intend to participate in the MBONE, a high bandwidth network on top
of the Internet which carries audio and video broadcasts. More
information about the MBONE is on the WWW at
- <http://www-itg.lbl.gov/mbone/>. Information about the multicast
+ <http://www.savetz.com/mbone/>. Information about the multicast
capabilities of the various network cards is contained in
<file:Documentation/networking/multicast.txt>. For most people, it's
safe to say N.
at boot time after the /proc file system has been mounted.
- If you turn on IP forwarding, you will also get the rp_filter, which
+ If you turn on IP forwarding, you should consider the rp_filter, which
automatically rejects incoming packets if the routing table entry
for their source address doesn't match the network interface they're
arriving on. This has security advantages because it prevents the
asymmetric routing (packets from you to a host take a different path
than packets from that host to you) or if you operate a non-routing
host which has several IP addresses on different interfaces. To turn
- rp_filter off use:
+ rp_filter on use:
- echo 0 > /proc/sys/net/ipv4/conf/<device>/rp_filter
- or
- echo 0 > /proc/sys/net/ipv4/conf/all/rp_filter
+ echo 1 > /proc/sys/net/ipv4/conf/<device>/rp_filter
+ and
+ echo 1 > /proc/sys/net/ipv4/conf/all/rp_filter
+
+ Note that some distributions enable it in startup scripts.
+ For details about rp_filter strict and loose mode read
+ <file:Documentation/networking/ip-sysctl.txt>.
If unsure, say N here.
-choice
+choice
prompt "Choose IP: FIB lookup algorithm (choose FIB_HASH if unsure)"
depends on IP_ADVANCED_ROUTER
default ASK_IP_FIB_HASH
config ASK_IP_FIB_HASH
bool "FIB_HASH"
---help---
- Current FIB is very proven and good enough for most users.
+ Current FIB is very proven and good enough for most users.
config IP_FIB_TRIE
bool "FIB_TRIE"
---help---
- Use new experimental LC-trie as FIB lookup algoritm.
- This improves lookup performance if you have a large
- number of routes.
-
- LC-trie is a longest matching prefix lookup algorithm which
- performs better than FIB_HASH for large routing tables.
- But, it consumes more memory and is more complex.
-
- LC-trie is described in:
-
- IP-address lookup using LC-tries. Stefan Nilsson and Gunnar Karlsson
- IEEE Journal on Selected Areas in Communications, 17(6):1083-1092, June 1999
- An experimental study of compression methods for dynamic tries
- Stefan Nilsson and Matti Tikkanen. Algorithmica, 33(1):19-33, 2002.
- http://www.nada.kth.se/~snilsson/public/papers/dyntrie2/
-
+ Use new experimental LC-trie as FIB lookup algorithm.
+ This improves lookup performance if you have a large
+ number of routes.
+
+ LC-trie is a longest matching prefix lookup algorithm which
+ performs better than FIB_HASH for large routing tables.
+ But, it consumes more memory and is more complex.
+
+ LC-trie is described in:
+
+ IP-address lookup using LC-tries. Stefan Nilsson and Gunnar Karlsson
+ IEEE Journal on Selected Areas in Communications, 17(6):1083-1092,
+ June 1999
+
+ An experimental study of compression methods for dynamic tries
+ Stefan Nilsson and Matti Tikkanen. Algorithmica, 33(1):19-33, 2002.
+ http://www.nada.kth.se/~snilsson/public/papers/dyntrie2/
+
endchoice
config IP_FIB_HASH
def_bool ASK_IP_FIB_HASH || !IP_ADVANCED_ROUTER
+config IP_FIB_TRIE_STATS
+ bool "FIB TRIE statistics"
+ depends on IP_FIB_TRIE
+ ---help---
+ Keep track of statistics on structure of FIB TRIE table.
+ Useful for testing and measuring TRIE performance.
+
config IP_MULTIPLE_TABLES
bool "IP: policy routing"
depends on IP_ADVANCED_ROUTER
+ select FIB_RULES
---help---
Normally, a router decides what to do with a received packet based
solely on the packet's final destination address. If you say Y here,
If unsure, say N.
-config IP_ROUTE_FWMARK
- bool "IP: use netfilter MARK value as routing key"
- depends on IP_MULTIPLE_TABLES && NETFILTER
- help
- If you say Y here, you will be able to specify different routes for
- packets with different mark values (see iptables(8), MARK target).
-
config IP_ROUTE_MULTIPATH
bool "IP: equal cost multipath"
depends on IP_ADVANCED_ROUTER
equal "cost" and chooses one of them in a non-deterministic fashion
if a matching packet arrives.
-config IP_ROUTE_MULTIPATH_CACHED
- bool "IP: equal cost multipath with caching support (EXPERIMENTAL)"
- depends on: IP_ROUTE_MULTIPATH
- help
- Normally, equal cost multipath routing is not supported by the
- routing cache. If you say Y here, alternative routes are cached
- and on cache lookup a route is chosen in a configurable fashion.
-
- If unsure, say N.
-
-config IP_ROUTE_MULTIPATH_RR
- tristate "MULTIPATH: round robin algorithm"
- depends on IP_ROUTE_MULTIPATH_CACHED
- help
- Mulitpath routes are chosen according to Round Robin
-
-config IP_ROUTE_MULTIPATH_RANDOM
- tristate "MULTIPATH: random algorithm"
- depends on IP_ROUTE_MULTIPATH_CACHED
- help
- Multipath routes are chosen in a random fashion. Actually,
- there is no weight for a route. The advantage of this policy
- is that it is implemented stateless and therefore introduces only
- a very small delay.
-
-config IP_ROUTE_MULTIPATH_WRANDOM
- tristate "MULTIPATH: weighted random algorithm"
- depends on IP_ROUTE_MULTIPATH_CACHED
- help
- Multipath routes are chosen in a weighted random fashion.
- The per route weights are the weights visible via ip route 2. As the
- corresponding state management introduces some overhead routing delay
- is increased.
-
-config IP_ROUTE_MULTIPATH_DRR
- tristate "MULTIPATH: interface round robin algorithm"
- depends on IP_ROUTE_MULTIPATH_CACHED
- help
- Connections are distributed in a round robin fashion over the
- available interfaces. This policy makes sense if the connections
- should be primarily distributed on interfaces and not on routes.
-
config IP_ROUTE_VERBOSE
bool "IP: verbose route monitoring"
depends on IP_ADVANCED_ROUTER
If unsure, say Y. Note that if you want to use DHCP, a DHCP server
must be operating on your network. Read
- <file:Documentation/nfsroot.txt> for details.
+ <file:Documentation/filesystems/nfsroot.txt> for details.
config IP_PNP_BOOTP
bool "IP: BOOTP support"
does BOOTP itself, providing all necessary information on the kernel
command line, you can say N here. If unsure, say Y. Note that if you
want to use BOOTP, a BOOTP server must be operating on your network.
- Read <file:Documentation/nfsroot.txt> for details.
+ Read <file:Documentation/filesystems/nfsroot.txt> for details.
config IP_PNP_RARP
bool "IP: RARP support"
discovered automatically at boot time using the RARP protocol (an
older protocol which is being obsoleted by BOOTP and DHCP), say Y
here. Note that if you want to use RARP, a RARP server must be
- operating on your network. Read <file:Documentation/nfsroot.txt> for
- details.
+ operating on your network. Read
+ <file:Documentation/filesystems/nfsroot.txt> for details.
# not yet ready..
-# bool ' IP: ARP support' CONFIG_IP_PNP_ARP
+# bool ' IP: ARP support' CONFIG_IP_PNP_ARP
config NET_IPIP
tristate "IP: tunneling"
+ select INET_TUNNEL
---help---
Tunneling means encapsulating data of one protocol type within
another protocol and sending it over a channel that understands the
you want to play with it.
config ARPD
- bool "IP: ARP daemon support (EXPERIMENTAL)"
- depends on EXPERIMENTAL
+ bool "IP: ARP daemon support"
---help---
- Normally, the kernel maintains an internal cache which maps IP
- addresses to hardware addresses on the local network, so that
- Ethernet/Token Ring/ etc. frames are sent to the proper address on
- the physical networking layer. For small networks having a few
- hundred directly connected hosts or less, keeping this address
- resolution (ARP) cache inside the kernel works well. However,
- maintaining an internal ARP cache does not work well for very large
- switched networks, and will use a lot of kernel memory if TCP/IP
- connections are made to many machines on the network.
-
- If you say Y here, the kernel's internal ARP cache will never grow
- to more than 256 entries (the oldest entries are expired in a LIFO
- manner) and communication will be attempted with the user space ARP
- daemon arpd. Arpd then answers the address resolution request either
- from its own cache or by asking the net.
-
- This code is experimental and also obsolete. If you want to use it,
- you need to find a version of the daemon arpd on the net somewhere,
- and you should also say Y to "Kernel/User network link driver",
- below. If unsure, say N.
+ The kernel maintains an internal cache which maps IP addresses to
+ hardware addresses on the local network, so that Ethernet/Token Ring/
+ etc. frames are sent to the proper address on the physical networking
+ layer. Normally, kernel uses the ARP protocol to resolve these
+ mappings.
+
+ Saying Y here adds support to have an user space daemon to do this
+ resolution instead. This is useful for implementing an alternate
+ address resolution protocol (e.g. NHRP on mGRE tunnels) and also for
+ testing purposes.
+
+ If unsure, say N.
config SYN_COOKIES
bool "IP: TCP syncookie support (disabled per default)"
tristate "IP: ESP transformation"
select XFRM
select CRYPTO
+ select CRYPTO_AUTHENC
select CRYPTO_HMAC
select CRYPTO_MD5
+ select CRYPTO_CBC
select CRYPTO_SHA1
select CRYPTO_DES
---help---
config INET_IPCOMP
tristate "IP: IPComp transformation"
- select XFRM
- select INET_TUNNEL
- select CRYPTO
- select CRYPTO_DEFLATE
+ select INET_XFRM_TUNNEL
+ select XFRM_IPCOMP
---help---
Support for IP Payload Compression Protocol (IPComp) (RFC3173),
typically needed for IPsec.
-
+
If unsure, say Y.
+config INET_XFRM_TUNNEL
+ tristate
+ select INET_TUNNEL
+ default n
+
config INET_TUNNEL
- tristate "IP: tunnel transformation"
+ tristate
+ default n
+
+config INET_XFRM_MODE_TRANSPORT
+ tristate "IP: IPsec transport mode"
+ default y
+ select XFRM
+ ---help---
+ Support for IPsec transport mode.
+
+ If unsure, say Y.
+
+config INET_XFRM_MODE_TUNNEL
+ tristate "IP: IPsec tunnel mode"
+ default y
select XFRM
---help---
- Support for generic IP tunnel transformation, which is required by
- the IP tunneling module as well as tunnel mode IPComp.
-
+ Support for IPsec tunnel mode.
+
If unsure, say Y.
-config IP_TCPDIAG
- tristate "IP: TCP socket monitoring interface"
+config INET_XFRM_MODE_BEET
+ tristate "IP: IPsec BEET mode"
default y
+ select XFRM
---help---
- Support for TCP socket monitoring interface used by native Linux
- tools such as ss. ss is included in iproute2, currently downloadable
- at <http://developer.osdl.org/dev/iproute2>. If you want IPv6 support
- and have selected IPv6 as a module, you need to build this as a
- module too.
-
+ Support for IPsec BEET mode.
+
If unsure, say Y.
-config IP_TCPDIAG_IPV6
- def_bool (IP_TCPDIAG=y && IPV6=y) || (IP_TCPDIAG=m && IPV6)
+config INET_LRO
+ bool "Large Receive Offload (ipv4/tcp)"
+ default y
+ ---help---
+ Support for Large Receive Offload (ipv4/tcp).
-config TCP_CONG_ADVANCED
+ If unsure, say Y.
+
+config INET_DIAG
+ tristate "INET: socket monitoring interface"
+ default y
+ ---help---
+ Support for INET (TCP, DCCP, etc) socket monitoring interface used by
+ native Linux tools such as ss. ss is included in iproute2, currently
+ downloadable at <http://linux-net.osdl.org/index.php/Iproute2>.
+
+ If unsure, say Y.
+
+config INET_TCP_DIAG
+ depends on INET_DIAG
+ def_tristate INET_DIAG
+
+menuconfig TCP_CONG_ADVANCED
bool "TCP: advanced congestion control"
---help---
Support for selection of various TCP congestion control
modules.
Nearly all users can safely say no here, and a safe default
- selection will be made (BIC-TCP with new Reno as a fallback).
+ selection will be made (CUBIC with new Reno as a fallback).
If unsure, say N.
-# TCP Reno is builtin (required as fallback)
-menu "TCP congestion control"
- depends on TCP_CONG_ADVANCED
+if TCP_CONG_ADVANCED
config TCP_CONG_BIC
tristate "Binary Increase Congestion (BIC) control"
- default y
+ default m
---help---
BIC-TCP is a sender-side only change that ensures a linear RTT
fairness under large windows while offering both scalability and
increase provides TCP friendliness.
See http://www.csc.ncsu.edu/faculty/rhee/export/bitcp/
+config TCP_CONG_CUBIC
+ tristate "CUBIC TCP"
+ default y
+ ---help---
+ This is version 2.0 of BIC-TCP which uses a cubic growth function
+ among other techniques.
+ See http://www.csc.ncsu.edu/faculty/rhee/export/bitcp/cubic-paper.pdf
+
config TCP_CONG_WESTWOOD
tristate "TCP Westwood+"
default m
---help---
TCP-Hybla is a sender-side only change that eliminates penalization of
long-RTT, large-bandwidth connections, like when satellite legs are
- involved, expecially when sharing a common bottleneck with normal
+ involved, especially when sharing a common bottleneck with normal
terrestrial connections.
config TCP_CONG_VEGAS
Scalable TCP is a sender-side only change to TCP which uses a
MIMD congestion control algorithm which has some nice scaling
properties, though is known to have fairness issues.
- See http://www-lce.eng.cam.ac.uk/~ctk21/scalable/
+ See http://www.deneholme.net/tom/scalable/
-endmenu
+config TCP_CONG_LP
+ tristate "TCP Low Priority"
+ depends on EXPERIMENTAL
+ default n
+ ---help---
+ TCP Low Priority (TCP-LP), a distributed algorithm whose goal is
+ to utilize only the excess network bandwidth as compared to the
+ ``fair share`` of bandwidth as targeted by TCP.
+ See http://www-ece.rice.edu/networks/TCP-LP/
-config TCP_CONG_BIC
+config TCP_CONG_VENO
+ tristate "TCP Veno"
+ depends on EXPERIMENTAL
+ default n
+ ---help---
+ TCP Veno is a sender-side only enhancement of TCP to obtain better
+ throughput over wireless networks. TCP Veno makes use of state
+ distinguishing to circumvent the difficult judgment of the packet loss
+ type. TCP Veno cuts down less congestion window in response to random
+ loss packets.
+ See http://www.ntu.edu.sg/home5/ZHOU0022/papers/CPFu03a.pdf
+
+config TCP_CONG_YEAH
+ tristate "YeAH TCP"
+ depends on EXPERIMENTAL
+ select TCP_CONG_VEGAS
+ default n
+ ---help---
+ YeAH-TCP is a sender-side high-speed enabled TCP congestion control
+ algorithm, which uses a mixed loss/delay approach to compute the
+ congestion window. It's design goals target high efficiency,
+ internal, RTT and Reno fairness, resilience to link loss while
+ keeping network elements load as low as possible.
+
+ For further details look here:
+ http://wil.cs.caltech.edu/pfldnet2007/paper/YeAH_TCP.pdf
+
+config TCP_CONG_ILLINOIS
+ tristate "TCP Illinois"
+ depends on EXPERIMENTAL
+ default n
+ ---help---
+ TCP-Illinois is a sender-side modification of TCP Reno for
+ high speed long delay links. It uses round-trip-time to
+ adjust the alpha and beta parameters to achieve a higher average
+ throughput and maintain fairness.
+
+ For further details see:
+ http://www.ews.uiuc.edu/~shaoliu/tcpillinois/index.html
+
+choice
+ prompt "Default TCP congestion control"
+ default DEFAULT_CUBIC
+ help
+ Select the TCP congestion control that will be used by default
+ for all connections.
+
+ config DEFAULT_BIC
+ bool "Bic" if TCP_CONG_BIC=y
+
+ config DEFAULT_CUBIC
+ bool "Cubic" if TCP_CONG_CUBIC=y
+
+ config DEFAULT_HTCP
+ bool "Htcp" if TCP_CONG_HTCP=y
+
+ config DEFAULT_VEGAS
+ bool "Vegas" if TCP_CONG_VEGAS=y
+
+ config DEFAULT_WESTWOOD
+ bool "Westwood" if TCP_CONG_WESTWOOD=y
+
+ config DEFAULT_RENO
+ bool "Reno"
+
+endchoice
+
+endif
+
+config TCP_CONG_CUBIC
tristate
depends on !TCP_CONG_ADVANCED
default y
-source "net/ipv4/ipvs/Kconfig"
+config DEFAULT_TCP_CONG
+ string
+ default "bic" if DEFAULT_BIC
+ default "cubic" if DEFAULT_CUBIC
+ default "htcp" if DEFAULT_HTCP
+ default "vegas" if DEFAULT_VEGAS
+ default "westwood" if DEFAULT_WESTWOOD
+ default "reno" if DEFAULT_RENO
+ default "cubic"
+
+config TCP_MD5SIG
+ bool "TCP: MD5 Signature Option support (RFC2385) (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ select CRYPTO
+ select CRYPTO_MD5
+ ---help---
+ RFC2385 specifies a method of giving MD5 protection to TCP sessions.
+ Its main (only?) use is to protect BGP sessions between core routers
+ on the Internet.
+
+ If unsure, say N.