#include <linux/kernel.h>
#include <linux/rtnetlink.h>
+#include <linux/slab.h>
#include "rate.h"
#include "ieee80211_i.h"
#include "debugfs.h"
};
#endif
-struct rate_control_ref *rate_control_alloc(const char *name,
+static struct rate_control_ref *rate_control_alloc(const char *name,
struct ieee80211_local *local)
{
struct dentry *debugfsdir = NULL;
#ifdef CONFIG_MAC80211_DEBUGFS
debugfsdir = debugfs_create_dir("rc", local->hw.wiphy->debugfsdir);
local->debugfs.rcdir = debugfsdir;
- local->debugfs.rcname = debugfs_create_file("name", 0400, debugfsdir,
- ref, &rcname_ops);
+ debugfs_create_file("name", 0400, debugfsdir, ref, &rcname_ops);
#endif
ref->priv = ref->ops->alloc(&local->hw, debugfsdir);
ctrl_ref->ops->free(ctrl_ref->priv);
#ifdef CONFIG_MAC80211_DEBUGFS
- debugfs_remove(ctrl_ref->local->debugfs.rcname);
- ctrl_ref->local->debugfs.rcname = NULL;
- debugfs_remove(ctrl_ref->local->debugfs.rcdir);
+ debugfs_remove_recursive(ctrl_ref->local->debugfs.rcdir);
ctrl_ref->local->debugfs.rcdir = NULL;
#endif
kfree(ctrl_ref);
}
+static bool rc_no_data_or_no_ack(struct ieee80211_tx_rate_control *txrc)
+{
+ struct sk_buff *skb = txrc->skb;
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ __le16 fc;
+
+ fc = hdr->frame_control;
+
+ return ((info->flags & IEEE80211_TX_CTL_NO_ACK) || !ieee80211_is_data(fc));
+}
+
+static void rc_send_low_broadcast(s8 *idx, u32 basic_rates, u8 max_rate_idx)
+{
+ u8 i;
+
+ if (basic_rates == 0)
+ return; /* assume basic rates unknown and accept rate */
+ if (*idx < 0)
+ return;
+ if (basic_rates & (1 << *idx))
+ return; /* selected rate is a basic rate */
+
+ for (i = *idx + 1; i <= max_rate_idx; i++) {
+ if (basic_rates & (1 << i)) {
+ *idx = i;
+ return;
+ }
+ }
+
+ /* could not find a basic rate; use original selection */
+}
+
+bool rate_control_send_low(struct ieee80211_sta *sta,
+ void *priv_sta,
+ struct ieee80211_tx_rate_control *txrc)
+{
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(txrc->skb);
+
+ if (!sta || !priv_sta || rc_no_data_or_no_ack(txrc)) {
+ info->control.rates[0].idx = rate_lowest_index(txrc->sband, sta);
+ info->control.rates[0].count =
+ (info->flags & IEEE80211_TX_CTL_NO_ACK) ?
+ 1 : txrc->hw->max_rate_tries;
+ if (!sta && txrc->ap)
+ rc_send_low_broadcast(&info->control.rates[0].idx,
+ txrc->bss_conf->basic_rates,
+ txrc->sband->n_bitrates);
+ return true;
+ }
+ return false;
+}
+EXPORT_SYMBOL(rate_control_send_low);
+
+static void rate_idx_match_mask(struct ieee80211_tx_rate *rate,
+ int n_bitrates, u32 mask)
+{
+ int j;
+
+ /* See whether the selected rate or anything below it is allowed. */
+ for (j = rate->idx; j >= 0; j--) {
+ if (mask & (1 << j)) {
+ /* Okay, found a suitable rate. Use it. */
+ rate->idx = j;
+ return;
+ }
+ }
+
+ /* Try to find a higher rate that would be allowed */
+ for (j = rate->idx + 1; j < n_bitrates; j++) {
+ if (mask & (1 << j)) {
+ /* Okay, found a suitable rate. Use it. */
+ rate->idx = j;
+ return;
+ }
+ }
+
+ /*
+ * Uh.. No suitable rate exists. This should not really happen with
+ * sane TX rate mask configurations. However, should someone manage to
+ * configure supported rates and TX rate mask in incompatible way,
+ * allow the frame to be transmitted with whatever the rate control
+ * selected.
+ */
+}
+
void rate_control_get_rate(struct ieee80211_sub_if_data *sdata,
- struct ieee80211_supported_band *sband,
- struct sta_info *sta, struct sk_buff *skb,
- struct rate_selection *sel)
+ struct sta_info *sta,
+ struct ieee80211_tx_rate_control *txrc)
{
struct rate_control_ref *ref = sdata->local->rate_ctrl;
void *priv_sta = NULL;
struct ieee80211_sta *ista = NULL;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(txrc->skb);
int i;
-
- sel->rate_idx = -1;
- sel->nonerp_idx = -1;
- sel->probe_idx = -1;
- sel->max_rate_idx = sdata->max_ratectrl_rateidx;
+ u32 mask;
if (sta) {
ista = &sta->sta;
priv_sta = sta->rate_ctrl_priv;
}
- if (sta && sdata->force_unicast_rateidx > -1)
- sel->rate_idx = sdata->force_unicast_rateidx;
- else
- ref->ops->get_rate(ref->priv, sband, ista, priv_sta, skb, sel);
-
- if (sdata->max_ratectrl_rateidx > -1 &&
- sel->rate_idx > sdata->max_ratectrl_rateidx)
- sel->rate_idx = sdata->max_ratectrl_rateidx;
-
- BUG_ON(sel->rate_idx < 0);
-
- /* Select a non-ERP backup rate. */
- if (sel->nonerp_idx < 0) {
- for (i = 0; i < sband->n_bitrates; i++) {
- struct ieee80211_rate *rate = &sband->bitrates[i];
- if (sband->bitrates[sel->rate_idx].bitrate < rate->bitrate)
- break;
+ for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
+ info->control.rates[i].idx = -1;
+ info->control.rates[i].flags = 0;
+ info->control.rates[i].count = 1;
+ }
- if (rate_supported(ista, sband->band, i) &&
- !(rate->flags & IEEE80211_RATE_ERP_G))
- sel->nonerp_idx = i;
+ if (sdata->local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL)
+ return;
+
+ ref->ops->get_rate(ref->priv, ista, priv_sta, txrc);
+
+ /*
+ * Try to enforce the rateidx mask the user wanted. skip this if the
+ * default mask (allow all rates) is used to save some processing for
+ * the common case.
+ */
+ mask = sdata->rc_rateidx_mask[info->band];
+ if (mask != (1 << txrc->sband->n_bitrates) - 1) {
+ if (sta) {
+ /* Filter out rates that the STA does not support */
+ mask &= sta->sta.supp_rates[info->band];
+ }
+ /*
+ * Make sure the rate index selected for each TX rate is
+ * included in the configured mask and change the rate indexes
+ * if needed.
+ */
+ for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
+ /* Rate masking supports only legacy rates for now */
+ if (info->control.rates[i].flags & IEEE80211_TX_RC_MCS)
+ continue;
+ rate_idx_match_mask(&info->control.rates[i],
+ txrc->sband->n_bitrates, mask);
}
}
+
+ BUG_ON(info->control.rates[0].idx < 0);
}
struct rate_control_ref *rate_control_get(struct rate_control_ref *ref)
struct rate_control_ref *ref, *old;
ASSERT_RTNL();
- if (local->open_count || netif_running(local->mdev))
+
+ if (local->open_count)
return -EBUSY;
+ if (local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL) {
+ if (WARN_ON(!local->ops->set_rts_threshold))
+ return -EINVAL;
+ return 0;
+ }
+
ref = rate_control_alloc(name, local);
if (!ref) {
printk(KERN_WARNING "%s: Failed to select rate control "
"algorithm '%s'\n", wiphy_name(local->hw.wiphy),
ref->ops->name);
-
return 0;
}
struct rate_control_ref *ref;
ref = local->rate_ctrl;
+
+ if (!ref)
+ return;
+
local->rate_ctrl = NULL;
rate_control_put(ref);
}