#include <net/iw_handler.h>
#include "ieee80211_i.h"
+#include "driver-ops.h"
#include "mesh.h"
#define IEEE80211_PROBE_DELAY (HZ / 33)
was_hw_scan = local->hw_scanning;
local->hw_scanning = false;
local->sw_scanning = false;
+ local->scan_channel = NULL;
/* we only have to protect scan_req and hw/sw scan */
mutex_unlock(&local->scan_mtx);
- if (was_hw_scan) {
- /*
- * Somebody might have requested channel change during scan
- * that we won't have acted upon, try now. ieee80211_hw_config
- * will set the flag based on actual changes.
- */
- ieee80211_hw_config(local, 0);
- goto done;
- }
-
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
+ if (was_hw_scan)
+ goto done;
netif_tx_lock_bh(local->mdev);
netif_addr_lock(local->mdev);
local->filter_flags &= ~FIF_BCN_PRBRESP_PROMISC;
- local->ops->configure_filter(local_to_hw(local),
- FIF_BCN_PRBRESP_PROMISC,
- &local->filter_flags,
- local->mdev->mc_count,
- local->mdev->mc_list);
+ drv_configure_filter(local, FIF_BCN_PRBRESP_PROMISC,
+ &local->filter_flags,
+ local->mdev->mc_count,
+ local->mdev->mc_list);
netif_addr_unlock(local->mdev);
netif_tx_unlock_bh(local->mdev);
- if (local->ops->sw_scan_complete)
- local->ops->sw_scan_complete(local_to_hw(local));
+ drv_sw_scan_complete(local);
mutex_lock(&local->iflist_mtx);
list_for_each_entry(sdata, &local->interfaces, list) {
if (sdata->vif.type == NL80211_IFTYPE_AP ||
sdata->vif.type == NL80211_IFTYPE_ADHOC ||
sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
- ieee80211_if_config(sdata,
- IEEE80211_IFCC_BEACON_ENABLED);
+ ieee80211_bss_info_change_notify(
+ sdata, BSS_CHANGED_BEACON_ENABLED);
}
mutex_unlock(&local->iflist_mtx);
done:
+ ieee80211_recalc_idle(local);
ieee80211_mlme_notify_scan_completed(local);
ieee80211_ibss_notify_scan_completed(local);
ieee80211_mesh_notify_scan_completed(local);
* nullfunc frames and probe requests will be dropped in
* ieee80211_tx_h_check_assoc().
*/
- if (local->ops->sw_scan_start)
- local->ops->sw_scan_start(local_to_hw(local));
+ drv_sw_scan_start(local);
mutex_lock(&local->iflist_mtx);
list_for_each_entry(sdata, &local->interfaces, list) {
if (sdata->vif.type == NL80211_IFTYPE_AP ||
sdata->vif.type == NL80211_IFTYPE_ADHOC ||
sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
- ieee80211_if_config(sdata,
- IEEE80211_IFCC_BEACON_ENABLED);
+ ieee80211_bss_info_change_notify(
+ sdata, BSS_CHANGED_BEACON_ENABLED);
if (sdata->vif.type == NL80211_IFTYPE_STATION) {
if (sdata->u.mgd.flags & IEEE80211_STA_ASSOCIATED) {
netif_addr_lock_bh(local->mdev);
local->filter_flags |= FIF_BCN_PRBRESP_PROMISC;
- local->ops->configure_filter(local_to_hw(local),
- FIF_BCN_PRBRESP_PROMISC,
- &local->filter_flags,
- local->mdev->mc_count,
- local->mdev->mc_list);
+ drv_configure_filter(local, FIF_BCN_PRBRESP_PROMISC,
+ &local->filter_flags,
+ local->mdev->mc_count,
+ local->mdev->mc_list);
netif_addr_unlock_bh(local->mdev);
/* TODO: start scan as soon as all nullfunc frames are ACKed */
* dependency, so that the scan completed calls
* have more locking freedom.
*/
+
+ ieee80211_recalc_idle(local);
mutex_unlock(&local->scan_mtx);
if (local->ops->hw_scan)
- rc = local->ops->hw_scan(local_to_hw(local),
- local->scan_req);
+ rc = drv_hw_scan(local, local->scan_req);
else
rc = ieee80211_start_sw_scan(local);
} else
local->sw_scanning = false;
+ ieee80211_recalc_idle(local);
+
local->scan_req = NULL;
local->scan_sdata = NULL;
}
if (skip)
break;
- next_delay = IEEE80211_PROBE_DELAY +
- usecs_to_jiffies(local->hw.channel_change_time);
+ /*
+ * Probe delay is used to update the NAV, cf. 11.1.3.2.2
+ * (which unfortunately doesn't say _why_ step a) is done,
+ * but it waits for the probe delay or until a frame is
+ * received - and the received frame would update the NAV).
+ * For now, we do not support waiting until a frame is
+ * received.
+ *
+ * In any case, it is not necessary for a passive scan.
+ */
+ if (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN ||
+ !local->scan_req->n_ssids) {
+ next_delay = IEEE80211_PASSIVE_CHANNEL_TIME;
+ break;
+ }
+
+ next_delay = IEEE80211_PROBE_DELAY;
local->scan_state = SCAN_SEND_PROBE;
break;
case SCAN_SEND_PROBE:
- next_delay = IEEE80211_PASSIVE_CHANNEL_TIME;
- local->scan_state = SCAN_SET_CHANNEL;
-
- if (local->scan_channel->flags & IEEE80211_CHAN_PASSIVE_SCAN ||
- !local->scan_req->n_ssids)
- break;
for (i = 0; i < local->scan_req->n_ssids; i++)
ieee80211_send_probe_req(
sdata, NULL,
local->scan_req->ssids[i].ssid,
local->scan_req->ssids[i].ssid_len,
local->scan_req->ie, local->scan_req->ie_len);
+
+ /*
+ * After sending probe requests, wait for probe responses
+ * on the channel.
+ */
next_delay = IEEE80211_CHANNEL_TIME;
+ local->scan_state = SCAN_SET_CHANNEL;
break;
}