*/
#include <net/mac80211.h>
-#include <net/ieee80211_radiotap.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/netdevice.h>
#include <linux/wireless.h>
#include <linux/rtnetlink.h>
#include <linux/bitmap.h>
+#include <linux/pm_qos_params.h>
#include <net/net_namespace.h>
#include <net/cfg80211.h>
#include "ieee80211_i.h"
+#include "driver-ops.h"
#include "rate.h"
#include "mesh.h"
#include "wep.h"
-#include "wme.h"
-#include "aes_ccm.h"
#include "led.h"
#include "cfg.h"
#include "debugfs.h"
#include "debugfs_netdev.h"
-/*
- * For seeing transmitted packets on monitor interfaces
- * we have a radiotap header too.
- */
-struct ieee80211_tx_status_rtap_hdr {
- struct ieee80211_radiotap_header hdr;
- u8 rate;
- u8 padding_for_rate;
- __le16 tx_flags;
- u8 data_retries;
-} __attribute__ ((packed));
-
-
-/* must be called under mdev tx lock */
void ieee80211_configure_filter(struct ieee80211_local *local)
{
+ u64 mc;
unsigned int changed_flags;
unsigned int new_flags = 0;
if (atomic_read(&local->iff_allmultis))
new_flags |= FIF_ALLMULTI;
- if (local->monitors)
+ if (local->monitors || local->scanning)
new_flags |= FIF_BCN_PRBRESP_PROMISC;
if (local->fif_fcsfail)
if (local->fif_other_bss)
new_flags |= FIF_OTHER_BSS;
+ if (local->fif_pspoll)
+ new_flags |= FIF_PSPOLL;
+
+ spin_lock_bh(&local->filter_lock);
changed_flags = local->filter_flags ^ new_flags;
+ mc = drv_prepare_multicast(local, local->mc_count, local->mc_list);
+ spin_unlock_bh(&local->filter_lock);
+
/* be a bit nasty */
new_flags |= (1<<31);
- local->ops->configure_filter(local_to_hw(local),
- changed_flags, &new_flags,
- local->mdev->mc_count,
- local->mdev->mc_list);
+ drv_configure_filter(local, changed_flags, &new_flags, mc);
WARN_ON(new_flags & (1<<31));
local->filter_flags = new_flags & ~(1<<31);
}
-/* master interface */
-
-static int header_parse_80211(const struct sk_buff *skb, unsigned char *haddr)
+static void ieee80211_reconfig_filter(struct work_struct *work)
{
- memcpy(haddr, skb_mac_header(skb) + 10, ETH_ALEN); /* addr2 */
- return ETH_ALEN;
-}
-
-static const struct header_ops ieee80211_header_ops = {
- .create = eth_header,
- .parse = header_parse_80211,
- .rebuild = eth_rebuild_header,
- .cache = eth_header_cache,
- .cache_update = eth_header_cache_update,
-};
-
-static int ieee80211_master_open(struct net_device *dev)
-{
- struct ieee80211_master_priv *mpriv = netdev_priv(dev);
- struct ieee80211_local *local = mpriv->local;
- struct ieee80211_sub_if_data *sdata;
- int res = -EOPNOTSUPP;
-
- /* we hold the RTNL here so can safely walk the list */
- list_for_each_entry(sdata, &local->interfaces, list) {
- if (netif_running(sdata->dev)) {
- res = 0;
- break;
- }
- }
-
- if (res)
- return res;
-
- netif_tx_start_all_queues(local->mdev);
-
- return 0;
-}
-
-static int ieee80211_master_stop(struct net_device *dev)
-{
- struct ieee80211_master_priv *mpriv = netdev_priv(dev);
- struct ieee80211_local *local = mpriv->local;
- struct ieee80211_sub_if_data *sdata;
-
- /* we hold the RTNL here so can safely walk the list */
- list_for_each_entry(sdata, &local->interfaces, list)
- if (netif_running(sdata->dev))
- dev_close(sdata->dev);
-
- return 0;
-}
-
-static void ieee80211_master_set_multicast_list(struct net_device *dev)
-{
- struct ieee80211_master_priv *mpriv = netdev_priv(dev);
- struct ieee80211_local *local = mpriv->local;
+ struct ieee80211_local *local =
+ container_of(work, struct ieee80211_local, reconfig_filter);
ieee80211_configure_filter(local);
}
-/* everything else */
-
-int ieee80211_if_config(struct ieee80211_sub_if_data *sdata, u32 changed)
-{
- struct ieee80211_local *local = sdata->local;
- struct ieee80211_if_conf conf;
-
- if (WARN_ON(!netif_running(sdata->dev)))
- return 0;
-
- memset(&conf, 0, sizeof(conf));
-
- if (sdata->vif.type == NL80211_IFTYPE_STATION)
- conf.bssid = sdata->u.mgd.bssid;
- else if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
- conf.bssid = sdata->u.ibss.bssid;
- else if (sdata->vif.type == NL80211_IFTYPE_AP)
- conf.bssid = sdata->dev->dev_addr;
- else if (ieee80211_vif_is_mesh(&sdata->vif)) {
- static const u8 zero[ETH_ALEN] = { 0 };
- conf.bssid = zero;
- } else {
- WARN_ON(1);
- return -EINVAL;
- }
-
- if (!local->ops->config_interface)
- return 0;
-
- switch (sdata->vif.type) {
- case NL80211_IFTYPE_AP:
- case NL80211_IFTYPE_ADHOC:
- case NL80211_IFTYPE_MESH_POINT:
- break;
- default:
- /* do not warn to simplify caller in scan.c */
- changed &= ~IEEE80211_IFCC_BEACON_ENABLED;
- if (WARN_ON(changed & IEEE80211_IFCC_BEACON))
- return -EINVAL;
- changed &= ~IEEE80211_IFCC_BEACON;
- break;
- }
-
- if (changed & IEEE80211_IFCC_BEACON_ENABLED) {
- if (local->sw_scanning) {
- conf.enable_beacon = false;
- } else {
- /*
- * Beacon should be enabled, but AP mode must
- * check whether there is a beacon configured.
- */
- switch (sdata->vif.type) {
- case NL80211_IFTYPE_AP:
- conf.enable_beacon =
- !!rcu_dereference(sdata->u.ap.beacon);
- break;
- case NL80211_IFTYPE_ADHOC:
- conf.enable_beacon = !!sdata->u.ibss.probe_resp;
- break;
- case NL80211_IFTYPE_MESH_POINT:
- conf.enable_beacon = true;
- break;
- default:
- /* not reached */
- WARN_ON(1);
- break;
- }
- }
- }
-
- conf.changed = changed;
-
- return local->ops->config_interface(local_to_hw(local),
- &sdata->vif, &conf);
-}
-
int ieee80211_hw_config(struct ieee80211_local *local, u32 changed)
{
- struct ieee80211_channel *chan;
+ struct ieee80211_channel *chan, *scan_chan;
int ret = 0;
int power;
enum nl80211_channel_type channel_type;
might_sleep();
- if (local->sw_scanning) {
- chan = local->scan_channel;
+ scan_chan = local->scan_channel;
+
+ if (scan_chan) {
+ chan = scan_chan;
channel_type = NL80211_CHAN_NO_HT;
} else {
chan = local->oper_channel;
changed |= IEEE80211_CONF_CHANGE_CHANNEL;
}
- if (local->sw_scanning)
+ if (scan_chan)
power = chan->max_power;
else
power = local->power_constr_level ?
(chan->max_power - local->power_constr_level) :
chan->max_power;
- if (local->user_power_level)
+ if (local->user_power_level >= 0)
power = min(power, local->user_power_level);
if (local->hw.conf.power_level != power) {
}
if (changed && local->open_count) {
- ret = local->ops->config(local_to_hw(local), changed);
+ ret = drv_config(local, changed);
/*
* Goal:
* HW reconfiguration should never fail, the driver has told
u32 changed)
{
struct ieee80211_local *local = sdata->local;
+ static const u8 zero[ETH_ALEN] = { 0 };
- if (WARN_ON(sdata->vif.type == NL80211_IFTYPE_AP_VLAN))
+ if (!changed)
return;
- if (!changed)
+ if (sdata->vif.type == NL80211_IFTYPE_STATION) {
+ /*
+ * While not associated, claim a BSSID of all-zeroes
+ * so that drivers don't do any weird things with the
+ * BSSID at that time.
+ */
+ if (sdata->vif.bss_conf.assoc)
+ sdata->vif.bss_conf.bssid = sdata->u.mgd.bssid;
+ else
+ sdata->vif.bss_conf.bssid = zero;
+ } else if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
+ sdata->vif.bss_conf.bssid = sdata->u.ibss.bssid;
+ else if (sdata->vif.type == NL80211_IFTYPE_AP)
+ sdata->vif.bss_conf.bssid = sdata->dev->dev_addr;
+ else if (ieee80211_vif_is_mesh(&sdata->vif)) {
+ sdata->vif.bss_conf.bssid = zero;
+ } else {
+ WARN_ON(1);
return;
+ }
+
+ switch (sdata->vif.type) {
+ case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_ADHOC:
+ case NL80211_IFTYPE_MESH_POINT:
+ break;
+ default:
+ /* do not warn to simplify caller in scan.c */
+ changed &= ~BSS_CHANGED_BEACON_ENABLED;
+ if (WARN_ON(changed & BSS_CHANGED_BEACON))
+ return;
+ break;
+ }
+
+ if (changed & BSS_CHANGED_BEACON_ENABLED) {
+ if (local->quiescing || !netif_running(sdata->dev) ||
+ test_bit(SCAN_SW_SCANNING, &local->scanning)) {
+ sdata->vif.bss_conf.enable_beacon = false;
+ } else {
+ /*
+ * Beacon should be enabled, but AP mode must
+ * check whether there is a beacon configured.
+ */
+ switch (sdata->vif.type) {
+ case NL80211_IFTYPE_AP:
+ sdata->vif.bss_conf.enable_beacon =
+ !!rcu_dereference(sdata->u.ap.beacon);
+ break;
+ case NL80211_IFTYPE_ADHOC:
+ sdata->vif.bss_conf.enable_beacon =
+ !!rcu_dereference(sdata->u.ibss.presp);
+ break;
+ case NL80211_IFTYPE_MESH_POINT:
+ sdata->vif.bss_conf.enable_beacon = true;
+ break;
+ default:
+ /* not reached */
+ WARN_ON(1);
+ break;
+ }
+ }
+ }
- if (local->ops->bss_info_changed)
- local->ops->bss_info_changed(local_to_hw(local),
- &sdata->vif,
- &sdata->vif.bss_conf,
- changed);
+ drv_bss_info_changed(local, &sdata->vif,
+ &sdata->vif.bss_conf, changed);
}
u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata)
BSS_CHANGED_ERP_SLOT;
}
-void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw,
- struct sk_buff *skb)
-{
- struct ieee80211_local *local = hw_to_local(hw);
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
- int tmp;
-
- skb->dev = local->mdev;
- skb->pkt_type = IEEE80211_TX_STATUS_MSG;
- skb_queue_tail(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS ?
- &local->skb_queue : &local->skb_queue_unreliable, skb);
- tmp = skb_queue_len(&local->skb_queue) +
- skb_queue_len(&local->skb_queue_unreliable);
- while (tmp > IEEE80211_IRQSAFE_QUEUE_LIMIT &&
- (skb = skb_dequeue(&local->skb_queue_unreliable))) {
- dev_kfree_skb_irq(skb);
- tmp--;
- I802_DEBUG_INC(local->tx_status_drop);
- }
- tasklet_schedule(&local->tasklet);
-}
-EXPORT_SYMBOL(ieee80211_tx_status_irqsafe);
-
static void ieee80211_tasklet_handler(unsigned long data)
{
struct ieee80211_local *local = (struct ieee80211_local *) data;
struct sk_buff *skb;
- struct ieee80211_rx_status rx_status;
struct ieee80211_ra_tid *ra_tid;
while ((skb = skb_dequeue(&local->skb_queue)) ||
(skb = skb_dequeue(&local->skb_queue_unreliable))) {
switch (skb->pkt_type) {
case IEEE80211_RX_MSG:
- /* status is in skb->cb */
- memcpy(&rx_status, skb->cb, sizeof(rx_status));
/* Clear skb->pkt_type in order to not confuse kernel
* netstack. */
skb->pkt_type = 0;
- __ieee80211_rx(local_to_hw(local), skb, &rx_status);
+ ieee80211_rx(local_to_hw(local), skb);
break;
case IEEE80211_TX_STATUS_MSG:
skb->pkt_type = 0;
break;
case IEEE80211_DELBA_MSG:
ra_tid = (struct ieee80211_ra_tid *) &skb->cb;
- ieee80211_stop_tx_ba_cb(local_to_hw(local),
- ra_tid->ra, ra_tid->tid);
+ ieee80211_stop_tx_ba_cb(ra_tid->vif, ra_tid->ra,
+ ra_tid->tid);
dev_kfree_skb(skb);
break;
case IEEE80211_ADDBA_MSG:
ra_tid = (struct ieee80211_ra_tid *) &skb->cb;
- ieee80211_start_tx_ba_cb(local_to_hw(local),
- ra_tid->ra, ra_tid->tid);
+ ieee80211_start_tx_ba_cb(ra_tid->vif, ra_tid->ra,
+ ra_tid->tid);
dev_kfree_skb(skb);
break ;
default:
}
}
-/* Remove added headers (e.g., QoS control), encryption header/MIC, etc. to
- * make a prepared TX frame (one that has been given to hw) to look like brand
- * new IEEE 802.11 frame that is ready to go through TX processing again.
- */
-static void ieee80211_remove_tx_extra(struct ieee80211_local *local,
- struct ieee80211_key *key,
- struct sk_buff *skb)
+static void ieee80211_restart_work(struct work_struct *work)
{
- unsigned int hdrlen, iv_len, mic_len;
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
-
- hdrlen = ieee80211_hdrlen(hdr->frame_control);
-
- if (!key)
- goto no_key;
+ struct ieee80211_local *local =
+ container_of(work, struct ieee80211_local, restart_work);
- switch (key->conf.alg) {
- case ALG_WEP:
- iv_len = WEP_IV_LEN;
- mic_len = WEP_ICV_LEN;
- break;
- case ALG_TKIP:
- iv_len = TKIP_IV_LEN;
- mic_len = TKIP_ICV_LEN;
- break;
- case ALG_CCMP:
- iv_len = CCMP_HDR_LEN;
- mic_len = CCMP_MIC_LEN;
- break;
- default:
- goto no_key;
- }
-
- if (skb->len >= hdrlen + mic_len &&
- !(key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE))
- skb_trim(skb, skb->len - mic_len);
- if (skb->len >= hdrlen + iv_len) {
- memmove(skb->data + iv_len, skb->data, hdrlen);
- hdr = (struct ieee80211_hdr *)skb_pull(skb, iv_len);
- }
-
-no_key:
- if (ieee80211_is_data_qos(hdr->frame_control)) {
- hdr->frame_control &= ~cpu_to_le16(IEEE80211_STYPE_QOS_DATA);
- memmove(skb->data + IEEE80211_QOS_CTL_LEN, skb->data,
- hdrlen - IEEE80211_QOS_CTL_LEN);
- skb_pull(skb, IEEE80211_QOS_CTL_LEN);
- }
-}
-
-static void ieee80211_handle_filtered_frame(struct ieee80211_local *local,
- struct sta_info *sta,
- struct sk_buff *skb)
-{
- sta->tx_filtered_count++;
-
- /*
- * Clear the TX filter mask for this STA when sending the next
- * packet. If the STA went to power save mode, this will happen
- * when it wakes up for the next time.
- */
- set_sta_flags(sta, WLAN_STA_CLEAR_PS_FILT);
-
- /*
- * This code races in the following way:
- *
- * (1) STA sends frame indicating it will go to sleep and does so
- * (2) hardware/firmware adds STA to filter list, passes frame up
- * (3) hardware/firmware processes TX fifo and suppresses a frame
- * (4) we get TX status before having processed the frame and
- * knowing that the STA has gone to sleep.
- *
- * This is actually quite unlikely even when both those events are
- * processed from interrupts coming in quickly after one another or
- * even at the same time because we queue both TX status events and
- * RX frames to be processed by a tasklet and process them in the
- * same order that they were received or TX status last. Hence, there
- * is no race as long as the frame RX is processed before the next TX
- * status, which drivers can ensure, see below.
- *
- * Note that this can only happen if the hardware or firmware can
- * actually add STAs to the filter list, if this is done by the
- * driver in response to set_tim() (which will only reduce the race
- * this whole filtering tries to solve, not completely solve it)
- * this situation cannot happen.
- *
- * To completely solve this race drivers need to make sure that they
- * (a) don't mix the irq-safe/not irq-safe TX status/RX processing
- * functions and
- * (b) always process RX events before TX status events if ordering
- * can be unknown, for example with different interrupt status
- * bits.
- */
- if (test_sta_flags(sta, WLAN_STA_PS) &&
- skb_queue_len(&sta->tx_filtered) < STA_MAX_TX_BUFFER) {
- ieee80211_remove_tx_extra(local, sta->key, skb);
- skb_queue_tail(&sta->tx_filtered, skb);
- return;
- }
-
- if (!test_sta_flags(sta, WLAN_STA_PS) && !skb->requeue) {
- /* Software retry the packet once */
- skb->requeue = 1;
- ieee80211_remove_tx_extra(local, sta->key, skb);
- dev_queue_xmit(skb);
- return;
- }
-
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
- if (net_ratelimit())
- printk(KERN_DEBUG "%s: dropped TX filtered frame, "
- "queue_len=%d PS=%d @%lu\n",
- wiphy_name(local->hw.wiphy),
- skb_queue_len(&sta->tx_filtered),
- !!test_sta_flags(sta, WLAN_STA_PS), jiffies);
-#endif
- dev_kfree_skb(skb);
+ rtnl_lock();
+ ieee80211_reconfig(local);
+ rtnl_unlock();
}
-void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb)
+void ieee80211_restart_hw(struct ieee80211_hw *hw)
{
- struct sk_buff *skb2;
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
struct ieee80211_local *local = hw_to_local(hw);
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
- u16 frag, type;
- __le16 fc;
- struct ieee80211_supported_band *sband;
- struct ieee80211_tx_status_rtap_hdr *rthdr;
- struct ieee80211_sub_if_data *sdata;
- struct net_device *prev_dev = NULL;
- struct sta_info *sta;
- int retry_count = -1, i;
-
- for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
- /* the HW cannot have attempted that rate */
- if (i >= hw->max_rates) {
- info->status.rates[i].idx = -1;
- info->status.rates[i].count = 0;
- }
-
- retry_count += info->status.rates[i].count;
- }
- if (retry_count < 0)
- retry_count = 0;
-
- rcu_read_lock();
-
- sband = local->hw.wiphy->bands[info->band];
-
- sta = sta_info_get(local, hdr->addr1);
-
- if (sta) {
- if (!(info->flags & IEEE80211_TX_STAT_ACK) &&
- test_sta_flags(sta, WLAN_STA_PS)) {
- /*
- * The STA is in power save mode, so assume
- * that this TX packet failed because of that.
- */
- ieee80211_handle_filtered_frame(local, sta, skb);
- rcu_read_unlock();
- return;
- }
-
- fc = hdr->frame_control;
-
- if ((info->flags & IEEE80211_TX_STAT_AMPDU_NO_BACK) &&
- (ieee80211_is_data_qos(fc))) {
- u16 tid, ssn;
- u8 *qc;
-
- qc = ieee80211_get_qos_ctl(hdr);
- tid = qc[0] & 0xf;
- ssn = ((le16_to_cpu(hdr->seq_ctrl) + 0x10)
- & IEEE80211_SCTL_SEQ);
- ieee80211_send_bar(sta->sdata, hdr->addr1,
- tid, ssn);
- }
-
- if (info->flags & IEEE80211_TX_STAT_TX_FILTERED) {
- ieee80211_handle_filtered_frame(local, sta, skb);
- rcu_read_unlock();
- return;
- } else {
- if (!(info->flags & IEEE80211_TX_STAT_ACK))
- sta->tx_retry_failed++;
- sta->tx_retry_count += retry_count;
- }
-
- rate_control_tx_status(local, sband, sta, skb);
- }
-
- rcu_read_unlock();
-
- ieee80211_led_tx(local, 0);
-
- /* SNMP counters
- * Fragments are passed to low-level drivers as separate skbs, so these
- * are actually fragments, not frames. Update frame counters only for
- * the first fragment of the frame. */
-
- frag = le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG;
- type = le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_FTYPE;
-
- if (info->flags & IEEE80211_TX_STAT_ACK) {
- if (frag == 0) {
- local->dot11TransmittedFrameCount++;
- if (is_multicast_ether_addr(hdr->addr1))
- local->dot11MulticastTransmittedFrameCount++;
- if (retry_count > 0)
- local->dot11RetryCount++;
- if (retry_count > 1)
- local->dot11MultipleRetryCount++;
- }
-
- /* This counter shall be incremented for an acknowledged MPDU
- * with an individual address in the address 1 field or an MPDU
- * with a multicast address in the address 1 field of type Data
- * or Management. */
- if (!is_multicast_ether_addr(hdr->addr1) ||
- type == IEEE80211_FTYPE_DATA ||
- type == IEEE80211_FTYPE_MGMT)
- local->dot11TransmittedFragmentCount++;
- } else {
- if (frag == 0)
- local->dot11FailedCount++;
- }
-
- /* this was a transmitted frame, but now we want to reuse it */
- skb_orphan(skb);
-
- /*
- * This is a bit racy but we can avoid a lot of work
- * with this test...
- */
- if (!local->monitors && !local->cooked_mntrs) {
- dev_kfree_skb(skb);
- return;
- }
-
- /* send frame to monitor interfaces now */
-
- if (skb_headroom(skb) < sizeof(*rthdr)) {
- printk(KERN_ERR "ieee80211_tx_status: headroom too small\n");
- dev_kfree_skb(skb);
- return;
- }
-
- rthdr = (struct ieee80211_tx_status_rtap_hdr *)
- skb_push(skb, sizeof(*rthdr));
-
- memset(rthdr, 0, sizeof(*rthdr));
- rthdr->hdr.it_len = cpu_to_le16(sizeof(*rthdr));
- rthdr->hdr.it_present =
- cpu_to_le32((1 << IEEE80211_RADIOTAP_TX_FLAGS) |
- (1 << IEEE80211_RADIOTAP_DATA_RETRIES) |
- (1 << IEEE80211_RADIOTAP_RATE));
- if (!(info->flags & IEEE80211_TX_STAT_ACK) &&
- !is_multicast_ether_addr(hdr->addr1))
- rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_FAIL);
-
- /*
- * XXX: Once radiotap gets the bitmap reset thing the vendor
- * extensions proposal contains, we can actually report
- * the whole set of tries we did.
- */
- if ((info->status.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) ||
- (info->status.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT))
- rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_CTS);
- else if (info->status.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS)
- rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_RTS);
- if (info->status.rates[0].idx >= 0 &&
- !(info->status.rates[0].flags & IEEE80211_TX_RC_MCS))
- rthdr->rate = sband->bitrates[
- info->status.rates[0].idx].bitrate / 5;
-
- /* for now report the total retry_count */
- rthdr->data_retries = retry_count;
-
- /* XXX: is this sufficient for BPF? */
- skb_set_mac_header(skb, 0);
- skb->ip_summed = CHECKSUM_UNNECESSARY;
- skb->pkt_type = PACKET_OTHERHOST;
- skb->protocol = htons(ETH_P_802_2);
- memset(skb->cb, 0, sizeof(skb->cb));
-
- rcu_read_lock();
- list_for_each_entry_rcu(sdata, &local->interfaces, list) {
- if (sdata->vif.type == NL80211_IFTYPE_MONITOR) {
- if (!netif_running(sdata->dev))
- continue;
-
- if (prev_dev) {
- skb2 = skb_clone(skb, GFP_ATOMIC);
- if (skb2) {
- skb2->dev = prev_dev;
- netif_rx(skb2);
- }
- }
+ /* use this reason, __ieee80211_resume will unblock it */
+ ieee80211_stop_queues_by_reason(hw,
+ IEEE80211_QUEUE_STOP_REASON_SUSPEND);
- prev_dev = sdata->dev;
- }
- }
- if (prev_dev) {
- skb->dev = prev_dev;
- netif_rx(skb);
- skb = NULL;
- }
- rcu_read_unlock();
- dev_kfree_skb(skb);
+ schedule_work(&local->restart_work);
}
-EXPORT_SYMBOL(ieee80211_tx_status);
+EXPORT_SYMBOL(ieee80211_restart_hw);
struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
const struct ieee80211_ops *ops)
* +-------------------------+
*
*/
- priv_size = ((sizeof(struct ieee80211_local) +
- NETDEV_ALIGN_CONST) & ~NETDEV_ALIGN_CONST) +
- priv_data_len;
+ priv_size = ALIGN(sizeof(*local), NETDEV_ALIGN) + priv_data_len;
wiphy = wiphy_new(&mac80211_config_ops, priv_size);
if (!wiphy)
return NULL;
+ wiphy->flags |= WIPHY_FLAG_NETNS_OK |
+ WIPHY_FLAG_4ADDR_AP |
+ WIPHY_FLAG_4ADDR_STATION;
wiphy->privid = mac80211_wiphy_privid;
- wiphy->max_scan_ssids = 4;
+
/* Yes, putting cfg80211_bss into ieee80211_bss is a hack */
wiphy->bss_priv_size = sizeof(struct ieee80211_bss) -
sizeof(struct cfg80211_bss);
local = wiphy_priv(wiphy);
+
local->hw.wiphy = wiphy;
- local->hw.priv = (char *)local +
- ((sizeof(struct ieee80211_local) +
- NETDEV_ALIGN_CONST) & ~NETDEV_ALIGN_CONST);
+ local->hw.priv = (char *)local + ALIGN(sizeof(*local), NETDEV_ALIGN);
BUG_ON(!ops->tx);
BUG_ON(!ops->start);
/* set up some defaults */
local->hw.queues = 1;
local->hw.max_rates = 1;
- local->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD;
- local->fragmentation_threshold = IEEE80211_MAX_FRAG_THRESHOLD;
- local->hw.conf.long_frame_max_tx_count = 4;
- local->hw.conf.short_frame_max_tx_count = 7;
- local->hw.conf.radio_enabled = true;
+ local->hw.conf.long_frame_max_tx_count = wiphy->retry_long;
+ local->hw.conf.short_frame_max_tx_count = wiphy->retry_short;
+ local->user_power_level = -1;
INIT_LIST_HEAD(&local->interfaces);
mutex_init(&local->iflist_mtx);
+ mutex_init(&local->scan_mtx);
spin_lock_init(&local->key_lock);
-
+ spin_lock_init(&local->filter_lock);
spin_lock_init(&local->queue_stop_reason_lock);
INIT_DELAYED_WORK(&local->scan_work, ieee80211_scan_work);
+ INIT_WORK(&local->restart_work, ieee80211_restart_work);
+
+ INIT_WORK(&local->reconfig_filter, ieee80211_reconfig_filter);
+
INIT_WORK(&local->dynamic_ps_enable_work,
ieee80211_dynamic_ps_enable_work);
INIT_WORK(&local->dynamic_ps_disable_work,
setup_timer(&local->dynamic_ps_timer,
ieee80211_dynamic_ps_timer, (unsigned long) local);
- for (i = 0; i < IEEE80211_MAX_AMPDU_QUEUES; i++)
- local->ampdu_ac_queue[i] = -1;
- /* using an s8 won't work with more than that */
- BUILD_BUG_ON(IEEE80211_MAX_AMPDU_QUEUES > 127);
-
sta_info_init(local);
for (i = 0; i < IEEE80211_MAX_QUEUES; i++)
skb_queue_head_init(&local->pending[i]);
tasklet_init(&local->tx_pending_tasklet, ieee80211_tx_pending,
(unsigned long)local);
- tasklet_disable(&local->tx_pending_tasklet);
tasklet_init(&local->tasklet,
ieee80211_tasklet_handler,
(unsigned long) local);
- tasklet_disable(&local->tasklet);
skb_queue_head_init(&local->skb_queue);
skb_queue_head_init(&local->skb_queue_unreliable);
+ spin_lock_init(&local->ampdu_lock);
+
return local_to_hw(local);
}
EXPORT_SYMBOL(ieee80211_alloc_hw);
-static const struct net_device_ops ieee80211_master_ops = {
- .ndo_start_xmit = ieee80211_master_start_xmit,
- .ndo_open = ieee80211_master_open,
- .ndo_stop = ieee80211_master_stop,
- .ndo_set_multicast_list = ieee80211_master_set_multicast_list,
- .ndo_select_queue = ieee80211_select_queue,
-};
-
-static void ieee80211_master_setup(struct net_device *mdev)
-{
- mdev->type = ARPHRD_IEEE80211;
- mdev->netdev_ops = &ieee80211_master_ops;
- mdev->header_ops = &ieee80211_header_ops;
- mdev->tx_queue_len = 1000;
- mdev->addr_len = ETH_ALEN;
-}
-
int ieee80211_register_hw(struct ieee80211_hw *hw)
{
struct ieee80211_local *local = hw_to_local(hw);
int result;
enum ieee80211_band band;
- struct net_device *mdev;
- struct ieee80211_master_priv *mpriv;
- int channels, i, j;
+ int channels, i, j, max_bitrates;
+ bool supp_ht;
+ static const u32 cipher_suites[] = {
+ WLAN_CIPHER_SUITE_WEP40,
+ WLAN_CIPHER_SUITE_WEP104,
+ WLAN_CIPHER_SUITE_TKIP,
+ WLAN_CIPHER_SUITE_CCMP,
+
+ /* keep last -- depends on hw flags! */
+ WLAN_CIPHER_SUITE_AES_CMAC
+ };
/*
* generic code guarantees at least one band,
* that hw.conf.channel is assigned
*/
channels = 0;
+ max_bitrates = 0;
+ supp_ht = false;
for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
struct ieee80211_supported_band *sband;
sband = local->hw.wiphy->bands[band];
- if (sband && !local->oper_channel) {
+ if (!sband)
+ continue;
+ if (!local->oper_channel) {
/* init channel we're on */
local->hw.conf.channel =
- local->oper_channel =
- local->scan_channel = &sband->channels[0];
+ local->oper_channel = &sband->channels[0];
+ local->hw.conf.channel_type = NL80211_CHAN_NO_HT;
}
- if (sband)
- channels += sband->n_channels;
+ channels += sband->n_channels;
+
+ if (max_bitrates < sband->n_bitrates)
+ max_bitrates = sband->n_bitrates;
+ supp_ht = supp_ht || sband->ht_cap.ht_supported;
}
- local->int_scan_req.n_channels = channels;
- local->int_scan_req.channels = kzalloc(sizeof(void *) * channels, GFP_KERNEL);
- if (!local->int_scan_req.channels)
+ local->int_scan_req = kzalloc(sizeof(*local->int_scan_req) +
+ sizeof(void *) * channels, GFP_KERNEL);
+ if (!local->int_scan_req)
return -ENOMEM;
/* if low-level driver supports AP, we also support VLAN */
else if (local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC)
local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_UNSPEC;
+ /*
+ * Calculate scan IE length -- we need this to alloc
+ * memory and to subtract from the driver limit. It
+ * includes the (extended) supported rates and HT
+ * information -- SSID is the driver's responsibility.
+ */
+ local->scan_ies_len = 4 + max_bitrates; /* (ext) supp rates */
+ if (supp_ht)
+ local->scan_ies_len += 2 + sizeof(struct ieee80211_ht_cap);
+
+ if (!local->ops->hw_scan) {
+ /* For hw_scan, driver needs to set these up. */
+ local->hw.wiphy->max_scan_ssids = 4;
+ local->hw.wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN;
+ }
+
+ /*
+ * If the driver supports any scan IEs, then assume the
+ * limit includes the IEs mac80211 will add, otherwise
+ * leave it at zero and let the driver sort it out; we
+ * still pass our IEs to the driver but userspace will
+ * not be allowed to in that case.
+ */
+ if (local->hw.wiphy->max_scan_ie_len)
+ local->hw.wiphy->max_scan_ie_len -= local->scan_ies_len;
+
+ local->hw.wiphy->cipher_suites = cipher_suites;
+ local->hw.wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
+ if (!(local->hw.flags & IEEE80211_HW_MFP_CAPABLE))
+ local->hw.wiphy->n_cipher_suites--;
+
result = wiphy_register(local->hw.wiphy);
if (result < 0)
goto fail_wiphy_register;
*/
if (hw->queues > IEEE80211_MAX_QUEUES)
hw->queues = IEEE80211_MAX_QUEUES;
- if (hw->ampdu_queues > IEEE80211_MAX_AMPDU_QUEUES)
- hw->ampdu_queues = IEEE80211_MAX_AMPDU_QUEUES;
- if (hw->queues < 4)
- hw->ampdu_queues = 0;
-
- mdev = alloc_netdev_mq(sizeof(struct ieee80211_master_priv),
- "wmaster%d", ieee80211_master_setup,
- hw->queues);
- if (!mdev)
- goto fail_mdev_alloc;
-
- mpriv = netdev_priv(mdev);
- mpriv->local = local;
- local->mdev = mdev;
-
- local->hw.workqueue =
+
+ local->workqueue =
create_singlethread_workqueue(wiphy_name(local->hw.wiphy));
- if (!local->hw.workqueue) {
+ if (!local->workqueue) {
result = -ENOMEM;
goto fail_workqueue;
}
debugfs_hw_add(local);
- if (local->hw.conf.beacon_int < 10)
- local->hw.conf.beacon_int = 100;
-
if (local->hw.max_listen_interval == 0)
local->hw.max_listen_interval = 1;
if (result < 0)
goto fail_sta_info;
- rtnl_lock();
- result = dev_alloc_name(local->mdev, local->mdev->name);
- if (result < 0)
- goto fail_dev;
-
- memcpy(local->mdev->dev_addr, local->hw.wiphy->perm_addr, ETH_ALEN);
- SET_NETDEV_DEV(local->mdev, wiphy_dev(local->hw.wiphy));
- local->mdev->features |= NETIF_F_NETNS_LOCAL;
+ result = ieee80211_wep_init(local);
+ if (result < 0) {
+ printk(KERN_DEBUG "%s: Failed to initialize wep: %d\n",
+ wiphy_name(local->hw.wiphy), result);
+ goto fail_wep;
+ }
- result = register_netdevice(local->mdev);
- if (result < 0)
- goto fail_dev;
+ rtnl_lock();
result = ieee80211_init_rate_ctrl_alg(local,
hw->rate_control_algorithm);
goto fail_rate;
}
- result = ieee80211_wep_init(local);
-
- if (result < 0) {
- printk(KERN_DEBUG "%s: Failed to initialize wep: %d\n",
- wiphy_name(local->hw.wiphy), result);
- goto fail_wep;
- }
-
/* add one default STA interface if supported */
if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_STATION)) {
result = ieee80211_if_add(local, "wlan%d", NULL,
/* alloc internal scan request */
i = 0;
- local->int_scan_req.ssids = &local->scan_ssid;
- local->int_scan_req.n_ssids = 1;
+ local->int_scan_req->ssids = &local->scan_ssid;
+ local->int_scan_req->n_ssids = 1;
for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
if (!hw->wiphy->bands[band])
continue;
for (j = 0; j < hw->wiphy->bands[band]->n_channels; j++) {
- local->int_scan_req.channels[i] =
+ local->int_scan_req->channels[i] =
&hw->wiphy->bands[band]->channels[j];
i++;
}
}
+ local->int_scan_req->n_channels = i;
+
+ local->network_latency_notifier.notifier_call =
+ ieee80211_max_network_latency;
+ result = pm_qos_add_notifier(PM_QOS_NETWORK_LATENCY,
+ &local->network_latency_notifier);
+
+ if (result) {
+ rtnl_lock();
+ goto fail_pm_qos;
+ }
return 0;
-fail_wep:
- rate_control_deinitialize(local);
-fail_rate:
- unregister_netdevice(local->mdev);
- local->mdev = NULL;
-fail_dev:
+ fail_pm_qos:
+ ieee80211_led_exit(local);
+ ieee80211_remove_interfaces(local);
+ fail_rate:
rtnl_unlock();
+ ieee80211_wep_free(local);
+ fail_wep:
sta_info_stop(local);
-fail_sta_info:
- debugfs_hw_del(local);
- destroy_workqueue(local->hw.workqueue);
-fail_workqueue:
- if (local->mdev)
- free_netdev(local->mdev);
-fail_mdev_alloc:
+ fail_sta_info:
+ destroy_workqueue(local->workqueue);
+ fail_workqueue:
wiphy_unregister(local->hw.wiphy);
-fail_wiphy_register:
- kfree(local->int_scan_req.channels);
+ fail_wiphy_register:
+ kfree(local->int_scan_req);
return result;
}
EXPORT_SYMBOL(ieee80211_register_hw);
tasklet_kill(&local->tx_pending_tasklet);
tasklet_kill(&local->tasklet);
+ pm_qos_remove_notifier(PM_QOS_NETWORK_LATENCY,
+ &local->network_latency_notifier);
+
rtnl_lock();
/*
* because the driver cannot be handing us frames any
* more and the tasklet is killed.
*/
-
- /* First, we remove all virtual interfaces. */
ieee80211_remove_interfaces(local);
- /* then, finally, remove the master interface */
- unregister_netdevice(local->mdev);
-
rtnl_unlock();
+ cancel_work_sync(&local->reconfig_filter);
+
ieee80211_clear_tx_pending(local);
sta_info_stop(local);
rate_control_deinitialize(local);
- debugfs_hw_del(local);
- if (skb_queue_len(&local->skb_queue)
- || skb_queue_len(&local->skb_queue_unreliable))
+ if (skb_queue_len(&local->skb_queue) ||
+ skb_queue_len(&local->skb_queue_unreliable))
printk(KERN_WARNING "%s: skb_queue not empty\n",
wiphy_name(local->hw.wiphy));
skb_queue_purge(&local->skb_queue);
skb_queue_purge(&local->skb_queue_unreliable);
- destroy_workqueue(local->hw.workqueue);
+ destroy_workqueue(local->workqueue);
wiphy_unregister(local->hw.wiphy);
ieee80211_wep_free(local);
ieee80211_led_exit(local);
- free_netdev(local->mdev);
- kfree(local->int_scan_req.channels);
+ kfree(local->int_scan_req);
}
EXPORT_SYMBOL(ieee80211_unregister_hw);
struct ieee80211_local *local = hw_to_local(hw);
mutex_destroy(&local->iflist_mtx);
+ mutex_destroy(&local->scan_mtx);
wiphy_free(local->hw.wiphy);
}