * is present in this field then no changes are to
+ * be made to this parameter.
+ * spp_pathmtu - When Path MTU discovery is disabled the value
+ * specified here will be the "fixed" path mtu.
+ * Note that if the spp_address field is empty
+ * then all associations on this address will
+ * have this fixed path mtu set upon them.
+ *
+ * spp_sackdelay - When delayed sack is enabled, this value specifies
+ * the number of milliseconds that sacks will be delayed
+ * for. This value will apply to all addresses of an
+ * association if the spp_address field is empty. Note
+ * also, that if delayed sack is enabled and this
+ * value is set to 0, no change is made to the last
+ * recorded delayed sack timer value.
+ *
+ * spp_flags - These flags are used to control various features
+ * on an association. The flag field may contain
+ * zero or more of the following options.
+ *
+ * SPP_HB_ENABLE - Enable heartbeats on the
+ * specified address. Note that if the address
+ * field is empty all addresses for the association
+ * have heartbeats enabled upon them.
+ *
+ * SPP_HB_DISABLE - Disable heartbeats on the
+ * speicifed address. Note that if the address
+ * field is empty all addresses for the association
+ * will have their heartbeats disabled. Note also
+ * that SPP_HB_ENABLE and SPP_HB_DISABLE are
+ * mutually exclusive, only one of these two should
+ * be specified. Enabling both fields will have
+ * undetermined results.
+ *
+ * SPP_HB_DEMAND - Request a user initiated heartbeat
+ * to be made immediately.
+ *
+ * SPP_PMTUD_ENABLE - This field will enable PMTU
+ * discovery upon the specified address. Note that
+ * if the address feild is empty then all addresses
+ * on the association are effected.
+ *
+ * SPP_PMTUD_DISABLE - This field will disable PMTU
+ * discovery upon the specified address. Note that
+ * if the address feild is empty then all addresses
+ * on the association are effected. Not also that
+ * SPP_PMTUD_ENABLE and SPP_PMTUD_DISABLE are mutually
+ * exclusive. Enabling both will have undetermined
+ * results.
+ *
+ * SPP_SACKDELAY_ENABLE - Setting this flag turns
+ * on delayed sack. The time specified in spp_sackdelay
+ * is used to specify the sack delay for this address. Note
+ * that if spp_address is empty then all addresses will
+ * enable delayed sack and take on the sack delay
+ * value specified in spp_sackdelay.
+ * SPP_SACKDELAY_DISABLE - Setting this flag turns
+ * off delayed sack. If the spp_address field is blank then
+ * delayed sack is disabled for the entire association. Note
+ * also that this field is mutually exclusive to
+ * SPP_SACKDELAY_ENABLE, setting both will have undefined
+ * results.
*/
static int sctp_getsockopt_peer_addr_params(struct sock *sk, int len,
- char __user *optval, int __user *optlen)
+ char __user *optval, int __user *optlen)
{
- struct sctp_paddrparams params;
- struct sctp_transport *trans;
+ struct sctp_paddrparams params;
+ struct sctp_transport *trans = NULL;
+ struct sctp_association *asoc = NULL;
+ struct sctp_sock *sp = sctp_sk(sk);
if (len != sizeof(struct sctp_paddrparams))
return -EINVAL;
+
if (copy_from_user(¶ms, optval, len))
return -EFAULT;
- /* If no association id is specified retrieve the default value
- * for the endpoint that will be used for all future associations
+ /* If an address other than INADDR_ANY is specified, and
+ * no transport is found, then the request is invalid.
*/
- if (!params.spp_assoc_id &&
- sctp_is_any(( union sctp_addr *)¶ms.spp_address)) {
- params.spp_hbinterval = sctp_sk(sk)->paddrparam.spp_hbinterval;
- params.spp_pathmaxrxt = sctp_sk(sk)->paddrparam.spp_pathmaxrxt;
-
- goto done;
+ if (!sctp_is_any(( union sctp_addr *)¶ms.spp_address)) {
+ trans = sctp_addr_id2transport(sk, ¶ms.spp_address,
+ params.spp_assoc_id);
+ if (!trans) {
+ SCTP_DEBUG_PRINTK("Failed no transport\n");
+ return -EINVAL;
+ }
}
- trans = sctp_addr_id2transport(sk, ¶ms.spp_address,
- params.spp_assoc_id);
- if (!trans)
+ /* Get association, if assoc_id != 0 and the socket is a one
+ * to many style socket, and an association was not found, then
+ * the id was invalid.
+ */
+ asoc = sctp_id2assoc(sk, params.spp_assoc_id);
+ if (!asoc && params.spp_assoc_id && sctp_style(sk, UDP)) {
+ SCTP_DEBUG_PRINTK("Failed no association\n");
return -EINVAL;
+ }
- /* The value of the heartbeat interval, in milliseconds. A value of 0,
- * when modifying the parameter, specifies that the heartbeat on this
- * address should be disabled.
- */
- if (!trans->hb_allowed)
- params.spp_hbinterval = 0;
- else
- params.spp_hbinterval = jiffies_to_msecs(trans->hb_interval);
+ if (trans) {
+ /* Fetch transport values. */
+ params.spp_hbinterval = jiffies_to_msecs(trans->hbinterval);
+ params.spp_pathmtu = trans->pathmtu;
+ params.spp_pathmaxrxt = trans->pathmaxrxt;
+ params.spp_sackdelay = jiffies_to_msecs(trans->sackdelay);
+
+ /*draft-11 doesn't say what to return in spp_flags*/
+ params.spp_flags = trans->param_flags;
+ } else if (asoc) {
+ /* Fetch association values. */
+ params.spp_hbinterval = jiffies_to_msecs(asoc->hbinterval);
+ params.spp_pathmtu = asoc->pathmtu;
+ params.spp_pathmaxrxt = asoc->pathmaxrxt;
+ params.spp_sackdelay = jiffies_to_msecs(asoc->sackdelay);
+
+ /*draft-11 doesn't say what to return in spp_flags*/
+ params.spp_flags = asoc->param_flags;
+ } else {
+ /* Fetch socket values. */
+ params.spp_hbinterval = sp->hbinterval;
+ params.spp_pathmtu = sp->pathmtu;
+ params.spp_sackdelay = sp->sackdelay;
+ params.spp_pathmaxrxt = sp->pathmaxrxt;
+
+ /*draft-11 doesn't say what to return in spp_flags*/
+ params.spp_flags = sp->param_flags;
+ }
- /* spp_pathmaxrxt contains the maximum number of retransmissions
- * before this address shall be considered unreachable.
- */
- params.spp_pathmaxrxt = trans->max_retrans;
+ if (copy_to_user(optval, ¶ms, len))
+ return -EFAULT;
+
+ if (put_user(len, optlen))
+ return -EFAULT;
+
+ return 0;
+}
+
+/* 7.1.24. Delayed Ack Timer (SCTP_DELAYED_ACK_TIME)
+ *
+ * This options will get or set the delayed ack timer. The time is set
+ * in milliseconds. If the assoc_id is 0, then this sets or gets the
+ * endpoints default delayed ack timer value. If the assoc_id field is
+ * non-zero, then the set or get effects the specified association.
+ *
+ * struct sctp_assoc_value {
+ * sctp_assoc_t assoc_id;
+ * uint32_t assoc_value;
+ * };
+ *
+ * assoc_id - This parameter, indicates which association the
+ * user is preforming an action upon. Note that if
+ * this field's value is zero then the endpoints
+ * default value is changed (effecting future
+ * associations only).
+ *
+ * assoc_value - This parameter contains the number of milliseconds
+ * that the user is requesting the delayed ACK timer
+ * be set to. Note that this value is defined in
+ * the standard to be between 200 and 500 milliseconds.
+ *
+ * Note: a value of zero will leave the value alone,
+ * but disable SACK delay. A non-zero value will also
+ * enable SACK delay.
+ */
+static int sctp_getsockopt_delayed_ack_time(struct sock *sk, int len,
+ char __user *optval,
+ int __user *optlen)
+{
+ struct sctp_assoc_value params;
+ struct sctp_association *asoc = NULL;
+ struct sctp_sock *sp = sctp_sk(sk);
+
+ if (len != sizeof(struct sctp_assoc_value))
+ return - EINVAL;
+
+ if (copy_from_user(¶ms, optval, len))
+ return -EFAULT;
+
+ /* Get association, if assoc_id != 0 and the socket is a one
+ * to many style socket, and an association was not found, then
+ * the id was invalid.
+ */
+ asoc = sctp_id2assoc(sk, params.assoc_id);
+ if (!asoc && params.assoc_id && sctp_style(sk, UDP))
+ return -EINVAL;
+
+ if (asoc) {
+ /* Fetch association values. */
+ if (asoc->param_flags & SPP_SACKDELAY_ENABLE)
+ params.assoc_value = jiffies_to_msecs(
+ asoc->sackdelay);
+ else
+ params.assoc_value = 0;
+ } else {
+ /* Fetch socket values. */
+ if (sp->param_flags & SPP_SACKDELAY_ENABLE)
+ params.assoc_value = sp->sackdelay;
+ else
+ params.assoc_value = 0;
+ }
-done:
if (copy_to_user(optval, ¶ms, len))
return -EFAULT;
}
static int sctp_copy_laddrs_to_user(struct sock *sk, __u16 port,
- void * __user *to, size_t space_left)
+ void __user **to, size_t space_left)
{
struct list_head *pos;
struct sctp_sockaddr_entry *addr;
static int sctp_getsockopt_adaption_layer(struct sock *sk, int len,
char __user *optval, int __user *optlen)
{
- __u32 val;
+ struct sctp_setadaption adaption;
- if (len < sizeof(__u32))
+ if (len != sizeof(struct sctp_setadaption))
return -EINVAL;
- len = sizeof(__u32);
- val = sctp_sk(sk)->adaption_ind;
- if (put_user(len, optlen))
- return -EFAULT;
- if (copy_to_user(optval, &val, len))
+ adaption.ssb_adaption_ind = sctp_sk(sk)->adaption_ind;
+ if (copy_to_user(optval, &adaption, len))
return -EFAULT;
+
return 0;
}
retval = sctp_getsockopt_peer_addr_params(sk, len, optval,
optlen);
break;
+ case SCTP_DELAYED_ACK_TIME:
+ retval = sctp_getsockopt_delayed_ack_time(sk, len, optval,
+ optlen);
+ break;
case SCTP_INITMSG:
retval = sctp_getsockopt_initmsg(sk, len, optval, optlen);
break;
* tcp_poll(). Note that, based on these implementations, we don't
* lock the socket in this function, even though it seems that,
* ideally, locking or some other mechanisms can be used to ensure
- * the integrity of the counters (sndbuf and wmem_queued) used
+ * the integrity of the counters (sndbuf and wmem_alloc) used
* in this place. We assume that we don't need locks either until proven
* otherwise.
*
/* Is there any exceptional events? */
if (sk->sk_err || !skb_queue_empty(&sk->sk_error_queue))
mask |= POLLERR;
+ if (sk->sk_shutdown & RCV_SHUTDOWN)
+ mask |= POLLRDHUP;
if (sk->sk_shutdown == SHUTDOWN_MASK)
mask |= POLLHUP;
/* Caller must hold hashbucket lock for this tb with local BH disabled */
static void sctp_bucket_destroy(struct sctp_bind_bucket *pp)
{
- if (hlist_empty(&pp->owner)) {
+ if (pp && hlist_empty(&pp->owner)) {
if (pp->next)
pp->next->pprev = pp->pprev;
*(pp->pprev) = pp->next;
struct sk_buff *skb;
long timeo;
- /* Caller is allowed not to check sk->sk_err before calling. */
- error = sock_error(sk);
- if (error)
- goto no_packet;
-
timeo = sock_rcvtimeo(sk, noblock);
SCTP_DEBUG_PRINTK("Timeout: timeo: %ld, MAX: %ld.\n",
if (skb)
return skb;
+ /* Caller is allowed not to check sk->sk_err before calling. */
+ error = sock_error(sk);
+ if (error)
+ goto no_packet;
+
if (sk->sk_shutdown & RCV_SHUTDOWN)
break;
sizeof(struct sk_buff) +
sizeof(struct sctp_chunk);
- sk->sk_wmem_queued -= SCTP_DATA_SNDSIZE(chunk) +
- sizeof(struct sk_buff) +
- sizeof(struct sctp_chunk);
-
atomic_sub(sizeof(struct sctp_chunk), &sk->sk_wmem_alloc);
sock_wfree(skb);
*/
sctp_release_sock(sk);
current_timeo = schedule_timeout(current_timeo);
+ BUG_ON(sk != asoc->base.sk);
sctp_lock_sock(sk);
*timeo_p = current_timeo;
/* Is there any sndbuf space available on the socket?
*
- * Note that wmem_queued is the sum of the send buffers on all of the
+ * Note that sk_wmem_alloc is the sum of the send buffers on all of the
* associations on the same socket. For a UDP-style socket with
* multiple associations, it is possible for it to be "unwriteable"
* prematurely. I assume that this is acceptable because
{
int amt = 0;
- amt = sk->sk_sndbuf - sk->sk_wmem_queued;
+ amt = sk->sk_sndbuf - atomic_read(&sk->sk_wmem_alloc);
if (amt < 0)
amt = 0;
return amt;
return err;
do_error:
- if (asoc->init_err_counter + 1 >= asoc->max_init_attempts)
+ if (asoc->init_err_counter + 1 > asoc->max_init_attempts)
err = -ETIMEDOUT;
else
err = -ECONNREFUSED;
sctp_skb_for_each(skb, &oldsk->sk_receive_queue, tmp) {
event = sctp_skb2event(skb);
if (event->asoc == assoc) {
+ sock_rfree(skb);
__skb_unlink(skb, &oldsk->sk_receive_queue);
__skb_queue_tail(&newsk->sk_receive_queue, skb);
+ skb_set_owner_r(skb, newsk);
}
}
sctp_skb_for_each(skb, &oldsp->pd_lobby, tmp) {
event = sctp_skb2event(skb);
if (event->asoc == assoc) {
+ sock_rfree(skb);
__skb_unlink(skb, &oldsp->pd_lobby);
__skb_queue_tail(queue, skb);
+ skb_set_owner_r(skb, newsk);
}
}
*/
newsp->type = type;
- /* Migrate the association to the new socket. */
+ /* Mark the new socket "in-use" by the user so that any packets
+ * that may arrive on the association after we've moved it are
+ * queued to the backlog. This prevents a potential race between
+ * backlog processing on the old socket and new-packet processing
+ * on the new socket.
+ */
+ sctp_lock_sock(newsk);
sctp_assoc_migrate(assoc, newsk);
/* If the association on the newsk is already closed before accept()
newsk->sk_shutdown |= RCV_SHUTDOWN;
newsk->sk_state = SCTP_SS_ESTABLISHED;
+ sctp_release_sock(newsk);
}
/* This proto struct describes the ULP interface for SCTP. */
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff