#include <linux/skbuff.h>
#include <linux/etherdevice.h>
#include <linux/if_arp.h>
-#include <linux/wireless.h>
#include <linux/rtnetlink.h>
#include <linux/bitmap.h>
#include <linux/pm_qos_params.h>
#include "cfg.h"
#include "debugfs.h"
+
+bool ieee80211_disable_40mhz_24ghz;
+module_param(ieee80211_disable_40mhz_24ghz, bool, 0644);
+MODULE_PARM_DESC(ieee80211_disable_40mhz_24ghz,
+ "Disable 40MHz support in the 2.4GHz band");
+
void ieee80211_configure_filter(struct ieee80211_local *local)
{
u64 mc;
spin_lock_bh(&local->filter_lock);
changed_flags = local->filter_flags ^ new_flags;
- mc = drv_prepare_multicast(local, local->mc_count, local->mc_list);
+ mc = drv_prepare_multicast(local, &local->mc_list);
spin_unlock_bh(&local->filter_lock);
/* be a bit nasty */
if (scan_chan) {
chan = scan_chan;
channel_type = NL80211_CHAN_NO_HT;
+ } else if (local->tmp_channel) {
+ chan = scan_chan = local->tmp_channel;
+ channel_type = local->tmp_channel_type;
} else {
chan = local->oper_channel;
- channel_type = local->oper_channel_type;
+ channel_type = local->_oper_channel_type;
}
if (chan != local->hw.conf.channel ||
changed |= IEEE80211_CONF_CHANGE_CHANNEL;
}
+ if (!conf_is_ht(&local->hw.conf)) {
+ /*
+ * mac80211.h documents that this is only valid
+ * when the channel is set to an HT type, and
+ * that otherwise STATIC is used.
+ */
+ local->hw.conf.smps_mode = IEEE80211_SMPS_STATIC;
+ } else if (local->hw.conf.smps_mode != local->smps_mode) {
+ local->hw.conf.smps_mode = local->smps_mode;
+ changed |= IEEE80211_CONF_CHANGE_SMPS;
+ }
+
if (scan_chan)
power = chan->max_power;
else
}
if (changed & BSS_CHANGED_BEACON_ENABLED) {
- if (local->quiescing || !netif_running(sdata->dev) ||
+ if (local->quiescing || !ieee80211_sdata_running(sdata) ||
test_bit(SCAN_SW_SCANNING, &local->scanning)) {
sdata->vif.bss_conf.enable_beacon = false;
} else {
switch (sdata->vif.type) {
case NL80211_IFTYPE_AP:
sdata->vif.bss_conf.enable_beacon =
- !!rcu_dereference(sdata->u.ap.beacon);
+ !!sdata->u.ap.beacon;
break;
case NL80211_IFTYPE_ADHOC:
sdata->vif.bss_conf.enable_beacon =
- !!rcu_dereference(sdata->u.ibss.presp);
+ !!sdata->u.ibss.presp;
break;
case NL80211_IFTYPE_MESH_POINT:
sdata->vif.bss_conf.enable_beacon = true;
}
}
- drv_bss_info_changed(local, &sdata->vif,
- &sdata->vif.bss_conf, changed);
+ drv_bss_info_changed(local, sdata, &sdata->vif.bss_conf, changed);
}
u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_local *local = hw_to_local(hw);
+ trace_api_restart_hw(local);
+
/* use this reason, __ieee80211_resume will unblock it */
ieee80211_stop_queues_by_reason(hw,
IEEE80211_QUEUE_STOP_REASON_SUSPEND);
}
EXPORT_SYMBOL(ieee80211_restart_hw);
+static void ieee80211_recalc_smps_work(struct work_struct *work)
+{
+ struct ieee80211_local *local =
+ container_of(work, struct ieee80211_local, recalc_smps);
+
+ mutex_lock(&local->iflist_mtx);
+ ieee80211_recalc_smps(local, NULL);
+ mutex_unlock(&local->iflist_mtx);
+}
+
struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
const struct ieee80211_ops *ops)
{
WIPHY_FLAG_4ADDR_STATION;
wiphy->privid = mac80211_wiphy_privid;
- /* Yes, putting cfg80211_bss into ieee80211_bss is a hack */
- wiphy->bss_priv_size = sizeof(struct ieee80211_bss) -
- sizeof(struct cfg80211_bss);
+ wiphy->bss_priv_size = sizeof(struct ieee80211_bss);
local = wiphy_priv(wiphy);
local->hw.conf.long_frame_max_tx_count = wiphy->retry_long;
local->hw.conf.short_frame_max_tx_count = wiphy->retry_short;
local->user_power_level = -1;
+ local->uapsd_queues = IEEE80211_DEFAULT_UAPSD_QUEUES;
+ local->uapsd_max_sp_len = IEEE80211_DEFAULT_MAX_SP_LEN;
INIT_LIST_HEAD(&local->interfaces);
+
+ __hw_addr_init(&local->mc_list);
+
mutex_init(&local->iflist_mtx);
mutex_init(&local->scan_mtx);
INIT_DELAYED_WORK(&local->scan_work, ieee80211_scan_work);
+ ieee80211_work_init(local);
+
INIT_WORK(&local->restart_work, ieee80211_restart_work);
INIT_WORK(&local->reconfig_filter, ieee80211_reconfig_filter);
+ INIT_WORK(&local->recalc_smps, ieee80211_recalc_smps_work);
+ local->smps_mode = IEEE80211_SMPS_OFF;
INIT_WORK(&local->dynamic_ps_enable_work,
ieee80211_dynamic_ps_enable_work);
struct ieee80211_local *local = hw_to_local(hw);
int result;
enum ieee80211_band band;
- int channels, i, j, max_bitrates;
+ int channels, max_bitrates;
bool supp_ht;
static const u32 cipher_suites[] = {
WLAN_CIPHER_SUITE_WEP40,
else if (local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC)
local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_UNSPEC;
+ WARN((local->hw.flags & IEEE80211_HW_SUPPORTS_UAPSD)
+ && (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK),
+ "U-APSD not supported with HW_PS_NULLFUNC_STACK\n");
+
/*
* Calculate scan IE length -- we need this to alloc
* memory and to subtract from the driver limit. It
* and we need some headroom for passing the frame to monitor
* interfaces, but never both at the same time.
*/
+ BUILD_BUG_ON(IEEE80211_TX_STATUS_HEADROOM !=
+ sizeof(struct ieee80211_tx_status_rtap_hdr));
local->tx_headroom = max_t(unsigned int , local->hw.extra_tx_headroom,
sizeof(struct ieee80211_tx_status_rtap_hdr));
debugfs_hw_add(local);
+ /*
+ * if the driver doesn't specify a max listen interval we
+ * use 5 which should be a safe default
+ */
if (local->hw.max_listen_interval == 0)
- local->hw.max_listen_interval = 1;
+ local->hw.max_listen_interval = 5;
local->hw.conf.listen_interval = local->hw.max_listen_interval;
+ local->hw.conf.dynamic_ps_forced_timeout = -1;
+
result = sta_info_start(local);
if (result < 0)
goto fail_sta_info;
ieee80211_led_init(local);
- /* alloc internal scan request */
- i = 0;
- local->int_scan_req->ssids = &local->scan_ssid;
- local->int_scan_req->n_ssids = 1;
- for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
- if (!hw->wiphy->bands[band])
- continue;
- for (j = 0; j < hw->wiphy->bands[band]->n_channels; j++) {
- local->int_scan_req->channels[i] =
- &hw->wiphy->bands[band]->channels[j];
- i++;
- }
- }
- local->int_scan_req->n_channels = i;
-
local->network_latency_notifier.notifier_call =
ieee80211_max_network_latency;
result = pm_qos_add_notifier(PM_QOS_NETWORK_LATENCY,
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff