};
/**
+ * enum survey_info_flags - survey information flags
+ *
+ * Used by the driver to indicate which info in &struct survey_info
+ * it has filled in during the get_survey().
+ */
+enum survey_info_flags {
+ SURVEY_INFO_NOISE_DBM = 1<<0,
+};
+
+/**
+ * struct survey_info - channel survey response
+ *
+ * Used by dump_survey() to report back per-channel survey information.
+ *
+ * @channel: the channel this survey record reports, mandatory
+ * @filled: bitflag of flags from &enum survey_info_flags
+ * @noise: channel noise in dBm. This and all following fields are
+ * optional
+ *
+ * This structure can later be expanded with things like
+ * channel duty cycle etc.
+ */
+struct survey_info {
+ struct ieee80211_channel *channel;
+ u32 filled;
+ s8 noise;
+};
+
+/**
* struct beacon_parameters - beacon parameters
*
* Used to configure the beacon for an interface.
u32 dot11MeshHWMPactivePathTimeout;
u16 dot11MeshHWMPpreqMinInterval;
u16 dot11MeshHWMPnetDiameterTraversalTime;
+ u8 dot11MeshHWMPRootMode;
};
/**
u32 fixed; /* fixed bitrate, 0 == not fixed */
u32 maxrate; /* in kbps, 0 == no limit */
};
+/**
+ * struct cfg80211_pmksa - PMK Security Association
+ *
+ * This structure is passed to the set/del_pmksa() method for PMKSA
+ * caching.
+ *
+ * @bssid: The AP's BSSID.
+ * @pmkid: The PMK material itself.
+ */
+struct cfg80211_pmksa {
+ u8 *bssid;
+ u8 *pmkid;
+};
/**
* struct cfg80211_ops - backend description for wireless configuration
* @rfkill_poll: polls the hw rfkill line, use cfg80211 reporting
* functions to adjust rfkill hw state
*
+ * @dump_survey: get site survey information.
+ *
+ * @remain_on_channel: Request the driver to remain awake on the specified
+ * channel for the specified duration to complete an off-channel
+ * operation (e.g., public action frame exchange). When the driver is
+ * ready on the requested channel, it must indicate this with an event
+ * notification by calling cfg80211_ready_on_channel().
+ * @cancel_remain_on_channel: Cancel an on-going remain-on-channel operation.
+ * This allows the operation to be terminated prior to timeout based on
+ * the duration value.
+ *
* @testmode_cmd: run a test mode command
+ *
+ * @set_pmksa: Cache a PMKID for a BSSID. This is mostly useful for fullmac
+ * devices running firmwares capable of generating the (re) association
+ * RSN IE. It allows for faster roaming between WPA2 BSSIDs.
+ * @del_pmksa: Delete a cached PMKID.
+ * @flush_pmksa: Flush all cached PMKIDs.
+ *
*/
struct cfg80211_ops {
int (*suspend)(struct wiphy *wiphy);
const u8 *peer,
const struct cfg80211_bitrate_mask *mask);
+ int (*dump_survey)(struct wiphy *wiphy, struct net_device *netdev,
+ int idx, struct survey_info *info);
+
+ int (*set_pmksa)(struct wiphy *wiphy, struct net_device *netdev,
+ struct cfg80211_pmksa *pmksa);
+ int (*del_pmksa)(struct wiphy *wiphy, struct net_device *netdev,
+ struct cfg80211_pmksa *pmksa);
+ int (*flush_pmksa)(struct wiphy *wiphy, struct net_device *netdev);
+
+ int (*remain_on_channel)(struct wiphy *wiphy,
+ struct net_device *dev,
+ struct ieee80211_channel *chan,
+ enum nl80211_channel_type channel_type,
+ unsigned int duration,
+ u64 *cookie);
+ int (*cancel_remain_on_channel)(struct wiphy *wiphy,
+ struct net_device *dev,
+ u64 cookie);
+
/* some temporary stuff to finish wext */
int (*set_power_mgmt)(struct wiphy *wiphy, struct net_device *dev,
bool enabled, int timeout);
*/
/**
- * struct wiphy - wireless hardware description
- * @idx: the wiphy index assigned to this item
- * @class_dev: the class device representing /sys/class/ieee80211/<wiphy-name>
- * @custom_regulatory: tells us the driver for this device
+ * enum wiphy_flags - wiphy capability flags
+ *
+ * @WIPHY_FLAG_CUSTOM_REGULATORY: tells us the driver for this device
* has its own custom regulatory domain and cannot identify the
* ISO / IEC 3166 alpha2 it belongs to. When this is enabled
* we will disregard the first regulatory hint (when the
* initiator is %REGDOM_SET_BY_CORE).
- * @strict_regulatory: tells us the driver for this device will ignore
- * regulatory domain settings until it gets its own regulatory domain
- * via its regulatory_hint(). After its gets its own regulatory domain
- * it will only allow further regulatory domain settings to further
- * enhance compliance. For example if channel 13 and 14 are disabled
- * by this regulatory domain no user regulatory domain can enable these
- * channels at a later time. This can be used for devices which do not
- * have calibration information gauranteed for frequencies or settings
- * outside of its regulatory domain.
- * @disable_beacon_hints: enable this if your driver needs to ensure that
- * passive scan flags and beaconing flags may not be lifted by cfg80211
- * due to regulatory beacon hints. For more information on beacon
+ * @WIPHY_FLAG_STRICT_REGULATORY: tells us the driver for this device will
+ * ignore regulatory domain settings until it gets its own regulatory
+ * domain via its regulatory_hint(). After its gets its own regulatory
+ * domain it will only allow further regulatory domain settings to
+ * further enhance compliance. For example if channel 13 and 14 are
+ * disabled by this regulatory domain no user regulatory domain can
+ * enable these channels at a later time. This can be used for devices
+ * which do not have calibration information gauranteed for frequencies
+ * or settings outside of its regulatory domain.
+ * @WIPHY_FLAG_DISABLE_BEACON_HINTS: enable this if your driver needs to ensure
+ * that passive scan flags and beaconing flags may not be lifted by
+ * cfg80211 due to regulatory beacon hints. For more information on beacon
* hints read the documenation for regulatory_hint_found_beacon()
+ * @WIPHY_FLAG_NETNS_OK: if not set, do not allow changing the netns of this
+ * wiphy at all
+ * @WIPHY_FLAG_PS_ON_BY_DEFAULT: if set to true, powersave will be enabled
+ * by default -- this flag will be set depending on the kernel's default
+ * on wiphy_new(), but can be changed by the driver if it has a good
+ * reason to override the default
+ * @WIPHY_FLAG_4ADDR_AP: supports 4addr mode even on AP (with a single station
+ * on a VLAN interface)
+ * @WIPHY_FLAG_4ADDR_STATION: supports 4addr mode even as a station
+ */
+enum wiphy_flags {
+ WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0),
+ WIPHY_FLAG_STRICT_REGULATORY = BIT(1),
+ WIPHY_FLAG_DISABLE_BEACON_HINTS = BIT(2),
+ WIPHY_FLAG_NETNS_OK = BIT(3),
+ WIPHY_FLAG_PS_ON_BY_DEFAULT = BIT(4),
+ WIPHY_FLAG_4ADDR_AP = BIT(5),
+ WIPHY_FLAG_4ADDR_STATION = BIT(6),
+};
+
+/**
+ * struct wiphy - wireless hardware description
+ * @idx: the wiphy index assigned to this item
+ * @class_dev: the class device representing /sys/class/ieee80211/<wiphy-name>
* @reg_notifier: the driver's regulatory notification callback
* @regd: the driver's regulatory domain, if one was requested via
* the regulatory_hint() API. This can be used by the driver
* -1 = fragmentation disabled, only odd values >= 256 used
* @rts_threshold: RTS threshold (dot11RTSThreshold); -1 = RTS/CTS disabled
* @net: the network namespace this wiphy currently lives in
- * @netnsok: if set to false, do not allow changing the netns of this
- * wiphy at all
- * @ps_default: default for powersave, will be set depending on the
- * kernel's default on wiphy_new(), but can be changed by the
- * driver if it has a good reason to override the default
*/
struct wiphy {
/* assign these fields before you register the wiphy */
/* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */
u16 interface_modes;
- bool custom_regulatory;
- bool strict_regulatory;
- bool disable_beacon_hints;
-
- bool netnsok;
- bool ps_default;
+ u32 flags;
enum cfg80211_signal_type signal_type;
char fw_version[ETHTOOL_BUSINFO_LEN];
u32 hw_version;
+ u8 max_num_pmkids;
+
/* If multiple wiphys are registered and you're handed e.g.
* a regular netdev with assigned ieee80211_ptr, you won't
* know whether it points to a wiphy your driver has registered
* @ssid_len: (private) Used by the internal configuration code
* @wext: (private) Used by the internal wireless extensions compat code
* @wext_bssid: (private) Used by the internal wireless extensions compat code
+ * @use_4addr: indicates 4addr mode is used on this interface, must be
+ * set by driver (if supported) on add_interface BEFORE registering the
+ * netdev and may otherwise be used by driver read-only, will be update
+ * by cfg80211 on change_interface
*/
struct wireless_dev {
struct wiphy *wiphy;
struct work_struct cleanup_work;
+ bool use_4addr;
+
/* currently used for IBSS and SME - might be rearranged later */
u8 ssid[IEEE80211_MAX_SSID_LEN];
u8 ssid_len;
* @addr: the device MAC address
* @iftype: the virtual interface type
*/
-int ieee80211_data_to_8023(struct sk_buff *skb, u8 *addr,
+int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr,
enum nl80211_iftype iftype);
/**
* @bssid: the network bssid (used only for iftype STATION and ADHOC)
* @qos: build 802.11 QoS data frame
*/
-int ieee80211_data_from_8023(struct sk_buff *skb, u8 *addr,
+int ieee80211_data_from_8023(struct sk_buff *skb, const u8 *addr,
enum nl80211_iftype iftype, u8 *bssid, bool qos);
/**
+ * ieee80211_amsdu_to_8023s - decode an IEEE 802.11n A-MSDU frame
+ *
+ * Decode an IEEE 802.11n A-MSDU frame and convert it to a list of
+ * 802.3 frames. The @list will be empty if the decode fails. The
+ * @skb is consumed after the function returns.
+ *
+ * @skb: The input IEEE 802.11n A-MSDU frame.
+ * @list: The output list of 802.3 frames. It must be allocated and
+ * initialized by by the caller.
+ * @addr: The device MAC address.
+ * @iftype: The device interface type.
+ * @extra_headroom: The hardware extra headroom for SKBs in the @list.
+ */
+void ieee80211_amsdu_to_8023s(struct sk_buff *skb, struct sk_buff_head *list,
+ const u8 *addr, enum nl80211_iftype iftype,
+ const unsigned int extra_headroom);
+
+/**
* cfg80211_classify8021d - determine the 802.1p/1d tag for a data frame
* @skb: the data frame
*/
void cfg80211_send_auth_timeout(struct net_device *dev, const u8 *addr);
/**
+ * __cfg80211_auth_canceled - notify cfg80211 that authentication was canceled
+ * @dev: network device
+ * @addr: The MAC address of the device with which the authentication timed out
+ *
+ * When a pending authentication had no action yet, the driver may decide
+ * to not send a deauth frame, but in that case must calls this function
+ * to tell cfg80211 about this decision. It is only valid to call this
+ * function within the deauth() callback.
+ */
+void __cfg80211_auth_canceled(struct net_device *dev, const u8 *addr);
+
+/**
* cfg80211_send_rx_assoc - notification of processed association
* @dev: network device
* @buf: (re)association response frame (header + body)
void cfg80211_disconnected(struct net_device *dev, u16 reason,
u8 *ie, size_t ie_len, gfp_t gfp);
+/**
+ * cfg80211_ready_on_channel - notification of remain_on_channel start
+ * @dev: network device
+ * @cookie: the request cookie
+ * @chan: The current channel (from remain_on_channel request)
+ * @channel_type: Channel type
+ * @duration: Duration in milliseconds that the driver intents to remain on the
+ * channel
+ * @gfp: allocation flags
+ */
+void cfg80211_ready_on_channel(struct net_device *dev, u64 cookie,
+ struct ieee80211_channel *chan,
+ enum nl80211_channel_type channel_type,
+ unsigned int duration, gfp_t gfp);
+
+/**
+ * cfg80211_remain_on_channel_expired - remain_on_channel duration expired
+ * @dev: network device
+ * @cookie: the request cookie
+ * @chan: The current channel (from remain_on_channel request)
+ * @channel_type: Channel type
+ * @gfp: allocation flags
+ */
+void cfg80211_remain_on_channel_expired(struct net_device *dev,
+ u64 cookie,
+ struct ieee80211_channel *chan,
+ enum nl80211_channel_type channel_type,
+ gfp_t gfp);
+
+
+/**
+ * cfg80211_new_sta - notify userspace about station
+ *
+ * @dev: the netdev
+ * @mac_addr: the station's address
+ * @sinfo: the station information
+ * @gfp: allocation flags
+ */
+void cfg80211_new_sta(struct net_device *dev, const u8 *mac_addr,
+ struct station_info *sinfo, gfp_t gfp);
#endif /* __NET_CFG80211_H */
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff