/*
- * linux/kernel/time/ntp.c
- *
* NTP state machine interfaces and logic.
*
* This code was mainly moved from kernel/timer.c and kernel/time.c
* Please see those files for relevant copyright info and historical
* changelogs.
*/
-
-#include <linux/mm.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/jiffies.h>
+#include <linux/capability.h>
+#include <linux/clocksource.h>
+#include <linux/workqueue.h>
#include <linux/hrtimer.h>
-
-#include <asm/div64.h>
-#include <asm/timex.h>
+#include <linux/jiffies.h>
+#include <linux/math64.h>
+#include <linux/timex.h>
+#include <linux/time.h>
+#include <linux/mm.h>
/*
- * Timekeeping variables
+ * NTP timekeeping variables:
*/
-unsigned long tick_usec = TICK_USEC; /* USER_HZ period (usec) */
-unsigned long tick_nsec; /* ACTHZ period (nsec) */
-static u64 tick_length, tick_length_base;
-#define MAX_TICKADJ 500 /* microsecs */
-#define MAX_TICKADJ_SCALED (((u64)(MAX_TICKADJ * NSEC_PER_USEC) << \
- TICK_LENGTH_SHIFT) / NTP_INTERVAL_FREQ)
+/* USER_HZ period (usecs): */
+unsigned long tick_usec = TICK_USEC;
+
+/* ACTHZ period (nsecs): */
+unsigned long tick_nsec;
+
+u64 tick_length;
+static u64 tick_length_base;
+
+static struct hrtimer leap_timer;
+
+#define MAX_TICKADJ 500LL /* usecs */
+#define MAX_TICKADJ_SCALED \
+ (((MAX_TICKADJ * NSEC_PER_USEC) << NTP_SCALE_SHIFT) / NTP_INTERVAL_FREQ)
/*
* phase-lock loop variables
*/
-/* TIME_ERROR prevents overwriting the CMOS clock */
-static int time_state = TIME_OK; /* clock synchronization status */
-int time_status = STA_UNSYNC; /* clock status bits */
-static s64 time_offset; /* time adjustment (ns) */
-static long time_constant = 2; /* pll time constant */
-long time_maxerror = NTP_PHASE_LIMIT; /* maximum error (us) */
-long time_esterror = NTP_PHASE_LIMIT; /* estimated error (us) */
-long time_freq; /* frequency offset (scaled ppm)*/
-static long time_reftime; /* time at last adjustment (s) */
-long time_adjust;
-
-#define CLOCK_TICK_OVERFLOW (LATCH * HZ - CLOCK_TICK_RATE)
-#define CLOCK_TICK_ADJUST (((s64)CLOCK_TICK_OVERFLOW * NSEC_PER_SEC) / \
- (s64)CLOCK_TICK_RATE)
+/*
+ * clock synchronization status
+ *
+ * (TIME_ERROR prevents overwriting the CMOS clock)
+ */
+static int time_state = TIME_OK;
+
+/* clock status bits: */
+int time_status = STA_UNSYNC;
+
+/* TAI offset (secs): */
+static long time_tai;
+
+/* time adjustment (nsecs): */
+static s64 time_offset;
+
+/* pll time constant: */
+static long time_constant = 2;
+
+/* maximum error (usecs): */
+static long time_maxerror = NTP_PHASE_LIMIT;
+
+/* estimated error (usecs): */
+static long time_esterror = NTP_PHASE_LIMIT;
+
+/* frequency offset (scaled nsecs/secs): */
+static s64 time_freq;
+
+/* time at last adjustment (secs): */
+static long time_reftime;
+
+long time_adjust;
+
+/* constant (boot-param configurable) NTP tick adjustment (upscaled) */
+static s64 ntp_tick_adj;
+
+/*
+ * NTP methods:
+ */
+
+/*
+ * Update (tick_length, tick_length_base, tick_nsec), based
+ * on (tick_usec, ntp_tick_adj, time_freq):
+ */
static void ntp_update_frequency(void)
{
- u64 second_length = (u64)(tick_usec * NSEC_PER_USEC * USER_HZ)
- << TICK_LENGTH_SHIFT;
- second_length += (s64)CLOCK_TICK_ADJUST << TICK_LENGTH_SHIFT;
- second_length += (s64)time_freq << (TICK_LENGTH_SHIFT - SHIFT_NSEC);
+ u64 second_length;
+ u64 new_base;
+
+ second_length = (u64)(tick_usec * NSEC_PER_USEC * USER_HZ)
+ << NTP_SCALE_SHIFT;
+
+ second_length += ntp_tick_adj;
+ second_length += time_freq;
+
+ tick_nsec = div_u64(second_length, HZ) >> NTP_SCALE_SHIFT;
+ new_base = div_u64(second_length, NTP_INTERVAL_FREQ);
+
+ /*
+ * Don't wait for the next second_overflow, apply
+ * the change to the tick length immediately:
+ */
+ tick_length += new_base - tick_length_base;
+ tick_length_base = new_base;
+}
+
+static inline s64 ntp_update_offset_fll(s64 offset64, long secs)
+{
+ time_status &= ~STA_MODE;
- tick_length_base = second_length;
+ if (secs < MINSEC)
+ return 0;
- do_div(second_length, HZ);
- tick_nsec = second_length >> TICK_LENGTH_SHIFT;
+ if (!(time_status & STA_FLL) && (secs <= MAXSEC))
+ return 0;
- do_div(tick_length_base, NTP_INTERVAL_FREQ);
+ time_status |= STA_MODE;
+
+ return div_s64(offset64 << (NTP_SCALE_SHIFT - SHIFT_FLL), secs);
+}
+
+static void ntp_update_offset(long offset)
+{
+ s64 freq_adj;
+ s64 offset64;
+ long secs;
+
+ if (!(time_status & STA_PLL))
+ return;
+
+ if (!(time_status & STA_NANO))
+ offset *= NSEC_PER_USEC;
+
+ /*
+ * Scale the phase adjustment and
+ * clamp to the operating range.
+ */
+ offset = min(offset, MAXPHASE);
+ offset = max(offset, -MAXPHASE);
+
+ /*
+ * Select how the frequency is to be controlled
+ * and in which mode (PLL or FLL).
+ */
+ secs = get_seconds() - time_reftime;
+ if (unlikely(time_status & STA_FREQHOLD))
+ secs = 0;
+
+ time_reftime = get_seconds();
+
+ offset64 = offset;
+ freq_adj = (offset64 * secs) <<
+ (NTP_SCALE_SHIFT - 2 * (SHIFT_PLL + 2 + time_constant));
+
+ freq_adj += ntp_update_offset_fll(offset64, secs);
+
+ freq_adj = min(freq_adj + time_freq, MAXFREQ_SCALED);
+
+ time_freq = max(freq_adj, -MAXFREQ_SCALED);
+
+ time_offset = div_s64(offset64 << NTP_SCALE_SHIFT, NTP_INTERVAL_FREQ);
}
/**
*/
void ntp_clear(void)
{
- time_adjust = 0; /* stop active adjtime() */
- time_status |= STA_UNSYNC;
- time_maxerror = NTP_PHASE_LIMIT;
- time_esterror = NTP_PHASE_LIMIT;
+ time_adjust = 0; /* stop active adjtime() */
+ time_status |= STA_UNSYNC;
+ time_maxerror = NTP_PHASE_LIMIT;
+ time_esterror = NTP_PHASE_LIMIT;
ntp_update_frequency();
- tick_length = tick_length_base;
- time_offset = 0;
+ tick_length = tick_length_base;
+ time_offset = 0;
+}
+
+/*
+ * Leap second processing. If in leap-insert state at the end of the
+ * day, the system clock is set back one second; if in leap-delete
+ * state, the system clock is set ahead one second.
+ */
+static enum hrtimer_restart ntp_leap_second(struct hrtimer *timer)
+{
+ enum hrtimer_restart res = HRTIMER_NORESTART;
+
+ write_seqlock(&xtime_lock);
+
+ switch (time_state) {
+ case TIME_OK:
+ break;
+ case TIME_INS:
+ timekeeping_leap_insert(-1);
+ time_state = TIME_OOP;
+ printk(KERN_NOTICE
+ "Clock: inserting leap second 23:59:60 UTC\n");
+ hrtimer_add_expires_ns(&leap_timer, NSEC_PER_SEC);
+ res = HRTIMER_RESTART;
+ break;
+ case TIME_DEL:
+ timekeeping_leap_insert(1);
+ time_tai--;
+ time_state = TIME_WAIT;
+ printk(KERN_NOTICE
+ "Clock: deleting leap second 23:59:59 UTC\n");
+ break;
+ case TIME_OOP:
+ time_tai++;
+ time_state = TIME_WAIT;
+ /* fall through */
+ case TIME_WAIT:
+ if (!(time_status & (STA_INS | STA_DEL)))
+ time_state = TIME_OK;
+ break;
+ }
+
+ write_sequnlock(&xtime_lock);
+
+ return res;
}
/*
*/
void second_overflow(void)
{
- long time_adj;
+ s64 delta;
/* Bump the maxerror field */
- time_maxerror += MAXFREQ >> SHIFT_USEC;
+ time_maxerror += MAXFREQ / NSEC_PER_USEC;
if (time_maxerror > NTP_PHASE_LIMIT) {
time_maxerror = NTP_PHASE_LIMIT;
time_status |= STA_UNSYNC;
}
/*
- * Leap second processing. If in leap-insert state at the end of the
- * day, the system clock is set back one second; if in leap-delete
- * state, the system clock is set ahead one second. The microtime()
- * routine or external clock driver will insure that reported time is
- * always monotonic. The ugly divides should be replaced.
+ * Compute the phase adjustment for the next second. The offset is
+ * reduced by a fixed factor times the time constant.
+ */
+ tick_length = tick_length_base;
+
+ delta = shift_right(time_offset, SHIFT_PLL + time_constant);
+ time_offset -= delta;
+ tick_length += delta;
+
+ if (!time_adjust)
+ return;
+
+ if (time_adjust > MAX_TICKADJ) {
+ time_adjust -= MAX_TICKADJ;
+ tick_length += MAX_TICKADJ_SCALED;
+ return;
+ }
+
+ if (time_adjust < -MAX_TICKADJ) {
+ time_adjust += MAX_TICKADJ;
+ tick_length -= MAX_TICKADJ_SCALED;
+ return;
+ }
+
+ tick_length += (s64)(time_adjust * NSEC_PER_USEC / NTP_INTERVAL_FREQ)
+ << NTP_SCALE_SHIFT;
+ time_adjust = 0;
+}
+
+#ifdef CONFIG_GENERIC_CMOS_UPDATE
+
+/* Disable the cmos update - used by virtualization and embedded */
+int no_sync_cmos_clock __read_mostly;
+
+static void sync_cmos_clock(struct work_struct *work);
+
+static DECLARE_DELAYED_WORK(sync_cmos_work, sync_cmos_clock);
+
+static void sync_cmos_clock(struct work_struct *work)
+{
+ struct timespec now, next;
+ int fail = 1;
+
+ /*
+ * If we have an externally synchronized Linux clock, then update
+ * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
+ * called as close as possible to 500 ms before the new second starts.
+ * This code is run on a timer. If the clock is set, that timer
+ * may not expire at the correct time. Thus, we adjust...
+ */
+ if (!ntp_synced()) {
+ /*
+ * Not synced, exit, do not restart a timer (if one is
+ * running, let it run out).
+ */
+ return;
+ }
+
+ getnstimeofday(&now);
+ if (abs(now.tv_nsec - (NSEC_PER_SEC / 2)) <= tick_nsec / 2)
+ fail = update_persistent_clock(now);
+
+ next.tv_nsec = (NSEC_PER_SEC / 2) - now.tv_nsec - (TICK_NSEC / 2);
+ if (next.tv_nsec <= 0)
+ next.tv_nsec += NSEC_PER_SEC;
+
+ if (!fail)
+ next.tv_sec = 659;
+ else
+ next.tv_sec = 0;
+
+ if (next.tv_nsec >= NSEC_PER_SEC) {
+ next.tv_sec++;
+ next.tv_nsec -= NSEC_PER_SEC;
+ }
+ schedule_delayed_work(&sync_cmos_work, timespec_to_jiffies(&next));
+}
+
+static void notify_cmos_timer(void)
+{
+ if (!no_sync_cmos_clock)
+ schedule_delayed_work(&sync_cmos_work, 0);
+}
+
+#else
+static inline void notify_cmos_timer(void) { }
+#endif
+
+/*
+ * Start the leap seconds timer:
+ */
+static inline void ntp_start_leap_timer(struct timespec *ts)
+{
+ long now = ts->tv_sec;
+
+ if (time_status & STA_INS) {
+ time_state = TIME_INS;
+ now += 86400 - now % 86400;
+ hrtimer_start(&leap_timer, ktime_set(now, 0), HRTIMER_MODE_ABS);
+
+ return;
+ }
+
+ if (time_status & STA_DEL) {
+ time_state = TIME_DEL;
+ now += 86400 - (now + 1) % 86400;
+ hrtimer_start(&leap_timer, ktime_set(now, 0), HRTIMER_MODE_ABS);
+ }
+}
+
+/*
+ * Propagate a new txc->status value into the NTP state:
+ */
+static inline void process_adj_status(struct timex *txc, struct timespec *ts)
+{
+ if ((time_status & STA_PLL) && !(txc->status & STA_PLL)) {
+ time_state = TIME_OK;
+ time_status = STA_UNSYNC;
+ }
+
+ /*
+ * If we turn on PLL adjustments then reset the
+ * reference time to current time.
*/
+ if (!(time_status & STA_PLL) && (txc->status & STA_PLL))
+ time_reftime = get_seconds();
+
+ /* only set allowed bits */
+ time_status &= STA_RONLY;
+ time_status |= txc->status & ~STA_RONLY;
+
switch (time_state) {
case TIME_OK:
- if (time_status & STA_INS)
- time_state = TIME_INS;
- else if (time_status & STA_DEL)
- time_state = TIME_DEL;
+ ntp_start_leap_timer(ts);
break;
case TIME_INS:
- if (xtime.tv_sec % 86400 == 0) {
- xtime.tv_sec--;
- wall_to_monotonic.tv_sec++;
- /*
- * The timer interpolator will make time change
- * gradually instead of an immediate jump by one second
- */
- time_interpolator_update(-NSEC_PER_SEC);
- time_state = TIME_OOP;
- clock_was_set();
- printk(KERN_NOTICE "Clock: inserting leap second "
- "23:59:60 UTC\n");
- }
- break;
case TIME_DEL:
- if ((xtime.tv_sec + 1) % 86400 == 0) {
- xtime.tv_sec++;
- wall_to_monotonic.tv_sec--;
- /*
- * Use of time interpolator for a gradual change of
- * time
- */
- time_interpolator_update(NSEC_PER_SEC);
- time_state = TIME_WAIT;
- clock_was_set();
- printk(KERN_NOTICE "Clock: deleting leap second "
- "23:59:59 UTC\n");
- }
+ time_state = TIME_OK;
+ ntp_start_leap_timer(ts);
+ case TIME_WAIT:
+ if (!(time_status & (STA_INS | STA_DEL)))
+ time_state = TIME_OK;
break;
case TIME_OOP:
- time_state = TIME_WAIT;
+ hrtimer_restart(&leap_timer);
break;
- case TIME_WAIT:
- if (!(time_status & (STA_INS | STA_DEL)))
- time_state = TIME_OK;
- }
-
- /*
- * Compute the phase adjustment for the next second. The offset is
- * reduced by a fixed factor times the time constant.
- */
- tick_length = tick_length_base;
- time_adj = shift_right(time_offset, SHIFT_PLL + time_constant);
- time_offset -= time_adj;
- tick_length += (s64)time_adj << (TICK_LENGTH_SHIFT - SHIFT_UPDATE);
-
- if (unlikely(time_adjust)) {
- if (time_adjust > MAX_TICKADJ) {
- time_adjust -= MAX_TICKADJ;
- tick_length += MAX_TICKADJ_SCALED;
- } else if (time_adjust < -MAX_TICKADJ) {
- time_adjust += MAX_TICKADJ;
- tick_length -= MAX_TICKADJ_SCALED;
- } else {
- tick_length += (s64)(time_adjust * NSEC_PER_USEC /
- NTP_INTERVAL_FREQ) << TICK_LENGTH_SHIFT;
- time_adjust = 0;
- }
}
}
-
/*
- * Return how long ticks are at the moment, that is, how much time
- * update_wall_time_one_tick will add to xtime next time we call it
- * (assuming no calls to do_adjtimex in the meantime).
- * The return value is in fixed-point nanoseconds shifted by the
- * specified number of bits to the right of the binary point.
- * This function has no side-effects.
+ * Called with the xtime lock held, so we can access and modify
+ * all the global NTP state:
*/
-u64 current_tick_length(void)
+static inline void process_adjtimex_modes(struct timex *txc, struct timespec *ts)
{
- return tick_length;
-}
+ if (txc->modes & ADJ_STATUS)
+ process_adj_status(txc, ts);
+ if (txc->modes & ADJ_NANO)
+ time_status |= STA_NANO;
-void __attribute__ ((weak)) notify_arch_cmos_timer(void)
-{
- return;
+ if (txc->modes & ADJ_MICRO)
+ time_status &= ~STA_NANO;
+
+ if (txc->modes & ADJ_FREQUENCY) {
+ time_freq = txc->freq * PPM_SCALE;
+ time_freq = min(time_freq, MAXFREQ_SCALED);
+ time_freq = max(time_freq, -MAXFREQ_SCALED);
+ }
+
+ if (txc->modes & ADJ_MAXERROR)
+ time_maxerror = txc->maxerror;
+
+ if (txc->modes & ADJ_ESTERROR)
+ time_esterror = txc->esterror;
+
+ if (txc->modes & ADJ_TIMECONST) {
+ time_constant = txc->constant;
+ if (!(time_status & STA_NANO))
+ time_constant += 4;
+ time_constant = min(time_constant, (long)MAXTC);
+ time_constant = max(time_constant, 0l);
+ }
+
+ if (txc->modes & ADJ_TAI && txc->constant > 0)
+ time_tai = txc->constant;
+
+ if (txc->modes & ADJ_OFFSET)
+ ntp_update_offset(txc->offset);
+
+ if (txc->modes & ADJ_TICK)
+ tick_usec = txc->tick;
+
+ if (txc->modes & (ADJ_TICK|ADJ_FREQUENCY|ADJ_OFFSET))
+ ntp_update_frequency();
}
-/* adjtimex mainly allows reading (and writing, if superuser) of
+/*
+ * adjtimex mainly allows reading (and writing, if superuser) of
* kernel time-keeping variables. used by xntpd.
*/
int do_adjtimex(struct timex *txc)
{
- long mtemp, save_adjust, rem;
- s64 freq_adj, temp64;
+ struct timespec ts;
int result;
- /* In order to modify anything, you gotta be super-user! */
- if (txc->modes && !capable(CAP_SYS_TIME))
- return -EPERM;
-
- /* Now we validate the data before disabling interrupts */
-
- if ((txc->modes & ADJ_OFFSET_SINGLESHOT) == ADJ_OFFSET_SINGLESHOT)
- /* singleshot must not be used with any other mode bits */
- if (txc->modes != ADJ_OFFSET_SINGLESHOT)
+ /* Validate the data before disabling interrupts */
+ if (txc->modes & ADJ_ADJTIME) {
+ /* singleshot must not be used with any other mode bits */
+ if (!(txc->modes & ADJ_OFFSET_SINGLESHOT))
return -EINVAL;
-
- if (txc->modes != ADJ_OFFSET_SINGLESHOT && (txc->modes & ADJ_OFFSET))
- /* adjustment Offset limited to +- .512 seconds */
- if (txc->offset <= - MAXPHASE || txc->offset >= MAXPHASE )
+ if (!(txc->modes & ADJ_OFFSET_READONLY) &&
+ !capable(CAP_SYS_TIME))
+ return -EPERM;
+ } else {
+ /* In order to modify anything, you gotta be super-user! */
+ if (txc->modes && !capable(CAP_SYS_TIME))
+ return -EPERM;
+
+ /*
+ * if the quartz is off by more than 10% then
+ * something is VERY wrong!
+ */
+ if (txc->modes & ADJ_TICK &&
+ (txc->tick < 900000/USER_HZ ||
+ txc->tick > 1100000/USER_HZ))
return -EINVAL;
- /* if the quartz is off by more than 10% something is VERY wrong ! */
- if (txc->modes & ADJ_TICK)
- if (txc->tick < 900000/USER_HZ ||
- txc->tick > 1100000/USER_HZ)
- return -EINVAL;
+ if (txc->modes & ADJ_STATUS && time_state != TIME_OK)
+ hrtimer_cancel(&leap_timer);
+ }
+
+ getnstimeofday(&ts);
write_seqlock_irq(&xtime_lock);
- result = time_state; /* mostly `TIME_OK' */
- /* Save for later - semantics of adjtime is to return old value */
- save_adjust = time_adjust;
+ if (txc->modes & ADJ_ADJTIME) {
+ long save_adjust = time_adjust;
-#if 0 /* STA_CLOCKERR is never set yet */
- time_status &= ~STA_CLOCKERR; /* reset STA_CLOCKERR */
-#endif
- /* If there are input parameters, then process them */
- if (txc->modes)
- {
- if (txc->modes & ADJ_STATUS) /* only set allowed bits */
- time_status = (txc->status & ~STA_RONLY) |
- (time_status & STA_RONLY);
-
- if (txc->modes & ADJ_FREQUENCY) { /* p. 22 */
- if (txc->freq > MAXFREQ || txc->freq < -MAXFREQ) {
- result = -EINVAL;
- goto leave;
+ if (!(txc->modes & ADJ_OFFSET_READONLY)) {
+ /* adjtime() is independent from ntp_adjtime() */
+ time_adjust = txc->offset;
+ ntp_update_frequency();
}
- time_freq = ((s64)txc->freq * NSEC_PER_USEC)
- >> (SHIFT_USEC - SHIFT_NSEC);
- }
-
- if (txc->modes & ADJ_MAXERROR) {
- if (txc->maxerror < 0 || txc->maxerror >= NTP_PHASE_LIMIT) {
- result = -EINVAL;
- goto leave;
- }
- time_maxerror = txc->maxerror;
- }
-
- if (txc->modes & ADJ_ESTERROR) {
- if (txc->esterror < 0 || txc->esterror >= NTP_PHASE_LIMIT) {
- result = -EINVAL;
- goto leave;
- }
- time_esterror = txc->esterror;
- }
+ txc->offset = save_adjust;
+ } else {
- if (txc->modes & ADJ_TIMECONST) { /* p. 24 */
- if (txc->constant < 0) { /* NTP v4 uses values > 6 */
- result = -EINVAL;
- goto leave;
- }
- time_constant = min(txc->constant + 4, (long)MAXTC);
- }
+ /* If there are input parameters, then process them: */
+ if (txc->modes)
+ process_adjtimex_modes(txc, &ts);
- if (txc->modes & ADJ_OFFSET) { /* values checked earlier */
- if (txc->modes == ADJ_OFFSET_SINGLESHOT) {
- /* adjtime() is independent from ntp_adjtime() */
- time_adjust = txc->offset;
- }
- else if (time_status & STA_PLL) {
- time_offset = txc->offset * NSEC_PER_USEC;
-
- /*
- * Scale the phase adjustment and
- * clamp to the operating range.
- */
- time_offset = min(time_offset, (s64)MAXPHASE * NSEC_PER_USEC);
- time_offset = max(time_offset, (s64)-MAXPHASE * NSEC_PER_USEC);
-
- /*
- * Select whether the frequency is to be controlled
- * and in which mode (PLL or FLL). Clamp to the operating
- * range. Ugly multiply/divide should be replaced someday.
- */
-
- if (time_status & STA_FREQHOLD || time_reftime == 0)
- time_reftime = xtime.tv_sec;
- mtemp = xtime.tv_sec - time_reftime;
- time_reftime = xtime.tv_sec;
-
- freq_adj = time_offset * mtemp;
- freq_adj = shift_right(freq_adj, time_constant * 2 +
- (SHIFT_PLL + 2) * 2 - SHIFT_NSEC);
- if (mtemp >= MINSEC && (time_status & STA_FLL || mtemp > MAXSEC)) {
- temp64 = time_offset << (SHIFT_NSEC - SHIFT_FLL);
- if (time_offset < 0) {
- temp64 = -temp64;
- do_div(temp64, mtemp);
- freq_adj -= temp64;
- } else {
- do_div(temp64, mtemp);
- freq_adj += temp64;
- }
- }
- freq_adj += time_freq;
- freq_adj = min(freq_adj, (s64)MAXFREQ_NSEC);
- time_freq = max(freq_adj, (s64)-MAXFREQ_NSEC);
- time_offset = div_long_long_rem_signed(time_offset,
- NTP_INTERVAL_FREQ,
- &rem);
- time_offset <<= SHIFT_UPDATE;
- } /* STA_PLL */
- } /* txc->modes & ADJ_OFFSET */
- if (txc->modes & ADJ_TICK)
- tick_usec = txc->tick;
+ txc->offset = shift_right(time_offset * NTP_INTERVAL_FREQ,
+ NTP_SCALE_SHIFT);
+ if (!(time_status & STA_NANO))
+ txc->offset /= NSEC_PER_USEC;
+ }
- if (txc->modes & (ADJ_TICK|ADJ_FREQUENCY|ADJ_OFFSET))
- ntp_update_frequency();
- } /* txc->modes */
-leave: if ((time_status & (STA_UNSYNC|STA_CLOCKERR)) != 0)
+ result = time_state; /* mostly `TIME_OK' */
+ if (time_status & (STA_UNSYNC|STA_CLOCKERR))
result = TIME_ERROR;
- if ((txc->modes & ADJ_OFFSET_SINGLESHOT) == ADJ_OFFSET_SINGLESHOT)
- txc->offset = save_adjust;
- else
- txc->offset = ((long)shift_right(time_offset, SHIFT_UPDATE)) *
- NTP_INTERVAL_FREQ / 1000;
- txc->freq = (time_freq / NSEC_PER_USEC) <<
- (SHIFT_USEC - SHIFT_NSEC);
+ txc->freq = shift_right((time_freq >> PPM_SCALE_INV_SHIFT) *
+ PPM_SCALE_INV, NTP_SCALE_SHIFT);
txc->maxerror = time_maxerror;
txc->esterror = time_esterror;
txc->status = time_status;
txc->constant = time_constant;
txc->precision = 1;
- txc->tolerance = MAXFREQ;
+ txc->tolerance = MAXFREQ_SCALED / PPM_SCALE;
txc->tick = tick_usec;
+ txc->tai = time_tai;
/* PPS is not implemented, so these are zero */
txc->ppsfreq = 0;
txc->calcnt = 0;
txc->errcnt = 0;
txc->stbcnt = 0;
+
write_sequnlock_irq(&xtime_lock);
- do_gettimeofday(&txc->time);
- notify_arch_cmos_timer();
- return(result);
+
+ txc->time.tv_sec = ts.tv_sec;
+ txc->time.tv_usec = ts.tv_nsec;
+ if (!(time_status & STA_NANO))
+ txc->time.tv_usec /= NSEC_PER_USEC;
+
+ notify_cmos_timer();
+
+ return result;
+}
+
+static int __init ntp_tick_adj_setup(char *str)
+{
+ ntp_tick_adj = simple_strtol(str, NULL, 0);
+ ntp_tick_adj <<= NTP_SCALE_SHIFT;
+
+ return 1;
+}
+
+__setup("ntp_tick_adj=", ntp_tick_adj_setup);
+
+void __init ntp_init(void)
+{
+ ntp_clear();
+ hrtimer_init(&leap_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS);
+ leap_timer.function = ntp_leap_second;
}