#include <linux/init.h>
#include <linux/smp_lock.h>
#include <linux/initrd.h>
-#include <linux/hdreg.h>
#include <linux/bootmem.h>
#include <linux/tty.h>
#include <linux/gfp.h>
#include <linux/percpu.h>
#include <linux/kmod.h>
+#include <linux/vmalloc.h>
#include <linux/kernel_stat.h>
#include <linux/start_kernel.h>
#include <linux/security.h>
+#include <linux/smp.h>
#include <linux/workqueue.h>
#include <linux/profile.h>
#include <linux/rcupdate.h>
#include <linux/sched.h>
#include <linux/signal.h>
#include <linux/idr.h>
+#include <linux/ftrace.h>
#include <asm/io.h>
#include <asm/bugs.h>
extern void fork_init(unsigned long);
extern void mca_init(void);
extern void sbus_init(void);
-extern void pidhash_init(void);
-extern void pidmap_init(void);
extern void prio_tree_init(void);
extern void radix_tree_init(void);
extern void free_initmem(void);
{
unsigned int cpu;
+ /*
+ * Set up the current CPU as possible to migrate to.
+ * The other ones will be done by cpu_up/cpu_down()
+ */
+ cpu = smp_processor_id();
+ cpu_set(cpu, cpu_active_map);
+
/* FIXME: This should be done in userspace --RR */
for_each_present_cpu(cpu) {
if (num_online_cpus() >= setup_max_cpus)
softirq_init();
timekeeping_init();
time_init();
+ sched_clock_init();
profile_init();
if (!irqs_disabled())
printk("start_kernel(): bug: interrupts were enabled early\n");
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start && !initrd_below_start_ok &&
- initrd_start < min_low_pfn << PAGE_SHIFT) {
+ page_to_pfn(virt_to_page((void *)initrd_start)) < min_low_pfn) {
printk(KERN_CRIT "initrd overwritten (0x%08lx < 0x%08lx) - "
- "disabling it.\n",initrd_start,min_low_pfn << PAGE_SHIFT);
+ "disabling it.\n",
+ page_to_pfn(virt_to_page((void *)initrd_start)),
+ min_low_pfn);
initrd_start = 0;
}
#endif
+ vmalloc_init();
vfs_caches_init_early();
cpuset_init_early();
mem_init();
acpi_early_init(); /* before LAPIC and SMP init */
+ ftrace_init();
+
/* Do the rest non-__init'ed, we're now alive */
rest_init();
}
-static int __initdata initcall_debug;
+static int initcall_debug;
static int __init initcall_debug_setup(char *str)
{
}
__setup("initcall_debug", initcall_debug_setup);
-extern initcall_t __initcall_start[], __initcall_end[];
-
-static void __init do_initcalls(void)
+int do_one_initcall(initcall_t fn)
{
- initcall_t *call;
int count = preempt_count();
+ ktime_t delta;
+ char msgbuf[64];
+ struct boot_trace it;
+
+ if (initcall_debug) {
+ it.caller = task_pid_nr(current);
+ printk("calling %pF @ %i\n", fn, it.caller);
+ it.calltime = ktime_get();
+ }
- for (call = __initcall_start; call < __initcall_end; call++) {
- ktime_t t0, t1, delta;
- char *msg = NULL;
- char msgbuf[40];
- int result;
+ it.result = fn();
- if (initcall_debug) {
- print_fn_descriptor_symbol("calling %s()\n",
- (unsigned long) *call);
- t0 = ktime_get();
- }
-
- result = (*call)();
+ if (initcall_debug) {
+ it.rettime = ktime_get();
+ delta = ktime_sub(it.rettime, it.calltime);
+ it.duration = (unsigned long long) delta.tv64 >> 10;
+ printk("initcall %pF returned %d after %Ld usecs\n", fn,
+ it.result, it.duration);
+ trace_boot(&it, fn);
+ }
- if (initcall_debug) {
- t1 = ktime_get();
- delta = ktime_sub(t1, t0);
+ msgbuf[0] = 0;
- print_fn_descriptor_symbol("initcall %s()",
- (unsigned long) *call);
- printk(" returned %d after %Ld msecs\n", result,
- (unsigned long long) delta.tv64 >> 20);
- }
+ if (it.result && it.result != -ENODEV && initcall_debug)
+ sprintf(msgbuf, "error code %d ", it.result);
- if (result && result != -ENODEV && initcall_debug) {
- sprintf(msgbuf, "error code %d", result);
- msg = msgbuf;
- }
- if (preempt_count() != count) {
- msg = "preemption imbalance";
- preempt_count() = count;
- }
- if (irqs_disabled()) {
- msg = "disabled interrupts";
- local_irq_enable();
- }
- if (msg) {
- print_fn_descriptor_symbol(KERN_WARNING "initcall %s()",
- (unsigned long) *call);
- printk(" returned with %s\n", msg);
- }
+ if (preempt_count() != count) {
+ strlcat(msgbuf, "preemption imbalance ", sizeof(msgbuf));
+ preempt_count() = count;
+ }
+ if (irqs_disabled()) {
+ strlcat(msgbuf, "disabled interrupts ", sizeof(msgbuf));
+ local_irq_enable();
}
+ if (msgbuf[0]) {
+ printk("initcall %pF returned with %s\n", fn, msgbuf);
+ }
+
+ return it.result;
+}
+
+
+extern initcall_t __initcall_start[], __initcall_end[], __early_initcall_end[];
+
+static void __init do_initcalls(void)
+{
+ initcall_t *call;
+
+ for (call = __early_initcall_end; call < __initcall_end; call++)
+ do_one_initcall(*call);
/* Make sure there is no pending stuff from the initcall sequence */
flush_scheduled_work();
*/
static void __init do_basic_setup(void)
{
+ rcu_init_sched(); /* needed by module_init stage. */
/* drivers will send hotplug events */
init_workqueues();
usermodehelper_init();
do_initcalls();
}
-static int __initdata nosoftlockup;
-
-static int __init nosoftlockup_setup(char *str)
-{
- nosoftlockup = 1;
- return 1;
-}
-__setup("nosoftlockup", nosoftlockup_setup);
-
static void __init do_pre_smp_initcalls(void)
{
- extern int spawn_ksoftirqd(void);
+ initcall_t *call;
- migration_init();
- spawn_ksoftirqd();
- if (!nosoftlockup)
- spawn_softlockup_task();
+ for (call = __initcall_start; call < __early_initcall_end; call++)
+ do_one_initcall(*call);
}
static void run_init_process(char *init_filename)
smp_prepare_cpus(setup_max_cpus);
do_pre_smp_initcalls();
+ start_boot_trace();
smp_init();
sched_init_smp();
* we're essentially up and running. Get rid of the
* initmem segments and start the user-mode stuff..
*/
+ stop_boot_trace();
init_post();
return 0;
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff