9p: Make sure we are able to clunk the cached fid on umount

[safe/jmp/linux-2.6] / include / linux / virtio_blk.h

diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h
index d4695a3..e52029e 100644 (file)
--- a/include/linux/virtio_blk.h
+++ b/include/linux/virtio_blk.h
@@ -1,32 +1,62 @@
 #ifndef _LINUX_VIRTIO_BLK_H
 #define _LINUX_VIRTIO_BLK_H
+/* This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers. */
+#include <linux/types.h>
+#include <linux/virtio_ids.h>
 #include <linux/virtio_config.h>
 
-/* The ID for virtio_block */
-#define VIRTIO_ID_BLOCK        2
-
 /* Feature bits */
 #define VIRTIO_BLK_F_BARRIER   0       /* Does host support barriers? */
 #define VIRTIO_BLK_F_SIZE_MAX  1       /* Indicates maximum segment size */
 #define VIRTIO_BLK_F_SEG_MAX   2       /* Indicates maximum # of segments */
 #define VIRTIO_BLK_F_GEOMETRY  4       /* Legacy geometry available  */
+#define VIRTIO_BLK_F_RO                5       /* Disk is read-only */
+#define VIRTIO_BLK_F_BLK_SIZE  6       /* Block size of disk is available*/
+#define VIRTIO_BLK_F_SCSI      7       /* Supports scsi command passthru */
+#define VIRTIO_BLK_F_FLUSH     9       /* Cache flush command support */
+#define VIRTIO_BLK_F_TOPOLOGY  10      /* Topology information is available */
 
-struct virtio_blk_config
-{
+struct virtio_blk_config {
        /* The capacity (in 512-byte sectors). */
-       __le64 capacity;
+       __u64 capacity;
        /* The maximum segment size (if VIRTIO_BLK_F_SIZE_MAX) */
-       __le32 size_max;
+       __u32 size_max;
        /* The maximum number of segments (if VIRTIO_BLK_F_SEG_MAX) */
-       __le32 seg_max;
+       __u32 seg_max;
        /* geometry the device (if VIRTIO_BLK_F_GEOMETRY) */
        struct virtio_blk_geometry {
-               __le16 cylinders;
+               __u16 cylinders;
                __u8 heads;
                __u8 sectors;
        } geometry;
+
+       /* block size of device (if VIRTIO_BLK_F_BLK_SIZE) */
+       __u32 blk_size;
+
+       /* the next 4 entries are guarded by VIRTIO_BLK_F_TOPOLOGY  */
+       /* exponent for physical block per logical block. */
+       __u8 physical_block_exp;
+       /* alignment offset in logical blocks. */
+       __u8 alignment_offset;
+       /* minimum I/O size without performance penalty in logical blocks. */
+       __u16 min_io_size;
+       /* optimal sustained I/O size in logical blocks. */
+       __u32 opt_io_size;
+
 } __attribute__((packed));
 
+/*
+ * Command types
+ *
+ * Usage is a bit tricky as some bits are used as flags and some are not.
+ *
+ * Rules:
+ *   VIRTIO_BLK_T_OUT may be combined with VIRTIO_BLK_T_SCSI_CMD or
+ *   VIRTIO_BLK_T_BARRIER.  VIRTIO_BLK_T_FLUSH is a command of its own
+ *   and may not be combined with any of the other flags.
+ */
+
 /* These two define direction. */
 #define VIRTIO_BLK_T_IN                0
 #define VIRTIO_BLK_T_OUT       1
@@ -34,12 +64,14 @@ struct virtio_blk_config
 /* This bit says it's a scsi command, not an actual read or write. */
 #define VIRTIO_BLK_T_SCSI_CMD  2
 
+/* Cache flush command */
+#define VIRTIO_BLK_T_FLUSH     4
+
 /* Barrier before this op. */
 #define VIRTIO_BLK_T_BARRIER   0x80000000
 
 /* This is the first element of the read scatter-gather list. */
-struct virtio_blk_outhdr
-{
+struct virtio_blk_outhdr {
        /* VIRTIO_BLK_T* */
        __u32 type;
        /* io priority. */
@@ -48,6 +80,13 @@ struct virtio_blk_outhdr
        __u64 sector;
 };
 
+struct virtio_scsi_inhdr {
+       __u32 errors;
+       __u32 data_len;
+       __u32 sense_len;
+       __u32 residual;
+};
+
 /* And this is the final byte of the write scatter-gather list. */
 #define VIRTIO_BLK_S_OK                0
 #define VIRTIO_BLK_S_IOERR     1