* Authors: Lawrence V. Stefani, <stefani@lkg.dec.com>
*
* fddi.c is based on previous eth.c and tr.c work by
- * Ross Biro, <bir7@leland.Stanford.Edu>
+ * Ross Biro
* Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
* Mark Evans, <evansmp@uhura.aston.ac.uk>
* Florian La Roche, <rzsfl@rz.uni-sb.de>
* Alan Cox, <gw4pts@gw4pts.ampr.org>
- *
+ *
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* Alan Cox : New arp/rebuild header
* Maciej W. Rozycki : IPv6 support
*/
-
-#include <linux/config.h>
+
#include <linux/module.h>
#include <asm/system.h>
#include <linux/types.h>
#include <linux/kernel.h>
-#include <linux/sched.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/socket.h>
static int fddi_header(struct sk_buff *skb, struct net_device *dev,
unsigned short type,
- void *daddr, void *saddr, unsigned len)
+ const void *daddr, const void *saddr, unsigned len)
{
int hl = FDDI_K_SNAP_HLEN;
struct fddihdr *fddi;
-
+
if(type != ETH_P_IP && type != ETH_P_IPV6 && type != ETH_P_ARP)
hl=FDDI_K_8022_HLEN-3;
fddi = (struct fddihdr *)skb_push(skb, hl);
}
/* Set the source and destination hardware addresses */
-
+
if (saddr != NULL)
memcpy(fddi->saddr, saddr, dev->addr_len);
else
* (or in future other address resolution) has completed on
* this sk_buff. We now let ARP fill in the other fields.
*/
-
+
static int fddi_rebuild_header(struct sk_buff *skb)
{
struct fddihdr *fddi = (struct fddihdr *)skb->data;
#ifdef CONFIG_INET
- if (fddi->hdr.llc_snap.ethertype == __constant_htons(ETH_P_IP))
+ if (fddi->hdr.llc_snap.ethertype == htons(ETH_P_IP))
/* Try to get ARP to resolve the header and fill destination address */
return arp_find(fddi->daddr, skb);
else
-#endif
+#endif
{
- printk("%s: Don't know how to resolve type %02X addresses.\n",
- skb->dev->name, htons(fddi->hdr.llc_snap.ethertype));
+ printk("%s: Don't know how to resolve type %04X addresses.\n",
+ skb->dev->name, ntohs(fddi->hdr.llc_snap.ethertype));
return(0);
}
}
* up. It's used to fill in specific skb fields and to set
* the proper pointer to the start of packet data (skb->data).
*/
-
-unsigned short fddi_type_trans(struct sk_buff *skb, struct net_device *dev)
+
+__be16 fddi_type_trans(struct sk_buff *skb, struct net_device *dev)
{
struct fddihdr *fddi = (struct fddihdr *)skb->data;
- unsigned short type;
-
+ __be16 type;
+
/*
* Set mac.raw field to point to FC byte, set data field to point
* to start of packet data. Assume 802.2 SNAP frames for now.
*/
- skb->mac.raw = skb->data; /* point to frame control (FC) */
-
+ skb->dev = dev;
+ skb_reset_mac_header(skb); /* point to frame control (FC) */
+
if(fddi->hdr.llc_8022_1.dsap==0xe0)
{
skb_pull(skb, FDDI_K_8022_HLEN-3);
- type = __constant_htons(ETH_P_802_2);
+ type = htons(ETH_P_802_2);
}
else
{
skb_pull(skb, FDDI_K_SNAP_HLEN); /* adjust for 21 byte header */
type=fddi->hdr.llc_snap.ethertype;
}
-
+
/* Set packet type based on destination address and flag settings */
-
+
if (*fddi->daddr & 0x01)
{
if (memcmp(fddi->daddr, dev->broadcast, FDDI_K_ALEN) == 0)
else
skb->pkt_type = PACKET_MULTICAST;
}
-
+
else if (dev->flags & IFF_PROMISC)
{
if (memcmp(fddi->daddr, dev->dev_addr, FDDI_K_ALEN))
EXPORT_SYMBOL(fddi_type_trans);
-static int fddi_change_mtu(struct net_device *dev, int new_mtu)
+int fddi_change_mtu(struct net_device *dev, int new_mtu)
{
if ((new_mtu < FDDI_K_SNAP_HLEN) || (new_mtu > FDDI_K_SNAP_DLEN))
return(-EINVAL);
dev->mtu = new_mtu;
return(0);
}
+EXPORT_SYMBOL(fddi_change_mtu);
+
+static const struct header_ops fddi_header_ops = {
+ .create = fddi_header,
+ .rebuild = fddi_rebuild_header,
+};
+
static void fddi_setup(struct net_device *dev)
{
- dev->change_mtu = fddi_change_mtu;
- dev->hard_header = fddi_header;
- dev->rebuild_header = fddi_rebuild_header;
-
+ dev->header_ops = &fddi_header_ops;
dev->type = ARPHRD_FDDI;
dev->hard_header_len = FDDI_K_SNAP_HLEN+3; /* Assume 802.2 SNAP hdr len + 3 pad bytes */
dev->mtu = FDDI_K_SNAP_DLEN; /* Assume max payload of 802.2 SNAP frame */
dev->addr_len = FDDI_K_ALEN;
dev->tx_queue_len = 100; /* Long queues on FDDI */
dev->flags = IFF_BROADCAST | IFF_MULTICAST;
-
+
memset(dev->broadcast, 0xFF, FDDI_K_ALEN);
}
return alloc_netdev(sizeof_priv, "fddi%d", fddi_setup);
}
EXPORT_SYMBOL(alloc_fddidev);
+
+MODULE_LICENSE("GPL");
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff