#define MESH_SECURITY_AUTHENTICATION_IMPOSSIBLE 9
#define MESH_SECURITY_FAILED_VERIFICATION 10
-#define dot11MeshMaxRetries(s) (s->u.sta.mshcfg.dot11MeshMaxRetries)
-#define dot11MeshRetryTimeout(s) (s->u.sta.mshcfg.dot11MeshRetryTimeout)
-#define dot11MeshConfirmTimeout(s) (s->u.sta.mshcfg.dot11MeshConfirmTimeout)
-#define dot11MeshHoldingTimeout(s) (s->u.sta.mshcfg.dot11MeshHoldingTimeout)
-#define dot11MeshMaxPeerLinks(s) (s->u.sta.mshcfg.dot11MeshMaxPeerLinks)
+#define dot11MeshMaxRetries(s) (s->u.mesh.mshcfg.dot11MeshMaxRetries)
+#define dot11MeshRetryTimeout(s) (s->u.mesh.mshcfg.dot11MeshRetryTimeout)
+#define dot11MeshConfirmTimeout(s) (s->u.mesh.mshcfg.dot11MeshConfirmTimeout)
+#define dot11MeshHoldingTimeout(s) (s->u.mesh.mshcfg.dot11MeshHoldingTimeout)
+#define dot11MeshMaxPeerLinks(s) (s->u.mesh.mshcfg.dot11MeshMaxPeerLinks)
enum plink_frame_type {
PLINK_OPEN = 0,
static inline
void mesh_plink_inc_estab_count(struct ieee80211_sub_if_data *sdata)
{
- atomic_inc(&sdata->u.sta.mshstats.estab_plinks);
+ atomic_inc(&sdata->u.mesh.mshstats.estab_plinks);
mesh_accept_plinks_update(sdata);
}
static inline
void mesh_plink_dec_estab_count(struct ieee80211_sub_if_data *sdata)
{
- atomic_dec(&sdata->u.sta.mshstats.estab_plinks);
+ atomic_dec(&sdata->u.mesh.mshstats.estab_plinks);
mesh_accept_plinks_update(sdata);
}
*
* @sta: mes peer link to restart
*
- * Locking: this function must be called holding sta->plink_lock
+ * Locking: this function must be called holding sta->lock
*/
static inline void mesh_plink_fsm_restart(struct sta_info *sta)
{
* on it in the lifecycle management section!
*/
static struct sta_info *mesh_plink_alloc(struct ieee80211_sub_if_data *sdata,
- u8 *hw_addr, u64 rates)
+ u8 *hw_addr, u32 rates)
{
struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
if (!sta)
return NULL;
- sta->flags |= WLAN_STA_AUTHORIZED;
- sta->supp_rates[local->hw.conf.channel->band] = rates;
+ sta->flags = WLAN_STA_AUTHORIZED;
+ sta->sta.supp_rates[local->hw.conf.channel->band] = rates;
+ rate_control_rate_init(sta);
return sta;
}
*
* All mesh paths with this peer as next hop will be flushed
*
- * Locking: the caller must hold sta->plink_lock
+ * Locking: the caller must hold sta->lock
*/
static void __mesh_plink_deactivate(struct sta_info *sta)
{
*/
void mesh_plink_deactivate(struct sta_info *sta)
{
- spin_lock_bh(&sta->plink_lock);
+ spin_lock_bh(&sta->lock);
__mesh_plink_deactivate(sta);
- spin_unlock_bh(&sta->plink_lock);
+ spin_unlock_bh(&sta->lock);
}
-static int mesh_plink_frame_tx(struct net_device *dev,
+static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata,
enum plink_frame_type action, u8 *da, __le16 llid, __le16 plid,
__le16 reason) {
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_local *local = sdata->local;
struct sk_buff *skb = dev_alloc_skb(local->hw.extra_tx_headroom + 400);
struct ieee80211_mgmt *mgmt;
bool include_plid = false;
mgmt = (struct ieee80211_mgmt *)
skb_put(skb, 25 + sizeof(mgmt->u.action.u.plink_action));
memset(mgmt, 0, 25 + sizeof(mgmt->u.action.u.plink_action));
- mgmt->frame_control = IEEE80211_FC(IEEE80211_FTYPE_MGMT,
- IEEE80211_STYPE_ACTION);
+ mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
+ IEEE80211_STYPE_ACTION);
memcpy(mgmt->da, da, ETH_ALEN);
- memcpy(mgmt->sa, dev->dev_addr, ETH_ALEN);
+ memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
/* BSSID is left zeroed, wildcard value */
mgmt->u.action.category = PLINK_CATEGORY;
mgmt->u.action.u.plink_action.action_code = action;
/* two-byte status code followed by two-byte AID */
memset(pos, 0, 4);
}
- mesh_mgmt_ies_add(skb, dev);
+ mesh_mgmt_ies_add(skb, sdata);
}
/* Add Peer Link Management element */
memcpy(pos, &reason, 2);
}
- ieee80211_sta_tx(dev, skb, 0);
+ ieee80211_tx_skb(sdata, skb, 1);
return 0;
}
-void mesh_neighbour_update(u8 *hw_addr, u64 rates, struct net_device *dev,
+void mesh_neighbour_update(u8 *hw_addr, u32 rates, struct ieee80211_sub_if_data *sdata,
bool peer_accepting_plinks)
{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
rcu_read_lock();
}
sta->last_rx = jiffies;
- sta->supp_rates[local->hw.conf.channel->band] = rates;
+ sta->sta.supp_rates[local->hw.conf.channel->band] = rates;
if (peer_accepting_plinks && sta->plink_state == PLINK_LISTEN &&
- sdata->u.sta.accepting_plinks &&
- sdata->u.sta.mshcfg.auto_open_plinks)
+ sdata->u.mesh.accepting_plinks &&
+ sdata->u.mesh.mshcfg.auto_open_plinks)
mesh_plink_open(sta);
rcu_read_unlock();
{
struct sta_info *sta;
__le16 llid, plid, reason;
- struct net_device *dev = NULL;
struct ieee80211_sub_if_data *sdata;
-#ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG
- DECLARE_MAC_BUF(mac);
-#endif
/*
* This STA is valid because sta_info_destroy() will
*/
sta = (struct sta_info *) data;
- spin_lock_bh(&sta->plink_lock);
+ if (sta->sdata->local->quiescing) {
+ sta->plink_timer_was_running = true;
+ return;
+ }
+
+ spin_lock_bh(&sta->lock);
if (sta->ignore_plink_timer) {
sta->ignore_plink_timer = false;
- spin_unlock_bh(&sta->plink_lock);
+ spin_unlock_bh(&sta->lock);
return;
}
- mpl_dbg("Mesh plink timer for %s fired on state %d\n",
- print_mac(mac, sta->addr), sta->plink_state);
+ mpl_dbg("Mesh plink timer for %pM fired on state %d\n",
+ sta->sta.addr, sta->plink_state);
reason = 0;
llid = sta->llid;
plid = sta->plid;
sdata = sta->sdata;
- dev = sdata->dev;
switch (sta->plink_state) {
case PLINK_OPN_RCVD:
/* retry timer */
if (sta->plink_retries < dot11MeshMaxRetries(sdata)) {
u32 rand;
- mpl_dbg("Mesh plink for %s (retry, timeout): %d %d\n",
- print_mac(mac, sta->addr),
- sta->plink_retries, sta->plink_timeout);
+ mpl_dbg("Mesh plink for %pM (retry, timeout): %d %d\n",
+ sta->sta.addr, sta->plink_retries,
+ sta->plink_timeout);
get_random_bytes(&rand, sizeof(u32));
sta->plink_timeout = sta->plink_timeout +
rand % sta->plink_timeout;
++sta->plink_retries;
mod_plink_timer(sta, sta->plink_timeout);
- spin_unlock_bh(&sta->plink_lock);
- mesh_plink_frame_tx(dev, PLINK_OPEN, sta->addr, llid,
+ spin_unlock_bh(&sta->lock);
+ mesh_plink_frame_tx(sdata, PLINK_OPEN, sta->sta.addr, llid,
0, 0);
break;
}
reason = cpu_to_le16(MESH_CONFIRM_TIMEOUT);
sta->plink_state = PLINK_HOLDING;
mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata));
- spin_unlock_bh(&sta->plink_lock);
- mesh_plink_frame_tx(dev, PLINK_CLOSE, sta->addr, llid, plid,
+ spin_unlock_bh(&sta->lock);
+ mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->sta.addr, llid, plid,
reason);
break;
case PLINK_HOLDING:
/* holding timer */
del_timer(&sta->plink_timer);
mesh_plink_fsm_restart(sta);
- spin_unlock_bh(&sta->plink_lock);
+ spin_unlock_bh(&sta->lock);
break;
default:
- spin_unlock_bh(&sta->plink_lock);
+ spin_unlock_bh(&sta->lock);
break;
}
}
+#ifdef CONFIG_PM
+void mesh_plink_quiesce(struct sta_info *sta)
+{
+ if (del_timer_sync(&sta->plink_timer))
+ sta->plink_timer_was_running = true;
+}
+
+void mesh_plink_restart(struct sta_info *sta)
+{
+ if (sta->plink_timer_was_running) {
+ add_timer(&sta->plink_timer);
+ sta->plink_timer_was_running = false;
+ }
+}
+#endif
+
static inline void mesh_plink_timer_set(struct sta_info *sta, int timeout)
{
sta->plink_timer.expires = jiffies + (HZ * timeout / 1000);
{
__le16 llid;
struct ieee80211_sub_if_data *sdata = sta->sdata;
-#ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG
- DECLARE_MAC_BUF(mac);
-#endif
- spin_lock_bh(&sta->plink_lock);
+ spin_lock_bh(&sta->lock);
get_random_bytes(&llid, 2);
sta->llid = llid;
if (sta->plink_state != PLINK_LISTEN) {
- spin_unlock_bh(&sta->plink_lock);
+ spin_unlock_bh(&sta->lock);
return -EBUSY;
}
sta->plink_state = PLINK_OPN_SNT;
mesh_plink_timer_set(sta, dot11MeshRetryTimeout(sdata));
- spin_unlock_bh(&sta->plink_lock);
- mpl_dbg("Mesh plink: starting establishment with %s\n",
- print_mac(mac, sta->addr));
+ spin_unlock_bh(&sta->lock);
+ mpl_dbg("Mesh plink: starting establishment with %pM\n",
+ sta->sta.addr);
- return mesh_plink_frame_tx(sdata->dev, PLINK_OPEN,
- sta->addr, llid, 0, 0);
+ return mesh_plink_frame_tx(sdata, PLINK_OPEN,
+ sta->sta.addr, llid, 0, 0);
}
void mesh_plink_block(struct sta_info *sta)
{
-#ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG
- DECLARE_MAC_BUF(mac);
-#endif
-
- spin_lock_bh(&sta->plink_lock);
+ spin_lock_bh(&sta->lock);
__mesh_plink_deactivate(sta);
sta->plink_state = PLINK_BLOCKED;
- spin_unlock_bh(&sta->plink_lock);
+ spin_unlock_bh(&sta->lock);
}
-int mesh_plink_close(struct sta_info *sta)
-{
- struct ieee80211_sub_if_data *sdata = sta->sdata;
- __le16 llid, plid, reason;
-#ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG
- DECLARE_MAC_BUF(mac);
-#endif
- mpl_dbg("Mesh plink: closing link with %s\n",
- print_mac(mac, sta->addr));
- spin_lock_bh(&sta->plink_lock);
- sta->reason = cpu_to_le16(MESH_LINK_CANCELLED);
- reason = sta->reason;
-
- if (sta->plink_state == PLINK_LISTEN ||
- sta->plink_state == PLINK_BLOCKED) {
- mesh_plink_fsm_restart(sta);
- spin_unlock_bh(&sta->plink_lock);
- return 0;
- } else if (sta->plink_state == PLINK_ESTAB) {
- __mesh_plink_deactivate(sta);
- /* The timer should not be running */
- mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata));
- } else if (!mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata)))
- sta->ignore_plink_timer = true;
-
- sta->plink_state = PLINK_HOLDING;
- llid = sta->llid;
- plid = sta->plid;
- spin_unlock_bh(&sta->plink_lock);
- mesh_plink_frame_tx(sta->sdata->dev, PLINK_CLOSE, sta->addr, llid,
- plid, reason);
- return 0;
-}
-
-void mesh_rx_plink_frame(struct net_device *dev, struct ieee80211_mgmt *mgmt,
+void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt,
size_t len, struct ieee80211_rx_status *rx_status)
{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = sdata->local;
struct ieee802_11_elems elems;
struct sta_info *sta;
u8 ie_len;
u8 *baseaddr;
__le16 plid, llid, reason;
-#ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG
- DECLARE_MAC_BUF(mac);
-#endif
+
+ /* need action_code, aux */
+ if (len < IEEE80211_MIN_ACTION_SIZE + 3)
+ return;
if (is_multicast_ether_addr(mgmt->da)) {
mpl_dbg("Mesh plink: ignore frame from multicast address");
baselen = (u8 *) mgmt->u.action.u.plink_action.variable - (u8 *) mgmt;
if (mgmt->u.action.u.plink_action.action_code == PLINK_CONFIRM) {
baseaddr += 4;
- baselen -= 4;
+ baselen += 4;
}
ieee802_11_parse_elems(baseaddr, len - baselen, &elems);
if (!elems.peer_link) {
/* Now we will figure out the appropriate event... */
event = PLINK_UNDEFINED;
- if (ftype != PLINK_CLOSE && (!mesh_matches_local(&elems, dev))) {
+ if (ftype != PLINK_CLOSE && (!mesh_matches_local(&elems, sdata))) {
switch (ftype) {
case PLINK_OPEN:
event = OPN_RJCT;
/* avoid warning */
break;
}
- spin_lock_bh(&sta->plink_lock);
+ spin_lock_bh(&sta->lock);
} else if (!sta) {
/* ftype == PLINK_OPEN */
- u64 rates;
+ u32 rates;
if (!mesh_plink_free_count(sdata)) {
mpl_dbg("Mesh plink error: no more free plinks\n");
rcu_read_unlock();
return;
}
event = OPN_ACPT;
- spin_lock_bh(&sta->plink_lock);
+ spin_lock_bh(&sta->lock);
} else {
- spin_lock_bh(&sta->plink_lock);
+ spin_lock_bh(&sta->lock);
switch (ftype) {
case PLINK_OPEN:
if (!mesh_plink_free_count(sdata) ||
break;
default:
mpl_dbg("Mesh plink: unknown frame subtype\n");
- spin_unlock_bh(&sta->plink_lock);
+ spin_unlock_bh(&sta->lock);
rcu_read_unlock();
return;
}
}
- mpl_dbg("Mesh plink (peer, state, llid, plid, event): %s %d %d %d %d\n",
- print_mac(mac, mgmt->sa), sta->plink_state,
- le16_to_cpu(sta->llid), le16_to_cpu(sta->plid),
- event);
+ mpl_dbg("Mesh plink (peer, state, llid, plid, event): %pM %d %d %d %d\n",
+ mgmt->sa, sta->plink_state,
+ le16_to_cpu(sta->llid), le16_to_cpu(sta->plid),
+ event);
reason = 0;
switch (sta->plink_state) {
/* spin_unlock as soon as state is updated at each case */
switch (event) {
case CLS_ACPT:
mesh_plink_fsm_restart(sta);
- spin_unlock_bh(&sta->plink_lock);
+ spin_unlock_bh(&sta->lock);
break;
case OPN_ACPT:
sta->plink_state = PLINK_OPN_RCVD;
get_random_bytes(&llid, 2);
sta->llid = llid;
mesh_plink_timer_set(sta, dot11MeshRetryTimeout(sdata));
- spin_unlock_bh(&sta->plink_lock);
- mesh_plink_frame_tx(dev, PLINK_OPEN, sta->addr, llid,
+ spin_unlock_bh(&sta->lock);
+ mesh_plink_frame_tx(sdata, PLINK_OPEN, sta->sta.addr, llid,
0, 0);
- mesh_plink_frame_tx(dev, PLINK_CONFIRM, sta->addr,
+ mesh_plink_frame_tx(sdata, PLINK_CONFIRM, sta->sta.addr,
llid, plid, 0);
break;
default:
- spin_unlock_bh(&sta->plink_lock);
+ spin_unlock_bh(&sta->lock);
break;
}
break;
sta->ignore_plink_timer = true;
llid = sta->llid;
- spin_unlock_bh(&sta->plink_lock);
- mesh_plink_frame_tx(dev, PLINK_CLOSE, sta->addr, llid,
+ spin_unlock_bh(&sta->lock);
+ mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->sta.addr, llid,
plid, reason);
break;
case OPN_ACPT:
sta->plink_state = PLINK_OPN_RCVD;
sta->plid = plid;
llid = sta->llid;
- spin_unlock_bh(&sta->plink_lock);
- mesh_plink_frame_tx(dev, PLINK_CONFIRM, sta->addr, llid,
+ spin_unlock_bh(&sta->lock);
+ mesh_plink_frame_tx(sdata, PLINK_CONFIRM, sta->sta.addr, llid,
plid, 0);
break;
case CNF_ACPT:
dot11MeshConfirmTimeout(sdata)))
sta->ignore_plink_timer = true;
- spin_unlock_bh(&sta->plink_lock);
+ spin_unlock_bh(&sta->lock);
break;
default:
- spin_unlock_bh(&sta->plink_lock);
+ spin_unlock_bh(&sta->lock);
break;
}
break;
sta->ignore_plink_timer = true;
llid = sta->llid;
- spin_unlock_bh(&sta->plink_lock);
- mesh_plink_frame_tx(dev, PLINK_CLOSE, sta->addr, llid,
+ spin_unlock_bh(&sta->lock);
+ mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->sta.addr, llid,
plid, reason);
break;
case OPN_ACPT:
llid = sta->llid;
- spin_unlock_bh(&sta->plink_lock);
- mesh_plink_frame_tx(dev, PLINK_CONFIRM, sta->addr, llid,
+ spin_unlock_bh(&sta->lock);
+ mesh_plink_frame_tx(sdata, PLINK_CONFIRM, sta->sta.addr, llid,
plid, 0);
break;
case CNF_ACPT:
del_timer(&sta->plink_timer);
sta->plink_state = PLINK_ESTAB;
mesh_plink_inc_estab_count(sdata);
- spin_unlock_bh(&sta->plink_lock);
- mpl_dbg("Mesh plink with %s ESTABLISHED\n",
- print_mac(mac, sta->addr));
+ spin_unlock_bh(&sta->lock);
+ mpl_dbg("Mesh plink with %pM ESTABLISHED\n",
+ sta->sta.addr);
break;
default:
- spin_unlock_bh(&sta->plink_lock);
+ spin_unlock_bh(&sta->lock);
break;
}
break;
sta->ignore_plink_timer = true;
llid = sta->llid;
- spin_unlock_bh(&sta->plink_lock);
- mesh_plink_frame_tx(dev, PLINK_CLOSE, sta->addr, llid,
+ spin_unlock_bh(&sta->lock);
+ mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->sta.addr, llid,
plid, reason);
break;
case OPN_ACPT:
del_timer(&sta->plink_timer);
sta->plink_state = PLINK_ESTAB;
mesh_plink_inc_estab_count(sdata);
- spin_unlock_bh(&sta->plink_lock);
- mpl_dbg("Mesh plink with %s ESTABLISHED\n",
- print_mac(mac, sta->addr));
- mesh_plink_frame_tx(dev, PLINK_CONFIRM, sta->addr, llid,
+ spin_unlock_bh(&sta->lock);
+ mpl_dbg("Mesh plink with %pM ESTABLISHED\n",
+ sta->sta.addr);
+ mesh_plink_frame_tx(sdata, PLINK_CONFIRM, sta->sta.addr, llid,
plid, 0);
break;
default:
- spin_unlock_bh(&sta->plink_lock);
+ spin_unlock_bh(&sta->lock);
break;
}
break;
sta->plink_state = PLINK_HOLDING;
llid = sta->llid;
mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata));
- spin_unlock_bh(&sta->plink_lock);
- mesh_plink_frame_tx(dev, PLINK_CLOSE, sta->addr, llid,
+ spin_unlock_bh(&sta->lock);
+ mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->sta.addr, llid,
plid, reason);
break;
case OPN_ACPT:
llid = sta->llid;
- spin_unlock_bh(&sta->plink_lock);
- mesh_plink_frame_tx(dev, PLINK_CONFIRM, sta->addr, llid,
+ spin_unlock_bh(&sta->lock);
+ mesh_plink_frame_tx(sdata, PLINK_CONFIRM, sta->sta.addr, llid,
plid, 0);
break;
default:
- spin_unlock_bh(&sta->plink_lock);
+ spin_unlock_bh(&sta->lock);
break;
}
break;
if (del_timer(&sta->plink_timer))
sta->ignore_plink_timer = 1;
mesh_plink_fsm_restart(sta);
- spin_unlock_bh(&sta->plink_lock);
+ spin_unlock_bh(&sta->lock);
break;
case OPN_ACPT:
case CNF_ACPT:
case CNF_RJCT:
llid = sta->llid;
reason = sta->reason;
- spin_unlock_bh(&sta->plink_lock);
- mesh_plink_frame_tx(dev, PLINK_CLOSE, sta->addr, llid,
- plid, reason);
+ spin_unlock_bh(&sta->lock);
+ mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->sta.addr,
+ llid, plid, reason);
break;
default:
- spin_unlock_bh(&sta->plink_lock);
+ spin_unlock_bh(&sta->lock);
}
break;
default:
/* should not get here, PLINK_BLOCKED is dealt with at the
* beggining of the function
*/
- spin_unlock_bh(&sta->plink_lock);
+ spin_unlock_bh(&sta->lock);
break;
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff