/*
* 802.11 device and configuration interface
*
- * Copyright 2006-2009 Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* @basic_rates: basic rates in IEEE 802.11 format
* (or NULL for no change)
* @basic_rates_len: number of basic rates
+ * @ap_isolate: do not forward packets between connected stations
*/
struct bss_parameters {
int use_cts_prot;
int use_short_slot_time;
u8 *basic_rates;
u8 basic_rates_len;
+ int ap_isolate;
};
struct mesh_config {
* @beacon_interval: the beacon interval as from the frame
* @capability: the capability field in host byte order
* @information_elements: the information elements (Note that there
- * is no guarantee that these are well-formed!)
+ * is no guarantee that these are well-formed!); this is a pointer to
+ * either the beacon_ies or proberesp_ies depending on whether Probe
+ * Response frame has been received
* @len_information_elements: total length of the information elements
+ * @beacon_ies: the information elements from the last Beacon frame
+ * @len_beacon_ies: total length of the beacon_ies
+ * @proberesp_ies: the information elements from the last Probe Response frame
+ * @len_proberesp_ies: total length of the proberesp_ies
* @signal: signal strength value (type depends on the wiphy's signal_type)
* @free_priv: function pointer to free private data
* @priv: private area for driver use, has at least wiphy->bss_priv_size bytes
u16 capability;
u8 *information_elements;
size_t len_information_elements;
+ u8 *beacon_ies;
+ size_t len_beacon_ies;
+ u8 *proberesp_ies;
+ size_t len_proberesp_ies;
s32 signal;
* @key_len: length of WEP key for shared key authentication
* @key_idx: index of WEP key for shared key authentication
* @key: WEP key for shared key authentication
+ * @local_state_change: This is a request for a local state only, i.e., no
+ * Authentication frame is to be transmitted and authentication state is
+ * to be changed without having to wait for a response from the peer STA
+ * (AP).
*/
struct cfg80211_auth_request {
struct cfg80211_bss *bss;
enum nl80211_auth_type auth_type;
const u8 *key;
u8 key_len, key_idx;
+ bool local_state_change;
};
/**
* @ie: Extra IEs to add to Deauthentication frame or %NULL
* @ie_len: Length of ie buffer in octets
* @reason_code: The reason code for the deauthentication
+ * @local_state_change: This is a request for a local state only, i.e., no
+ * Deauthentication frame is to be transmitted.
*/
struct cfg80211_deauth_request {
struct cfg80211_bss *bss;
const u8 *ie;
size_t ie_len;
u16 reason_code;
+ bool local_state_change;
};
/**
* @ie: Extra IEs to add to Disassociation frame or %NULL
* @ie_len: Length of ie buffer in octets
* @reason_code: The reason code for the disassociation
+ * @local_state_change: This is a request for a local state only, i.e., no
+ * Disassociation frame is to be transmitted.
*/
struct cfg80211_disassoc_request {
struct cfg80211_bss *bss;
const u8 *ie;
size_t ie_len;
u16 reason_code;
+ bool local_state_change;
};
/**
*
* @set_txq_params: Set TX queue parameters
*
- * @set_channel: Set channel
+ * @set_channel: Set channel for a given wireless interface. Some devices
+ * may support multi-channel operation (by channel hopping) so cfg80211
+ * doesn't verify much. Note, however, that the passed netdev may be
+ * %NULL as well if the user requested changing the channel for the
+ * device itself, or for a monitor interface.
*
* @scan: Request to do a scan. If returning zero, the scan request is given
* the driver, and will be valid until passed to cfg80211_scan_done().
* @cancel_remain_on_channel: Cancel an on-going remain-on-channel operation.
* This allows the operation to be terminated prior to timeout based on
* the duration value.
+ * @action: Transmit an action frame
*
* @testmode_cmd: run a test mode command
*
* RSN IE. It allows for faster roaming between WPA2 BSSIDs.
* @del_pmksa: Delete a cached PMKID.
* @flush_pmksa: Flush all cached PMKIDs.
+ * @set_power_mgmt: Configure WLAN power management. A timeout value of -1
+ * allows the driver to adjust the dynamic ps timeout value.
+ * @set_cqm_rssi_config: Configure connection quality monitor RSSI threshold.
*
*/
struct cfg80211_ops {
int (*set_txq_params)(struct wiphy *wiphy,
struct ieee80211_txq_params *params);
- int (*set_channel)(struct wiphy *wiphy,
+ int (*set_channel)(struct wiphy *wiphy, struct net_device *dev,
struct ieee80211_channel *chan,
enum nl80211_channel_type channel_type);
struct net_device *dev,
u64 cookie);
- /* some temporary stuff to finish wext */
+ int (*action)(struct wiphy *wiphy, struct net_device *dev,
+ struct ieee80211_channel *chan,
+ enum nl80211_channel_type channel_type,
+ const u8 *buf, size_t len, u64 *cookie);
+
int (*set_power_mgmt)(struct wiphy *wiphy, struct net_device *dev,
bool enabled, int timeout);
+
+ int (*set_cqm_rssi_config)(struct wiphy *wiphy,
+ struct net_device *dev,
+ s32 rssi_thold, u32 rssi_hyst);
};
/*
WIPHY_FLAG_4ADDR_STATION = BIT(6),
};
+struct mac_address {
+ u8 addr[ETH_ALEN];
+};
+
/**
* struct wiphy - wireless hardware description
* @idx: the wiphy index assigned to this item
* -1 = fragmentation disabled, only odd values >= 256 used
* @rts_threshold: RTS threshold (dot11RTSThreshold); -1 = RTS/CTS disabled
* @net: the network namespace this wiphy currently lives in
+ * @perm_addr: permanent MAC address of this device
+ * @addr_mask: If the device supports multiple MAC addresses by masking,
+ * set this to a mask with variable bits set to 1, e.g. if the last
+ * four bits are variable then set it to 00:...:00:0f. The actual
+ * variable bits shall be determined by the interfaces added, with
+ * interfaces not matching the mask being rejected to be brought up.
+ * @n_addresses: number of addresses in @addresses.
+ * @addresses: If the device has more than one address, set this pointer
+ * to a list of addresses (6 bytes each). The first one will be used
+ * by default for perm_addr. In this case, the mask should be set to
+ * all-zeroes. In this case it is assumed that the device can handle
+ * the same number of arbitrary MAC addresses.
*/
struct wiphy {
/* assign these fields before you register the wiphy */
- /* permanent MAC address */
+ /* permanent MAC address(es) */
u8 perm_addr[ETH_ALEN];
+ u8 addr_mask[ETH_ALEN];
+
+ u16 n_addresses;
+ struct mac_address *addresses;
/* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */
u16 interface_modes;
* @list: (private) Used to collect the interfaces
* @netdev: (private) Used to reference back to the netdev
* @current_bss: (private) Used by the internal configuration code
+ * @channel: (private) Used by the internal configuration code to track
+ * user-set AP, monitor and WDS channels for wireless extensions
* @bssid: (private) Used by the internal configuration code
* @ssid: (private) Used by the internal configuration code
* @ssid_len: (private) Used by the internal configuration code
* set by driver (if supported) on add_interface BEFORE registering the
* netdev and may otherwise be used by driver read-only, will be update
* by cfg80211 on change_interface
+ * @action_registrations: list of registrations for action frames
+ * @action_registrations_lock: lock for the list
*/
struct wireless_dev {
struct wiphy *wiphy;
struct list_head list;
struct net_device *netdev;
+ struct list_head action_registrations;
+ spinlock_t action_registrations_lock;
+
struct mutex mtx;
struct work_struct cleanup_work;
struct cfg80211_internal_bss *authtry_bsses[MAX_AUTH_BSSES];
struct cfg80211_internal_bss *auth_bsses[MAX_AUTH_BSSES];
struct cfg80211_internal_bss *current_bss; /* associated / joined */
+ struct ieee80211_channel *channel;
+
+ bool ps;
+ int ps_timeout;
#ifdef CONFIG_CFG80211_WEXT
/* wext data */
u8 bssid[ETH_ALEN], prev_bssid[ETH_ALEN];
u8 ssid[IEEE80211_MAX_SSID_LEN];
s8 default_key, default_mgmt_key;
- bool ps, prev_bssid_valid;
- int ps_timeout;
+ bool prev_bssid_valid;
} wext;
#endif
};
* Documentation in Documentation/networking/radiotap-headers.txt
*/
+struct radiotap_align_size {
+ uint8_t align:4, size:4;
+};
+
+struct ieee80211_radiotap_namespace {
+ const struct radiotap_align_size *align_size;
+ int n_bits;
+ uint32_t oui;
+ uint8_t subns;
+};
+
+struct ieee80211_radiotap_vendor_namespaces {
+ const struct ieee80211_radiotap_namespace *ns;
+ int n_ns;
+};
+
/**
* struct ieee80211_radiotap_iterator - tracks walk thru present radiotap args
- * @rtheader: pointer to the radiotap header we are walking through
- * @max_length: length of radiotap header in cpu byte ordering
- * @this_arg_index: IEEE80211_RADIOTAP_... index of current arg
- * @this_arg: pointer to current radiotap arg
- * @arg_index: internal next argument index
- * @arg: internal next argument pointer
- * @next_bitmap: internal pointer to next present u32
- * @bitmap_shifter: internal shifter for curr u32 bitmap, b0 set == arg present
+ * @this_arg_index: index of current arg, valid after each successful call
+ * to ieee80211_radiotap_iterator_next()
+ * @this_arg: pointer to current radiotap arg; it is valid after each
+ * call to ieee80211_radiotap_iterator_next() but also after
+ * ieee80211_radiotap_iterator_init() where it will point to
+ * the beginning of the actual data portion
+ * @this_arg_size: length of the current arg, for convenience
+ * @current_namespace: pointer to the current namespace definition
+ * (or internally %NULL if the current namespace is unknown)
+ * @is_radiotap_ns: indicates whether the current namespace is the default
+ * radiotap namespace or not
+ *
+ * @overrides: override standard radiotap fields
+ * @n_overrides: number of overrides
+ *
+ * @_rtheader: pointer to the radiotap header we are walking through
+ * @_max_length: length of radiotap header in cpu byte ordering
+ * @_arg_index: next argument index
+ * @_arg: next argument pointer
+ * @_next_bitmap: internal pointer to next present u32
+ * @_bitmap_shifter: internal shifter for curr u32 bitmap, b0 set == arg present
+ * @_vns: vendor namespace definitions
+ * @_next_ns_data: beginning of the next namespace's data
+ * @_reset_on_ext: internal; reset the arg index to 0 when going to the
+ * next bitmap word
+ *
+ * Describes the radiotap parser state. Fields prefixed with an underscore
+ * must not be used by users of the parser, only by the parser internally.
*/
struct ieee80211_radiotap_iterator {
- struct ieee80211_radiotap_header *rtheader;
- int max_length;
+ struct ieee80211_radiotap_header *_rtheader;
+ const struct ieee80211_radiotap_vendor_namespaces *_vns;
+ const struct ieee80211_radiotap_namespace *current_namespace;
+
+ unsigned char *_arg, *_next_ns_data;
+ __le32 *_next_bitmap;
+
+ unsigned char *this_arg;
int this_arg_index;
- u8 *this_arg;
+ int this_arg_size;
+
+ int is_radiotap_ns;
- int arg_index;
- u8 *arg;
- __le32 *next_bitmap;
- u32 bitmap_shifter;
+ int _max_length;
+ int _arg_index;
+ uint32_t _bitmap_shifter;
+ int _reset_on_ext;
};
extern int ieee80211_radiotap_iterator_init(
- struct ieee80211_radiotap_iterator *iterator,
- struct ieee80211_radiotap_header *radiotap_header,
- int max_length);
+ struct ieee80211_radiotap_iterator *iterator,
+ struct ieee80211_radiotap_header *radiotap_header,
+ int max_length, const struct ieee80211_radiotap_vendor_namespaces *vns);
extern int ieee80211_radiotap_iterator_next(
- struct ieee80211_radiotap_iterator *iterator);
+ struct ieee80211_radiotap_iterator *iterator);
+
extern const unsigned char rfc1042_header[6];
extern const unsigned char bridge_tunnel_header[6];
*/
unsigned int cfg80211_classify8021d(struct sk_buff *skb);
+/**
+ * cfg80211_find_ie - find information element in data
+ *
+ * @eid: element ID
+ * @ies: data consisting of IEs
+ * @len: length of data
+ *
+ * This function will return %NULL if the element ID could
+ * not be found or if the element is invalid (claims to be
+ * longer than the given data), or a pointer to the first byte
+ * of the requested element, that is the byte containing the
+ * element ID. There are no checks on the element length
+ * other than having to fit into the given data.
+ */
+const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len);
+
/*
* Regulatory helper functions for wiphys
*/
void cfg80211_new_sta(struct net_device *dev, const u8 *mac_addr,
struct station_info *sinfo, gfp_t gfp);
+/**
+ * cfg80211_rx_action - notification of received, unprocessed Action frame
+ * @dev: network device
+ * @freq: Frequency on which the frame was received in MHz
+ * @buf: Action frame (header + body)
+ * @len: length of the frame data
+ * @gfp: context flags
+ * Returns %true if a user space application is responsible for rejecting the
+ * unrecognized Action frame; %false if no such application is registered
+ * (i.e., the driver is responsible for rejecting the unrecognized Action
+ * frame)
+ *
+ * This function is called whenever an Action frame is received for a station
+ * mode interface, but is not processed in kernel.
+ */
+bool cfg80211_rx_action(struct net_device *dev, int freq, const u8 *buf,
+ size_t len, gfp_t gfp);
+
+/**
+ * cfg80211_action_tx_status - notification of TX status for Action frame
+ * @dev: network device
+ * @cookie: Cookie returned by cfg80211_ops::action()
+ * @buf: Action frame (header + body)
+ * @len: length of the frame data
+ * @ack: Whether frame was acknowledged
+ * @gfp: context flags
+ *
+ * This function is called whenever an Action frame was requested to be
+ * transmitted with cfg80211_ops::action() to report the TX status of the
+ * transmission attempt.
+ */
+void cfg80211_action_tx_status(struct net_device *dev, u64 cookie,
+ const u8 *buf, size_t len, bool ack, gfp_t gfp);
+
+
+/**
+ * cfg80211_cqm_rssi_notify - connection quality monitoring rssi event
+ * @dev: network device
+ * @rssi_event: the triggered RSSI event
+ * @gfp: context flags
+ *
+ * This function is called when a configured connection quality monitoring
+ * rssi threshold reached event occurs.
+ */
+void cfg80211_cqm_rssi_notify(struct net_device *dev,
+ enum nl80211_cqm_rssi_threshold_event rssi_event,
+ gfp_t gfp);
+
#endif /* __NET_CFG80211_H */
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff