#include <linux/wireless.h>
#include <linux/rtnetlink.h>
#include <linux/bitmap.h>
+#include <linux/pm_qos_params.h>
#include <net/net_namespace.h>
#include <net/cfg80211.h>
#include "ieee80211_i.h"
+#include "driver-ops.h"
#include "rate.h"
#include "mesh.h"
#include "wep.h"
*/
struct ieee80211_tx_status_rtap_hdr {
struct ieee80211_radiotap_header hdr;
+ u8 rate;
+ u8 padding_for_rate;
__le16 tx_flags;
u8 data_retries;
} __attribute__ ((packed));
-/* common interface routines */
-
-static int header_parse_80211(const struct sk_buff *skb, unsigned char *haddr)
-{
- memcpy(haddr, skb_mac_header(skb) + 10, ETH_ALEN); /* addr2 */
- return ETH_ALEN;
-}
/* must be called under mdev tx lock */
-static void ieee80211_configure_filter(struct ieee80211_local *local)
+void ieee80211_configure_filter(struct ieee80211_local *local)
{
unsigned int changed_flags;
unsigned int new_flags = 0;
/* be a bit nasty */
new_flags |= (1<<31);
- local->ops->configure_filter(local_to_hw(local),
- changed_flags, &new_flags,
- local->mdev->mc_count,
- local->mdev->mc_list);
+ drv_configure_filter(local, changed_flags, &new_flags,
+ local->mdev->mc_count,
+ local->mdev->mc_list);
WARN_ON(new_flags & (1<<31));
/* master interface */
+static int header_parse_80211(const struct sk_buff *skb, unsigned char *haddr)
+{
+ memcpy(haddr, skb_mac_header(skb) + 10, ETH_ALEN); /* addr2 */
+ return ETH_ALEN;
+}
+
+static const struct header_ops ieee80211_header_ops = {
+ .create = eth_header,
+ .parse = header_parse_80211,
+ .rebuild = eth_rebuild_header,
+ .cache = eth_header_cache,
+ .cache_update = eth_header_cache_update,
+};
+
static int ieee80211_master_open(struct net_device *dev)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_master_priv *mpriv = netdev_priv(dev);
+ struct ieee80211_local *local = mpriv->local;
struct ieee80211_sub_if_data *sdata;
int res = -EOPNOTSUPP;
static int ieee80211_master_stop(struct net_device *dev)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_master_priv *mpriv = netdev_priv(dev);
+ struct ieee80211_local *local = mpriv->local;
struct ieee80211_sub_if_data *sdata;
/* we hold the RTNL here so can safely walk the list */
static void ieee80211_master_set_multicast_list(struct net_device *dev)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_master_priv *mpriv = netdev_priv(dev);
+ struct ieee80211_local *local = mpriv->local;
ieee80211_configure_filter(local);
}
-/* regular interfaces */
-
-static int ieee80211_change_mtu(struct net_device *dev, int new_mtu)
-{
- int meshhdrlen;
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-
- meshhdrlen = (sdata->vif.type == IEEE80211_IF_TYPE_MESH_POINT) ? 5 : 0;
-
- /* FIX: what would be proper limits for MTU?
- * This interface uses 802.3 frames. */
- if (new_mtu < 256 ||
- new_mtu > IEEE80211_MAX_DATA_LEN - 24 - 6 - meshhdrlen) {
- return -EINVAL;
- }
-
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
- printk(KERN_DEBUG "%s: setting MTU %d\n", dev->name, new_mtu);
-#endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
- dev->mtu = new_mtu;
- return 0;
-}
-
-static inline int identical_mac_addr_allowed(int type1, int type2)
+int ieee80211_hw_config(struct ieee80211_local *local, u32 changed)
{
- return (type1 == IEEE80211_IF_TYPE_MNTR ||
- type2 == IEEE80211_IF_TYPE_MNTR ||
- (type1 == IEEE80211_IF_TYPE_AP &&
- type2 == IEEE80211_IF_TYPE_WDS) ||
- (type1 == IEEE80211_IF_TYPE_WDS &&
- (type2 == IEEE80211_IF_TYPE_WDS ||
- type2 == IEEE80211_IF_TYPE_AP)) ||
- (type1 == IEEE80211_IF_TYPE_AP &&
- type2 == IEEE80211_IF_TYPE_VLAN) ||
- (type1 == IEEE80211_IF_TYPE_VLAN &&
- (type2 == IEEE80211_IF_TYPE_AP ||
- type2 == IEEE80211_IF_TYPE_VLAN)));
-}
-
-static int ieee80211_open(struct net_device *dev)
-{
- struct ieee80211_sub_if_data *sdata, *nsdata;
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
- struct sta_info *sta;
- struct ieee80211_if_init_conf conf;
- u32 changed = 0;
- int res;
- bool need_hw_reconfig = 0;
-
- sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-
- /* we hold the RTNL here so can safely walk the list */
- list_for_each_entry(nsdata, &local->interfaces, list) {
- struct net_device *ndev = nsdata->dev;
-
- if (ndev != dev && netif_running(ndev)) {
- /*
- * Allow only a single IBSS interface to be up at any
- * time. This is restricted because beacon distribution
- * cannot work properly if both are in the same IBSS.
- *
- * To remove this restriction we'd have to disallow them
- * from setting the same SSID on different IBSS interfaces
- * belonging to the same hardware. Then, however, we're
- * faced with having to adopt two different TSF timers...
- */
- if (sdata->vif.type == IEEE80211_IF_TYPE_IBSS &&
- nsdata->vif.type == IEEE80211_IF_TYPE_IBSS)
- return -EBUSY;
-
- /*
- * The remaining checks are only performed for interfaces
- * with the same MAC address.
- */
- if (compare_ether_addr(dev->dev_addr, ndev->dev_addr))
- continue;
-
- /*
- * check whether it may have the same address
- */
- if (!identical_mac_addr_allowed(sdata->vif.type,
- nsdata->vif.type))
- return -ENOTUNIQ;
-
- /*
- * can only add VLANs to enabled APs
- */
- if (sdata->vif.type == IEEE80211_IF_TYPE_VLAN &&
- nsdata->vif.type == IEEE80211_IF_TYPE_AP)
- sdata->bss = &nsdata->u.ap;
- }
- }
-
- switch (sdata->vif.type) {
- case IEEE80211_IF_TYPE_WDS:
- if (!is_valid_ether_addr(sdata->u.wds.remote_addr))
- return -ENOLINK;
- break;
- case IEEE80211_IF_TYPE_VLAN:
- if (!sdata->bss)
- return -ENOLINK;
- list_add(&sdata->u.vlan.list, &sdata->bss->vlans);
- break;
- case IEEE80211_IF_TYPE_AP:
- sdata->bss = &sdata->u.ap;
- break;
- case IEEE80211_IF_TYPE_STA:
- case IEEE80211_IF_TYPE_MNTR:
- case IEEE80211_IF_TYPE_IBSS:
- case IEEE80211_IF_TYPE_MESH_POINT:
- /* no special treatment */
- break;
- case IEEE80211_IF_TYPE_INVALID:
- /* cannot happen */
- WARN_ON(1);
- break;
- }
-
- if (local->open_count == 0) {
- res = 0;
- if (local->ops->start)
- res = local->ops->start(local_to_hw(local));
- if (res)
- goto err_del_bss;
- need_hw_reconfig = 1;
- ieee80211_led_radio(local, local->hw.conf.radio_enabled);
- }
-
- switch (sdata->vif.type) {
- case IEEE80211_IF_TYPE_VLAN:
- /* no need to tell driver */
- break;
- case IEEE80211_IF_TYPE_MNTR:
- if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) {
- local->cooked_mntrs++;
- break;
- }
-
- /* must be before the call to ieee80211_configure_filter */
- local->monitors++;
- if (local->monitors == 1)
- local->hw.conf.flags |= IEEE80211_CONF_RADIOTAP;
-
- if (sdata->u.mntr_flags & MONITOR_FLAG_FCSFAIL)
- local->fif_fcsfail++;
- if (sdata->u.mntr_flags & MONITOR_FLAG_PLCPFAIL)
- local->fif_plcpfail++;
- if (sdata->u.mntr_flags & MONITOR_FLAG_CONTROL)
- local->fif_control++;
- if (sdata->u.mntr_flags & MONITOR_FLAG_OTHER_BSS)
- local->fif_other_bss++;
-
- netif_addr_lock_bh(local->mdev);
- ieee80211_configure_filter(local);
- netif_addr_unlock_bh(local->mdev);
- break;
- case IEEE80211_IF_TYPE_STA:
- case IEEE80211_IF_TYPE_IBSS:
- sdata->u.sta.flags &= ~IEEE80211_STA_PREV_BSSID_SET;
- /* fall through */
- default:
- conf.vif = &sdata->vif;
- conf.type = sdata->vif.type;
- conf.mac_addr = dev->dev_addr;
- res = local->ops->add_interface(local_to_hw(local), &conf);
- if (res)
- goto err_stop;
-
- if (ieee80211_vif_is_mesh(&sdata->vif))
- ieee80211_start_mesh(sdata->dev);
- changed |= ieee80211_reset_erp_info(dev);
- ieee80211_bss_info_change_notify(sdata, changed);
- ieee80211_enable_keys(sdata);
-
- if (sdata->vif.type == IEEE80211_IF_TYPE_STA &&
- !(sdata->flags & IEEE80211_SDATA_USERSPACE_MLME))
- netif_carrier_off(dev);
- else
- netif_carrier_on(dev);
- }
-
- if (sdata->vif.type == IEEE80211_IF_TYPE_WDS) {
- /* Create STA entry for the WDS peer */
- sta = sta_info_alloc(sdata, sdata->u.wds.remote_addr,
- GFP_KERNEL);
- if (!sta) {
- res = -ENOMEM;
- goto err_del_interface;
- }
-
- /* no locking required since STA is not live yet */
- sta->flags |= WLAN_STA_AUTHORIZED;
-
- res = sta_info_insert(sta);
- if (res) {
- /* STA has been freed */
- goto err_del_interface;
- }
- }
-
- if (local->open_count == 0) {
- res = dev_open(local->mdev);
- WARN_ON(res);
- if (res)
- goto err_del_interface;
- tasklet_enable(&local->tx_pending_tasklet);
- tasklet_enable(&local->tasklet);
- }
-
- /*
- * set_multicast_list will be invoked by the networking core
- * which will check whether any increments here were done in
- * error and sync them down to the hardware as filter flags.
- */
- if (sdata->flags & IEEE80211_SDATA_ALLMULTI)
- atomic_inc(&local->iff_allmultis);
+ struct ieee80211_channel *chan, *scan_chan;
+ int ret = 0;
+ int power;
+ enum nl80211_channel_type channel_type;
- if (sdata->flags & IEEE80211_SDATA_PROMISC)
- atomic_inc(&local->iff_promiscs);
+ might_sleep();
- local->open_count++;
- if (need_hw_reconfig)
- ieee80211_hw_config(local);
+ scan_chan = local->scan_channel;
- /*
- * ieee80211_sta_work is disabled while network interface
- * is down. Therefore, some configuration changes may not
- * yet be effective. Trigger execution of ieee80211_sta_work
- * to fix this.
- */
- if (sdata->vif.type == IEEE80211_IF_TYPE_STA ||
- sdata->vif.type == IEEE80211_IF_TYPE_IBSS) {
- struct ieee80211_if_sta *ifsta = &sdata->u.sta;
- queue_work(local->hw.workqueue, &ifsta->work);
+ if (scan_chan) {
+ chan = scan_chan;
+ channel_type = NL80211_CHAN_NO_HT;
+ } else {
+ chan = local->oper_channel;
+ channel_type = local->oper_channel_type;
}
- netif_tx_start_all_queues(dev);
-
- return 0;
- err_del_interface:
- local->ops->remove_interface(local_to_hw(local), &conf);
- err_stop:
- if (!local->open_count && local->ops->stop)
- local->ops->stop(local_to_hw(local));
- err_del_bss:
- sdata->bss = NULL;
- if (sdata->vif.type == IEEE80211_IF_TYPE_VLAN)
- list_del(&sdata->u.vlan.list);
- return res;
-}
-
-static int ieee80211_stop(struct net_device *dev)
-{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
- struct ieee80211_local *local = sdata->local;
- struct ieee80211_if_init_conf conf;
- struct sta_info *sta;
-
- /*
- * Stop TX on this interface first.
- */
- netif_tx_stop_all_queues(dev);
-
- /*
- * Now delete all active aggregation sessions.
- */
- rcu_read_lock();
-
- list_for_each_entry_rcu(sta, &local->sta_list, list) {
- if (sta->sdata == sdata)
- ieee80211_sta_tear_down_BA_sessions(dev, sta->addr);
+ if (chan != local->hw.conf.channel ||
+ channel_type != local->hw.conf.channel_type) {
+ local->hw.conf.channel = chan;
+ local->hw.conf.channel_type = channel_type;
+ changed |= IEEE80211_CONF_CHANGE_CHANNEL;
}
- rcu_read_unlock();
-
- /*
- * Remove all stations associated with this interface.
- *
- * This must be done before calling ops->remove_interface()
- * because otherwise we can later invoke ops->sta_notify()
- * whenever the STAs are removed, and that invalidates driver
- * assumptions about always getting a vif pointer that is valid
- * (because if we remove a STA after ops->remove_interface()
- * the driver will have removed the vif info already!)
- *
- * We could relax this and only unlink the stations from the
- * hash table and list but keep them on a per-sdata list that
- * will be inserted back again when the interface is brought
- * up again, but I don't currently see a use case for that,
- * except with WDS which gets a STA entry created when it is
- * brought up.
- */
- sta_info_flush(local, sdata);
-
- /*
- * Don't count this interface for promisc/allmulti while it
- * is down. dev_mc_unsync() will invoke set_multicast_list
- * on the master interface which will sync these down to the
- * hardware as filter flags.
- */
- if (sdata->flags & IEEE80211_SDATA_ALLMULTI)
- atomic_dec(&local->iff_allmultis);
-
- if (sdata->flags & IEEE80211_SDATA_PROMISC)
- atomic_dec(&local->iff_promiscs);
-
- dev_mc_unsync(local->mdev, dev);
-
- /* APs need special treatment */
- if (sdata->vif.type == IEEE80211_IF_TYPE_AP) {
- struct ieee80211_sub_if_data *vlan, *tmp;
- struct beacon_data *old_beacon = sdata->u.ap.beacon;
+ if (scan_chan)
+ power = chan->max_power;
+ else
+ power = local->power_constr_level ?
+ (chan->max_power - local->power_constr_level) :
+ chan->max_power;
- /* remove beacon */
- rcu_assign_pointer(sdata->u.ap.beacon, NULL);
- synchronize_rcu();
- kfree(old_beacon);
+ if (local->user_power_level >= 0)
+ power = min(power, local->user_power_level);
- /* down all dependent devices, that is VLANs */
- list_for_each_entry_safe(vlan, tmp, &sdata->u.ap.vlans,
- u.vlan.list)
- dev_close(vlan->dev);
- WARN_ON(!list_empty(&sdata->u.ap.vlans));
+ if (local->hw.conf.power_level != power) {
+ changed |= IEEE80211_CONF_CHANGE_POWER;
+ local->hw.conf.power_level = power;
}
- local->open_count--;
-
- switch (sdata->vif.type) {
- case IEEE80211_IF_TYPE_VLAN:
- list_del(&sdata->u.vlan.list);
- /* no need to tell driver */
- break;
- case IEEE80211_IF_TYPE_MNTR:
- if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) {
- local->cooked_mntrs--;
- break;
- }
-
- local->monitors--;
- if (local->monitors == 0)
- local->hw.conf.flags &= ~IEEE80211_CONF_RADIOTAP;
-
- if (sdata->u.mntr_flags & MONITOR_FLAG_FCSFAIL)
- local->fif_fcsfail--;
- if (sdata->u.mntr_flags & MONITOR_FLAG_PLCPFAIL)
- local->fif_plcpfail--;
- if (sdata->u.mntr_flags & MONITOR_FLAG_CONTROL)
- local->fif_control--;
- if (sdata->u.mntr_flags & MONITOR_FLAG_OTHER_BSS)
- local->fif_other_bss--;
-
- netif_addr_lock_bh(local->mdev);
- ieee80211_configure_filter(local);
- netif_addr_unlock_bh(local->mdev);
- break;
- case IEEE80211_IF_TYPE_MESH_POINT:
- case IEEE80211_IF_TYPE_STA:
- case IEEE80211_IF_TYPE_IBSS:
- sdata->u.sta.state = IEEE80211_DISABLED;
- memset(sdata->u.sta.bssid, 0, ETH_ALEN);
- del_timer_sync(&sdata->u.sta.timer);
+ if (changed && local->open_count) {
+ ret = drv_config(local, changed);
/*
- * When we get here, the interface is marked down.
- * Call synchronize_rcu() to wait for the RX path
- * should it be using the interface and enqueuing
- * frames at this very time on another CPU.
+ * Goal:
+ * HW reconfiguration should never fail, the driver has told
+ * us what it can support so it should live up to that promise.
+ *
+ * Current status:
+ * rfkill is not integrated with mac80211 and a
+ * configuration command can thus fail if hardware rfkill
+ * is enabled
+ *
+ * FIXME: integrate rfkill with mac80211 and then add this
+ * WARN_ON() back
+ *
*/
- synchronize_rcu();
- skb_queue_purge(&sdata->u.sta.skb_queue);
-
- if (local->scan_dev == sdata->dev) {
- if (!local->ops->hw_scan) {
- local->sta_sw_scanning = 0;
- cancel_delayed_work(&local->scan_work);
- } else
- local->sta_hw_scanning = 0;
- }
-
- sdata->u.sta.flags &= ~IEEE80211_STA_PRIVACY_INVOKED;
- kfree(sdata->u.sta.extra_ie);
- sdata->u.sta.extra_ie = NULL;
- sdata->u.sta.extra_ie_len = 0;
- /* fall through */
- default:
- conf.vif = &sdata->vif;
- conf.type = sdata->vif.type;
- conf.mac_addr = dev->dev_addr;
- /* disable all keys for as long as this netdev is down */
- ieee80211_disable_keys(sdata);
- local->ops->remove_interface(local_to_hw(local), &conf);
- }
-
- sdata->bss = NULL;
-
- if (local->open_count == 0) {
- if (netif_running(local->mdev))
- dev_close(local->mdev);
-
- if (local->ops->stop)
- local->ops->stop(local_to_hw(local));
-
- ieee80211_led_radio(local, 0);
-
- flush_workqueue(local->hw.workqueue);
-
- tasklet_disable(&local->tx_pending_tasklet);
- tasklet_disable(&local->tasklet);
- }
-
- return 0;
-}
-
-int ieee80211_start_tx_ba_session(struct ieee80211_hw *hw, u8 *ra, u16 tid)
-{
- struct ieee80211_local *local = hw_to_local(hw);
- struct sta_info *sta;
- struct ieee80211_sub_if_data *sdata;
- u16 start_seq_num = 0;
- u8 *state;
- int ret;
- DECLARE_MAC_BUF(mac);
-
- if (tid >= STA_TID_NUM)
- return -EINVAL;
-
-#ifdef CONFIG_MAC80211_HT_DEBUG
- printk(KERN_DEBUG "Open BA session requested for %s tid %u\n",
- print_mac(mac, ra), tid);
-#endif /* CONFIG_MAC80211_HT_DEBUG */
-
- rcu_read_lock();
-
- sta = sta_info_get(local, ra);
- if (!sta) {
-#ifdef CONFIG_MAC80211_HT_DEBUG
- printk(KERN_DEBUG "Could not find the station\n");
-#endif
- ret = -ENOENT;
- goto exit;
- }
-
- spin_lock_bh(&sta->lock);
-
- /* we have tried too many times, receiver does not want A-MPDU */
- if (sta->ampdu_mlme.addba_req_num[tid] > HT_AGG_MAX_RETRIES) {
- ret = -EBUSY;
- goto err_unlock_sta;
+ /* WARN_ON(ret); */
}
- state = &sta->ampdu_mlme.tid_state_tx[tid];
- /* check if the TID is not in aggregation flow already */
- if (*state != HT_AGG_STATE_IDLE) {
-#ifdef CONFIG_MAC80211_HT_DEBUG
- printk(KERN_DEBUG "BA request denied - session is not "
- "idle on tid %u\n", tid);
-#endif /* CONFIG_MAC80211_HT_DEBUG */
- ret = -EAGAIN;
- goto err_unlock_sta;
- }
-
- /* prepare A-MPDU MLME for Tx aggregation */
- sta->ampdu_mlme.tid_tx[tid] =
- kmalloc(sizeof(struct tid_ampdu_tx), GFP_ATOMIC);
- if (!sta->ampdu_mlme.tid_tx[tid]) {
-#ifdef CONFIG_MAC80211_HT_DEBUG
- if (net_ratelimit())
- printk(KERN_ERR "allocate tx mlme to tid %d failed\n",
- tid);
-#endif
- ret = -ENOMEM;
- goto err_unlock_sta;
- }
- /* Tx timer */
- sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer.function =
- sta_addba_resp_timer_expired;
- sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer.data =
- (unsigned long)&sta->timer_to_tid[tid];
- init_timer(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer);
-
- /* create a new queue for this aggregation */
- ret = ieee80211_ht_agg_queue_add(local, sta, tid);
-
- /* case no queue is available to aggregation
- * don't switch to aggregation */
- if (ret) {
-#ifdef CONFIG_MAC80211_HT_DEBUG
- printk(KERN_DEBUG "BA request denied - queue unavailable for"
- " tid %d\n", tid);
-#endif /* CONFIG_MAC80211_HT_DEBUG */
- goto err_unlock_queue;
- }
- sdata = sta->sdata;
-
- /* Ok, the Addba frame hasn't been sent yet, but if the driver calls the
- * call back right away, it must see that the flow has begun */
- *state |= HT_ADDBA_REQUESTED_MSK;
-
- if (local->ops->ampdu_action)
- ret = local->ops->ampdu_action(hw, IEEE80211_AMPDU_TX_START,
- ra, tid, &start_seq_num);
-
- if (ret) {
- /* No need to requeue the packets in the agg queue, since we
- * held the tx lock: no packet could be enqueued to the newly
- * allocated queue */
- ieee80211_ht_agg_queue_remove(local, sta, tid, 0);
-#ifdef CONFIG_MAC80211_HT_DEBUG
- printk(KERN_DEBUG "BA request denied - HW unavailable for"
- " tid %d\n", tid);
-#endif /* CONFIG_MAC80211_HT_DEBUG */
- *state = HT_AGG_STATE_IDLE;
- goto err_unlock_queue;
- }
-
- /* Will put all the packets in the new SW queue */
- ieee80211_requeue(local, ieee802_1d_to_ac[tid]);
- spin_unlock_bh(&sta->lock);
-
- /* send an addBA request */
- sta->ampdu_mlme.dialog_token_allocator++;
- sta->ampdu_mlme.tid_tx[tid]->dialog_token =
- sta->ampdu_mlme.dialog_token_allocator;
- sta->ampdu_mlme.tid_tx[tid]->ssn = start_seq_num;
-
-
- ieee80211_send_addba_request(sta->sdata->dev, ra, tid,
- sta->ampdu_mlme.tid_tx[tid]->dialog_token,
- sta->ampdu_mlme.tid_tx[tid]->ssn,
- 0x40, 5000);
- /* activate the timer for the recipient's addBA response */
- sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer.expires =
- jiffies + ADDBA_RESP_INTERVAL;
- add_timer(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer);
-#ifdef CONFIG_MAC80211_HT_DEBUG
- printk(KERN_DEBUG "activated addBA response timer on tid %d\n", tid);
-#endif
- goto exit;
-
-err_unlock_queue:
- kfree(sta->ampdu_mlme.tid_tx[tid]);
- sta->ampdu_mlme.tid_tx[tid] = NULL;
- ret = -EBUSY;
-err_unlock_sta:
- spin_unlock_bh(&sta->lock);
-exit:
- rcu_read_unlock();
return ret;
}
-EXPORT_SYMBOL(ieee80211_start_tx_ba_session);
-
-int ieee80211_stop_tx_ba_session(struct ieee80211_hw *hw,
- u8 *ra, u16 tid,
- enum ieee80211_back_parties initiator)
-{
- struct ieee80211_local *local = hw_to_local(hw);
- struct sta_info *sta;
- u8 *state;
- int ret = 0;
- DECLARE_MAC_BUF(mac);
-
- if (tid >= STA_TID_NUM)
- return -EINVAL;
-
- rcu_read_lock();
- sta = sta_info_get(local, ra);
- if (!sta) {
- rcu_read_unlock();
- return -ENOENT;
- }
-
- /* check if the TID is in aggregation */
- state = &sta->ampdu_mlme.tid_state_tx[tid];
- spin_lock_bh(&sta->lock);
-
- if (*state != HT_AGG_STATE_OPERATIONAL) {
- ret = -ENOENT;
- goto stop_BA_exit;
- }
-
-#ifdef CONFIG_MAC80211_HT_DEBUG
- printk(KERN_DEBUG "Tx BA session stop requested for %s tid %u\n",
- print_mac(mac, ra), tid);
-#endif /* CONFIG_MAC80211_HT_DEBUG */
-
- ieee80211_stop_queue(hw, sta->tid_to_tx_q[tid]);
-
- *state = HT_AGG_STATE_REQ_STOP_BA_MSK |
- (initiator << HT_AGG_STATE_INITIATOR_SHIFT);
-
- if (local->ops->ampdu_action)
- ret = local->ops->ampdu_action(hw, IEEE80211_AMPDU_TX_STOP,
- ra, tid, NULL);
-
- /* case HW denied going back to legacy */
- if (ret) {
- WARN_ON(ret != -EBUSY);
- *state = HT_AGG_STATE_OPERATIONAL;
- ieee80211_wake_queue(hw, sta->tid_to_tx_q[tid]);
- goto stop_BA_exit;
- }
-
-stop_BA_exit:
- spin_unlock_bh(&sta->lock);
- rcu_read_unlock();
- return ret;
-}
-EXPORT_SYMBOL(ieee80211_stop_tx_ba_session);
-
-void ieee80211_start_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u16 tid)
-{
- struct ieee80211_local *local = hw_to_local(hw);
- struct sta_info *sta;
- u8 *state;
- DECLARE_MAC_BUF(mac);
-
- if (tid >= STA_TID_NUM) {
-#ifdef CONFIG_MAC80211_HT_DEBUG
- printk(KERN_DEBUG "Bad TID value: tid = %d (>= %d)\n",
- tid, STA_TID_NUM);
-#endif
- return;
- }
-
- rcu_read_lock();
- sta = sta_info_get(local, ra);
- if (!sta) {
- rcu_read_unlock();
-#ifdef CONFIG_MAC80211_HT_DEBUG
- printk(KERN_DEBUG "Could not find station: %s\n",
- print_mac(mac, ra));
-#endif
- return;
- }
-
- state = &sta->ampdu_mlme.tid_state_tx[tid];
- spin_lock_bh(&sta->lock);
-
- if (!(*state & HT_ADDBA_REQUESTED_MSK)) {
-#ifdef CONFIG_MAC80211_HT_DEBUG
- printk(KERN_DEBUG "addBA was not requested yet, state is %d\n",
- *state);
-#endif
- spin_unlock_bh(&sta->lock);
- rcu_read_unlock();
- return;
- }
-
- WARN_ON_ONCE(*state & HT_ADDBA_DRV_READY_MSK);
-
- *state |= HT_ADDBA_DRV_READY_MSK;
-
- if (*state == HT_AGG_STATE_OPERATIONAL) {
-#ifdef CONFIG_MAC80211_HT_DEBUG
- printk(KERN_DEBUG "Aggregation is on for tid %d \n", tid);
-#endif
- ieee80211_wake_queue(hw, sta->tid_to_tx_q[tid]);
- }
- spin_unlock_bh(&sta->lock);
- rcu_read_unlock();
-}
-EXPORT_SYMBOL(ieee80211_start_tx_ba_cb);
-
-void ieee80211_stop_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u8 tid)
-{
- struct ieee80211_local *local = hw_to_local(hw);
- struct sta_info *sta;
- u8 *state;
- int agg_queue;
- DECLARE_MAC_BUF(mac);
-
- if (tid >= STA_TID_NUM) {
-#ifdef CONFIG_MAC80211_HT_DEBUG
- printk(KERN_DEBUG "Bad TID value: tid = %d (>= %d)\n",
- tid, STA_TID_NUM);
-#endif
- return;
- }
-
-#ifdef CONFIG_MAC80211_HT_DEBUG
- printk(KERN_DEBUG "Stopping Tx BA session for %s tid %d\n",
- print_mac(mac, ra), tid);
-#endif /* CONFIG_MAC80211_HT_DEBUG */
-
- rcu_read_lock();
- sta = sta_info_get(local, ra);
- if (!sta) {
-#ifdef CONFIG_MAC80211_HT_DEBUG
- printk(KERN_DEBUG "Could not find station: %s\n",
- print_mac(mac, ra));
-#endif
- rcu_read_unlock();
- return;
- }
- state = &sta->ampdu_mlme.tid_state_tx[tid];
- /* NOTE: no need to use sta->lock in this state check, as
- * ieee80211_stop_tx_ba_session will let only one stop call to
- * pass through per sta/tid
- */
- if ((*state & HT_AGG_STATE_REQ_STOP_BA_MSK) == 0) {
-#ifdef CONFIG_MAC80211_HT_DEBUG
- printk(KERN_DEBUG "unexpected callback to A-MPDU stop\n");
-#endif
- rcu_read_unlock();
- return;
- }
-
- if (*state & HT_AGG_STATE_INITIATOR_MSK)
- ieee80211_send_delba(sta->sdata->dev, ra, tid,
- WLAN_BACK_INITIATOR, WLAN_REASON_QSTA_NOT_USE);
-
- agg_queue = sta->tid_to_tx_q[tid];
-
- ieee80211_ht_agg_queue_remove(local, sta, tid, 1);
-
- /* We just requeued the all the frames that were in the
- * removed queue, and since we might miss a softirq we do
- * netif_schedule_queue. ieee80211_wake_queue is not used
- * here as this queue is not necessarily stopped
- */
- netif_schedule_queue(netdev_get_tx_queue(local->mdev, agg_queue));
- spin_lock_bh(&sta->lock);
- *state = HT_AGG_STATE_IDLE;
- sta->ampdu_mlme.addba_req_num[tid] = 0;
- kfree(sta->ampdu_mlme.tid_tx[tid]);
- sta->ampdu_mlme.tid_tx[tid] = NULL;
- spin_unlock_bh(&sta->lock);
-
- rcu_read_unlock();
-}
-EXPORT_SYMBOL(ieee80211_stop_tx_ba_cb);
-
-void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_hw *hw,
- const u8 *ra, u16 tid)
-{
- struct ieee80211_local *local = hw_to_local(hw);
- struct ieee80211_ra_tid *ra_tid;
- struct sk_buff *skb = dev_alloc_skb(0);
-
- if (unlikely(!skb)) {
-#ifdef CONFIG_MAC80211_HT_DEBUG
- if (net_ratelimit())
- printk(KERN_WARNING "%s: Not enough memory, "
- "dropping start BA session", skb->dev->name);
-#endif
- return;
- }
- ra_tid = (struct ieee80211_ra_tid *) &skb->cb;
- memcpy(&ra_tid->ra, ra, ETH_ALEN);
- ra_tid->tid = tid;
-
- skb->pkt_type = IEEE80211_ADDBA_MSG;
- skb_queue_tail(&local->skb_queue, skb);
- tasklet_schedule(&local->tasklet);
-}
-EXPORT_SYMBOL(ieee80211_start_tx_ba_cb_irqsafe);
-
-void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_hw *hw,
- const u8 *ra, u16 tid)
+void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata,
+ u32 changed)
{
- struct ieee80211_local *local = hw_to_local(hw);
- struct ieee80211_ra_tid *ra_tid;
- struct sk_buff *skb = dev_alloc_skb(0);
+ struct ieee80211_local *local = sdata->local;
+ static const u8 zero[ETH_ALEN] = { 0 };
- if (unlikely(!skb)) {
-#ifdef CONFIG_MAC80211_HT_DEBUG
- if (net_ratelimit())
- printk(KERN_WARNING "%s: Not enough memory, "
- "dropping stop BA session", skb->dev->name);
-#endif
+ if (!changed)
return;
- }
- ra_tid = (struct ieee80211_ra_tid *) &skb->cb;
- memcpy(&ra_tid->ra, ra, ETH_ALEN);
- ra_tid->tid = tid;
-
- skb->pkt_type = IEEE80211_DELBA_MSG;
- skb_queue_tail(&local->skb_queue, skb);
- tasklet_schedule(&local->tasklet);
-}
-EXPORT_SYMBOL(ieee80211_stop_tx_ba_cb_irqsafe);
-static void ieee80211_set_multicast_list(struct net_device *dev)
-{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
- int allmulti, promisc, sdata_allmulti, sdata_promisc;
-
- allmulti = !!(dev->flags & IFF_ALLMULTI);
- promisc = !!(dev->flags & IFF_PROMISC);
- sdata_allmulti = !!(sdata->flags & IEEE80211_SDATA_ALLMULTI);
- sdata_promisc = !!(sdata->flags & IEEE80211_SDATA_PROMISC);
-
- if (allmulti != sdata_allmulti) {
- if (dev->flags & IFF_ALLMULTI)
- atomic_inc(&local->iff_allmultis);
- else
- atomic_dec(&local->iff_allmultis);
- sdata->flags ^= IEEE80211_SDATA_ALLMULTI;
- }
-
- if (promisc != sdata_promisc) {
- if (dev->flags & IFF_PROMISC)
- atomic_inc(&local->iff_promiscs);
+ if (sdata->vif.type == NL80211_IFTYPE_STATION) {
+ /*
+ * While not associated, claim a BSSID of all-zeroes
+ * so that drivers don't do any weird things with the
+ * BSSID at that time.
+ */
+ if (sdata->vif.bss_conf.assoc)
+ sdata->vif.bss_conf.bssid = sdata->u.mgd.bssid;
else
- atomic_dec(&local->iff_promiscs);
- sdata->flags ^= IEEE80211_SDATA_PROMISC;
- }
-
- dev_mc_sync(local->mdev, dev);
-}
-
-static const struct header_ops ieee80211_header_ops = {
- .create = eth_header,
- .parse = header_parse_80211,
- .rebuild = eth_rebuild_header,
- .cache = eth_header_cache,
- .cache_update = eth_header_cache_update,
-};
-
-void ieee80211_if_setup(struct net_device *dev)
-{
- ether_setup(dev);
- dev->hard_start_xmit = ieee80211_subif_start_xmit;
- dev->wireless_handlers = &ieee80211_iw_handler_def;
- dev->set_multicast_list = ieee80211_set_multicast_list;
- dev->change_mtu = ieee80211_change_mtu;
- dev->open = ieee80211_open;
- dev->stop = ieee80211_stop;
- dev->destructor = free_netdev;
-}
-
-/* everything else */
-
-int ieee80211_if_config(struct ieee80211_sub_if_data *sdata, u32 changed)
-{
- struct ieee80211_local *local = sdata->local;
- struct ieee80211_if_conf conf;
-
- if (WARN_ON(!netif_running(sdata->dev)))
- return 0;
-
- if (!local->ops->config_interface)
- return 0;
-
- memset(&conf, 0, sizeof(conf));
- conf.changed = changed;
-
- if (sdata->vif.type == IEEE80211_IF_TYPE_STA ||
- sdata->vif.type == IEEE80211_IF_TYPE_IBSS) {
- conf.bssid = sdata->u.sta.bssid;
- conf.ssid = sdata->u.sta.ssid;
- conf.ssid_len = sdata->u.sta.ssid_len;
- } else if (sdata->vif.type == IEEE80211_IF_TYPE_AP) {
- conf.bssid = sdata->dev->dev_addr;
- conf.ssid = sdata->u.ap.ssid;
- conf.ssid_len = sdata->u.ap.ssid_len;
- } else if (ieee80211_vif_is_mesh(&sdata->vif)) {
- u8 zero[ETH_ALEN] = { 0 };
- conf.bssid = zero;
- conf.ssid = zero;
- conf.ssid_len = 0;
+ sdata->vif.bss_conf.bssid = zero;
+ } else if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
+ sdata->vif.bss_conf.bssid = sdata->u.ibss.bssid;
+ else if (sdata->vif.type == NL80211_IFTYPE_AP)
+ sdata->vif.bss_conf.bssid = sdata->dev->dev_addr;
+ else if (ieee80211_vif_is_mesh(&sdata->vif)) {
+ sdata->vif.bss_conf.bssid = zero;
} else {
WARN_ON(1);
- return -EINVAL;
- }
-
- if (WARN_ON(!conf.bssid && (changed & IEEE80211_IFCC_BSSID)))
- return -EINVAL;
-
- if (WARN_ON(!conf.ssid && (changed & IEEE80211_IFCC_SSID)))
- return -EINVAL;
-
- return local->ops->config_interface(local_to_hw(local),
- &sdata->vif, &conf);
-}
-
-int ieee80211_hw_config(struct ieee80211_local *local)
-{
- struct ieee80211_channel *chan;
- int ret = 0;
-
- if (local->sta_sw_scanning)
- chan = local->scan_channel;
- else
- chan = local->oper_channel;
-
- local->hw.conf.channel = chan;
-
- if (!local->hw.conf.power_level)
- local->hw.conf.power_level = chan->max_power;
- else
- local->hw.conf.power_level = min(chan->max_power,
- local->hw.conf.power_level);
-
- local->hw.conf.max_antenna_gain = chan->max_antenna_gain;
-
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
- printk(KERN_DEBUG "%s: HW CONFIG: freq=%d\n",
- wiphy_name(local->hw.wiphy), chan->center_freq);
-#endif
-
- if (local->open_count)
- ret = local->ops->config(local_to_hw(local), &local->hw.conf);
-
- return ret;
-}
-
-/**
- * ieee80211_handle_ht should be used only after legacy configuration
- * has been determined namely band, as ht configuration depends upon
- * the hardware's HT abilities for a _specific_ band.
- */
-u32 ieee80211_handle_ht(struct ieee80211_local *local, int enable_ht,
- struct ieee80211_ht_info *req_ht_cap,
- struct ieee80211_ht_bss_info *req_bss_cap)
-{
- struct ieee80211_conf *conf = &local->hw.conf;
- struct ieee80211_supported_band *sband;
- struct ieee80211_ht_info ht_conf;
- struct ieee80211_ht_bss_info ht_bss_conf;
- u32 changed = 0;
- int i;
- u8 max_tx_streams = IEEE80211_HT_CAP_MAX_STREAMS;
- u8 tx_mcs_set_cap;
-
- sband = local->hw.wiphy->bands[conf->channel->band];
-
- memset(&ht_conf, 0, sizeof(struct ieee80211_ht_info));
- memset(&ht_bss_conf, 0, sizeof(struct ieee80211_ht_bss_info));
-
- /* HT is not supported */
- if (!sband->ht_info.ht_supported) {
- conf->flags &= ~IEEE80211_CONF_SUPPORT_HT_MODE;
- goto out;
+ return;
}
- /* disable HT */
- if (!enable_ht) {
- if (conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE)
- changed |= BSS_CHANGED_HT;
- conf->flags &= ~IEEE80211_CONF_SUPPORT_HT_MODE;
- conf->ht_conf.ht_supported = 0;
- goto out;
+ switch (sdata->vif.type) {
+ case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_ADHOC:
+ case NL80211_IFTYPE_MESH_POINT:
+ break;
+ default:
+ /* do not warn to simplify caller in scan.c */
+ changed &= ~BSS_CHANGED_BEACON_ENABLED;
+ if (WARN_ON(changed & BSS_CHANGED_BEACON))
+ return;
+ break;
}
-
- if (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE))
- changed |= BSS_CHANGED_HT;
-
- conf->flags |= IEEE80211_CONF_SUPPORT_HT_MODE;
- ht_conf.ht_supported = 1;
-
- ht_conf.cap = req_ht_cap->cap & sband->ht_info.cap;
- ht_conf.cap &= ~(IEEE80211_HT_CAP_MIMO_PS);
- ht_conf.cap |= sband->ht_info.cap & IEEE80211_HT_CAP_MIMO_PS;
- ht_bss_conf.primary_channel = req_bss_cap->primary_channel;
- ht_bss_conf.bss_cap = req_bss_cap->bss_cap;
- ht_bss_conf.bss_op_mode = req_bss_cap->bss_op_mode;
-
- ht_conf.ampdu_factor = req_ht_cap->ampdu_factor;
- ht_conf.ampdu_density = req_ht_cap->ampdu_density;
-
- /* Bits 96-100 */
- tx_mcs_set_cap = sband->ht_info.supp_mcs_set[12];
-
- /* configure suppoerted Tx MCS according to requested MCS
- * (based in most cases on Rx capabilities of peer) and self
- * Tx MCS capabilities (as defined by low level driver HW
- * Tx capabilities) */
- if (!(tx_mcs_set_cap & IEEE80211_HT_CAP_MCS_TX_DEFINED))
- goto check_changed;
-
- /* Counting from 0 therfore + 1 */
- if (tx_mcs_set_cap & IEEE80211_HT_CAP_MCS_TX_RX_DIFF)
- max_tx_streams = ((tx_mcs_set_cap &
- IEEE80211_HT_CAP_MCS_TX_STREAMS) >> 2) + 1;
-
- for (i = 0; i < max_tx_streams; i++)
- ht_conf.supp_mcs_set[i] =
- sband->ht_info.supp_mcs_set[i] &
- req_ht_cap->supp_mcs_set[i];
-
- if (tx_mcs_set_cap & IEEE80211_HT_CAP_MCS_TX_UEQM)
- for (i = IEEE80211_SUPP_MCS_SET_UEQM;
- i < IEEE80211_SUPP_MCS_SET_LEN; i++)
- ht_conf.supp_mcs_set[i] =
- sband->ht_info.supp_mcs_set[i] &
- req_ht_cap->supp_mcs_set[i];
-
-check_changed:
- /* if bss configuration changed store the new one */
- if (memcmp(&conf->ht_conf, &ht_conf, sizeof(ht_conf)) ||
- memcmp(&conf->ht_bss_conf, &ht_bss_conf, sizeof(ht_bss_conf))) {
- changed |= BSS_CHANGED_HT;
- memcpy(&conf->ht_conf, &ht_conf, sizeof(ht_conf));
- memcpy(&conf->ht_bss_conf, &ht_bss_conf, sizeof(ht_bss_conf));
+ if (changed & BSS_CHANGED_BEACON_ENABLED) {
+ if (local->sw_scanning) {
+ sdata->vif.bss_conf.enable_beacon = false;
+ } else {
+ /*
+ * Beacon should be enabled, but AP mode must
+ * check whether there is a beacon configured.
+ */
+ switch (sdata->vif.type) {
+ case NL80211_IFTYPE_AP:
+ sdata->vif.bss_conf.enable_beacon =
+ !!rcu_dereference(sdata->u.ap.beacon);
+ break;
+ case NL80211_IFTYPE_ADHOC:
+ sdata->vif.bss_conf.enable_beacon =
+ !!rcu_dereference(sdata->u.ibss.presp);
+ break;
+ case NL80211_IFTYPE_MESH_POINT:
+ sdata->vif.bss_conf.enable_beacon = true;
+ break;
+ default:
+ /* not reached */
+ WARN_ON(1);
+ break;
+ }
+ }
}
-out:
- return changed;
-}
-void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata,
- u32 changed)
-{
- struct ieee80211_local *local = sdata->local;
+ drv_bss_info_changed(local, &sdata->vif,
+ &sdata->vif.bss_conf, changed);
- if (!changed)
- return;
-
- if (local->ops->bss_info_changed)
- local->ops->bss_info_changed(local_to_hw(local),
- &sdata->vif,
- &sdata->bss_conf,
- changed);
+ /* DEPRECATED */
+ local->hw.conf.beacon_int = sdata->vif.bss_conf.beacon_int;
}
-u32 ieee80211_reset_erp_info(struct net_device *dev)
+u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata)
{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-
- sdata->bss_conf.use_cts_prot = 0;
- sdata->bss_conf.use_short_preamble = 0;
- return BSS_CHANGED_ERP_CTS_PROT | BSS_CHANGED_ERP_PREAMBLE;
+ sdata->vif.bss_conf.use_cts_prot = false;
+ sdata->vif.bss_conf.use_short_preamble = false;
+ sdata->vif.bss_conf.use_short_slot = false;
+ return BSS_CHANGED_ERP_CTS_PROT |
+ BSS_CHANGED_ERP_PREAMBLE |
+ BSS_CHANGED_ERP_SLOT;
}
void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw,
{
struct ieee80211_local *local = (struct ieee80211_local *) data;
struct sk_buff *skb;
- struct ieee80211_rx_status rx_status;
struct ieee80211_ra_tid *ra_tid;
while ((skb = skb_dequeue(&local->skb_queue)) ||
(skb = skb_dequeue(&local->skb_queue_unreliable))) {
switch (skb->pkt_type) {
case IEEE80211_RX_MSG:
- /* status is in skb->cb */
- memcpy(&rx_status, skb->cb, sizeof(rx_status));
/* Clear skb->pkt_type in order to not confuse kernel
* netstack. */
skb->pkt_type = 0;
- __ieee80211_rx(local_to_hw(local), skb, &rx_status);
+ ieee80211_rx(local_to_hw(local), skb);
break;
case IEEE80211_TX_STATUS_MSG:
skb->pkt_type = 0;
dev_kfree_skb(skb);
break ;
default:
- WARN_ON(1);
+ WARN(1, "mac80211: Packet is of unknown type %d\n",
+ skb->pkt_type);
dev_kfree_skb(skb);
break;
}
}
}
-/* Remove added headers (e.g., QoS control), encryption header/MIC, etc. to
- * make a prepared TX frame (one that has been given to hw) to look like brand
- * new IEEE 802.11 frame that is ready to go through TX processing again.
- * Also, tx_packet_data in cb is restored from tx_control. */
-static void ieee80211_remove_tx_extra(struct ieee80211_local *local,
- struct ieee80211_key *key,
- struct sk_buff *skb)
-{
- int hdrlen, iv_len, mic_len;
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-
- info->flags &= IEEE80211_TX_CTL_REQ_TX_STATUS |
- IEEE80211_TX_CTL_DO_NOT_ENCRYPT |
- IEEE80211_TX_CTL_REQUEUE |
- IEEE80211_TX_CTL_EAPOL_FRAME;
-
- hdrlen = ieee80211_get_hdrlen_from_skb(skb);
-
- if (!key)
- goto no_key;
-
- switch (key->conf.alg) {
- case ALG_WEP:
- iv_len = WEP_IV_LEN;
- mic_len = WEP_ICV_LEN;
- break;
- case ALG_TKIP:
- iv_len = TKIP_IV_LEN;
- mic_len = TKIP_ICV_LEN;
- break;
- case ALG_CCMP:
- iv_len = CCMP_HDR_LEN;
- mic_len = CCMP_MIC_LEN;
- break;
- default:
- goto no_key;
- }
-
- if (skb->len >= mic_len &&
- !(key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE))
- skb_trim(skb, skb->len - mic_len);
- if (skb->len >= iv_len && skb->len > hdrlen) {
- memmove(skb->data + iv_len, skb->data, hdrlen);
- skb_pull(skb, iv_len);
- }
-
-no_key:
- {
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
- u16 fc = le16_to_cpu(hdr->frame_control);
- if ((fc & 0x8C) == 0x88) /* QoS Control Field */ {
- fc &= ~IEEE80211_STYPE_QOS_DATA;
- hdr->frame_control = cpu_to_le16(fc);
- memmove(skb->data + 2, skb->data, hdrlen - 2);
- skb_pull(skb, 2);
- }
- }
-}
-
static void ieee80211_handle_filtered_frame(struct ieee80211_local *local,
struct sta_info *sta,
struct sk_buff *skb)
*/
if (test_sta_flags(sta, WLAN_STA_PS) &&
skb_queue_len(&sta->tx_filtered) < STA_MAX_TX_BUFFER) {
- ieee80211_remove_tx_extra(local, sta->key, skb);
skb_queue_tail(&sta->tx_filtered, skb);
return;
}
if (!test_sta_flags(sta, WLAN_STA_PS) &&
- !(info->flags & IEEE80211_TX_CTL_REQUEUE)) {
+ !(info->flags & IEEE80211_TX_INTFL_RETRIED)) {
/* Software retry the packet once */
- info->flags |= IEEE80211_TX_CTL_REQUEUE;
- ieee80211_remove_tx_extra(local, sta->key, skb);
- dev_queue_xmit(skb);
+ info->flags |= IEEE80211_TX_INTFL_RETRIED;
+ ieee80211_add_pending_skb(local, skb);
return;
}
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
u16 frag, type;
__le16 fc;
+ struct ieee80211_supported_band *sband;
struct ieee80211_tx_status_rtap_hdr *rthdr;
struct ieee80211_sub_if_data *sdata;
struct net_device *prev_dev = NULL;
struct sta_info *sta;
+ int retry_count = -1, i;
+
+ for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
+ /* the HW cannot have attempted that rate */
+ if (i >= hw->max_rates) {
+ info->status.rates[i].idx = -1;
+ info->status.rates[i].count = 0;
+ }
+
+ retry_count += info->status.rates[i].count;
+ }
+ if (retry_count < 0)
+ retry_count = 0;
rcu_read_lock();
- if (info->status.excessive_retries) {
- sta = sta_info_get(local, hdr->addr1);
- if (sta) {
- if (test_sta_flags(sta, WLAN_STA_PS)) {
- /*
- * The STA is in power save mode, so assume
- * that this TX packet failed because of that.
- */
- ieee80211_handle_filtered_frame(local, sta, skb);
- rcu_read_unlock();
- return;
- }
+ sband = local->hw.wiphy->bands[info->band];
+
+ sta = sta_info_get(local, hdr->addr1);
+
+ if (sta) {
+ if (!(info->flags & IEEE80211_TX_STAT_ACK) &&
+ test_sta_flags(sta, WLAN_STA_PS)) {
+ /*
+ * The STA is in power save mode, so assume
+ * that this TX packet failed because of that.
+ */
+ ieee80211_handle_filtered_frame(local, sta, skb);
+ rcu_read_unlock();
+ return;
}
- }
- fc = hdr->frame_control;
+ fc = hdr->frame_control;
+
+ if ((info->flags & IEEE80211_TX_STAT_AMPDU_NO_BACK) &&
+ (ieee80211_is_data_qos(fc))) {
+ u16 tid, ssn;
+ u8 *qc;
- if ((info->flags & IEEE80211_TX_STAT_AMPDU_NO_BACK) &&
- (ieee80211_is_data_qos(fc))) {
- u16 tid, ssn;
- u8 *qc;
- sta = sta_info_get(local, hdr->addr1);
- if (sta) {
qc = ieee80211_get_qos_ctl(hdr);
tid = qc[0] & 0xf;
ssn = ((le16_to_cpu(hdr->seq_ctrl) + 0x10)
& IEEE80211_SCTL_SEQ);
- ieee80211_send_bar(sta->sdata->dev, hdr->addr1,
+ ieee80211_send_bar(sta->sdata, hdr->addr1,
tid, ssn);
}
- }
- if (info->flags & IEEE80211_TX_STAT_TX_FILTERED) {
- sta = sta_info_get(local, hdr->addr1);
- if (sta) {
+ if (info->flags & IEEE80211_TX_STAT_TX_FILTERED) {
ieee80211_handle_filtered_frame(local, sta, skb);
rcu_read_unlock();
return;
+ } else {
+ if (!(info->flags & IEEE80211_TX_STAT_ACK))
+ sta->tx_retry_failed++;
+ sta->tx_retry_count += retry_count;
}
- } else
- rate_control_tx_status(local->mdev, skb);
+
+ rate_control_tx_status(local, sband, sta, skb);
+ }
rcu_read_unlock();
local->dot11TransmittedFrameCount++;
if (is_multicast_ether_addr(hdr->addr1))
local->dot11MulticastTransmittedFrameCount++;
- if (info->status.retry_count > 0)
+ if (retry_count > 0)
local->dot11RetryCount++;
- if (info->status.retry_count > 1)
+ if (retry_count > 1)
local->dot11MultipleRetryCount++;
}
rthdr->hdr.it_len = cpu_to_le16(sizeof(*rthdr));
rthdr->hdr.it_present =
cpu_to_le32((1 << IEEE80211_RADIOTAP_TX_FLAGS) |
- (1 << IEEE80211_RADIOTAP_DATA_RETRIES));
+ (1 << IEEE80211_RADIOTAP_DATA_RETRIES) |
+ (1 << IEEE80211_RADIOTAP_RATE));
if (!(info->flags & IEEE80211_TX_STAT_ACK) &&
!is_multicast_ether_addr(hdr->addr1))
rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_FAIL);
- if ((info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) &&
- (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT))
+ /*
+ * XXX: Once radiotap gets the bitmap reset thing the vendor
+ * extensions proposal contains, we can actually report
+ * the whole set of tries we did.
+ */
+ if ((info->status.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) ||
+ (info->status.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT))
rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_CTS);
- else if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS)
+ else if (info->status.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS)
rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_RTS);
+ if (info->status.rates[0].idx >= 0 &&
+ !(info->status.rates[0].flags & IEEE80211_TX_RC_MCS))
+ rthdr->rate = sband->bitrates[
+ info->status.rates[0].idx].bitrate / 5;
- rthdr->data_retries = info->status.retry_count;
+ /* for now report the total retry_count */
+ rthdr->data_retries = retry_count;
/* XXX: is this sufficient for BPF? */
skb_set_mac_header(skb, 0);
rcu_read_lock();
list_for_each_entry_rcu(sdata, &local->interfaces, list) {
- if (sdata->vif.type == IEEE80211_IF_TYPE_MNTR) {
+ if (sdata->vif.type == NL80211_IFTYPE_MONITOR) {
if (!netif_running(sdata->dev))
continue;
}
EXPORT_SYMBOL(ieee80211_tx_status);
+static void ieee80211_restart_work(struct work_struct *work)
+{
+ struct ieee80211_local *local =
+ container_of(work, struct ieee80211_local, restart_work);
+
+ rtnl_lock();
+ ieee80211_reconfig(local);
+ rtnl_unlock();
+}
+
+void ieee80211_restart_hw(struct ieee80211_hw *hw)
+{
+ struct ieee80211_local *local = hw_to_local(hw);
+
+ /* use this reason, __ieee80211_resume will unblock it */
+ ieee80211_stop_queues_by_reason(hw,
+ IEEE80211_QUEUE_STOP_REASON_SUSPEND);
+
+ schedule_work(&local->restart_work);
+}
+EXPORT_SYMBOL(ieee80211_restart_hw);
+
struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
const struct ieee80211_ops *ops)
{
struct ieee80211_local *local;
- int priv_size;
+ int priv_size, i;
struct wiphy *wiphy;
/* Ensure 32-byte alignment of our private data and hw private data.
* +-------------------------+
*
*/
- priv_size = ((sizeof(struct ieee80211_local) +
- NETDEV_ALIGN_CONST) & ~NETDEV_ALIGN_CONST) +
- priv_data_len;
+ priv_size = ALIGN(sizeof(*local), NETDEV_ALIGN) + priv_data_len;
wiphy = wiphy_new(&mac80211_config_ops, priv_size);
wiphy->privid = mac80211_wiphy_privid;
+ /* Yes, putting cfg80211_bss into ieee80211_bss is a hack */
+ wiphy->bss_priv_size = sizeof(struct ieee80211_bss) -
+ sizeof(struct cfg80211_bss);
+
local = wiphy_priv(wiphy);
+
local->hw.wiphy = wiphy;
- local->hw.priv = (char *)local +
- ((sizeof(struct ieee80211_local) +
- NETDEV_ALIGN_CONST) & ~NETDEV_ALIGN_CONST);
+ local->hw.priv = (char *)local + ALIGN(sizeof(*local), NETDEV_ALIGN);
BUG_ON(!ops->tx);
BUG_ON(!ops->start);
BUG_ON(!ops->configure_filter);
local->ops = ops;
- local->hw.queues = 1; /* default */
-
- local->bridge_packets = 1;
-
- local->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD;
- local->fragmentation_threshold = IEEE80211_MAX_FRAG_THRESHOLD;
- local->short_retry_limit = 7;
- local->long_retry_limit = 4;
- local->hw.conf.radio_enabled = 1;
+ /* set up some defaults */
+ local->hw.queues = 1;
+ local->hw.max_rates = 1;
+ local->hw.conf.long_frame_max_tx_count = wiphy->retry_long;
+ local->hw.conf.short_frame_max_tx_count = wiphy->retry_short;
+ local->hw.conf.radio_enabled = true;
+ local->user_power_level = -1;
INIT_LIST_HEAD(&local->interfaces);
+ mutex_init(&local->iflist_mtx);
+ mutex_init(&local->scan_mtx);
spin_lock_init(&local->key_lock);
- INIT_DELAYED_WORK(&local->scan_work, ieee80211_sta_scan_work);
+ spin_lock_init(&local->queue_stop_reason_lock);
+
+ INIT_DELAYED_WORK(&local->scan_work, ieee80211_scan_work);
+
+ INIT_WORK(&local->restart_work, ieee80211_restart_work);
+
+ INIT_WORK(&local->dynamic_ps_enable_work,
+ ieee80211_dynamic_ps_enable_work);
+ INIT_WORK(&local->dynamic_ps_disable_work,
+ ieee80211_dynamic_ps_disable_work);
+ setup_timer(&local->dynamic_ps_timer,
+ ieee80211_dynamic_ps_timer, (unsigned long) local);
sta_info_init(local);
+ for (i = 0; i < IEEE80211_MAX_QUEUES; i++)
+ skb_queue_head_init(&local->pending[i]);
tasklet_init(&local->tx_pending_tasklet, ieee80211_tx_pending,
(unsigned long)local);
tasklet_disable(&local->tx_pending_tasklet);
skb_queue_head_init(&local->skb_queue);
skb_queue_head_init(&local->skb_queue_unreliable);
+ spin_lock_init(&local->ampdu_lock);
+
return local_to_hw(local);
}
EXPORT_SYMBOL(ieee80211_alloc_hw);
+static const struct net_device_ops ieee80211_master_ops = {
+ .ndo_start_xmit = ieee80211_master_start_xmit,
+ .ndo_open = ieee80211_master_open,
+ .ndo_stop = ieee80211_master_stop,
+ .ndo_set_multicast_list = ieee80211_master_set_multicast_list,
+ .ndo_select_queue = ieee80211_select_queue,
+};
+
+static void ieee80211_master_setup(struct net_device *mdev)
+{
+ mdev->type = ARPHRD_IEEE80211;
+ mdev->netdev_ops = &ieee80211_master_ops;
+ mdev->header_ops = &ieee80211_header_ops;
+ mdev->tx_queue_len = 1000;
+ mdev->addr_len = ETH_ALEN;
+}
+
int ieee80211_register_hw(struct ieee80211_hw *hw)
{
struct ieee80211_local *local = hw_to_local(hw);
- const char *name;
int result;
enum ieee80211_band band;
struct net_device *mdev;
- struct wireless_dev *mwdev;
+ struct ieee80211_master_priv *mpriv;
+ int channels, i, j, max_bitrates;
+ bool supp_ht;
+ static const u32 cipher_suites[] = {
+ WLAN_CIPHER_SUITE_WEP40,
+ WLAN_CIPHER_SUITE_WEP104,
+ WLAN_CIPHER_SUITE_TKIP,
+ WLAN_CIPHER_SUITE_CCMP,
+
+ /* keep last -- depends on hw flags! */
+ WLAN_CIPHER_SUITE_AES_CMAC
+ };
/*
* generic code guarantees at least one band,
* set this very early because much code assumes
* that hw.conf.channel is assigned
*/
+ channels = 0;
+ max_bitrates = 0;
+ supp_ht = false;
for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
struct ieee80211_supported_band *sband;
sband = local->hw.wiphy->bands[band];
- if (sband) {
+ if (!sband)
+ continue;
+ if (!local->oper_channel) {
/* init channel we're on */
local->hw.conf.channel =
- local->oper_channel =
- local->scan_channel = &sband->channels[0];
- break;
+ local->oper_channel = &sband->channels[0];
+ local->hw.conf.channel_type = NL80211_CHAN_NO_HT;
}
+ channels += sband->n_channels;
+
+ if (max_bitrates < sband->n_bitrates)
+ max_bitrates = sband->n_bitrates;
+ supp_ht = supp_ht || sband->ht_cap.ht_supported;
+ }
+
+ local->int_scan_req.n_channels = channels;
+ local->int_scan_req.channels = kzalloc(sizeof(void *) * channels, GFP_KERNEL);
+ if (!local->int_scan_req.channels)
+ return -ENOMEM;
+
+ /* if low-level driver supports AP, we also support VLAN */
+ if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_AP))
+ local->hw.wiphy->interface_modes |= BIT(NL80211_IFTYPE_AP_VLAN);
+
+ /* mac80211 always supports monitor */
+ local->hw.wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR);
+
+ if (local->hw.flags & IEEE80211_HW_SIGNAL_DBM)
+ local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
+ else if (local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC)
+ local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_UNSPEC;
+
+ /*
+ * Calculate scan IE length -- we need this to alloc
+ * memory and to subtract from the driver limit. It
+ * includes the (extended) supported rates and HT
+ * information -- SSID is the driver's responsibility.
+ */
+ local->scan_ies_len = 4 + max_bitrates; /* (ext) supp rates */
+ if (supp_ht)
+ local->scan_ies_len += 2 + sizeof(struct ieee80211_ht_cap);
+
+ if (!local->ops->hw_scan) {
+ /* For hw_scan, driver needs to set these up. */
+ local->hw.wiphy->max_scan_ssids = 4;
+ local->hw.wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN;
}
+ /*
+ * If the driver supports any scan IEs, then assume the
+ * limit includes the IEs mac80211 will add, otherwise
+ * leave it at zero and let the driver sort it out; we
+ * still pass our IEs to the driver but userspace will
+ * not be allowed to in that case.
+ */
+ if (local->hw.wiphy->max_scan_ie_len)
+ local->hw.wiphy->max_scan_ie_len -= local->scan_ies_len;
+
+ local->hw.wiphy->cipher_suites = cipher_suites;
+ local->hw.wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
+ if (!(local->hw.flags & IEEE80211_HW_MFP_CAPABLE))
+ local->hw.wiphy->n_cipher_suites--;
+
result = wiphy_register(local->hw.wiphy);
if (result < 0)
- return result;
+ goto fail_wiphy_register;
/*
* We use the number of queues for feature tests (QoS, HT) internally
*/
if (hw->queues > IEEE80211_MAX_QUEUES)
hw->queues = IEEE80211_MAX_QUEUES;
- if (hw->ampdu_queues > IEEE80211_MAX_AMPDU_QUEUES)
- hw->ampdu_queues = IEEE80211_MAX_AMPDU_QUEUES;
- if (hw->queues < 4)
- hw->ampdu_queues = 0;
-
- mdev = alloc_netdev_mq(sizeof(struct wireless_dev),
- "wmaster%d", ether_setup,
- ieee80211_num_queues(hw));
+
+ mdev = alloc_netdev_mq(sizeof(struct ieee80211_master_priv),
+ "wmaster%d", ieee80211_master_setup,
+ hw->queues);
if (!mdev)
goto fail_mdev_alloc;
- mwdev = netdev_priv(mdev);
- mdev->ieee80211_ptr = mwdev;
- mwdev->wiphy = local->hw.wiphy;
-
+ mpriv = netdev_priv(mdev);
+ mpriv->local = local;
local->mdev = mdev;
- ieee80211_rx_bss_list_init(local);
-
- mdev->hard_start_xmit = ieee80211_master_start_xmit;
- mdev->open = ieee80211_master_open;
- mdev->stop = ieee80211_master_stop;
- mdev->type = ARPHRD_IEEE80211;
- mdev->header_ops = &ieee80211_header_ops;
- mdev->set_multicast_list = ieee80211_master_set_multicast_list;
-
- name = wiphy_dev(local->hw.wiphy)->driver->name;
- local->hw.workqueue = create_freezeable_workqueue(name);
+ local->hw.workqueue =
+ create_singlethread_workqueue(wiphy_name(local->hw.wiphy));
if (!local->hw.workqueue) {
result = -ENOMEM;
goto fail_workqueue;
debugfs_hw_add(local);
- if (local->hw.conf.beacon_int < 10)
- local->hw.conf.beacon_int = 100;
+ if (local->hw.max_listen_interval == 0)
+ local->hw.max_listen_interval = 1;
- local->wstats_flags |= local->hw.flags & (IEEE80211_HW_SIGNAL_UNSPEC |
- IEEE80211_HW_SIGNAL_DB |
- IEEE80211_HW_SIGNAL_DBM) ?
- IW_QUAL_QUAL_UPDATED : IW_QUAL_QUAL_INVALID;
- local->wstats_flags |= local->hw.flags & IEEE80211_HW_NOISE_DBM ?
- IW_QUAL_NOISE_UPDATED : IW_QUAL_NOISE_INVALID;
- if (local->hw.flags & IEEE80211_HW_SIGNAL_DBM)
- local->wstats_flags |= IW_QUAL_DBM;
+ local->hw.conf.listen_interval = local->hw.max_listen_interval;
result = sta_info_start(local);
if (result < 0)
goto fail_sta_info;
+ result = ieee80211_wep_init(local);
+ if (result < 0) {
+ printk(KERN_DEBUG "%s: Failed to initialize wep: %d\n",
+ wiphy_name(local->hw.wiphy), result);
+ goto fail_wep;
+ }
+
rtnl_lock();
result = dev_alloc_name(local->mdev, local->mdev->name);
if (result < 0)
memcpy(local->mdev->dev_addr, local->hw.wiphy->perm_addr, ETH_ALEN);
SET_NETDEV_DEV(local->mdev, wiphy_dev(local->hw.wiphy));
+ local->mdev->features |= NETIF_F_NETNS_LOCAL;
result = register_netdevice(local->mdev);
if (result < 0)
goto fail_rate;
}
- result = ieee80211_wep_init(local);
-
- if (result < 0) {
- printk(KERN_DEBUG "%s: Failed to initialize wep\n",
- wiphy_name(local->hw.wiphy));
- goto fail_wep;
+ /* add one default STA interface if supported */
+ if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_STATION)) {
+ result = ieee80211_if_add(local, "wlan%d", NULL,
+ NL80211_IFTYPE_STATION, NULL);
+ if (result)
+ printk(KERN_WARNING "%s: Failed to add default virtual iface\n",
+ wiphy_name(local->hw.wiphy));
}
- local->mdev->select_queue = ieee80211_select_queue;
-
- /* add one default STA interface */
- result = ieee80211_if_add(local, "wlan%d", NULL,
- IEEE80211_IF_TYPE_STA, NULL);
- if (result)
- printk(KERN_WARNING "%s: Failed to add default virtual iface\n",
- wiphy_name(local->hw.wiphy));
-
rtnl_unlock();
ieee80211_led_init(local);
+ /* alloc internal scan request */
+ i = 0;
+ local->int_scan_req.ssids = &local->scan_ssid;
+ local->int_scan_req.n_ssids = 1;
+ for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+ if (!hw->wiphy->bands[band])
+ continue;
+ for (j = 0; j < hw->wiphy->bands[band]->n_channels; j++) {
+ local->int_scan_req.channels[i] =
+ &hw->wiphy->bands[band]->channels[j];
+ i++;
+ }
+ }
+
+ local->network_latency_notifier.notifier_call =
+ ieee80211_max_network_latency;
+ result = pm_qos_add_notifier(PM_QOS_NETWORK_LATENCY,
+ &local->network_latency_notifier);
+
+ if (result) {
+ rtnl_lock();
+ goto fail_pm_qos;
+ }
+
return 0;
-fail_wep:
- rate_control_deinitialize(local);
-fail_rate:
+ fail_pm_qos:
+ ieee80211_led_exit(local);
+ ieee80211_remove_interfaces(local);
+ fail_rate:
unregister_netdevice(local->mdev);
local->mdev = NULL;
-fail_dev:
+ fail_dev:
rtnl_unlock();
+ ieee80211_wep_free(local);
+ fail_wep:
sta_info_stop(local);
-fail_sta_info:
+ fail_sta_info:
debugfs_hw_del(local);
destroy_workqueue(local->hw.workqueue);
-fail_workqueue:
+ fail_workqueue:
if (local->mdev)
free_netdev(local->mdev);
-fail_mdev_alloc:
+ fail_mdev_alloc:
wiphy_unregister(local->hw.wiphy);
+ fail_wiphy_register:
+ kfree(local->int_scan_req.channels);
return result;
}
EXPORT_SYMBOL(ieee80211_register_hw);
tasklet_kill(&local->tx_pending_tasklet);
tasklet_kill(&local->tasklet);
+ pm_qos_remove_notifier(PM_QOS_NETWORK_LATENCY,
+ &local->network_latency_notifier);
+
rtnl_lock();
/*
rtnl_unlock();
- ieee80211_rx_bss_list_deinit(local);
ieee80211_clear_tx_pending(local);
sta_info_stop(local);
rate_control_deinitialize(local);
ieee80211_wep_free(local);
ieee80211_led_exit(local);
free_netdev(local->mdev);
+ kfree(local->int_scan_req.channels);
}
EXPORT_SYMBOL(ieee80211_unregister_hw);
{
struct ieee80211_local *local = hw_to_local(hw);
+ mutex_destroy(&local->iflist_mtx);
+ mutex_destroy(&local->scan_mtx);
+
wiphy_free(local->hw.wiphy);
}
EXPORT_SYMBOL(ieee80211_free_hw);
BUILD_BUG_ON(sizeof(struct ieee80211_tx_info) > sizeof(skb->cb));
BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, driver_data) +
- IEEE80211_TX_INFO_DRIVER_DATA_SIZE > sizeof(skb->cb));
+ IEEE80211_TX_INFO_DRIVER_DATA_SIZE > sizeof(skb->cb));
+
+ ret = rc80211_minstrel_init();
+ if (ret)
+ return ret;
ret = rc80211_pid_init();
if (ret)
static void __exit ieee80211_exit(void)
{
rc80211_pid_exit();
+ rc80211_minstrel_exit();
/*
* For key todo, it'll be empty by now but the work
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff