if (ieee80211_is_action(hdr->frame_control)) {
mgmt = (struct ieee80211_mgmt *)hdr;
- if (mgmt->u.action.category != PLINK_CATEGORY)
+ if (mgmt->u.action.category != MESH_PLINK_CATEGORY)
return RX_DROP_MONITOR;
return RX_CONTINUE;
}
struct ieee80211_local *local = sdata->local;
atomic_inc(&sdata->bss->num_sta_ps);
- set_sta_flags(sta, WLAN_STA_PS);
+ set_sta_flags(sta, WLAN_STA_PS_STA);
drv_sta_notify(local, &sdata->vif, STA_NOTIFY_SLEEP, &sta->sta);
#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
printk(KERN_DEBUG "%s: STA %pM aid %d enters power save mode\n",
#endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
}
-static int ap_sta_ps_end(struct sta_info *sta)
+static void ap_sta_ps_end(struct sta_info *sta)
{
struct ieee80211_sub_if_data *sdata = sta->sdata;
- struct ieee80211_local *local = sdata->local;
- int sent, buffered;
atomic_dec(&sdata->bss->num_sta_ps);
- clear_sta_flags(sta, WLAN_STA_PS);
- drv_sta_notify(local, &sdata->vif, STA_NOTIFY_AWAKE, &sta->sta);
-
- if (!skb_queue_empty(&sta->ps_tx_buf))
- sta_info_clear_tim_bit(sta);
+ clear_sta_flags(sta, WLAN_STA_PS_STA);
#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
printk(KERN_DEBUG "%s: STA %pM aid %d exits power save mode\n",
sdata->dev->name, sta->sta.addr, sta->sta.aid);
#endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
- /* Send all buffered frames to the station */
- sent = ieee80211_add_pending_skbs(local, &sta->tx_filtered);
- buffered = ieee80211_add_pending_skbs(local, &sta->ps_tx_buf);
- sent += buffered;
- local->total_ps_buffered -= buffered;
-
+ if (test_sta_flags(sta, WLAN_STA_PS_DRIVER)) {
#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
- printk(KERN_DEBUG "%s: STA %pM aid %d sending %d filtered/%d PS frames "
- "since STA not sleeping anymore\n", sdata->dev->name,
- sta->sta.addr, sta->sta.aid, sent - buffered, buffered);
+ printk(KERN_DEBUG "%s: STA %pM aid %d driver-ps-blocked\n",
+ sdata->dev->name, sta->sta.addr, sta->sta.aid);
#endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
+ return;
+ }
- return sent;
+ ieee80211_sta_ps_deliver_wakeup(sta);
}
static ieee80211_rx_result debug_noinline
if (!ieee80211_has_morefrags(hdr->frame_control) &&
(rx->sdata->vif.type == NL80211_IFTYPE_AP ||
rx->sdata->vif.type == NL80211_IFTYPE_AP_VLAN)) {
- if (test_sta_flags(sta, WLAN_STA_PS)) {
+ if (test_sta_flags(sta, WLAN_STA_PS_STA)) {
/*
* Ignore doze->wake transitions that are
* indicated by non-data frames, the standard
*/
if (ieee80211_is_data(hdr->frame_control) &&
!ieee80211_has_pm(hdr->frame_control))
- rx->sent_ps_buffered += ap_sta_ps_end(sta);
+ ap_sta_ps_end(sta);
} else {
if (ieee80211_has_pm(hdr->frame_control))
ap_sta_ps_start(sta);
static ieee80211_rx_result debug_noinline
ieee80211_rx_h_ps_poll(struct ieee80211_rx_data *rx)
{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(rx->dev);
- struct sk_buff *skb;
- int no_pending_pkts;
+ struct ieee80211_sub_if_data *sdata = rx->sdata;
__le16 fc = ((struct ieee80211_hdr *)rx->skb->data)->frame_control;
if (likely(!rx->sta || !ieee80211_is_pspoll(fc) ||
(sdata->vif.type != NL80211_IFTYPE_AP_VLAN))
return RX_DROP_UNUSABLE;
- skb = skb_dequeue(&rx->sta->tx_filtered);
- if (!skb) {
- skb = skb_dequeue(&rx->sta->ps_tx_buf);
- if (skb)
- rx->local->total_ps_buffered--;
- }
- no_pending_pkts = skb_queue_empty(&rx->sta->tx_filtered) &&
- skb_queue_empty(&rx->sta->ps_tx_buf);
-
- if (skb) {
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
- struct ieee80211_hdr *hdr =
- (struct ieee80211_hdr *) skb->data;
-
- /*
- * Tell TX path to send this frame even though the STA may
- * still remain is PS mode after this frame exchange.
- */
- info->flags |= IEEE80211_TX_CTL_PSPOLL_RESPONSE;
-
-#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
- printk(KERN_DEBUG "STA %pM aid %d: PS Poll (entries after %d)\n",
- rx->sta->sta.addr, rx->sta->sta.aid,
- skb_queue_len(&rx->sta->ps_tx_buf));
-#endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
-
- /* Use MoreData flag to indicate whether there are more
- * buffered frames for this STA */
- if (no_pending_pkts)
- hdr->frame_control &= cpu_to_le16(~IEEE80211_FCTL_MOREDATA);
- else
- hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_MOREDATA);
-
- ieee80211_add_pending_skb(rx->local, skb);
-
- if (no_pending_pkts)
- sta_info_clear_tim_bit(rx->sta);
-#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
- } else if (!rx->sent_ps_buffered) {
- /*
- * FIXME: This can be the result of a race condition between
- * us expiring a frame and the station polling for it.
- * Should we send it a null-func frame indicating we
- * have nothing buffered for it?
- */
- printk(KERN_DEBUG "%s: STA %pM sent PS Poll even "
- "though there are no buffered frames for it\n",
- rx->dev->name, rx->sta->sta.addr);
-#endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
- }
+ if (!test_sta_flags(rx->sta, WLAN_STA_PS_DRIVER))
+ ieee80211_sta_ps_deliver_poll_response(rx->sta);
+ else
+ set_sta_flags(rx->sta, WLAN_STA_PSPOLL);
/* Free PS Poll skb here instead of returning RX_DROP that would
* count as an dropped frame. */
{
struct net_device *dev = rx->dev;
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data;
+
+ if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN && !sdata->use_4addr &&
+ ieee80211_has_a4(hdr->frame_control))
+ return -1;
+ if (sdata->use_4addr && is_multicast_ether_addr(hdr->addr1))
+ return -1;
return ieee80211_data_to_8023(rx->skb, dev->dev_addr, sdata->vif.type);
}
{
struct net_device *dev = rx->dev;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data;
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
__le16 fc = hdr->frame_control;
int err;
if (unlikely(!ieee80211_is_data_present(hdr->frame_control)))
return RX_DROP_MONITOR;
+ /*
+ * Allow the cooked monitor interface of an AP to see 4-addr frames so
+ * that a 4-addr station can be detected and moved into a separate VLAN
+ */
+ if (ieee80211_has_a4(hdr->frame_control) &&
+ sdata->vif.type == NL80211_IFTYPE_AP)
+ return RX_DROP_MONITOR;
+
err = __ieee80211_data_to_8023(rx);
if (unlikely(err))
return RX_DROP_UNUSABLE;
switch (sdata->vif.type) {
case NL80211_IFTYPE_STATION:
- if (!bssid)
+ if (!bssid && !sdata->use_4addr)
return 0;
if (!multicast &&
compare_ether_addr(sdata->dev->dev_addr, hdr->addr1) != 0) {
goto drop;
if (status->flag & RX_FLAG_HT) {
- /* rate_idx is MCS index */
- if (WARN_ON(status->rate_idx < 0 ||
- status->rate_idx >= 76))
+ /*
+ * rate_idx is MCS index, which can be [0-76] as documented on:
+ *
+ * http://wireless.kernel.org/en/developers/Documentation/ieee80211/802.11n
+ *
+ * Anything else would be some sort of driver or hardware error.
+ * The driver should catch hardware errors.
+ */
+ if (WARN((status->rate_idx < 0 ||
+ status->rate_idx > 76),
+ "Rate marked as an HT rate but passed "
+ "status->rate_idx is not "
+ "an MCS index [0-76]: %d (0x%02x)\n",
+ status->rate_idx,
+ status->rate_idx))
goto drop;
/* HT rates are not in the table - use the highest legacy rate
* for now since other parts of mac80211 may not yet be fully
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff