* only useful for monitoring.
*/
static struct sk_buff *remove_monitor_info(struct ieee80211_local *local,
- struct sk_buff *skb,
- int rtap_len)
+ struct sk_buff *skb)
{
- skb_pull(skb, rtap_len);
-
if (local->hw.flags & IEEE80211_HW_RX_INCLUDES_FCS) {
if (likely(skb->len > FCS_LEN))
skb_trim(skb, skb->len - FCS_LEN);
}
static inline int should_drop_frame(struct sk_buff *skb,
- int present_fcs_len,
- int radiotap_len)
+ int present_fcs_len)
{
struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
if (status->flag & (RX_FLAG_FAILED_FCS_CRC | RX_FLAG_FAILED_PLCP_CRC))
return 1;
- if (unlikely(skb->len < 16 + present_fcs_len + radiotap_len))
+ if (unlikely(skb->len < 16 + present_fcs_len))
return 1;
if (ieee80211_is_ctl(hdr->frame_control) &&
!ieee80211_is_pspoll(hdr->frame_control) &&
if (len & 1) /* padding for RX_FLAGS if necessary */
len++;
- /* make sure radiotap starts at a naturally aligned address */
- if (len % 8)
- len = roundup(len, 8);
-
return len;
}
struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
struct ieee80211_radiotap_header *rthdr;
unsigned char *pos;
+ u16 rx_flags = 0;
rthdr = (struct ieee80211_radiotap_header *)skb_push(skb, rtap_len);
memset(rthdr, 0, rtap_len);
/* IEEE80211_RADIOTAP_TSFT */
if (status->flag & RX_FLAG_TSFT) {
- *(__le64 *)pos = cpu_to_le64(status->mactime);
+ put_unaligned_le64(status->mactime, pos);
rthdr->it_present |=
cpu_to_le32(1 << IEEE80211_RADIOTAP_TSFT);
pos += 8;
pos++;
/* IEEE80211_RADIOTAP_CHANNEL */
- *(__le16 *)pos = cpu_to_le16(status->freq);
+ put_unaligned_le16(status->freq, pos);
pos += 2;
if (status->band == IEEE80211_BAND_5GHZ)
- *(__le16 *)pos = cpu_to_le16(IEEE80211_CHAN_OFDM |
- IEEE80211_CHAN_5GHZ);
+ put_unaligned_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_5GHZ,
+ pos);
else if (rate->flags & IEEE80211_RATE_ERP_G)
- *(__le16 *)pos = cpu_to_le16(IEEE80211_CHAN_OFDM |
- IEEE80211_CHAN_2GHZ);
+ put_unaligned_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_2GHZ,
+ pos);
else
- *(__le16 *)pos = cpu_to_le16(IEEE80211_CHAN_CCK |
- IEEE80211_CHAN_2GHZ);
+ put_unaligned_le16(IEEE80211_CHAN_CCK | IEEE80211_CHAN_2GHZ,
+ pos);
pos += 2;
/* IEEE80211_RADIOTAP_DBM_ANTSIGNAL */
/* IEEE80211_RADIOTAP_RX_FLAGS */
/* ensure 2 byte alignment for the 2 byte field as required */
- if ((pos - (unsigned char *)rthdr) & 1)
+ if ((pos - (u8 *)rthdr) & 1)
pos++;
if (status->flag & RX_FLAG_FAILED_PLCP_CRC)
- *(__le16 *)pos |= cpu_to_le16(IEEE80211_RADIOTAP_F_RX_BADPLCP);
+ rx_flags |= IEEE80211_RADIOTAP_F_RX_BADPLCP;
+ put_unaligned_le16(rx_flags, pos);
pos += 2;
}
struct sk_buff *skb, *skb2;
struct net_device *prev_dev = NULL;
int present_fcs_len = 0;
- int rtap_len = 0;
/*
* First, we may need to make a copy of the skb because
* We don't need to, of course, if we aren't going to return
* the SKB because it has a bad FCS/PLCP checksum.
*/
- if (status->flag & RX_FLAG_RADIOTAP)
- rtap_len = ieee80211_get_radiotap_len(origskb->data);
- else
- /* room for the radiotap header based on driver features */
- needed_headroom = ieee80211_rx_radiotap_len(local, status);
+
+ /* room for the radiotap header based on driver features */
+ needed_headroom = ieee80211_rx_radiotap_len(local, status);
if (local->hw.flags & IEEE80211_HW_RX_INCLUDES_FCS)
present_fcs_len = FCS_LEN;
if (!local->monitors) {
- if (should_drop_frame(origskb, present_fcs_len, rtap_len)) {
+ if (should_drop_frame(origskb, present_fcs_len)) {
dev_kfree_skb(origskb);
return NULL;
}
- return remove_monitor_info(local, origskb, rtap_len);
+ return remove_monitor_info(local, origskb);
}
- if (should_drop_frame(origskb, present_fcs_len, rtap_len)) {
+ if (should_drop_frame(origskb, present_fcs_len)) {
/* only need to expand headroom if necessary */
skb = origskb;
origskb = NULL;
*/
skb = skb_copy_expand(origskb, needed_headroom, 0, GFP_ATOMIC);
- origskb = remove_monitor_info(local, origskb, rtap_len);
+ origskb = remove_monitor_info(local, origskb);
if (!skb)
return origskb;
}
- /* if necessary, prepend radiotap information */
- if (!(status->flag & RX_FLAG_RADIOTAP))
- ieee80211_add_rx_radiotap_header(local, skb, rate,
- needed_headroom);
+ /* prepend radiotap information */
+ ieee80211_add_rx_radiotap_header(local, skb, rate, needed_headroom);
skb_reset_mac_header(skb);
skb->ip_summed = CHECKSUM_UNNECESSARY;
{
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data;
unsigned int hdrlen = ieee80211_hdrlen(hdr->frame_control);
+ char *dev_addr = rx->dev->dev_addr;
if (ieee80211_is_data(hdr->frame_control)) {
- if (!ieee80211_has_a4(hdr->frame_control))
- return RX_DROP_MONITOR;
- if (memcmp(hdr->addr4, rx->dev->dev_addr, ETH_ALEN) == 0)
- return RX_DROP_MONITOR;
+ if (is_multicast_ether_addr(hdr->addr1)) {
+ if (ieee80211_has_tods(hdr->frame_control) ||
+ !ieee80211_has_fromds(hdr->frame_control))
+ return RX_DROP_MONITOR;
+ if (memcmp(hdr->addr3, dev_addr, ETH_ALEN) == 0)
+ return RX_DROP_MONITOR;
+ } else {
+ if (!ieee80211_has_a4(hdr->frame_control))
+ return RX_DROP_MONITOR;
+ if (memcmp(hdr->addr4, dev_addr, ETH_ALEN) == 0)
+ return RX_DROP_MONITOR;
+ }
}
/* If there is not an established peer link and this is not a peer link
if (ieee80211_is_data(hdr->frame_control) &&
is_multicast_ether_addr(hdr->addr1) &&
- mesh_rmc_check(hdr->addr4, msh_h_get(hdr, hdrlen), rx->sdata))
+ mesh_rmc_check(hdr->addr3, msh_h_get(hdr, hdrlen), rx->sdata))
return RX_DROP_MONITOR;
#undef msh_h_get
struct ieee80211_local *local = sdata->local;
atomic_inc(&sdata->bss->num_sta_ps);
- set_and_clear_sta_flags(sta, WLAN_STA_PS, WLAN_STA_PSPOLL);
+ set_sta_flags(sta, WLAN_STA_PS);
drv_sta_notify(local, &sdata->vif, STA_NOTIFY_SLEEP, &sta->sta);
#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
printk(KERN_DEBUG "%s: STA %pM aid %d enters power save mode\n",
atomic_dec(&sdata->bss->num_sta_ps);
- clear_sta_flags(sta, WLAN_STA_PS | WLAN_STA_PSPOLL);
+ clear_sta_flags(sta, WLAN_STA_PS);
drv_sta_notify(local, &sdata->vif, STA_NOTIFY_AWAKE, &sta->sta);
if (!skb_queue_empty(&sta->ps_tx_buf))
skb_queue_empty(&rx->sta->ps_tx_buf);
if (skb) {
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_hdr *hdr =
(struct ieee80211_hdr *) skb->data;
/*
- * Tell TX path to send one frame even though the STA may
+ * Tell TX path to send this frame even though the STA may
* still remain is PS mode after this frame exchange.
*/
- set_sta_flags(rx->sta, WLAN_STA_PSPOLL);
+ info->flags |= IEEE80211_TX_CTL_PSPOLL_RESPONSE;
#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
printk(KERN_DEBUG "STA %pM aid %d: PS Poll (entries after %d)\n",
else
hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_MOREDATA);
- dev_queue_xmit(skb);
+ ieee80211_add_pending_skb(rx->local, skb);
if (no_pending_pkts)
sta_info_clear_tim_bit(rx->sta);
/* illegal frame */
return RX_DROP_MONITOR;
- if (mesh_hdr->flags & MESH_FLAGS_AE_A5_A6){
+ if (mesh_hdr->flags & MESH_FLAGS_AE) {
struct mesh_path *mppath;
+ char *proxied_addr;
+ char *mpp_addr;
+
+ if (is_multicast_ether_addr(hdr->addr1)) {
+ mpp_addr = hdr->addr3;
+ proxied_addr = mesh_hdr->eaddr1;
+ } else {
+ mpp_addr = hdr->addr4;
+ proxied_addr = mesh_hdr->eaddr2;
+ }
rcu_read_lock();
- mppath = mpp_path_lookup(mesh_hdr->eaddr2, sdata);
+ mppath = mpp_path_lookup(proxied_addr, sdata);
if (!mppath) {
- mpp_path_add(mesh_hdr->eaddr2, hdr->addr4, sdata);
+ mpp_path_add(proxied_addr, mpp_addr, sdata);
} else {
spin_lock_bh(&mppath->state_lock);
mppath->exp_time = jiffies;
- if (compare_ether_addr(mppath->mpp, hdr->addr4) != 0)
- memcpy(mppath->mpp, hdr->addr4, ETH_ALEN);
+ if (compare_ether_addr(mppath->mpp, mpp_addr) != 0)
+ memcpy(mppath->mpp, mpp_addr, ETH_ALEN);
spin_unlock_bh(&mppath->state_lock);
}
rcu_read_unlock();
}
- if (compare_ether_addr(rx->dev->dev_addr, hdr->addr3) == 0)
+ /* Frame has reached destination. Don't forward */
+ if (!is_multicast_ether_addr(hdr->addr1) &&
+ compare_ether_addr(rx->dev->dev_addr, hdr->addr3) == 0)
return RX_CONTINUE;
mesh_hdr->ttl--;
rx->dev->name);
fwd_hdr = (struct ieee80211_hdr *) fwd_skb->data;
- /*
- * Save TA to addr1 to send TA a path error if a
- * suitable next hop is not found
- */
- memcpy(fwd_hdr->addr1, fwd_hdr->addr2, ETH_ALEN);
memcpy(fwd_hdr->addr2, rx->dev->dev_addr, ETH_ALEN);
info = IEEE80211_SKB_CB(fwd_skb);
memset(info, 0, sizeof(*info));
info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING;
info->control.vif = &rx->sdata->vif;
ieee80211_select_queue(local, fwd_skb);
- if (is_multicast_ether_addr(fwd_hdr->addr3))
- memcpy(fwd_hdr->addr1, fwd_hdr->addr3,
- ETH_ALEN);
+ if (is_multicast_ether_addr(fwd_hdr->addr1))
+ IEEE80211_IFSTA_MESH_CTR_INC(&sdata->u.mesh,
+ fwded_mcast);
else {
- int err = mesh_nexthop_lookup(fwd_skb, sdata);
+ int err;
+ /*
+ * Save TA to addr1 to send TA a path error if a
+ * suitable next hop is not found
+ */
+ memcpy(fwd_hdr->addr1, fwd_hdr->addr2,
+ ETH_ALEN);
+ err = mesh_nexthop_lookup(fwd_skb, sdata);
/* Failed to immediately resolve next hop:
* fwded frame was dropped or will be added
* later to the pending skb queue. */
if (err)
return RX_DROP_MONITOR;
+
+ IEEE80211_IFSTA_MESH_CTR_INC(&sdata->u.mesh,
+ fwded_unicast);
}
IEEE80211_IFSTA_MESH_CTR_INC(&sdata->u.mesh,
fwded_frames);
}
}
- if (is_multicast_ether_addr(hdr->addr3) ||
+ if (is_multicast_ether_addr(hdr->addr1) ||
rx->dev->flags & IFF_PROMISC)
return RX_CONTINUE;
else
skb = rx.skb;
- list_for_each_entry_rcu(sdata, &local->interfaces, list) {
+ if (rx.sdata && ieee80211_is_data(hdr->frame_control)) {
+ rx.flags |= IEEE80211_RX_RA_MATCH;
+ prepares = prepare_for_handlers(rx.sdata, &rx, hdr);
+ if (prepares)
+ prev = rx.sdata;
+ } else list_for_each_entry_rcu(sdata, &local->interfaces, list) {
if (!netif_running(sdata->dev))
continue;
- if (sdata->vif.type == NL80211_IFTYPE_MONITOR)
+ if (sdata->vif.type == NL80211_IFTYPE_MONITOR ||
+ sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
continue;
rx.flags |= IEEE80211_RX_RA_MATCH;
* This is the receive path handler. It is called by a low level driver when an
* 802.11 MPDU is received from the hardware.
*/
-void __ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb)
+void ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb)
{
struct ieee80211_local *local = hw_to_local(hw);
struct ieee80211_rate *rate = NULL;
struct ieee80211_supported_band *sband;
struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
- if (status->band < 0 ||
- status->band >= IEEE80211_NUM_BANDS) {
- WARN_ON(1);
- return;
- }
+ WARN_ON_ONCE(softirq_count() == 0);
+
+ if (WARN_ON(status->band < 0 ||
+ status->band >= IEEE80211_NUM_BANDS))
+ goto drop;
sband = local->hw.wiphy->bands[status->band];
- if (!sband) {
- WARN_ON(1);
- return;
- }
+ if (WARN_ON(!sband))
+ goto drop;
+
+ /*
+ * If we're suspending, it is possible although not too likely
+ * that we'd be receiving frames after having already partially
+ * quiesced the stack. We can't process such frames then since
+ * that might, for example, cause stations to be added or other
+ * driver callbacks be invoked.
+ */
+ if (unlikely(local->quiescing || local->suspended))
+ goto drop;
+
+ /*
+ * The same happens when we're not even started,
+ * but that's worth a warning.
+ */
+ if (WARN_ON(!local->started))
+ goto drop;
if (status->flag & RX_FLAG_HT) {
/* rate_idx is MCS index */
if (WARN_ON(status->rate_idx < 0 ||
status->rate_idx >= 76))
- return;
+ goto drop;
/* HT rates are not in the table - use the highest legacy rate
* for now since other parts of mac80211 may not yet be fully
* MCS aware. */
} else {
if (WARN_ON(status->rate_idx < 0 ||
status->rate_idx >= sband->n_bitrates))
- return;
+ goto drop;
rate = &sband->bitrates[status->rate_idx];
}
__ieee80211_rx_handle_packet(hw, skb, rate);
rcu_read_unlock();
+
+ return;
+ drop:
+ kfree_skb(skb);
}
-EXPORT_SYMBOL(__ieee80211_rx);
+EXPORT_SYMBOL(ieee80211_rx);
/* This is a version of the rx handler that can be called from hard irq
* context. Post the skb on the queue and schedule the tasklet */
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff