#include <linux/skbuff.h>
#include <linux/etherdevice.h>
#include <linux/if_arp.h>
-#include <linux/wireless.h>
#include <linux/bitmap.h>
#include <linux/crc32.h>
#include <net/net_namespace.h>
case NL80211_IFTYPE_MESH_POINT:
break;
}
- if (netif_running(sdata->dev))
- iterator(data, sdata->dev->dev_addr,
+ if (ieee80211_sdata_running(sdata))
+ iterator(data, sdata->vif.addr,
&sdata->vif);
}
case NL80211_IFTYPE_MESH_POINT:
break;
}
- if (netif_running(sdata->dev))
- iterator(data, sdata->dev->dev_addr,
+ if (ieee80211_sdata_running(sdata))
+ iterator(data, sdata->vif.addr,
&sdata->vif);
}
sizeof(*mgmt) + 6 + extra_len);
if (!skb) {
printk(KERN_DEBUG "%s: failed to allocate buffer for auth "
- "frame\n", sdata->dev->name);
+ "frame\n", sdata->name);
return;
}
skb_reserve(skb, local->hw.extra_tx_headroom);
mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
IEEE80211_STYPE_AUTH);
memcpy(mgmt->da, bssid, ETH_ALEN);
- memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
+ memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
memcpy(mgmt->bssid, bssid, ETH_ALEN);
mgmt->u.auth.auth_alg = cpu_to_le16(auth_alg);
mgmt->u.auth.auth_transaction = cpu_to_le16(transaction);
enum ieee80211_band band)
{
struct ieee80211_supported_band *sband;
- u8 *pos, *supp_rates_len, *esupp_rates_len = NULL;
- int i;
+ u8 *pos;
+ size_t offset = 0, noffset;
+ int supp_rates_len, i;
sband = local->hw.wiphy->bands[band];
pos = buffer;
+ supp_rates_len = min_t(int, sband->n_bitrates, 8);
+
*pos++ = WLAN_EID_SUPP_RATES;
- supp_rates_len = pos;
- *pos++ = 0;
-
- for (i = 0; i < sband->n_bitrates; i++) {
- struct ieee80211_rate *rate = &sband->bitrates[i];
-
- if (esupp_rates_len) {
- *esupp_rates_len += 1;
- } else if (*supp_rates_len == 8) {
- *pos++ = WLAN_EID_EXT_SUPP_RATES;
- esupp_rates_len = pos;
- *pos++ = 1;
- } else
- *supp_rates_len += 1;
+ *pos++ = supp_rates_len;
- *pos++ = rate->bitrate / 5;
+ for (i = 0; i < supp_rates_len; i++) {
+ int rate = sband->bitrates[i].bitrate;
+ *pos++ = (u8) (rate / 5);
+ }
+
+ /* insert "request information" if in custom IEs */
+ if (ie && ie_len) {
+ static const u8 before_extrates[] = {
+ WLAN_EID_SSID,
+ WLAN_EID_SUPP_RATES,
+ WLAN_EID_REQUEST,
+ };
+ noffset = ieee80211_ie_split(ie, ie_len,
+ before_extrates,
+ ARRAY_SIZE(before_extrates),
+ offset);
+ memcpy(pos, ie + offset, noffset - offset);
+ pos += noffset - offset;
+ offset = noffset;
+ }
+
+ if (sband->n_bitrates > i) {
+ *pos++ = WLAN_EID_EXT_SUPP_RATES;
+ *pos++ = sband->n_bitrates - i;
+
+ for (; i < sband->n_bitrates; i++) {
+ int rate = sband->bitrates[i].bitrate;
+ *pos++ = (u8) (rate / 5);
+ }
+ }
+
+ /* insert custom IEs that go before HT */
+ if (ie && ie_len) {
+ static const u8 before_ht[] = {
+ WLAN_EID_SSID,
+ WLAN_EID_SUPP_RATES,
+ WLAN_EID_REQUEST,
+ WLAN_EID_EXT_SUPP_RATES,
+ WLAN_EID_DS_PARAMS,
+ WLAN_EID_SUPPORTED_REGULATORY_CLASSES,
+ };
+ noffset = ieee80211_ie_split(ie, ie_len,
+ before_ht, ARRAY_SIZE(before_ht),
+ offset);
+ memcpy(pos, ie + offset, noffset - offset);
+ pos += noffset - offset;
+ offset = noffset;
}
if (sband->ht_cap.ht_supported) {
- __le16 tmp = cpu_to_le16(sband->ht_cap.cap);
+ u16 cap = sband->ht_cap.cap;
+ __le16 tmp;
+
+ if (ieee80211_disable_40mhz_24ghz &&
+ sband->band == IEEE80211_BAND_2GHZ) {
+ cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+ cap &= ~IEEE80211_HT_CAP_SGI_40;
+ }
*pos++ = WLAN_EID_HT_CAPABILITY;
*pos++ = sizeof(struct ieee80211_ht_cap);
memset(pos, 0, sizeof(struct ieee80211_ht_cap));
+ tmp = cpu_to_le16(cap);
memcpy(pos, &tmp, sizeof(u16));
pos += sizeof(u16);
- /* TODO: needs a define here for << 2 */
*pos++ = sband->ht_cap.ampdu_factor |
- (sband->ht_cap.ampdu_density << 2);
+ (sband->ht_cap.ampdu_density <<
+ IEEE80211_HT_AMPDU_PARM_DENSITY_SHIFT);
memcpy(pos, &sband->ht_cap.mcs, sizeof(sband->ht_cap.mcs));
pos += sizeof(sband->ht_cap.mcs);
pos += 2 + 4 + 1; /* ext info, BF cap, antsel */
* that calculates local->scan_ies_len.
*/
- if (ie) {
- memcpy(pos, ie, ie_len);
- pos += ie_len;
+ /* add any remaining custom IEs */
+ if (ie && ie_len) {
+ noffset = ie_len;
+ memcpy(pos, ie + offset, noffset - offset);
+ pos += noffset - offset;
}
return pos - buffer;
ie_len);
if (!skb) {
printk(KERN_DEBUG "%s: failed to allocate buffer for probe "
- "request\n", sdata->dev->name);
+ "request\n", sdata->name);
return;
}
skb_reserve(skb, local->hw.extra_tx_headroom);
memset(mgmt, 0, 24);
mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
IEEE80211_STYPE_PROBE_REQ);
- memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
+ memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
if (dst) {
memcpy(mgmt->da, dst, ETH_ALEN);
memcpy(mgmt->bssid, dst, ETH_ALEN);
{
struct ieee80211_hw *hw = &local->hw;
struct ieee80211_sub_if_data *sdata;
- struct ieee80211_if_init_conf conf;
struct sta_info *sta;
unsigned long flags;
int res;
if (res) {
WARN(local->suspended, "Harware became unavailable "
"upon resume. This is could be a software issue"
- "prior to suspend or a harware issue\n");
+ "prior to suspend or a hardware issue\n");
return res;
}
list_for_each_entry(sdata, &local->interfaces, list) {
if (sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
sdata->vif.type != NL80211_IFTYPE_MONITOR &&
- netif_running(sdata->dev)) {
- conf.vif = &sdata->vif;
- conf.type = sdata->vif.type;
- conf.mac_addr = sdata->dev->dev_addr;
- res = drv_add_interface(local, &conf);
- }
+ ieee80211_sdata_running(sdata))
+ res = drv_add_interface(local, &sdata->vif);
}
/* add STAs back */
struct ieee80211_sub_if_data,
u.ap);
- drv_sta_notify(local, &sdata->vif, STA_NOTIFY_ADD,
+ drv_sta_notify(local, sdata, STA_NOTIFY_ADD,
&sta->sta);
}
spin_unlock_irqrestore(&local->sta_lock, flags);
/* Finally also reconfigure all the BSS information */
list_for_each_entry(sdata, &local->interfaces, list) {
u32 changed = ~0;
- if (!netif_running(sdata->dev))
+ if (!ieee80211_sdata_running(sdata))
continue;
switch (sdata->vif.type) {
case NL80211_IFTYPE_STATION:
/* add back keys */
list_for_each_entry(sdata, &local->interfaces, list)
- if (netif_running(sdata->dev))
+ if (ieee80211_sdata_running(sdata))
ieee80211_enable_keys(sdata);
ieee80211_wake_queues_by_reason(hw,
return 0;
}
+static int check_mgd_smps(struct ieee80211_if_managed *ifmgd,
+ enum ieee80211_smps_mode *smps_mode)
+{
+ if (ifmgd->associated) {
+ *smps_mode = ifmgd->ap_smps;
+
+ if (*smps_mode == IEEE80211_SMPS_AUTOMATIC) {
+ if (ifmgd->powersave)
+ *smps_mode = IEEE80211_SMPS_DYNAMIC;
+ else
+ *smps_mode = IEEE80211_SMPS_OFF;
+ }
+
+ return 1;
+ }
+
+ return 0;
+}
+
+/* must hold iflist_mtx */
+void ieee80211_recalc_smps(struct ieee80211_local *local,
+ struct ieee80211_sub_if_data *forsdata)
+{
+ struct ieee80211_sub_if_data *sdata;
+ enum ieee80211_smps_mode smps_mode = IEEE80211_SMPS_OFF;
+ int count = 0;
+
+ if (forsdata)
+ WARN_ON(!mutex_is_locked(&forsdata->u.mgd.mtx));
+
+ WARN_ON(!mutex_is_locked(&local->iflist_mtx));
+
+ /*
+ * This function could be improved to handle multiple
+ * interfaces better, but right now it makes any
+ * non-station interfaces force SM PS to be turned
+ * off. If there are multiple station interfaces it
+ * could also use the best possible mode, e.g. if
+ * one is in static and the other in dynamic then
+ * dynamic is ok.
+ */
+
+ list_for_each_entry(sdata, &local->interfaces, list) {
+ if (!netif_running(sdata->dev))
+ continue;
+ if (sdata->vif.type != NL80211_IFTYPE_STATION)
+ goto set;
+ if (sdata != forsdata) {
+ /*
+ * This nested is ok -- we are holding the iflist_mtx
+ * so can't get here twice or so. But it's required
+ * since normally we acquire it first and then the
+ * iflist_mtx.
+ */
+ mutex_lock_nested(&sdata->u.mgd.mtx, SINGLE_DEPTH_NESTING);
+ count += check_mgd_smps(&sdata->u.mgd, &smps_mode);
+ mutex_unlock(&sdata->u.mgd.mtx);
+ } else
+ count += check_mgd_smps(&sdata->u.mgd, &smps_mode);
+
+ if (count > 1) {
+ smps_mode = IEEE80211_SMPS_OFF;
+ break;
+ }
+ }
+
+ if (smps_mode == local->smps_mode)
+ return;
+
+ set:
+ local->smps_mode = smps_mode;
+ /* changed flag is auto-detected for this */
+ ieee80211_hw_config(local, 0);
+}
+
+static bool ieee80211_id_in_list(const u8 *ids, int n_ids, u8 id)
+{
+ int i;
+
+ for (i = 0; i < n_ids; i++)
+ if (ids[i] == id)
+ return true;
+ return false;
+}
+
+/**
+ * ieee80211_ie_split - split an IE buffer according to ordering
+ *
+ * @ies: the IE buffer
+ * @ielen: the length of the IE buffer
+ * @ids: an array with element IDs that are allowed before
+ * the split
+ * @n_ids: the size of the element ID array
+ * @offset: offset where to start splitting in the buffer
+ *
+ * This function splits an IE buffer by updating the @offset
+ * variable to point to the location where the buffer should be
+ * split.
+ *
+ * It assumes that the given IE buffer is well-formed, this
+ * has to be guaranteed by the caller!
+ *
+ * It also assumes that the IEs in the buffer are ordered
+ * correctly, if not the result of using this function will not
+ * be ordered correctly either, i.e. it does no reordering.
+ *
+ * The function returns the offset where the next part of the
+ * buffer starts, which may be @ielen if the entire (remainder)
+ * of the buffer should be used.
+ */
+size_t ieee80211_ie_split(const u8 *ies, size_t ielen,
+ const u8 *ids, int n_ids, size_t offset)
+{
+ size_t pos = offset;
+
+ while (pos < ielen && ieee80211_id_in_list(ids, n_ids, ies[pos]))
+ pos += 2 + ies[pos + 1];
+
+ return pos;
+}
+
+size_t ieee80211_ie_split_vendor(const u8 *ies, size_t ielen, size_t offset)
+{
+ size_t pos = offset;
+
+ while (pos < ielen && ies[pos] != WLAN_EID_VENDOR_SPECIFIC)
+ pos += 2 + ies[pos + 1];
+
+ return pos;
+}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff