* Copyright 2002-2005, Instant802 Networks, Inc.
* Copyright 2005-2006, Devicescape Software, Inc.
* Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
- * Copyright 2008-2009 Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2008-2010 Johannes Berg <johannes@sipsolutions.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
/*
- * XXX: This is temporary!
- *
- * The problem here is that when we get here, the driver will
- * quite likely have pretty much overwritten info->control by
- * using info->driver_data or info->rate_driver_data. Thus,
- * when passing out the frame to the driver again, we would be
- * passing completely bogus data since the driver would then
- * expect a properly filled info->control. In mac80211 itself
- * the same problem occurs, since we need info->control.vif
- * internally.
- *
- * To fix this, we should send the frame through TX processing
- * again. However, it's not that simple, since the frame will
- * have been software-encrypted (if applicable) already, and
- * encrypting it again doesn't do much good. So to properly do
- * that, we not only have to skip the actual 'raw' encryption
- * (key selection etc. still has to be done!) but also the
- * sequence number assignment since that impacts the crypto
- * encapsulation, of course.
- *
- * Hence, for now, fix the bug by just dropping the frame.
+ * This skb 'survived' a round-trip through the driver, and
+ * hopefully the driver didn't mangle it too badly. However,
+ * we can definitely not rely on the the control information
+ * being correct. Clear it so we don't get junk there, and
+ * indicate that it needs new processing, but must not be
+ * modified/encrypted again.
*/
- goto drop;
+ memset(&info->control, 0, sizeof(info->control));
+
+ info->control.jiffies = jiffies;
+ info->control.vif = &sta->sdata->vif;
+ info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING |
+ IEEE80211_TX_INTFL_RETRANSMISSION;
sta->tx_filtered_count++;
return;
}
- drop:
#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
if (net_ratelimit())
printk(KERN_DEBUG "%s: dropped TX filtered frame, "
dev_kfree_skb(skb);
}
+static void ieee80211_frame_acked(struct sta_info *sta, struct sk_buff *skb)
+{
+ struct ieee80211_mgmt *mgmt = (void *) skb->data;
+ struct ieee80211_local *local = sta->local;
+ struct ieee80211_sub_if_data *sdata = sta->sdata;
+
+ if (ieee80211_is_action(mgmt->frame_control) &&
+ sdata->vif.type == NL80211_IFTYPE_STATION &&
+ mgmt->u.action.category == WLAN_CATEGORY_HT &&
+ mgmt->u.action.u.ht_smps.action == WLAN_HT_ACTION_SMPS) {
+ /*
+ * This update looks racy, but isn't -- if we come
+ * here we've definitely got a station that we're
+ * talking to, and on a managed interface that can
+ * only be the AP. And the only other place updating
+ * this variable is before we're associated.
+ */
+ switch (mgmt->u.action.u.ht_smps.smps_control) {
+ case WLAN_HT_SMPS_CONTROL_DYNAMIC:
+ sta->sdata->u.mgd.ap_smps = IEEE80211_SMPS_DYNAMIC;
+ break;
+ case WLAN_HT_SMPS_CONTROL_STATIC:
+ sta->sdata->u.mgd.ap_smps = IEEE80211_SMPS_STATIC;
+ break;
+ case WLAN_HT_SMPS_CONTROL_DISABLED:
+ default: /* shouldn't happen since we don't send that */
+ sta->sdata->u.mgd.ap_smps = IEEE80211_SMPS_OFF;
+ break;
+ }
+
+ ieee80211_queue_work(&local->hw, &local->recalc_smps);
+ }
+}
+
void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb)
{
struct sk_buff *skb2;
struct ieee80211_tx_status_rtap_hdr *rthdr;
struct ieee80211_sub_if_data *sdata;
struct net_device *prev_dev = NULL;
- struct sta_info *sta;
+ struct sta_info *sta, *tmp;
int retry_count = -1, i;
bool injected;
rcu_read_lock();
sband = local->hw.wiphy->bands[info->band];
+ fc = hdr->frame_control;
- sta = sta_info_get(local, hdr->addr1);
+ for_each_sta_info(local, hdr->addr1, sta, tmp) {
+ /* skip wrong virtual interface */
+ if (memcmp(hdr->addr2, sta->sdata->vif.addr, ETH_ALEN))
+ continue;
- if (sta) {
if (!(info->flags & IEEE80211_TX_STAT_ACK) &&
test_sta_flags(sta, WLAN_STA_PS_STA)) {
/*
return;
}
- fc = hdr->frame_control;
-
if ((info->flags & IEEE80211_TX_STAT_AMPDU_NO_BACK) &&
(ieee80211_is_data_qos(fc))) {
u16 tid, ssn;
rate_control_tx_status(local, sband, sta, skb);
if (ieee80211_vif_is_mesh(&sta->sdata->vif))
ieee80211s_update_metric(local, sta, skb);
+
+ if (!(info->flags & IEEE80211_TX_CTL_INJECTED) &&
+ (info->flags & IEEE80211_TX_STAT_ACK))
+ ieee80211_frame_acked(sta, skb);
}
rcu_read_unlock();
local->dot11FailedCount++;
}
+ if (ieee80211_is_nullfunc(fc) && ieee80211_has_pm(fc) &&
+ (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) &&
+ !(info->flags & IEEE80211_TX_CTL_INJECTED) &&
+ local->ps_sdata && !(local->scanning)) {
+ if (info->flags & IEEE80211_TX_STAT_ACK) {
+ local->ps_sdata->u.mgd.flags |=
+ IEEE80211_STA_NULLFUNC_ACKED;
+ ieee80211_queue_work(&local->hw,
+ &local->dynamic_ps_enable_work);
+ } else
+ mod_timer(&local->dynamic_ps_timer, jiffies +
+ msecs_to_jiffies(10));
+ }
+
+ if (info->flags & IEEE80211_TX_INTFL_NL80211_FRAME_TX)
+ cfg80211_action_tx_status(
+ skb->dev, (unsigned long) skb, skb->data, skb->len,
+ !!(info->flags & IEEE80211_TX_STAT_ACK), GFP_ATOMIC);
+
/* this was a transmitted frame, but now we want to reuse it */
skb_orphan(skb);
rcu_read_lock();
list_for_each_entry_rcu(sdata, &local->interfaces, list) {
if (sdata->vif.type == NL80211_IFTYPE_MONITOR) {
- if (!netif_running(sdata->dev))
+ if (!ieee80211_sdata_running(sdata))
continue;
if ((sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) &&
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff