+config ARCH
+ string
+ option env="ARCH"
+
+config KERNELVERSION
+ string
+ option env="KERNELVERSION"
+
config DEFCONFIG_LIST
string
depends on !UML
default "/lib/modules/$UNAME_RELEASE/.config"
default "/etc/kernel-config"
default "/boot/config-$UNAME_RELEASE"
+ default "$ARCH_DEFCONFIG"
default "arch/$ARCH/defconfig"
-menu "Code maturity level options"
+menu "General setup"
config EXPERIMENTAL
bool "Prompt for development and/or incomplete code/drivers"
Maximum of each of the number of arguments and environment
variables passed to init from the kernel command line.
-endmenu
-
-menu "General setup"
config LOCALVERSION
string "Local version - append to kernel release"
section 6.4 of the Linux Programmer's Guide, available from
<http://www.tldp.org/guides.html>.
-config IPC_NS
- bool "IPC Namespaces"
- depends on SYSVIPC
- default n
- help
- Support ipc namespaces. This allows containers, i.e. virtual
- environments, to use ipc namespaces to provide different ipc
- objects for different servers. If unsure, say N.
-
config SYSVIPC_SYSCTL
bool
depends on SYSVIPC
queues every message has a priority which decides about succession
of receiving it by a process. If you want to compile and run
programs written e.g. for Solaris with use of its POSIX message
- queues (functions mq_*) say Y here. To use this feature you will
- also need mqueue library, available from
- <http://www.mat.uni.torun.pl/~wrona/posix_ipc/>
+ queues (functions mq_*) say Y here.
POSIX message queues are visible as a filesystem called 'mqueue'
and can be mounted somewhere if you want to do filesystem
Say N if unsure.
-config UTS_NS
- bool "UTS Namespaces"
- default n
- help
- Support uts namespaces. This allows containers, i.e.
- vservers, to use uts namespaces to provide different
- uts info for different servers. If unsure, say N.
-
config AUDIT
bool "Auditing support"
depends on NET
config AUDITSYSCALL
bool "Enable system-call auditing support"
- depends on AUDIT && (X86 || PPC || PPC64 || S390 || IA64 || UML || SPARC64)
+ depends on AUDIT && (X86 || PPC || PPC64 || S390 || IA64 || UML || SPARC64|| SUPERH)
default y if SECURITY_SELINUX
help
Enable low-overhead system-call auditing infrastructure that
such as SELinux. To use audit's filesystem watch feature, please
ensure that INOTIFY is configured.
+config AUDIT_TREE
+ def_bool y
+ depends on AUDITSYSCALL && INOTIFY
+
config IKCONFIG
tristate "Kernel .config support"
---help---
config LOG_BUF_SHIFT
int "Kernel log buffer size (16 => 64KB, 17 => 128KB)"
range 12 21
- default 17 if S390 || LOCKDEP
- default 16 if X86_NUMAQ || IA64
- default 15 if SMP
- default 14
+ default 17
help
Select kernel log buffer size as a power of 2.
- Defaults and Examples:
- 17 => 128 KB for S/390
- 16 => 64 KB for x86 NUMAQ or IA-64
- 15 => 32 KB for SMP
- 14 => 16 KB for uniprocessor
+ Examples:
+ 17 => 128 KB
+ 16 => 64 KB
+ 15 => 32 KB
+ 14 => 16 KB
13 => 8 KB
12 => 4 KB
+config CGROUPS
+ bool "Control Group support"
+ help
+ This option will let you use process cgroup subsystems
+ such as Cpusets
+
+ Say N if unsure.
+
+config CGROUP_DEBUG
+ bool "Example debug cgroup subsystem"
+ depends on CGROUPS
+ default n
+ help
+ This option enables a simple cgroup subsystem that
+ exports useful debugging information about the cgroups
+ framework
+
+ Say N if unsure
+
+config CGROUP_NS
+ bool "Namespace cgroup subsystem"
+ depends on CGROUPS
+ help
+ Provides a simple namespace cgroup subsystem to
+ provide hierarchical naming of sets of namespaces,
+ for instance virtual servers and checkpoint/restart
+ jobs.
+
+config CGROUP_DEVICE
+ bool "Device controller for cgroups"
+ depends on CGROUPS && EXPERIMENTAL
+ help
+ Provides a cgroup implementing whitelists for devices which
+ a process in the cgroup can mknod or open.
+
config CPUSETS
bool "Cpuset support"
- depends on SMP
+ depends on SMP && CGROUPS
help
This option will let you create and manage CPUSETs which
allow dynamically partitioning a system into sets of CPUs and
Say N if unsure.
+#
+# Architectures with an unreliable sched_clock() should select this:
+#
+config HAVE_UNSTABLE_SCHED_CLOCK
+ bool
+
+config GROUP_SCHED
+ bool "Group CPU scheduler"
+ depends on EXPERIMENTAL
+ default n
+ help
+ This feature lets CPU scheduler recognize task groups and control CPU
+ bandwidth allocation to such task groups.
+
+config FAIR_GROUP_SCHED
+ bool "Group scheduling for SCHED_OTHER"
+ depends on GROUP_SCHED
+ default GROUP_SCHED
+
+config RT_GROUP_SCHED
+ bool "Group scheduling for SCHED_RR/FIFO"
+ depends on EXPERIMENTAL
+ depends on GROUP_SCHED
+ default n
+ help
+ This feature lets you explicitly allocate real CPU bandwidth
+ to users or control groups (depending on the "Basis for grouping tasks"
+ setting below. If enabled, it will also make it impossible to
+ schedule realtime tasks for non-root users until you allocate
+ realtime bandwidth for them.
+ See Documentation/sched-rt-group.txt for more information.
+
+choice
+ depends on GROUP_SCHED
+ prompt "Basis for grouping tasks"
+ default USER_SCHED
+
+config USER_SCHED
+ bool "user id"
+ help
+ This option will choose userid as the basis for grouping
+ tasks, thus providing equal CPU bandwidth to each user.
+
+config CGROUP_SCHED
+ bool "Control groups"
+ depends on CGROUPS
+ help
+ This option allows you to create arbitrary task groups
+ using the "cgroup" pseudo filesystem and control
+ the cpu bandwidth allocated to each such task group.
+ Refer to Documentation/cgroups.txt for more information
+ on "cgroup" pseudo filesystem.
+
+endchoice
+
+config CGROUP_CPUACCT
+ bool "Simple CPU accounting cgroup subsystem"
+ depends on CGROUPS
+ help
+ Provides a simple Resource Controller for monitoring the
+ total CPU consumed by the tasks in a cgroup
+
+config RESOURCE_COUNTERS
+ bool "Resource counters"
+ help
+ This option enables controller independent resource accounting
+ infrastructure that works with cgroups
+ depends on CGROUPS
+
+config MM_OWNER
+ bool
+
+config CGROUP_MEM_RES_CTLR
+ bool "Memory Resource Controller for Control Groups"
+ depends on CGROUPS && RESOURCE_COUNTERS
+ select MM_OWNER
+ help
+ Provides a memory resource controller that manages both page cache and
+ RSS memory.
+
+ Note that setting this option increases fixed memory overhead
+ associated with each page of memory in the system by 4/8 bytes
+ and also increases cache misses because struct page on many 64bit
+ systems will not fit into a single cache line anymore.
+
+ Only enable when you're ok with these trade offs and really
+ sure you need the memory resource controller.
+
+ This config option also selects MM_OWNER config option, which
+ could in turn add some fork/exit overhead.
+
config SYSFS_DEPRECATED
+ bool
+
+config SYSFS_DEPRECATED_V2
bool "Create deprecated sysfs files"
+ depends on SYSFS
default y
+ select SYSFS_DEPRECATED
help
This option creates deprecated symlinks such as the
"device"-link, the <subsystem>:<name>-link, and the
releases.
If enabled, this option will also move any device structures
- that belong to a class, back into the /sys/class heirachy, in
- order to support older versions of udev.
+ that belong to a class, back into the /sys/class hierarchy, in
+ order to support older versions of udev and some userspace
+ programs.
+
+ If you are using a distro with the most recent userspace
+ packages, it should be safe to say N here.
- If you are using a distro that was released in 2006 or later,
- it should be safe to say N here.
+config PROC_PID_CPUSET
+ bool "Include legacy /proc/<pid>/cpuset file"
+ depends on CPUSETS
+ default y
config RELAY
bool "Kernel->user space relay support (formerly relayfs)"
If unsure, say N.
+config NAMESPACES
+ bool "Namespaces support" if EMBEDDED
+ default !EMBEDDED
+ help
+ Provides the way to make tasks work with different objects using
+ the same id. For example same IPC id may refer to different objects
+ or same user id or pid may refer to different tasks when used in
+ different namespaces.
+
+config UTS_NS
+ bool "UTS namespace"
+ depends on NAMESPACES
+ help
+ In this namespace tasks see different info provided with the
+ uname() system call
+
+config IPC_NS
+ bool "IPC namespace"
+ depends on NAMESPACES && SYSVIPC
+ help
+ In this namespace tasks work with IPC ids which correspond to
+ different IPC objects in different namespaces
+
+config USER_NS
+ bool "User namespace (EXPERIMENTAL)"
+ depends on NAMESPACES && EXPERIMENTAL
+ help
+ This allows containers, i.e. vservers, to use user namespaces
+ to provide different user info for different servers.
+ If unsure, say N.
+
+config PID_NS
+ bool "PID Namespaces (EXPERIMENTAL)"
+ default n
+ depends on NAMESPACES && EXPERIMENTAL
+ help
+ Suport process id namespaces. This allows having multiple
+ process with the same pid as long as they are in different
+ pid namespaces. This is a building block of containers.
+
+ Unless you want to work with an experimental feature
+ say N here.
+
config BLK_DEV_INITRD
bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support"
depends on BROKEN || !FRV
endif
config CC_OPTIMIZE_FOR_SIZE
- bool "Optimize for size (Look out for broken compilers!)"
+ bool "Optimize for size"
default y
- depends on ARM || H8300 || EXPERIMENTAL
help
Enabling this option will pass "-Os" instead of "-O2" to gcc
resulting in a smaller kernel.
- WARNING: some versions of gcc may generate incorrect code with this
- option. If problems are observed, a gcc upgrade may be needed.
-
If unsure, say N.
config SYSCTL
config UID16
bool "Enable 16-bit UID system calls" if EMBEDDED
- depends on ARM || BFIN || CRIS || FRV || H8300 || X86_32 || M68K || (S390 && !64BIT) || SUPERH || SPARC32 || (SPARC64 && SPARC32_COMPAT) || UML || (X86_64 && IA32_EMULATION)
+ depends on ARM || BLACKFIN || CRIS || FRV || H8300 || X86_32 || M68K || (S390 && !64BIT) || SUPERH || SPARC32 || (SPARC64 && COMPAT) || UML || (X86_64 && IA32_EMULATION)
default y
help
This enables the legacy 16-bit UID syscall wrappers.
If unsure say Y here.
+config SYSCTL_SYSCALL_CHECK
+ bool "Sysctl checks" if EMBEDDED
+ depends on SYSCTL_SYSCALL
+ default y
+ ---help---
+ sys_sysctl uses binary paths that have been found challenging
+ to properly maintain and use. This enables checks that help
+ you to keep things correct.
+
+ If unsure say Y here.
+
config KALLSYMS
bool "Load all symbols for debugging/ksymoops" if EMBEDDED
default y
help
Enable support for generating core dumps. Disabling saves about 4k.
+config PCSPKR_PLATFORM
+ bool "Enable PC-Speaker support" if EMBEDDED
+ depends on ALPHA || X86 || MIPS || PPC_PREP || PPC_CHRP || PPC_PSERIES
+ default y
+ help
+ This option allows to disable the internal PC-Speaker
+ support, saving some memory.
+
+config COMPAT_BRK
+ bool "Disable heap randomization"
+ default y
+ help
+ Randomizing heap placement makes heap exploits harder, but it
+ also breaks ancient binaries (including anything libc5 based).
+ This option changes the bootup default to heap randomization
+ disabled, and can be overriden runtime by setting
+ /proc/sys/kernel/randomize_va_space to 2.
+
+ On non-ancient distros (post-2000 ones) N is usually a safe choice.
+
config BASE_FULL
default y
bool "Enable full-sized data structures for core" if EMBEDDED
support for "fast userspace mutexes". The resulting kernel may not
run glibc-based applications correctly.
+config ANON_INODES
+ bool
+
config EPOLL
bool "Enable eventpoll support" if EMBEDDED
default y
+ select ANON_INODES
help
Disabling this option will cause the kernel to be built without
support for epoll family of system calls.
+config SIGNALFD
+ bool "Enable signalfd() system call" if EMBEDDED
+ select ANON_INODES
+ default y
+ help
+ Enable the signalfd() system call that allows to receive signals
+ on a file descriptor.
+
+ If unsure, say Y.
+
+config TIMERFD
+ bool "Enable timerfd() system call" if EMBEDDED
+ select ANON_INODES
+ default y
+ help
+ Enable the timerfd() system call that allows to receive timer
+ events on a file descriptor.
+
+ If unsure, say Y.
+
+config EVENTFD
+ bool "Enable eventfd() system call" if EMBEDDED
+ select ANON_INODES
+ default y
+ help
+ Enable the eventfd() system call that allows to receive both
+ kernel notification (ie. KAIO) or userspace notifications.
+
+ If unsure, say Y.
+
config SHMEM
bool "Use full shmem filesystem" if EMBEDDED
default y
config SLUB_DEBUG
default y
bool "Enable SLUB debugging support" if EMBEDDED
+ depends on SLUB && SYSFS
help
SLUB has extensive debug support features. Disabling these can
result in significant savings in code size. This also disables
choice
prompt "Choose SLAB allocator"
- default SLAB
+ default SLUB
help
This option allows to select a slab allocator.
bool "SLAB"
help
The regular slab allocator that is established and known to work
- well in all environments. It organizes chache hot objects in
+ well in all environments. It organizes cache hot objects in
per cpu and per node queues. SLAB is the default choice for
- slab allocator.
+ a slab allocator.
config SLUB
- depends on EXPERIMENTAL && !ARCH_USES_SLAB_PAGE_STRUCT
bool "SLUB (Unqueued Allocator)"
help
SLUB is a slab allocator that minimizes cache line usage
instead of managing queues of cached objects (SLAB approach).
Per cpu caching is realized using slabs of objects instead
of queues of objects. SLUB can use memory efficiently
- way and has enhanced diagnostics.
+ and has enhanced diagnostics.
config SLOB
-#
-# SLOB cannot support SMP because SLAB_DESTROY_BY_RCU does not work
-# properly.
-#
- depends on EMBEDDED && !SMP && !SPARSEMEM
+ depends on EMBEDDED
bool "SLOB (Simple Allocator)"
help
- SLOB replaces the SLAB allocator with a drastically simpler
- allocator. SLOB is more space efficient that SLAB but does not
- scale well (single lock for all operations) and is more susceptible
- to fragmentation. SLOB it is a great choice to reduce
- memory usage and code size for embedded systems.
+ SLOB replaces the stock allocator with a drastically simpler
+ allocator. SLOB is generally more space efficient but
+ does not perform as well on large systems.
endchoice
+config PROFILING
+ bool "Profiling support (EXPERIMENTAL)"
+ help
+ Say Y here to enable the extended profiling support mechanisms used
+ by profilers such as OProfile.
+
+config MARKERS
+ bool "Activate markers"
+ help
+ Place an empty function call at each marker site. Can be
+ dynamically changed for a probe function.
+
+source "arch/Kconfig"
+
+config PROC_PAGE_MONITOR
+ default y
+ depends on PROC_FS && MMU
+ bool "Enable /proc page monitoring" if EMBEDDED
+ help
+ Various /proc files exist to monitor process memory utilization:
+ /proc/pid/smaps, /proc/pid/clear_refs, /proc/pid/pagemap,
+ /proc/kpagecount, and /proc/kpageflags. Disabling these
+ interfaces will reduce the size of the kernel by approximately 4kb.
+
endmenu # General setup
+config SLABINFO
+ bool
+ depends on PROC_FS
+ depends on SLAB || SLUB_DEBUG
+ default y
+
config RT_MUTEXES
boolean
select PLIST
default 0 if BASE_FULL
default 1 if !BASE_FULL
-menu "Loadable module support"
-
-config MODULES
+menuconfig MODULES
bool "Enable loadable module support"
help
Kernel modules are small pieces of compiled code which can
If unsure, say Y.
+config MODULE_FORCE_LOAD
+ bool "Forced module loading"
+ depends on MODULES
+ default n
+ help
+ Allow loading of modules without version information (ie. modprobe
+ --force). Forced module loading sets the 'F' (forced) taint flag and
+ is usually a really bad idea.
+
config MODULE_UNLOAD
bool "Module unloading"
depends on MODULES
help
Without this option you will not be able to unload any
modules (note that some modules may not be unloadable
- anyway), which makes your kernel slightly smaller and
- simpler. If unsure, say Y.
+ anyway), which makes your kernel smaller, faster
+ and simpler. If unsure, say Y.
config MODULE_FORCE_UNLOAD
bool "Forced module unloading"
will be created for all modules. If unsure, say N.
config KMOD
- bool "Automatic kernel module loading"
+ def_bool y
depends on MODULES
help
- Normally when you have selected some parts of the kernel to
- be created as kernel modules, you must load them (using the
- "modprobe" command) before you can use them. If you say Y
- here, some parts of the kernel will be able to load modules
- automatically: when a part of the kernel needs a module, it
- runs modprobe with the appropriate arguments, thereby
- loading the module if it is available. If unsure, say Y.
+ This is being removed soon. These days, CONFIG_MODULES
+ implies CONFIG_KMOD, so use that instead.
config STOP_MACHINE
bool
depends on (SMP && MODULE_UNLOAD) || HOTPLUG_CPU
help
Need stop_machine() primitive.
-endmenu
-menu "Block layer"
source "block/Kconfig"
-endmenu
+
+config PREEMPT_NOTIFIERS
+ bool
+
+config CLASSIC_RCU
+ def_bool !PREEMPT_RCU
+ help
+ This option selects the classic RCU implementation that is
+ designed for best read-side performance on non-realtime
+ systems. Classic RCU is the default. Note that the
+ PREEMPT_RCU symbol is used to select/deselect this option.
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff