* to allow signals to be sent reliably.
*/
-#include <linux/config.h>
#include <linux/slab.h>
#include <linux/module.h>
-#include <linux/smp_lock.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/fs.h>
#include <linux/syscalls.h>
#include <linux/ptrace.h>
#include <linux/signal.h>
-#include <linux/audit.h>
+#include <linux/signalfd.h>
#include <linux/capability.h>
+#include <linux/freezer.h>
+#include <linux/pid_namespace.h>
+#include <linux/nsproxy.h>
+
#include <asm/param.h>
#include <asm/uaccess.h>
#include <asm/unistd.h>
#include <asm/siginfo.h>
+#include "audit.h" /* audit_signal_info() */
/*
* SLAB caches for signal bits.
*/
-static kmem_cache_t *sigqueue_cachep;
-
-/*
- * In POSIX a signal is sent either to a specific thread (Linux task)
- * or to the process as a whole (Linux thread group). How the signal
- * is sent determines whether it's to one thread or the whole group,
- * which determines which signal mask(s) are involved in blocking it
- * from being delivered until later. When the signal is delivered,
- * either it's caught or ignored by a user handler or it has a default
- * effect that applies to the whole thread group (POSIX process).
- *
- * The possible effects an unblocked signal set to SIG_DFL can have are:
- * ignore - Nothing Happens
- * terminate - kill the process, i.e. all threads in the group,
- * similar to exit_group. The group leader (only) reports
- * WIFSIGNALED status to its parent.
- * coredump - write a core dump file describing all threads using
- * the same mm and then kill all those threads
- * stop - stop all the threads in the group, i.e. TASK_STOPPED state
- *
- * SIGKILL and SIGSTOP cannot be caught, blocked, or ignored.
- * Other signals when not blocked and set to SIG_DFL behaves as follows.
- * The job control signals also have other special effects.
- *
- * +--------------------+------------------+
- * | POSIX signal | default action |
- * +--------------------+------------------+
- * | SIGHUP | terminate |
- * | SIGINT | terminate |
- * | SIGQUIT | coredump |
- * | SIGILL | coredump |
- * | SIGTRAP | coredump |
- * | SIGABRT/SIGIOT | coredump |
- * | SIGBUS | coredump |
- * | SIGFPE | coredump |
- * | SIGKILL | terminate(+) |
- * | SIGUSR1 | terminate |
- * | SIGSEGV | coredump |
- * | SIGUSR2 | terminate |
- * | SIGPIPE | terminate |
- * | SIGALRM | terminate |
- * | SIGTERM | terminate |
- * | SIGCHLD | ignore |
- * | SIGCONT | ignore(*) |
- * | SIGSTOP | stop(*)(+) |
- * | SIGTSTP | stop(*) |
- * | SIGTTIN | stop(*) |
- * | SIGTTOU | stop(*) |
- * | SIGURG | ignore |
- * | SIGXCPU | coredump |
- * | SIGXFSZ | coredump |
- * | SIGVTALRM | terminate |
- * | SIGPROF | terminate |
- * | SIGPOLL/SIGIO | terminate |
- * | SIGSYS/SIGUNUSED | coredump |
- * | SIGSTKFLT | terminate |
- * | SIGWINCH | ignore |
- * | SIGPWR | terminate |
- * | SIGRTMIN-SIGRTMAX | terminate |
- * +--------------------+------------------+
- * | non-POSIX signal | default action |
- * +--------------------+------------------+
- * | SIGEMT | coredump |
- * +--------------------+------------------+
- *
- * (+) For SIGKILL and SIGSTOP the action is "always", not just "default".
- * (*) Special job control effects:
- * When SIGCONT is sent, it resumes the process (all threads in the group)
- * from TASK_STOPPED state and also clears any pending/queued stop signals
- * (any of those marked with "stop(*)"). This happens regardless of blocking,
- * catching, or ignoring SIGCONT. When any stop signal is sent, it clears
- * any pending/queued SIGCONT signals; this happens regardless of blocking,
- * catching, or ignored the stop signal, though (except for SIGSTOP) the
- * default action of stopping the process may happen later or never.
- */
-
-#ifdef SIGEMT
-#define M_SIGEMT M(SIGEMT)
-#else
-#define M_SIGEMT 0
-#endif
-
-#if SIGRTMIN > BITS_PER_LONG
-#define M(sig) (1ULL << ((sig)-1))
-#else
-#define M(sig) (1UL << ((sig)-1))
-#endif
-#define T(sig, mask) (M(sig) & (mask))
-
-#define SIG_KERNEL_ONLY_MASK (\
- M(SIGKILL) | M(SIGSTOP) )
-
-#define SIG_KERNEL_STOP_MASK (\
- M(SIGSTOP) | M(SIGTSTP) | M(SIGTTIN) | M(SIGTTOU) )
-
-#define SIG_KERNEL_COREDUMP_MASK (\
- M(SIGQUIT) | M(SIGILL) | M(SIGTRAP) | M(SIGABRT) | \
- M(SIGFPE) | M(SIGSEGV) | M(SIGBUS) | M(SIGSYS) | \
- M(SIGXCPU) | M(SIGXFSZ) | M_SIGEMT )
-
-#define SIG_KERNEL_IGNORE_MASK (\
- M(SIGCONT) | M(SIGCHLD) | M(SIGWINCH) | M(SIGURG) )
-
-#define sig_kernel_only(sig) \
- (((sig) < SIGRTMIN) && T(sig, SIG_KERNEL_ONLY_MASK))
-#define sig_kernel_coredump(sig) \
- (((sig) < SIGRTMIN) && T(sig, SIG_KERNEL_COREDUMP_MASK))
-#define sig_kernel_ignore(sig) \
- (((sig) < SIGRTMIN) && T(sig, SIG_KERNEL_IGNORE_MASK))
-#define sig_kernel_stop(sig) \
- (((sig) < SIGRTMIN) && T(sig, SIG_KERNEL_STOP_MASK))
-
-#define sig_needs_tasklist(sig) ((sig) == SIGCONT)
+static struct kmem_cache *sigqueue_cachep;
-#define sig_user_defined(t, signr) \
- (((t)->sighand->action[(signr)-1].sa.sa_handler != SIG_DFL) && \
- ((t)->sighand->action[(signr)-1].sa.sa_handler != SIG_IGN))
-
-#define sig_fatal(t, signr) \
- (!T(signr, SIG_KERNEL_IGNORE_MASK|SIG_KERNEL_STOP_MASK) && \
- (t)->sighand->action[(signr)-1].sa.sa_handler == SIG_DFL)
static int sig_ignored(struct task_struct *t, int sig)
{
* signal handler may change by the time it is
* unblocked.
*/
- if (sigismember(&t->blocked, sig))
+ if (sigismember(&t->blocked, sig) || sigismember(&t->real_blocked, sig))
return 0;
/* Is it explicitly or implicitly ignored? */
#define PENDING(p,b) has_pending_signals(&(p)->signal, (b))
-fastcall void recalc_sigpending_tsk(struct task_struct *t)
+static int recalc_sigpending_tsk(struct task_struct *t)
{
if (t->signal->group_stop_count > 0 ||
- (freezing(t)) ||
PENDING(&t->pending, &t->blocked) ||
- PENDING(&t->signal->shared_pending, &t->blocked))
+ PENDING(&t->signal->shared_pending, &t->blocked)) {
set_tsk_thread_flag(t, TIF_SIGPENDING);
- else
- clear_tsk_thread_flag(t, TIF_SIGPENDING);
+ return 1;
+ }
+ /*
+ * We must never clear the flag in another thread, or in current
+ * when it's possible the current syscall is returning -ERESTART*.
+ * So we don't clear it here, and only callers who know they should do.
+ */
+ return 0;
+}
+
+/*
+ * After recalculating TIF_SIGPENDING, we need to make sure the task wakes up.
+ * This is superfluous when called on current, the wakeup is a harmless no-op.
+ */
+void recalc_sigpending_and_wake(struct task_struct *t)
+{
+ if (recalc_sigpending_tsk(t))
+ signal_wake_up(t, 0);
}
void recalc_sigpending(void)
{
- recalc_sigpending_tsk(current);
+ if (!recalc_sigpending_tsk(current) && !freezing(current))
+ clear_thread_flag(TIF_SIGPENDING);
+
}
/* Given the mask, find the first available signal that should be serviced. */
-static int
-next_signal(struct sigpending *pending, sigset_t *mask)
+int next_signal(struct sigpending *pending, sigset_t *mask)
{
unsigned long i, *s, *m, x;
int sig = 0;
int override_rlimit)
{
struct sigqueue *q = NULL;
+ struct user_struct *user;
- atomic_inc(&t->user->sigpending);
+ /*
+ * In order to avoid problems with "switch_user()", we want to make
+ * sure that the compiler doesn't re-load "t->user"
+ */
+ user = t->user;
+ barrier();
+ atomic_inc(&user->sigpending);
if (override_rlimit ||
- atomic_read(&t->user->sigpending) <=
+ atomic_read(&user->sigpending) <=
t->signal->rlim[RLIMIT_SIGPENDING].rlim_cur)
q = kmem_cache_alloc(sigqueue_cachep, flags);
if (unlikely(q == NULL)) {
- atomic_dec(&t->user->sigpending);
+ atomic_dec(&user->sigpending);
} else {
INIT_LIST_HEAD(&q->list);
q->flags = 0;
- q->user = get_uid(t->user);
+ q->user = get_uid(user);
}
return(q);
}
spin_unlock_irqrestore(&t->sighand->siglock, flags);
}
+void ignore_signals(struct task_struct *t)
+{
+ int i;
+
+ for (i = 0; i < _NSIG; ++i)
+ t->sighand->action[i].sa.sa_handler = SIG_IGN;
+
+ flush_signals(t);
+}
+
/*
* Flush all handlers for a task.
*/
}
}
+int unhandled_signal(struct task_struct *tsk, int sig)
+{
+ if (is_global_init(tsk))
+ return 1;
+ if (tsk->ptrace & PT_PTRACED)
+ return 0;
+ return (tsk->sighand->action[sig-1].sa.sa_handler == SIG_IGN) ||
+ (tsk->sighand->action[sig-1].sa.sa_handler == SIG_DFL);
+}
+
/* Notify the system that a driver wants to block all signals for this
* process, and wants to be notified if any signals at all were to be
static int __dequeue_signal(struct sigpending *pending, sigset_t *mask,
siginfo_t *info)
{
- int sig = 0;
+ int sig = next_signal(pending, mask);
- sig = next_signal(pending, mask);
if (sig) {
if (current->notifier) {
if (sigismember(current->notifier_mask, sig)) {
if (!collect_signal(sig, pending, info))
sig = 0;
-
}
- recalc_sigpending();
return sig;
}
*/
int dequeue_signal(struct task_struct *tsk, sigset_t *mask, siginfo_t *info)
{
- int signr = __dequeue_signal(&tsk->pending, mask, info);
- if (!signr)
+ int signr = 0;
+
+ /* We only dequeue private signals from ourselves, we don't let
+ * signalfd steal them
+ */
+ signr = __dequeue_signal(&tsk->pending, mask, info);
+ if (!signr) {
signr = __dequeue_signal(&tsk->signal->shared_pending,
mask, info);
- if (signr && unlikely(sig_kernel_stop(signr))) {
- /*
- * Set a marker that we have dequeued a stop signal. Our
- * caller might release the siglock and then the pending
- * stop signal it is about to process is no longer in the
- * pending bitmasks, but must still be cleared by a SIGCONT
- * (and overruled by a SIGKILL). So those cases clear this
- * shared flag after we've set it. Note that this flag may
- * remain set after the signal we return is ignored or
- * handled. That doesn't matter because its only purpose
- * is to alert stop-signal processing code when another
- * processor has come along and cleared the flag.
- */
- if (!(tsk->signal->flags & SIGNAL_GROUP_EXIT))
- tsk->signal->flags |= SIGNAL_STOP_DEQUEUED;
- }
- if ( signr &&
+ /*
+ * itimer signal ?
+ *
+ * itimers are process shared and we restart periodic
+ * itimers in the signal delivery path to prevent DoS
+ * attacks in the high resolution timer case. This is
+ * compliant with the old way of self restarting
+ * itimers, as the SIGALRM is a legacy signal and only
+ * queued once. Changing the restart behaviour to
+ * restart the timer in the signal dequeue path is
+ * reducing the timer noise on heavy loaded !highres
+ * systems too.
+ */
+ if (unlikely(signr == SIGALRM)) {
+ struct hrtimer *tmr = &tsk->signal->real_timer;
+
+ if (!hrtimer_is_queued(tmr) &&
+ tsk->signal->it_real_incr.tv64 != 0) {
+ hrtimer_forward(tmr, tmr->base->get_time(),
+ tsk->signal->it_real_incr);
+ hrtimer_restart(tmr);
+ }
+ }
+ }
+ recalc_sigpending();
+ if (signr && unlikely(sig_kernel_stop(signr))) {
+ /*
+ * Set a marker that we have dequeued a stop signal. Our
+ * caller might release the siglock and then the pending
+ * stop signal it is about to process is no longer in the
+ * pending bitmasks, but must still be cleared by a SIGCONT
+ * (and overruled by a SIGKILL). So those cases clear this
+ * shared flag after we've set it. Note that this flag may
+ * remain set after the signal we return is ignored or
+ * handled. That doesn't matter because its only purpose
+ * is to alert stop-signal processing code when another
+ * processor has come along and cleared the flag.
+ */
+ if (!(tsk->signal->flags & SIGNAL_GROUP_EXIT))
+ tsk->signal->flags |= SIGNAL_STOP_DEQUEUED;
+ }
+ if (signr &&
((info->si_code & __SI_MASK) == __SI_TIMER) &&
info->si_sys_private){
/*
set_tsk_thread_flag(t, TIF_SIGPENDING);
/*
- * For SIGKILL, we want to wake it up in the stopped/traced case.
- * We don't check t->state here because there is a race with it
+ * For SIGKILL, we want to wake it up in the stopped/traced/killable
+ * case. We don't check t->state here because there is a race with it
* executing another processor and just now entering stopped state.
* By using wake_up_state, we ensure the process will wake up and
* handle its death signal.
*/
mask = TASK_INTERRUPTIBLE;
if (resume)
- mask |= TASK_STOPPED | TASK_TRACED;
+ mask |= TASK_WAKEKILL;
if (!wake_up_state(t, mask))
kick_process(t);
}
int error = -EINVAL;
if (!valid_signal(sig))
return error;
- error = -EPERM;
- if ((info == SEND_SIG_NOINFO || (!is_si_special(info) && SI_FROMUSER(info)))
- && ((sig != SIGCONT) ||
- (current->signal->session != t->signal->session))
- && (current->euid ^ t->suid) && (current->euid ^ t->uid)
- && (current->uid ^ t->suid) && (current->uid ^ t->uid)
- && !capable(CAP_KILL))
+
+ if (info == SEND_SIG_NOINFO || (!is_si_special(info) && SI_FROMUSER(info))) {
+ error = audit_signal_info(sig, t); /* Let audit system see the signal */
+ if (error)
+ return error;
+ error = -EPERM;
+ if (((sig != SIGCONT) ||
+ (task_session_nr(current) != task_session_nr(t)))
+ && (current->euid ^ t->suid) && (current->euid ^ t->uid)
+ && (current->uid ^ t->suid) && (current->uid ^ t->uid)
+ && !capable(CAP_KILL))
return error;
+ }
- error = security_task_kill(t, info, sig);
- if (!error)
- audit_signal_info(sig, t); /* Let audit system see the signal */
- return error;
+ return security_task_kill(t, info, sig, 0);
}
/* forward decl */
* Wake up the stopped thread _after_ setting
* TIF_SIGPENDING
*/
- state = TASK_STOPPED;
+ state = __TASK_STOPPED;
if (sig_user_defined(t, SIGCONT) && !sigismember(&t->blocked, SIGCONT)) {
set_tsk_thread_flag(t, TIF_SIGPENDING);
state |= TASK_INTERRUPTIBLE;
int ret = 0;
/*
+ * Deliver the signal to listening signalfds. This must be called
+ * with the sighand lock held.
+ */
+ signalfd_notify(t, sig);
+
+ /*
* fast-pathed signals for kernel-internal things like SIGSTOP
* or SIGKILL.
*/
q->info.si_signo = sig;
q->info.si_errno = 0;
q->info.si_code = SI_USER;
- q->info.si_pid = current->pid;
+ q->info.si_pid = task_pid_vnr(current);
q->info.si_uid = current->uid;
break;
case (unsigned long) SEND_SIG_PRIV:
#define LEGACY_QUEUE(sigptr, sig) \
(((sig) < SIGRTMIN) && sigismember(&(sigptr)->signal, (sig)))
+int print_fatal_signals;
+
+static void print_fatal_signal(struct pt_regs *regs, int signr)
+{
+ printk("%s/%d: potentially unexpected fatal signal %d.\n",
+ current->comm, task_pid_nr(current), signr);
+
+#if defined(__i386__) && !defined(__arch_um__)
+ printk("code at %08lx: ", regs->ip);
+ {
+ int i;
+ for (i = 0; i < 16; i++) {
+ unsigned char insn;
+
+ __get_user(insn, (unsigned char *)(regs->ip + i));
+ printk("%02x ", insn);
+ }
+ }
+#endif
+ printk("\n");
+ show_regs(regs);
+}
+
+static int __init setup_print_fatal_signals(char *str)
+{
+ get_option (&str, &print_fatal_signals);
+
+ return 1;
+}
+
+__setup("print-fatal-signals=", setup_print_fatal_signals);
static int
specific_send_sig_info(int sig, struct siginfo *info, struct task_struct *t)
{
int ret = 0;
- if (!irqs_disabled())
- BUG();
+ BUG_ON(!irqs_disabled());
assert_spin_locked(&t->sighand->siglock);
/* Short-circuit ignored signals. */
/*
* Force a signal that the process can't ignore: if necessary
* we unblock the signal and change any SIG_IGN to SIG_DFL.
+ *
+ * Note: If we unblock the signal, we always reset it to SIG_DFL,
+ * since we do not want to have a signal handler that was blocked
+ * be invoked when user space had explicitly blocked it.
+ *
+ * We don't want to have recursive SIGSEGV's etc, for example.
*/
-
int
force_sig_info(int sig, struct siginfo *info, struct task_struct *t)
{
unsigned long int flags;
- int ret;
+ int ret, blocked, ignored;
+ struct k_sigaction *action;
spin_lock_irqsave(&t->sighand->siglock, flags);
- if (t->sighand->action[sig-1].sa.sa_handler == SIG_IGN) {
- t->sighand->action[sig-1].sa.sa_handler = SIG_DFL;
- }
- if (sigismember(&t->blocked, sig)) {
- sigdelset(&t->blocked, sig);
+ action = &t->sighand->action[sig-1];
+ ignored = action->sa.sa_handler == SIG_IGN;
+ blocked = sigismember(&t->blocked, sig);
+ if (blocked || ignored) {
+ action->sa.sa_handler = SIG_DFL;
+ if (blocked) {
+ sigdelset(&t->blocked, sig);
+ recalc_sigpending_and_wake(t);
+ }
}
- recalc_sigpending_tsk(t);
ret = specific_send_sig_info(sig, info, t);
spin_unlock_irqrestore(&t->sighand->siglock, flags);
return 0;
if (sig == SIGKILL)
return 1;
- if (p->state & (TASK_STOPPED | TASK_TRACED))
+ if (task_is_stopped_or_traced(p))
return 0;
return task_curr(p) || !signal_pending(p);
}
if (t == NULL)
/* restart balancing at this thread */
t = p->signal->curr_target = p;
- BUG_ON(t->tgid != p->tgid);
while (!wants_signal(sig, t)) {
t = next_thread(t);
do {
sigaddset(&t->pending.signal, SIGKILL);
signal_wake_up(t, 1);
- t = next_thread(t);
- } while (t != p);
+ } while_each_thread(p, t);
return;
}
-
- /*
- * There will be a core dump. We make all threads other
- * than the chosen one go into a group stop so that nothing
- * happens until it gets scheduled, takes the signal off
- * the shared queue, and does the core dump. This is a
- * little more complicated than strictly necessary, but it
- * keeps the signal state that winds up in the core dump
- * unchanged from the death state, e.g. which thread had
- * the core-dump signal unblocked.
- */
- rm_from_queue(SIG_KERNEL_STOP_MASK, &t->pending);
- rm_from_queue(SIG_KERNEL_STOP_MASK, &p->signal->shared_pending);
- p->signal->group_stop_count = 0;
- p->signal->group_exit_task = t;
- t = p;
- do {
- p->signal->group_stop_count++;
- signal_wake_up(t, 0);
- t = next_thread(t);
- } while (t != p);
- wake_up_process(p->signal->group_exit_task);
- return;
}
/*
{
struct task_struct *t;
- p->signal->flags = SIGNAL_GROUP_EXIT;
p->signal->group_stop_count = 0;
- if (thread_group_empty(p))
- return;
-
for (t = next_thread(p); t != p; t = next_thread(t)) {
/*
* Don't bother with already dead threads
if (t->exit_state)
continue;
- /*
- * We don't want to notify the parent, since we are
- * killed as part of a thread group due to another
- * thread doing an execve() or similar. So set the
- * exit signal to -1 to allow immediate reaping of
- * the process. But don't detach the thread group
- * leader.
- */
- if (t != p->group_leader)
- t->exit_signal = -1;
-
/* SIGKILL will be handled before any pending SIGSTOP */
sigaddset(&t->pending.signal, SIGKILL);
signal_wake_up(t, 1);
}
}
+int __fatal_signal_pending(struct task_struct *tsk)
+{
+ return sigismember(&tsk->pending.signal, SIGKILL);
+}
+EXPORT_SYMBOL(__fatal_signal_pending);
+
/*
* Must be called under rcu_read_lock() or with tasklist_lock read-held.
*/
}
/*
- * kill_pg_info() sends a signal to a process group: this is what the tty
+ * __kill_pgrp_info() sends a signal to a process group: this is what the tty
* control characters do (^C, ^Z etc)
*/
-int __kill_pg_info(int sig, struct siginfo *info, pid_t pgrp)
+int __kill_pgrp_info(int sig, struct siginfo *info, struct pid *pgrp)
{
struct task_struct *p = NULL;
int retval, success;
- if (pgrp <= 0)
- return -EINVAL;
-
success = 0;
retval = -ESRCH;
- do_each_task_pid(pgrp, PIDTYPE_PGID, p) {
+ do_each_pid_task(pgrp, PIDTYPE_PGID, p) {
int err = group_send_sig_info(sig, info, p);
success |= !err;
retval = err;
- } while_each_task_pid(pgrp, PIDTYPE_PGID, p);
+ } while_each_pid_task(pgrp, PIDTYPE_PGID, p);
return success ? 0 : retval;
}
-int
-kill_pg_info(int sig, struct siginfo *info, pid_t pgrp)
+int kill_pid_info(int sig, struct siginfo *info, struct pid *pid)
{
- int retval;
+ int error = -ESRCH;
+ struct task_struct *p;
- read_lock(&tasklist_lock);
- retval = __kill_pg_info(sig, info, pgrp);
- read_unlock(&tasklist_lock);
+ rcu_read_lock();
+ if (unlikely(sig_needs_tasklist(sig)))
+ read_lock(&tasklist_lock);
- return retval;
+retry:
+ p = pid_task(pid, PIDTYPE_PID);
+ if (p) {
+ error = group_send_sig_info(sig, info, p);
+ if (unlikely(error == -ESRCH))
+ /*
+ * The task was unhashed in between, try again.
+ * If it is dead, pid_task() will return NULL,
+ * if we race with de_thread() it will find the
+ * new leader.
+ */
+ goto retry;
+ }
+
+ if (unlikely(sig_needs_tasklist(sig)))
+ read_unlock(&tasklist_lock);
+ rcu_read_unlock();
+ return error;
}
int
kill_proc_info(int sig, struct siginfo *info, pid_t pid)
{
int error;
- int acquired_tasklist_lock = 0;
- struct task_struct *p;
-
rcu_read_lock();
- if (unlikely(sig_needs_tasklist(sig))) {
- read_lock(&tasklist_lock);
- acquired_tasklist_lock = 1;
- }
- p = find_task_by_pid(pid);
- error = -ESRCH;
- if (p)
- error = group_send_sig_info(sig, info, p);
- if (unlikely(acquired_tasklist_lock))
- read_unlock(&tasklist_lock);
+ error = kill_pid_info(sig, info, find_vpid(pid));
rcu_read_unlock();
return error;
}
-/* like kill_proc_info(), but doesn't use uid/euid of "current" */
-int kill_proc_info_as_uid(int sig, struct siginfo *info, pid_t pid,
- uid_t uid, uid_t euid)
+/* like kill_pid_info(), but doesn't use uid/euid of "current" */
+int kill_pid_info_as_uid(int sig, struct siginfo *info, struct pid *pid,
+ uid_t uid, uid_t euid, u32 secid)
{
int ret = -EINVAL;
struct task_struct *p;
return ret;
read_lock(&tasklist_lock);
- p = find_task_by_pid(pid);
+ p = pid_task(pid, PIDTYPE_PID);
if (!p) {
ret = -ESRCH;
goto out_unlock;
ret = -EPERM;
goto out_unlock;
}
+ ret = security_task_kill(p, info, sig, secid);
+ if (ret)
+ goto out_unlock;
if (sig && p->sighand) {
unsigned long flags;
spin_lock_irqsave(&p->sighand->siglock, flags);
read_unlock(&tasklist_lock);
return ret;
}
-EXPORT_SYMBOL_GPL(kill_proc_info_as_uid);
+EXPORT_SYMBOL_GPL(kill_pid_info_as_uid);
/*
* kill_something_info() interprets pid in interesting ways just like kill(2).
static int kill_something_info(int sig, struct siginfo *info, int pid)
{
- if (!pid) {
- return kill_pg_info(sig, info, process_group(current));
- } else if (pid == -1) {
+ int ret;
+
+ if (pid > 0) {
+ rcu_read_lock();
+ ret = kill_pid_info(sig, info, find_vpid(pid));
+ rcu_read_unlock();
+ return ret;
+ }
+
+ read_lock(&tasklist_lock);
+ if (pid != -1) {
+ ret = __kill_pgrp_info(sig, info,
+ pid ? find_vpid(-pid) : task_pgrp(current));
+ } else {
int retval = 0, count = 0;
struct task_struct * p;
- read_lock(&tasklist_lock);
for_each_process(p) {
- if (p->pid > 1 && p->tgid != current->tgid) {
+ if (p->pid > 1 && !same_thread_group(p, current)) {
int err = group_send_sig_info(sig, info, p);
++count;
if (err != -EPERM)
retval = err;
}
}
- read_unlock(&tasklist_lock);
- return count ? retval : -ESRCH;
- } else if (pid < 0) {
- return kill_pg_info(sig, info, -pid);
- } else {
- return kill_proc_info(sig, info, pid);
+ ret = count ? retval : -ESRCH;
}
+ read_unlock(&tasklist_lock);
+
+ return ret;
}
/*
return send_sig_info(sig, __si_special(priv), p);
}
-/*
- * This is the entry point for "process-wide" signals.
- * They will go to an appropriate thread in the thread group.
- */
-int
-send_group_sig_info(int sig, struct siginfo *info, struct task_struct *p)
-{
- int ret;
- read_lock(&tasklist_lock);
- ret = group_send_sig_info(sig, info, p);
- read_unlock(&tasklist_lock);
- return ret;
-}
-
void
force_sig(int sig, struct task_struct *p)
{
return 0;
}
-int
-kill_pg(pid_t pgrp, int sig, int priv)
+int kill_pgrp(struct pid *pid, int sig, int priv)
+{
+ int ret;
+
+ read_lock(&tasklist_lock);
+ ret = __kill_pgrp_info(sig, __si_special(priv), pid);
+ read_unlock(&tasklist_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL(kill_pgrp);
+
+int kill_pid(struct pid *pid, int sig, int priv)
{
- return kill_pg_info(sig, __si_special(priv), pgrp);
+ return kill_pid_info(sig, __si_special(priv), pid);
}
+EXPORT_SYMBOL(kill_pid);
int
kill_proc(pid_t pid, int sig, int priv)
{
- return kill_proc_info(sig, __si_special(priv), pid);
+ int ret;
+
+ rcu_read_lock();
+ ret = kill_pid_info(sig, __si_special(priv), find_pid(pid));
+ rcu_read_unlock();
+ return ret;
}
/*
void sigqueue_free(struct sigqueue *q)
{
unsigned long flags;
+ spinlock_t *lock = ¤t->sighand->siglock;
+
BUG_ON(!(q->flags & SIGQUEUE_PREALLOC));
/*
* If the signal is still pending remove it from the
- * pending queue.
+ * pending queue. We must hold ->siglock while testing
+ * q->list to serialize with collect_signal().
*/
- if (unlikely(!list_empty(&q->list))) {
- spinlock_t *lock = ¤t->sighand->siglock;
- read_lock(&tasklist_lock);
- spin_lock_irqsave(lock, flags);
- if (!list_empty(&q->list))
- list_del_init(&q->list);
- spin_unlock_irqrestore(lock, flags);
- read_unlock(&tasklist_lock);
- }
+ spin_lock_irqsave(lock, flags);
+ if (!list_empty(&q->list))
+ list_del_init(&q->list);
+ spin_unlock_irqrestore(lock, flags);
+
q->flags &= ~SIGQUEUE_PREALLOC;
__sigqueue_free(q);
}
ret = 1;
goto out;
}
+ /*
+ * Deliver the signal to listening signalfds. This must be called
+ * with the sighand lock held.
+ */
+ signalfd_notify(p, sig);
list_add_tail(&q->list, &p->pending.list);
sigaddset(&p->pending.signal, sig);
* the overrun count. Other uses should not try to
* send the signal multiple times.
*/
- if (q->info.si_code != SI_TIMER)
- BUG();
+ BUG_ON(q->info.si_code != SI_TIMER);
q->info.si_overrun++;
goto out;
}
+ /*
+ * Deliver the signal to listening signalfds. This must be called
+ * with the sighand lock held.
+ */
+ signalfd_notify(p, sig);
/*
* Put this signal on the shared-pending queue.
BUG_ON(sig == -1);
/* do_notify_parent_cldstop should have been called instead. */
- BUG_ON(tsk->state & (TASK_STOPPED|TASK_TRACED));
+ BUG_ON(task_is_stopped_or_traced(tsk));
BUG_ON(!tsk->ptrace &&
(tsk->group_leader != tsk || !thread_group_empty(tsk)));
info.si_signo = sig;
info.si_errno = 0;
- info.si_pid = tsk->pid;
+ /*
+ * we are under tasklist_lock here so our parent is tied to
+ * us and cannot exit and release its namespace.
+ *
+ * the only it can is to switch its nsproxy with sys_unshare,
+ * bu uncharing pid namespaces is not allowed, so we'll always
+ * see relevant namespace
+ *
+ * write_lock() currently calls preempt_disable() which is the
+ * same as rcu_read_lock(), but according to Oleg, this is not
+ * correct to rely on this
+ */
+ rcu_read_lock();
+ info.si_pid = task_pid_nr_ns(tsk, tsk->parent->nsproxy->pid_ns);
+ rcu_read_unlock();
+
info.si_uid = tsk->uid;
/* FIXME: find out whether or not this is supposed to be c*time. */
info.si_signo = SIGCHLD;
info.si_errno = 0;
- info.si_pid = tsk->pid;
+ /*
+ * see comment in do_notify_parent() abot the following 3 lines
+ */
+ rcu_read_lock();
+ info.si_pid = task_pid_nr_ns(tsk, tsk->parent->nsproxy->pid_ns);
+ rcu_read_unlock();
+
info.si_uid = tsk->uid;
/* FIXME: find out whether or not this is supposed to be c*time. */
spin_unlock_irqrestore(&sighand->siglock, flags);
}
+static inline int may_ptrace_stop(void)
+{
+ if (!likely(current->ptrace & PT_PTRACED))
+ return 0;
+ /*
+ * Are we in the middle of do_coredump?
+ * If so and our tracer is also part of the coredump stopping
+ * is a deadlock situation, and pointless because our tracer
+ * is dead so don't allow us to stop.
+ * If SIGKILL was already sent before the caller unlocked
+ * ->siglock we must see ->core_waiters != 0. Otherwise it
+ * is safe to enter schedule().
+ */
+ if (unlikely(current->mm->core_waiters) &&
+ unlikely(current->mm == current->parent->mm))
+ return 0;
+
+ return 1;
+}
+
+/*
+ * Return nonzero if there is a SIGKILL that should be waking us up.
+ * Called with the siglock held.
+ */
+static int sigkill_pending(struct task_struct *tsk)
+{
+ return ((sigismember(&tsk->pending.signal, SIGKILL) ||
+ sigismember(&tsk->signal->shared_pending.signal, SIGKILL)) &&
+ !unlikely(sigismember(&tsk->blocked, SIGKILL)));
+}
+
/*
* This must be called with current->sighand->siglock held.
*
* That makes it a way to test a stopped process for
* being ptrace-stopped vs being job-control-stopped.
*
- * If we actually decide not to stop at all because the tracer is gone,
- * we leave nostop_code in current->exit_code.
+ * If we actually decide not to stop at all because the tracer
+ * is gone, we keep current->exit_code unless clear_code.
*/
-static void ptrace_stop(int exit_code, int nostop_code, siginfo_t *info)
+static void ptrace_stop(int exit_code, int clear_code, siginfo_t *info)
{
+ int killed = 0;
+
+ if (arch_ptrace_stop_needed(exit_code, info)) {
+ /*
+ * The arch code has something special to do before a
+ * ptrace stop. This is allowed to block, e.g. for faults
+ * on user stack pages. We can't keep the siglock while
+ * calling arch_ptrace_stop, so we must release it now.
+ * To preserve proper semantics, we must do this before
+ * any signal bookkeeping like checking group_stop_count.
+ * Meanwhile, a SIGKILL could come in before we retake the
+ * siglock. That must prevent us from sleeping in TASK_TRACED.
+ * So after regaining the lock, we must check for SIGKILL.
+ */
+ spin_unlock_irq(¤t->sighand->siglock);
+ arch_ptrace_stop(exit_code, info);
+ spin_lock_irq(¤t->sighand->siglock);
+ killed = sigkill_pending(current);
+ }
+
/*
* If there is a group stop in progress,
* we must participate in the bookkeeping.
current->exit_code = exit_code;
/* Let the debugger run. */
- set_current_state(TASK_TRACED);
+ __set_current_state(TASK_TRACED);
spin_unlock_irq(¤t->sighand->siglock);
read_lock(&tasklist_lock);
- if (likely(current->ptrace & PT_PTRACED) &&
- likely(current->parent != current->real_parent ||
- !(current->ptrace & PT_ATTACHED)) &&
- (likely(current->parent->signal != current->signal) ||
- !unlikely(current->signal->flags & SIGNAL_GROUP_EXIT))) {
+ if (!unlikely(killed) && may_ptrace_stop()) {
do_notify_parent_cldstop(current, CLD_TRAPPED);
read_unlock(&tasklist_lock);
schedule();
} else {
/*
* By the time we got the lock, our tracer went away.
- * Don't stop here.
+ * Don't drop the lock yet, another tracer may come.
*/
+ __set_current_state(TASK_RUNNING);
+ if (clear_code)
+ current->exit_code = 0;
read_unlock(&tasklist_lock);
- set_current_state(TASK_RUNNING);
- current->exit_code = nostop_code;
}
/*
+ * While in TASK_TRACED, we were considered "frozen enough".
+ * Now that we woke up, it's crucial if we're supposed to be
+ * frozen that we freeze now before running anything substantial.
+ */
+ try_to_freeze();
+
+ /*
* We are back. Now reacquire the siglock before touching
* last_siginfo, so that we are sure to have synchronized with
* any signal-sending on another CPU that wants to examine it.
/*
* Queued signals ignored us while we were stopped for tracing.
* So check for any that we should take before resuming user mode.
+ * This sets TIF_SIGPENDING, but never clears it.
*/
- recalc_sigpending();
+ recalc_sigpending_tsk(current);
}
void ptrace_notify(int exit_code)
memset(&info, 0, sizeof info);
info.si_signo = SIGTRAP;
info.si_code = exit_code;
- info.si_pid = current->pid;
+ info.si_pid = task_pid_vnr(current);
info.si_uid = current->uid;
/* Let the debugger run. */
spin_lock_irq(¤t->sighand->siglock);
- ptrace_stop(exit_code, 0, &info);
+ ptrace_stop(exit_code, 1, &info);
spin_unlock_irq(¤t->sighand->siglock);
}
read_unlock(&tasklist_lock);
}
- schedule();
+ do {
+ schedule();
+ } while (try_to_freeze());
/*
* Now we don't run again until continued.
*/
struct signal_struct *sig = current->signal;
int stop_count;
- if (!likely(sig->flags & SIGNAL_STOP_DEQUEUED))
- return 0;
-
if (sig->group_stop_count > 0) {
/*
* There is a group stop in progress. We don't need to
*/
stop_count = --sig->group_stop_count;
} else {
+ struct task_struct *t;
+
+ if (!likely(sig->flags & SIGNAL_STOP_DEQUEUED) ||
+ unlikely(sig->group_exit_task))
+ return 0;
/*
* There is no group stop already in progress.
* We must initiate one now.
*/
- struct task_struct *t;
-
sig->group_exit_code = signr;
stop_count = 0;
* stop is always done with the siglock held,
* so this check has no races.
*/
- if (!t->exit_state &&
- !(t->state & (TASK_STOPPED|TASK_TRACED))) {
+ if (!(t->flags & PF_EXITING) &&
+ !task_is_stopped_or_traced(t)) {
stop_count++;
signal_wake_up(t, 0);
}
return 1;
}
-/*
- * Do appropriate magic when group_stop_count > 0.
- * We return nonzero if we stopped, after releasing the siglock.
- * We return zero if we still hold the siglock and should look
- * for another signal without checking group_stop_count again.
- */
-static int handle_group_stop(void)
-{
- int stop_count;
-
- if (current->signal->group_exit_task == current) {
- /*
- * Group stop is so we can do a core dump,
- * We are the initiating thread, so get on with it.
- */
- current->signal->group_exit_task = NULL;
- return 0;
- }
-
- if (current->signal->flags & SIGNAL_GROUP_EXIT)
- /*
- * Group stop is so another thread can do a core dump,
- * or else we are racing against a death signal.
- * Just punt the stop so we can get the next signal.
- */
- return 0;
-
- /*
- * There is a group stop in progress. We stop
- * without any associated signal being in our queue.
- */
- stop_count = --current->signal->group_stop_count;
- if (stop_count == 0)
- current->signal->flags = SIGNAL_STOP_STOPPED;
- current->exit_code = current->signal->group_exit_code;
- set_current_state(TASK_STOPPED);
- spin_unlock_irq(¤t->sighand->siglock);
- finish_stop(stop_count);
- return 1;
-}
-
int get_signal_to_deliver(siginfo_t *info, struct k_sigaction *return_ka,
struct pt_regs *regs, void *cookie)
{
sigset_t *mask = ¤t->blocked;
int signr = 0;
+relock:
+ /*
+ * We'll jump back here after any time we were stopped in TASK_STOPPED.
+ * While in TASK_STOPPED, we were considered "frozen enough".
+ * Now that we woke up, it's crucial if we're supposed to be
+ * frozen that we freeze now before running anything substantial.
+ */
try_to_freeze();
-relock:
spin_lock_irq(¤t->sighand->siglock);
for (;;) {
struct k_sigaction *ka;
if (unlikely(current->signal->group_stop_count > 0) &&
- handle_group_stop())
+ do_signal_stop(0))
goto relock;
signr = dequeue_signal(current, mask, info);
ptrace_signal_deliver(regs, cookie);
/* Let the debugger run. */
- ptrace_stop(signr, signr, info);
+ ptrace_stop(signr, 0, info);
- /* We're back. Did the debugger cancel the sig or group_exit? */
+ /* We're back. Did the debugger cancel the sig? */
signr = current->exit_code;
- if (signr == 0 || current->signal->flags & SIGNAL_GROUP_EXIT)
+ if (signr == 0)
continue;
current->exit_code = 0;
info->si_signo = signr;
info->si_errno = 0;
info->si_code = SI_USER;
- info->si_pid = current->parent->pid;
+ info->si_pid = task_pid_vnr(current->parent);
info->si_uid = current->parent->uid;
}
if (sig_kernel_ignore(signr)) /* Default is nothing. */
continue;
- /* Init gets no signals it doesn't want. */
- if (current == child_reaper)
+ /*
+ * Global init gets no signals it doesn't want.
+ */
+ if (is_global_init(current))
continue;
if (sig_kernel_stop(signr)) {
/* signals can be posted during this window */
- if (is_orphaned_pgrp(process_group(current)))
+ if (is_current_pgrp_orphaned())
goto relock;
spin_lock_irq(¤t->sighand->siglock);
* Anything else is fatal, maybe with a core dump.
*/
current->flags |= PF_SIGNALED;
+ if ((signr != SIGKILL) && print_fatal_signals)
+ print_fatal_signal(regs, signr);
if (sig_kernel_coredump(signr)) {
/*
* If it was able to dump core, this kills all
return signr;
}
+void exit_signals(struct task_struct *tsk)
+{
+ int group_stop = 0;
+ struct task_struct *t;
+
+ if (thread_group_empty(tsk) || signal_group_exit(tsk->signal)) {
+ tsk->flags |= PF_EXITING;
+ return;
+ }
+
+ spin_lock_irq(&tsk->sighand->siglock);
+ /*
+ * From now this task is not visible for group-wide signals,
+ * see wants_signal(), do_signal_stop().
+ */
+ tsk->flags |= PF_EXITING;
+ if (!signal_pending(tsk))
+ goto out;
+
+ /* It could be that __group_complete_signal() choose us to
+ * notify about group-wide signal. Another thread should be
+ * woken now to take the signal since we will not.
+ */
+ for (t = tsk; (t = next_thread(t)) != tsk; )
+ if (!signal_pending(t) && !(t->flags & PF_EXITING))
+ recalc_sigpending_and_wake(t);
+
+ if (unlikely(tsk->signal->group_stop_count) &&
+ !--tsk->signal->group_stop_count) {
+ tsk->signal->flags = SIGNAL_STOP_STOPPED;
+ group_stop = 1;
+ }
+out:
+ spin_unlock_irq(&tsk->sighand->siglock);
+
+ if (unlikely(group_stop)) {
+ read_lock(&tasklist_lock);
+ do_notify_parent_cldstop(tsk, CLD_STOPPED);
+ read_unlock(&tasklist_lock);
+ }
+}
+
EXPORT_SYMBOL(recalc_sigpending);
EXPORT_SYMBOL_GPL(dequeue_signal);
EXPORT_SYMBOL(flush_signals);
EXPORT_SYMBOL(force_sig);
-EXPORT_SYMBOL(kill_pg);
EXPORT_SYMBOL(kill_proc);
EXPORT_SYMBOL(ptrace_notify);
EXPORT_SYMBOL(send_sig);
/*
* If you change siginfo_t structure, please be sure
* this code is fixed accordingly.
+ * Please remember to update the signalfd_copyinfo() function
+ * inside fs/signalfd.c too, in case siginfo_t changes.
* It should never copy any pad contained in the structure
* to avoid security leaks, but must copy the generic
* 3 ints plus the relevant union member.
info.si_signo = sig;
info.si_errno = 0;
info.si_code = SI_USER;
- info.si_pid = current->tgid;
+ info.si_pid = task_tgid_vnr(current);
info.si_uid = current->uid;
return kill_something_info(sig, &info, pid);
info.si_signo = sig;
info.si_errno = 0;
info.si_code = SI_TKILL;
- info.si_pid = current->tgid;
+ info.si_pid = task_tgid_vnr(current);
info.si_uid = current->uid;
read_lock(&tasklist_lock);
- p = find_task_by_pid(pid);
- if (p && (tgid <= 0 || p->tgid == tgid)) {
+ p = find_task_by_vpid(pid);
+ if (p && (tgid <= 0 || task_tgid_vnr(p) == tgid)) {
error = check_kill_permission(sig, &info, p);
/*
* The null signal is a permissions and process existence
* @pid: the PID of the thread
* @sig: signal to be sent
*
- * This syscall also checks the tgid and returns -ESRCH even if the PID
+ * This syscall also checks the @tgid and returns -ESRCH even if the PID
* exists but it's not belonging to the target process anymore. This
* method solves the problem of threads exiting and PIDs getting reused.
*/
k = ¤t->sighand->action[sig-1];
spin_lock_irq(¤t->sighand->siglock);
- if (signal_pending(current)) {
- /*
- * If there might be a fatal signal pending on multiple
- * threads, make sure we take it before changing the action.
- */
- spin_unlock_irq(¤t->sighand->siglock);
- return -ERESTARTNOINTR;
- }
-
if (oact)
*oact = *k;
rm_from_queue_full(&mask, &t->signal->shared_pending);
do {
rm_from_queue_full(&mask, &t->pending);
- recalc_sigpending_tsk(t);
t = next_thread(t);
} while (t != current);
}
}
#endif /* __ARCH_WANT_SYS_RT_SIGSUSPEND */
+__attribute__((weak)) const char *arch_vma_name(struct vm_area_struct *vma)
+{
+ return NULL;
+}
+
void __init signals_init(void)
{
- sigqueue_cachep =
- kmem_cache_create("sigqueue",
- sizeof(struct sigqueue),
- __alignof__(struct sigqueue),
- SLAB_PANIC, NULL, NULL);
+ sigqueue_cachep = KMEM_CACHE(sigqueue, SLAB_PANIC);
}