* Copyright 2002-2005, Instant802 Networks, Inc.
* Copyright 2005, Devicescape Software, Inc.
* Copyright 2007, Mattias Nissler <mattias.nissler@gmx.de>
- * Copyright 2007, Stefano Brivio <stefano.brivio@polimi.it>
+ * Copyright 2007-2008, Stefano Brivio <stefano.brivio@polimi.it>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#include <linux/netdevice.h>
#include <linux/types.h>
#include <linux/skbuff.h>
-
+#include <linux/debugfs.h>
#include <net/mac80211.h>
-#include "ieee80211_rate.h"
-
+#include "rate.h"
+#include "mesh.h"
#include "rc80211_pid.h"
*/
-/* Shift the adjustment so that we won't switch to a lower rate if it exhibited
- * a worse failed frames behaviour and we'll choose the highest rate whose
- * failed frames behaviour is not worse than the one of the original rate
- * target. While at it, check that the adjustment is within the ranges. Then,
- * provide the new rate index. */
-static int rate_control_pid_shift_adjust(struct rc_pid_rateinfo *r,
- int adj, int cur, int l)
+/* Adjust the rate while ensuring that we won't switch to a lower rate if it
+ * exhibited a worse failed frames behaviour and we'll choose the highest rate
+ * whose failed frames behaviour is not worse than the one of the original rate
+ * target. While at it, check that the new rate is valid. */
+static void rate_control_pid_adjust_rate(struct ieee80211_supported_band *sband,
+ struct ieee80211_sta *sta,
+ struct rc_pid_sta_info *spinfo, int adj,
+ struct rc_pid_rateinfo *rinfo)
{
- int i, j, k, tmp;
+ int cur_sorted, new_sorted, probe, tmp, n_bitrates, band;
+ int cur = spinfo->txrate_idx;
- if (cur + adj < 0)
- return 0;
- if (cur + adj >= l)
- return l - 1;
+ band = sband->band;
+ n_bitrates = sband->n_bitrates;
- i = r[cur + adj].rev_index;
+ /* Map passed arguments to sorted values. */
+ cur_sorted = rinfo[cur].rev_index;
+ new_sorted = cur_sorted + adj;
- j = r[cur].rev_index;
+ /* Check limits. */
+ if (new_sorted < 0)
+ new_sorted = rinfo[0].rev_index;
+ else if (new_sorted >= n_bitrates)
+ new_sorted = rinfo[n_bitrates - 1].rev_index;
- if (adj < 0) {
- tmp = i;
- for (k = j; k >= i; k--)
- if (r[k].diff <= r[j].diff)
- tmp = k;
- return r[tmp].index;
- } else if (adj > 0) {
- tmp = i;
- for (k = i + 1; k + i < l; k++)
- if (r[k].diff <= r[i].diff)
- tmp = k;
- return r[tmp].index;
- }
- return cur + adj;
-}
+ tmp = new_sorted;
-static void rate_control_pid_adjust_rate(struct ieee80211_local *local,
- struct sta_info *sta, int adj,
- struct rc_pid_rateinfo *rinfo)
-{
- struct ieee80211_sub_if_data *sdata;
- struct ieee80211_hw_mode *mode;
- int newidx;
- int maxrate;
- int back = (adj > 0) ? 1 : -1;
-
- sdata = IEEE80211_DEV_TO_SUB_IF(sta->dev);
- if (sdata->bss && sdata->bss->force_unicast_rateidx > -1) {
- /* forced unicast rate - do not change STA rate */
- return;
+ if (adj < 0) {
+ /* Ensure that the rate decrease isn't disadvantageous. */
+ for (probe = cur_sorted; probe >= new_sorted; probe--)
+ if (rinfo[probe].diff <= rinfo[cur_sorted].diff &&
+ rate_supported(sta, band, rinfo[probe].index))
+ tmp = probe;
+ } else {
+ /* Look for rate increase with zero (or below) cost. */
+ for (probe = new_sorted + 1; probe < n_bitrates; probe++)
+ if (rinfo[probe].diff <= rinfo[new_sorted].diff &&
+ rate_supported(sta, band, rinfo[probe].index))
+ tmp = probe;
}
- mode = local->oper_hw_mode;
- maxrate = sdata->bss ? sdata->bss->max_ratectrl_rateidx : -1;
-
- newidx = rate_control_pid_shift_adjust(rinfo, adj, sta->txrate,
- mode->num_rates);
-
- while (newidx != sta->txrate) {
- if (rate_supported(sta, mode, newidx) &&
- (maxrate < 0 || newidx <= maxrate)) {
- sta->txrate = newidx;
+ /* Fit the rate found to the nearest supported rate. */
+ do {
+ if (rate_supported(sta, band, rinfo[tmp].index)) {
+ spinfo->txrate_idx = rinfo[tmp].index;
break;
}
-
- newidx += back;
- }
+ if (adj < 0)
+ tmp--;
+ else
+ tmp++;
+ } while (tmp < n_bitrates && tmp >= 0);
#ifdef CONFIG_MAC80211_DEBUGFS
- rate_control_pid_event_rate_change(
- &((struct rc_pid_sta_info *)sta->rate_ctrl_priv)->events,
- newidx, mode->rates[newidx].rate);
+ rate_control_pid_event_rate_change(&spinfo->events,
+ spinfo->txrate_idx,
+ sband->bitrates[spinfo->txrate_idx].bitrate);
#endif
}
}
static void rate_control_pid_sample(struct rc_pid_info *pinfo,
- struct ieee80211_local *local,
- struct sta_info *sta)
+ struct ieee80211_supported_band *sband,
+ struct ieee80211_sta *sta,
+ struct rc_pid_sta_info *spinfo)
{
- struct rc_pid_sta_info *spinfo = sta->rate_ctrl_priv;
struct rc_pid_rateinfo *rinfo = pinfo->rinfo;
- struct ieee80211_hw_mode *mode;
u32 pf;
s32 err_avg;
u32 err_prop;
int adj, i, j, tmp;
unsigned long period;
- mode = local->oper_hw_mode;
- spinfo = sta->rate_ctrl_priv;
-
/* In case nothing happened during the previous control interval, turn
* the sharpening factor on. */
period = (HZ * pinfo->sampling_period + 500) / 1000;
* still a good measurement and copy it. */
if (unlikely(spinfo->tx_num_xmit == 0))
pf = spinfo->last_pf;
- else {
+ else
pf = spinfo->tx_num_failed * 100 / spinfo->tx_num_xmit;
- pf <<= RC_PID_ARITH_SHIFT;
- }
spinfo->tx_num_xmit = 0;
spinfo->tx_num_failed = 0;
/* If we just switched rate, update the rate behaviour info. */
- if (pinfo->oldrate != sta->txrate) {
+ if (pinfo->oldrate != spinfo->txrate_idx) {
i = rinfo[pinfo->oldrate].rev_index;
- j = rinfo[sta->txrate].rev_index;
+ j = rinfo[spinfo->txrate_idx].rev_index;
tmp = (pf - spinfo->last_pf);
tmp = RC_PID_DO_ARITH_RIGHT_SHIFT(tmp, RC_PID_ARITH_SHIFT);
rinfo[j].diff = rinfo[i].diff + tmp;
- pinfo->oldrate = sta->txrate;
+ pinfo->oldrate = spinfo->txrate_idx;
}
- rate_control_pid_normalize(pinfo, mode->num_rates);
+ rate_control_pid_normalize(pinfo, sband->n_bitrates);
/* Compute the proportional, integral and derivative errors. */
- err_prop = pinfo->target - pf;
+ err_prop = (pinfo->target - pf) << RC_PID_ARITH_SHIFT;
err_avg = spinfo->err_avg_sc >> pinfo->smoothing_shift;
spinfo->err_avg_sc = spinfo->err_avg_sc - err_avg + err_prop;
/* Change rate. */
if (adj)
- rate_control_pid_adjust_rate(local, sta, adj, rinfo);
+ rate_control_pid_adjust_rate(sband, sta, spinfo, adj, rinfo);
}
-static void rate_control_pid_tx_status(void *priv, struct net_device *dev,
- struct sk_buff *skb,
- struct ieee80211_tx_status *status)
+static void rate_control_pid_tx_status(void *priv, struct ieee80211_supported_band *sband,
+ struct ieee80211_sta *sta, void *priv_sta,
+ struct sk_buff *skb)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
struct rc_pid_info *pinfo = priv;
- struct sta_info *sta;
- struct rc_pid_sta_info *spinfo;
+ struct rc_pid_sta_info *spinfo = priv_sta;
unsigned long period;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
- sta = sta_info_get(local, hdr->addr1);
-
- if (!sta)
+ if (!spinfo)
return;
/* Ignore all frames that were sent with a different rate than the rate
* we currently advise mac80211 to use. */
- if (status->control.rate != &local->oper_hw_mode->rates[sta->txrate])
+ if (info->status.rates[0].idx != spinfo->txrate_idx)
return;
- spinfo = sta->rate_ctrl_priv;
spinfo->tx_num_xmit++;
#ifdef CONFIG_MAC80211_DEBUGFS
- rate_control_pid_event_tx_status(&spinfo->events, status);
+ rate_control_pid_event_tx_status(&spinfo->events, info);
#endif
/* We count frames that totally failed to be transmitted as two bad
* frames, those that made it out but had some retries as one good and
* one bad frame. */
- if (status->excessive_retries) {
+ if (!(info->flags & IEEE80211_TX_STAT_ACK)) {
spinfo->tx_num_failed += 2;
spinfo->tx_num_xmit++;
- } else if (status->retry_count) {
+ } else if (info->status.rates[0].count > 1) {
spinfo->tx_num_failed++;
spinfo->tx_num_xmit++;
}
- if (status->excessive_retries) {
- sta->tx_retry_failed++;
- sta->tx_num_consecutive_failures++;
- sta->tx_num_mpdu_fail++;
- } else {
- sta->last_ack_rssi[0] = sta->last_ack_rssi[1];
- sta->last_ack_rssi[1] = sta->last_ack_rssi[2];
- sta->last_ack_rssi[2] = status->ack_signal;
- sta->tx_num_consecutive_failures = 0;
- sta->tx_num_mpdu_ok++;
- }
- sta->tx_retry_count += status->retry_count;
- sta->tx_num_mpdu_fail += status->retry_count;
-
/* Update PID controller state. */
period = (HZ * pinfo->sampling_period + 500) / 1000;
if (!period)
period = 1;
if (time_after(jiffies, spinfo->last_sample + period))
- rate_control_pid_sample(pinfo, local, sta);
-
- sta_info_put(sta);
+ rate_control_pid_sample(pinfo, sband, sta, spinfo);
}
-static void rate_control_pid_get_rate(void *priv, struct net_device *dev,
- struct ieee80211_hw_mode *mode,
- struct sk_buff *skb,
- struct rate_selection *sel)
+static void
+rate_control_pid_get_rate(void *priv, struct ieee80211_sta *sta,
+ void *priv_sta,
+ struct ieee80211_tx_rate_control *txrc)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
- struct sta_info *sta;
+ struct sk_buff *skb = txrc->skb;
+ struct ieee80211_supported_band *sband = txrc->sband;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct rc_pid_sta_info *spinfo = priv_sta;
int rateidx;
- sta = sta_info_get(local, hdr->addr1);
+ if (txrc->rts)
+ info->control.rates[0].count =
+ txrc->hw->conf.long_frame_max_tx_count;
+ else
+ info->control.rates[0].count =
+ txrc->hw->conf.short_frame_max_tx_count;
- if (!sta) {
- sel->rate = rate_lowest(local, mode, NULL);
- sta_info_put(sta);
+ /* Send management frames and NO_ACK data using lowest rate. */
+ if (rate_control_send_low(sta, priv_sta, txrc))
return;
- }
-
- rateidx = sta->txrate;
- if (rateidx >= mode->num_rates)
- rateidx = mode->num_rates - 1;
+ rateidx = spinfo->txrate_idx;
- sta_info_put(sta);
+ if (rateidx >= sband->n_bitrates)
+ rateidx = sband->n_bitrates - 1;
- sel->rate = &mode->rates[rateidx];
+ info->control.rates[0].idx = rateidx;
#ifdef CONFIG_MAC80211_DEBUGFS
- rate_control_pid_event_tx_rate(
- &((struct rc_pid_sta_info *) sta->rate_ctrl_priv)->events,
- rateidx, mode->rates[rateidx].rate);
+ rate_control_pid_event_tx_rate(&spinfo->events,
+ rateidx, sband->bitrates[rateidx].bitrate);
#endif
}
-static void rate_control_pid_rate_init(void *priv, void *priv_sta,
- struct ieee80211_local *local,
- struct sta_info *sta)
+static void
+rate_control_pid_rate_init(void *priv, struct ieee80211_supported_band *sband,
+ struct ieee80211_sta *sta, void *priv_sta)
{
+ struct rc_pid_sta_info *spinfo = priv_sta;
+ struct rc_pid_info *pinfo = priv;
+ struct rc_pid_rateinfo *rinfo = pinfo->rinfo;
+ int i, j, tmp;
+ bool s;
+
/* TODO: This routine should consider using RSSI from previous packets
* as we need to have IEEE 802.1X auth succeed immediately after assoc..
* Until that method is implemented, we will use the lowest supported
* rate as a workaround. */
- sta->txrate = rate_lowest_index(local, local->oper_hw_mode, sta);
-}
-
-static void *rate_control_pid_alloc(struct ieee80211_local *local)
-{
- struct rc_pid_info *pinfo;
- struct rc_pid_rateinfo *rinfo;
- struct ieee80211_hw_mode *mode;
- int i, j, tmp;
- bool s;
-#ifdef CONFIG_MAC80211_DEBUGFS
- struct rc_pid_debugfs_entries *de;
-#endif
-
- pinfo = kmalloc(sizeof(*pinfo), GFP_ATOMIC);
- if (!pinfo)
- return NULL;
-
- /* We can safely assume that oper_hw_mode won't change unless we get
- * reinitialized. */
- mode = local->oper_hw_mode;
- rinfo = kmalloc(sizeof(*rinfo) * mode->num_rates, GFP_ATOMIC);
- if (!rinfo) {
- kfree(pinfo);
- return NULL;
- }
/* Sort the rates. This is optimized for the most common case (i.e.
* almost-sorted CCK+OFDM rates). Kind of bubble-sort with reversed
* mapping too. */
- for (i = 0; i < mode->num_rates; i++) {
+ for (i = 0; i < sband->n_bitrates; i++) {
rinfo[i].index = i;
rinfo[i].rev_index = i;
- if (pinfo->fast_start)
+ if (RC_PID_FAST_START)
rinfo[i].diff = 0;
else
rinfo[i].diff = i * pinfo->norm_offset;
}
- for (i = 1; i < mode->num_rates; i++) {
+ for (i = 1; i < sband->n_bitrates; i++) {
s = 0;
- for (j = 0; j < mode->num_rates - i; j++)
- if (unlikely(mode->rates[rinfo[j].index].rate >
- mode->rates[rinfo[j + 1].index].rate)) {
+ for (j = 0; j < sband->n_bitrates - i; j++)
+ if (unlikely(sband->bitrates[rinfo[j].index].bitrate >
+ sband->bitrates[rinfo[j + 1].index].bitrate)) {
tmp = rinfo[j].index;
rinfo[j].index = rinfo[j + 1].index;
rinfo[j + 1].index = tmp;
break;
}
+ spinfo->txrate_idx = rate_lowest_index(sband, sta);
+}
+
+static void *rate_control_pid_alloc(struct ieee80211_hw *hw,
+ struct dentry *debugfsdir)
+{
+ struct rc_pid_info *pinfo;
+ struct rc_pid_rateinfo *rinfo;
+ struct ieee80211_supported_band *sband;
+ int i, max_rates = 0;
+#ifdef CONFIG_MAC80211_DEBUGFS
+ struct rc_pid_debugfs_entries *de;
+#endif
+
+ pinfo = kmalloc(sizeof(*pinfo), GFP_ATOMIC);
+ if (!pinfo)
+ return NULL;
+
+ for (i = 0; i < IEEE80211_NUM_BANDS; i++) {
+ sband = hw->wiphy->bands[i];
+ if (sband && sband->n_bitrates > max_rates)
+ max_rates = sband->n_bitrates;
+ }
+
+ rinfo = kmalloc(sizeof(*rinfo) * max_rates, GFP_ATOMIC);
+ if (!rinfo) {
+ kfree(pinfo);
+ return NULL;
+ }
+
pinfo->target = RC_PID_TARGET_PF;
pinfo->sampling_period = RC_PID_INTERVAL;
pinfo->coeff_p = RC_PID_COEFF_P;
pinfo->sharpen_factor = RC_PID_SHARPENING_FACTOR;
pinfo->sharpen_duration = RC_PID_SHARPENING_DURATION;
pinfo->norm_offset = RC_PID_NORM_OFFSET;
- pinfo->fast_start = RC_PID_FAST_START;
pinfo->rinfo = rinfo;
pinfo->oldrate = 0;
#ifdef CONFIG_MAC80211_DEBUGFS
de = &pinfo->dentries;
- de->dir = debugfs_create_dir("rc80211_pid",
- local->hw.wiphy->debugfsdir);
de->target = debugfs_create_u32("target_pf", S_IRUSR | S_IWUSR,
- de->dir, &pinfo->target);
+ debugfsdir, &pinfo->target);
de->sampling_period = debugfs_create_u32("sampling_period",
- S_IRUSR | S_IWUSR, de->dir,
+ S_IRUSR | S_IWUSR, debugfsdir,
&pinfo->sampling_period);
de->coeff_p = debugfs_create_u32("coeff_p", S_IRUSR | S_IWUSR,
- de->dir, &pinfo->coeff_p);
+ debugfsdir, (u32 *)&pinfo->coeff_p);
de->coeff_i = debugfs_create_u32("coeff_i", S_IRUSR | S_IWUSR,
- de->dir, &pinfo->coeff_i);
+ debugfsdir, (u32 *)&pinfo->coeff_i);
de->coeff_d = debugfs_create_u32("coeff_d", S_IRUSR | S_IWUSR,
- de->dir, &pinfo->coeff_d);
+ debugfsdir, (u32 *)&pinfo->coeff_d);
de->smoothing_shift = debugfs_create_u32("smoothing_shift",
- S_IRUSR | S_IWUSR, de->dir,
+ S_IRUSR | S_IWUSR, debugfsdir,
&pinfo->smoothing_shift);
de->sharpen_factor = debugfs_create_u32("sharpen_factor",
- S_IRUSR | S_IWUSR, de->dir,
+ S_IRUSR | S_IWUSR, debugfsdir,
&pinfo->sharpen_factor);
de->sharpen_duration = debugfs_create_u32("sharpen_duration",
- S_IRUSR | S_IWUSR, de->dir,
+ S_IRUSR | S_IWUSR, debugfsdir,
&pinfo->sharpen_duration);
de->norm_offset = debugfs_create_u32("norm_offset",
- S_IRUSR | S_IWUSR, de->dir,
+ S_IRUSR | S_IWUSR, debugfsdir,
&pinfo->norm_offset);
- de->fast_start = debugfs_create_bool("fast_start",
- S_IRUSR | S_IWUSR, de->dir,
- &pinfo->fast_start);
#endif
return pinfo;
#ifdef CONFIG_MAC80211_DEBUGFS
struct rc_pid_debugfs_entries *de = &pinfo->dentries;
- debugfs_remove(de->fast_start);
debugfs_remove(de->norm_offset);
debugfs_remove(de->sharpen_duration);
debugfs_remove(de->sharpen_factor);
debugfs_remove(de->coeff_p);
debugfs_remove(de->sampling_period);
debugfs_remove(de->target);
- debugfs_remove(de->dir);
#endif
kfree(pinfo->rinfo);
kfree(pinfo);
}
-static void rate_control_pid_clear(void *priv)
-{
-}
-
-static void *rate_control_pid_alloc_sta(void *priv, gfp_t gfp)
+static void *rate_control_pid_alloc_sta(void *priv, struct ieee80211_sta *sta,
+ gfp_t gfp)
{
struct rc_pid_sta_info *spinfo;
if (spinfo == NULL)
return NULL;
+ spinfo->last_sample = jiffies;
+
#ifdef CONFIG_MAC80211_DEBUGFS
spin_lock_init(&spinfo->events.lock);
init_waitqueue_head(&spinfo->events.waitqueue);
return spinfo;
}
-static void rate_control_pid_free_sta(void *priv, void *priv_sta)
+static void rate_control_pid_free_sta(void *priv, struct ieee80211_sta *sta,
+ void *priv_sta)
{
- struct rc_pid_sta_info *spinfo = priv_sta;
- kfree(spinfo);
+ kfree(priv_sta);
}
-struct rate_control_ops mac80211_rcpid = {
+static struct rate_control_ops mac80211_rcpid = {
.name = "pid",
.tx_status = rate_control_pid_tx_status,
.get_rate = rate_control_pid_get_rate,
.rate_init = rate_control_pid_rate_init,
- .clear = rate_control_pid_clear,
.alloc = rate_control_pid_alloc,
.free = rate_control_pid_free,
.alloc_sta = rate_control_pid_alloc_sta,
.remove_sta_debugfs = rate_control_pid_remove_sta_debugfs,
#endif
};
+
+int __init rc80211_pid_init(void)
+{
+ return ieee80211_rate_control_register(&mac80211_rcpid);
+}
+
+void rc80211_pid_exit(void)
+{
+ ieee80211_rate_control_unregister(&mac80211_rcpid);
+}