*/
#include <net/mac80211.h>
-#include <net/ieee80211_radiotap.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <linux/etherdevice.h>
#include <linux/if_arp.h>
-#include <linux/wireless.h>
#include <linux/rtnetlink.h>
#include <linux/bitmap.h>
#include <linux/pm_qos_params.h>
#include "rate.h"
#include "mesh.h"
#include "wep.h"
-#include "wme.h"
-#include "aes_ccm.h"
#include "led.h"
#include "cfg.h"
#include "debugfs.h"
-#include "debugfs_netdev.h"
-/*
- * For seeing transmitted packets on monitor interfaces
- * we have a radiotap header too.
- */
-struct ieee80211_tx_status_rtap_hdr {
- struct ieee80211_radiotap_header hdr;
- u8 rate;
- u8 padding_for_rate;
- __le16 tx_flags;
- u8 data_retries;
-} __attribute__ ((packed));
+bool ieee80211_disable_40mhz_24ghz;
+module_param(ieee80211_disable_40mhz_24ghz, bool, 0644);
+MODULE_PARM_DESC(ieee80211_disable_40mhz_24ghz,
+ "Disable 40MHz support in the 2.4GHz band");
void ieee80211_configure_filter(struct ieee80211_local *local)
{
if (scan_chan) {
chan = scan_chan;
channel_type = NL80211_CHAN_NO_HT;
+ } else if (local->tmp_channel) {
+ chan = scan_chan = local->tmp_channel;
+ channel_type = local->tmp_channel_type;
} else {
chan = local->oper_channel;
channel_type = local->oper_channel_type;
changed |= IEEE80211_CONF_CHANGE_CHANNEL;
}
+ if (!conf_is_ht(&local->hw.conf)) {
+ /*
+ * mac80211.h documents that this is only valid
+ * when the channel is set to an HT type, and
+ * that otherwise STATIC is used.
+ */
+ local->hw.conf.smps_mode = IEEE80211_SMPS_STATIC;
+ } else if (local->hw.conf.smps_mode != local->smps_mode) {
+ local->hw.conf.smps_mode = local->smps_mode;
+ changed |= IEEE80211_CONF_CHANGE_SMPS;
+ }
+
if (scan_chan)
power = chan->max_power;
else
} else if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
sdata->vif.bss_conf.bssid = sdata->u.ibss.bssid;
else if (sdata->vif.type == NL80211_IFTYPE_AP)
- sdata->vif.bss_conf.bssid = sdata->dev->dev_addr;
+ sdata->vif.bss_conf.bssid = sdata->vif.addr;
else if (ieee80211_vif_is_mesh(&sdata->vif)) {
sdata->vif.bss_conf.bssid = zero;
} else {
}
if (changed & BSS_CHANGED_BEACON_ENABLED) {
- if (local->quiescing || !netif_running(sdata->dev) ||
+ if (local->quiescing || !ieee80211_sdata_running(sdata) ||
test_bit(SCAN_SW_SCANNING, &local->scanning)) {
sdata->vif.bss_conf.enable_beacon = false;
} else {
}
}
- drv_bss_info_changed(local, &sdata->vif,
- &sdata->vif.bss_conf, changed);
+ drv_bss_info_changed(local, sdata, &sdata->vif.bss_conf, changed);
}
u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata)
BSS_CHANGED_ERP_SLOT;
}
-void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw,
- struct sk_buff *skb)
-{
- struct ieee80211_local *local = hw_to_local(hw);
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
- int tmp;
-
- skb->pkt_type = IEEE80211_TX_STATUS_MSG;
- skb_queue_tail(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS ?
- &local->skb_queue : &local->skb_queue_unreliable, skb);
- tmp = skb_queue_len(&local->skb_queue) +
- skb_queue_len(&local->skb_queue_unreliable);
- while (tmp > IEEE80211_IRQSAFE_QUEUE_LIMIT &&
- (skb = skb_dequeue(&local->skb_queue_unreliable))) {
- dev_kfree_skb_irq(skb);
- tmp--;
- I802_DEBUG_INC(local->tx_status_drop);
- }
- tasklet_schedule(&local->tasklet);
-}
-EXPORT_SYMBOL(ieee80211_tx_status_irqsafe);
-
static void ieee80211_tasklet_handler(unsigned long data)
{
struct ieee80211_local *local = (struct ieee80211_local *) data;
break;
case IEEE80211_DELBA_MSG:
ra_tid = (struct ieee80211_ra_tid *) &skb->cb;
- ieee80211_stop_tx_ba_cb(local_to_hw(local),
- ra_tid->ra, ra_tid->tid);
+ ieee80211_stop_tx_ba_cb(ra_tid->vif, ra_tid->ra,
+ ra_tid->tid);
dev_kfree_skb(skb);
break;
case IEEE80211_ADDBA_MSG:
ra_tid = (struct ieee80211_ra_tid *) &skb->cb;
- ieee80211_start_tx_ba_cb(local_to_hw(local),
- ra_tid->ra, ra_tid->tid);
+ ieee80211_start_tx_ba_cb(ra_tid->vif, ra_tid->ra,
+ ra_tid->tid);
dev_kfree_skb(skb);
break ;
default:
}
}
-static void ieee80211_handle_filtered_frame(struct ieee80211_local *local,
- struct sta_info *sta,
- struct sk_buff *skb)
-{
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-
- /*
- * XXX: This is temporary!
- *
- * The problem here is that when we get here, the driver will
- * quite likely have pretty much overwritten info->control by
- * using info->driver_data or info->rate_driver_data. Thus,
- * when passing out the frame to the driver again, we would be
- * passing completely bogus data since the driver would then
- * expect a properly filled info->control. In mac80211 itself
- * the same problem occurs, since we need info->control.vif
- * internally.
- *
- * To fix this, we should send the frame through TX processing
- * again. However, it's not that simple, since the frame will
- * have been software-encrypted (if applicable) already, and
- * encrypting it again doesn't do much good. So to properly do
- * that, we not only have to skip the actual 'raw' encryption
- * (key selection etc. still has to be done!) but also the
- * sequence number assignment since that impacts the crypto
- * encapsulation, of course.
- *
- * Hence, for now, fix the bug by just dropping the frame.
- */
- goto drop;
-
- sta->tx_filtered_count++;
-
- /*
- * Clear the TX filter mask for this STA when sending the next
- * packet. If the STA went to power save mode, this will happen
- * when it wakes up for the next time.
- */
- set_sta_flags(sta, WLAN_STA_CLEAR_PS_FILT);
-
- /*
- * This code races in the following way:
- *
- * (1) STA sends frame indicating it will go to sleep and does so
- * (2) hardware/firmware adds STA to filter list, passes frame up
- * (3) hardware/firmware processes TX fifo and suppresses a frame
- * (4) we get TX status before having processed the frame and
- * knowing that the STA has gone to sleep.
- *
- * This is actually quite unlikely even when both those events are
- * processed from interrupts coming in quickly after one another or
- * even at the same time because we queue both TX status events and
- * RX frames to be processed by a tasklet and process them in the
- * same order that they were received or TX status last. Hence, there
- * is no race as long as the frame RX is processed before the next TX
- * status, which drivers can ensure, see below.
- *
- * Note that this can only happen if the hardware or firmware can
- * actually add STAs to the filter list, if this is done by the
- * driver in response to set_tim() (which will only reduce the race
- * this whole filtering tries to solve, not completely solve it)
- * this situation cannot happen.
- *
- * To completely solve this race drivers need to make sure that they
- * (a) don't mix the irq-safe/not irq-safe TX status/RX processing
- * functions and
- * (b) always process RX events before TX status events if ordering
- * can be unknown, for example with different interrupt status
- * bits.
- */
- if (test_sta_flags(sta, WLAN_STA_PS_STA) &&
- skb_queue_len(&sta->tx_filtered) < STA_MAX_TX_BUFFER) {
- skb_queue_tail(&sta->tx_filtered, skb);
- return;
- }
-
- if (!test_sta_flags(sta, WLAN_STA_PS_STA) &&
- !(info->flags & IEEE80211_TX_INTFL_RETRIED)) {
- /* Software retry the packet once */
- info->flags |= IEEE80211_TX_INTFL_RETRIED;
- ieee80211_add_pending_skb(local, skb);
- return;
- }
-
- drop:
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
- if (net_ratelimit())
- printk(KERN_DEBUG "%s: dropped TX filtered frame, "
- "queue_len=%d PS=%d @%lu\n",
- wiphy_name(local->hw.wiphy),
- skb_queue_len(&sta->tx_filtered),
- !!test_sta_flags(sta, WLAN_STA_PS_STA), jiffies);
-#endif
- dev_kfree_skb(skb);
-}
-
-void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb)
-{
- struct sk_buff *skb2;
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
- struct ieee80211_local *local = hw_to_local(hw);
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
- u16 frag, type;
- __le16 fc;
- struct ieee80211_supported_band *sband;
- struct ieee80211_tx_status_rtap_hdr *rthdr;
- struct ieee80211_sub_if_data *sdata;
- struct net_device *prev_dev = NULL;
- struct sta_info *sta;
- int retry_count = -1, i;
-
- for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
- /* the HW cannot have attempted that rate */
- if (i >= hw->max_rates) {
- info->status.rates[i].idx = -1;
- info->status.rates[i].count = 0;
- }
-
- retry_count += info->status.rates[i].count;
- }
- if (retry_count < 0)
- retry_count = 0;
-
- rcu_read_lock();
-
- sband = local->hw.wiphy->bands[info->band];
-
- sta = sta_info_get(local, hdr->addr1);
-
- if (sta) {
- if (!(info->flags & IEEE80211_TX_STAT_ACK) &&
- test_sta_flags(sta, WLAN_STA_PS_STA)) {
- /*
- * The STA is in power save mode, so assume
- * that this TX packet failed because of that.
- */
- ieee80211_handle_filtered_frame(local, sta, skb);
- rcu_read_unlock();
- return;
- }
-
- fc = hdr->frame_control;
-
- if ((info->flags & IEEE80211_TX_STAT_AMPDU_NO_BACK) &&
- (ieee80211_is_data_qos(fc))) {
- u16 tid, ssn;
- u8 *qc;
-
- qc = ieee80211_get_qos_ctl(hdr);
- tid = qc[0] & 0xf;
- ssn = ((le16_to_cpu(hdr->seq_ctrl) + 0x10)
- & IEEE80211_SCTL_SEQ);
- ieee80211_send_bar(sta->sdata, hdr->addr1,
- tid, ssn);
- }
-
- if (info->flags & IEEE80211_TX_STAT_TX_FILTERED) {
- ieee80211_handle_filtered_frame(local, sta, skb);
- rcu_read_unlock();
- return;
- } else {
- if (!(info->flags & IEEE80211_TX_STAT_ACK))
- sta->tx_retry_failed++;
- sta->tx_retry_count += retry_count;
- }
-
- rate_control_tx_status(local, sband, sta, skb);
- if (ieee80211_vif_is_mesh(&sta->sdata->vif))
- ieee80211s_update_metric(local, sta, skb);
- }
-
- rcu_read_unlock();
-
- ieee80211_led_tx(local, 0);
-
- /* SNMP counters
- * Fragments are passed to low-level drivers as separate skbs, so these
- * are actually fragments, not frames. Update frame counters only for
- * the first fragment of the frame. */
-
- frag = le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG;
- type = le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_FTYPE;
-
- if (info->flags & IEEE80211_TX_STAT_ACK) {
- if (frag == 0) {
- local->dot11TransmittedFrameCount++;
- if (is_multicast_ether_addr(hdr->addr1))
- local->dot11MulticastTransmittedFrameCount++;
- if (retry_count > 0)
- local->dot11RetryCount++;
- if (retry_count > 1)
- local->dot11MultipleRetryCount++;
- }
-
- /* This counter shall be incremented for an acknowledged MPDU
- * with an individual address in the address 1 field or an MPDU
- * with a multicast address in the address 1 field of type Data
- * or Management. */
- if (!is_multicast_ether_addr(hdr->addr1) ||
- type == IEEE80211_FTYPE_DATA ||
- type == IEEE80211_FTYPE_MGMT)
- local->dot11TransmittedFragmentCount++;
- } else {
- if (frag == 0)
- local->dot11FailedCount++;
- }
-
- /* this was a transmitted frame, but now we want to reuse it */
- skb_orphan(skb);
-
- /*
- * This is a bit racy but we can avoid a lot of work
- * with this test...
- */
- if (!local->monitors && !local->cooked_mntrs) {
- dev_kfree_skb(skb);
- return;
- }
-
- /* send frame to monitor interfaces now */
-
- if (skb_headroom(skb) < sizeof(*rthdr)) {
- printk(KERN_ERR "ieee80211_tx_status: headroom too small\n");
- dev_kfree_skb(skb);
- return;
- }
-
- rthdr = (struct ieee80211_tx_status_rtap_hdr *)
- skb_push(skb, sizeof(*rthdr));
-
- memset(rthdr, 0, sizeof(*rthdr));
- rthdr->hdr.it_len = cpu_to_le16(sizeof(*rthdr));
- rthdr->hdr.it_present =
- cpu_to_le32((1 << IEEE80211_RADIOTAP_TX_FLAGS) |
- (1 << IEEE80211_RADIOTAP_DATA_RETRIES) |
- (1 << IEEE80211_RADIOTAP_RATE));
-
- if (!(info->flags & IEEE80211_TX_STAT_ACK) &&
- !is_multicast_ether_addr(hdr->addr1))
- rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_FAIL);
-
- /*
- * XXX: Once radiotap gets the bitmap reset thing the vendor
- * extensions proposal contains, we can actually report
- * the whole set of tries we did.
- */
- if ((info->status.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) ||
- (info->status.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT))
- rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_CTS);
- else if (info->status.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS)
- rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_RTS);
- if (info->status.rates[0].idx >= 0 &&
- !(info->status.rates[0].flags & IEEE80211_TX_RC_MCS))
- rthdr->rate = sband->bitrates[
- info->status.rates[0].idx].bitrate / 5;
-
- /* for now report the total retry_count */
- rthdr->data_retries = retry_count;
-
- /* XXX: is this sufficient for BPF? */
- skb_set_mac_header(skb, 0);
- skb->ip_summed = CHECKSUM_UNNECESSARY;
- skb->pkt_type = PACKET_OTHERHOST;
- skb->protocol = htons(ETH_P_802_2);
- memset(skb->cb, 0, sizeof(skb->cb));
-
- rcu_read_lock();
- list_for_each_entry_rcu(sdata, &local->interfaces, list) {
- if (sdata->vif.type == NL80211_IFTYPE_MONITOR) {
- if (!netif_running(sdata->dev))
- continue;
-
- if (prev_dev) {
- skb2 = skb_clone(skb, GFP_ATOMIC);
- if (skb2) {
- skb2->dev = prev_dev;
- netif_rx(skb2);
- }
- }
-
- prev_dev = sdata->dev;
- }
- }
- if (prev_dev) {
- skb->dev = prev_dev;
- netif_rx(skb);
- skb = NULL;
- }
- rcu_read_unlock();
- dev_kfree_skb(skb);
-}
-EXPORT_SYMBOL(ieee80211_tx_status);
-
static void ieee80211_restart_work(struct work_struct *work)
{
struct ieee80211_local *local =
}
EXPORT_SYMBOL(ieee80211_restart_hw);
+static void ieee80211_recalc_smps_work(struct work_struct *work)
+{
+ struct ieee80211_local *local =
+ container_of(work, struct ieee80211_local, recalc_smps);
+
+ mutex_lock(&local->iflist_mtx);
+ ieee80211_recalc_smps(local, NULL);
+ mutex_unlock(&local->iflist_mtx);
+}
+
struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
const struct ieee80211_ops *ops)
{
if (!wiphy)
return NULL;
- wiphy->netnsok = true;
+ wiphy->flags |= WIPHY_FLAG_NETNS_OK |
+ WIPHY_FLAG_4ADDR_AP |
+ WIPHY_FLAG_4ADDR_STATION;
wiphy->privid = mac80211_wiphy_privid;
- /* Yes, putting cfg80211_bss into ieee80211_bss is a hack */
- wiphy->bss_priv_size = sizeof(struct ieee80211_bss) -
- sizeof(struct cfg80211_bss);
+ wiphy->bss_priv_size = sizeof(struct ieee80211_bss);
local = wiphy_priv(wiphy);
local->hw.conf.long_frame_max_tx_count = wiphy->retry_long;
local->hw.conf.short_frame_max_tx_count = wiphy->retry_short;
local->user_power_level = -1;
+ local->uapsd_queues = IEEE80211_DEFAULT_UAPSD_QUEUES;
+ local->uapsd_max_sp_len = IEEE80211_DEFAULT_MAX_SP_LEN;
INIT_LIST_HEAD(&local->interfaces);
mutex_init(&local->iflist_mtx);
INIT_DELAYED_WORK(&local->scan_work, ieee80211_scan_work);
+ ieee80211_work_init(local);
+
INIT_WORK(&local->restart_work, ieee80211_restart_work);
INIT_WORK(&local->reconfig_filter, ieee80211_reconfig_filter);
+ INIT_WORK(&local->recalc_smps, ieee80211_recalc_smps_work);
+ local->smps_mode = IEEE80211_SMPS_OFF;
INIT_WORK(&local->dynamic_ps_enable_work,
ieee80211_dynamic_ps_enable_work);
else if (local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC)
local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_UNSPEC;
+ WARN((local->hw.flags & IEEE80211_HW_SUPPORTS_UAPSD)
+ && (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK),
+ "U-APSD not supported with HW_PS_NULLFUNC_STACK\n");
+
/*
* Calculate scan IE length -- we need this to alloc
* memory and to subtract from the driver limit. It
* and we need some headroom for passing the frame to monitor
* interfaces, but never both at the same time.
*/
+ BUILD_BUG_ON(IEEE80211_TX_STATUS_HEADROOM !=
+ sizeof(struct ieee80211_tx_status_rtap_hdr));
local->tx_headroom = max_t(unsigned int , local->hw.extra_tx_headroom,
sizeof(struct ieee80211_tx_status_rtap_hdr));
debugfs_hw_add(local);
+ /*
+ * if the driver doesn't specify a max listen interval we
+ * use 5 which should be a safe default
+ */
if (local->hw.max_listen_interval == 0)
- local->hw.max_listen_interval = 1;
+ local->hw.max_listen_interval = 5;
local->hw.conf.listen_interval = local->hw.max_listen_interval;
sta_info_stop(local);
rate_control_deinitialize(local);
- if (skb_queue_len(&local->skb_queue)
- || skb_queue_len(&local->skb_queue_unreliable))
+ if (skb_queue_len(&local->skb_queue) ||
+ skb_queue_len(&local->skb_queue_unreliable))
printk(KERN_WARNING "%s: skb_queue not empty\n",
wiphy_name(local->hw.wiphy));
skb_queue_purge(&local->skb_queue);
ret = rc80211_pid_init();
if (ret)
- return ret;
+ goto err_pid;
- ieee80211_debugfs_netdev_init();
+ ret = ieee80211_iface_init();
+ if (ret)
+ goto err_netdev;
return 0;
+ err_netdev:
+ rc80211_pid_exit();
+ err_pid:
+ rc80211_minstrel_exit();
+
+ return ret;
}
static void __exit ieee80211_exit(void)
if (mesh_allocated)
ieee80211s_stop();
- ieee80211_debugfs_netdev_exit();
+ ieee80211_iface_exit();
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff