/* For SS devices */
/**
- * struct usb_host_ep_comp - Valid for SuperSpeed devices only
+ * struct usb_host_ss_ep_comp - Valid for SuperSpeed devices only
* @desc: endpoint companion descriptor, wMaxPacketSize in native byteorder
* @extra: descriptors following this endpoint companion descriptor
* @extralen: how many bytes of "extra" are valid
*/
-struct usb_host_ep_comp {
- struct usb_ep_comp_descriptor desc;
- unsigned char *extra; /* Extra descriptors */
- int extralen;
+struct usb_host_ss_ep_comp {
+ struct usb_ss_ep_comp_descriptor desc;
+ unsigned char *extra; /* Extra descriptors */
+ int extralen;
};
/**
* @hcpriv: for use by HCD; typically holds hardware dma queue head (QH)
* with one or more transfer descriptors (TDs) per urb
* @ep_dev: ep_device for sysfs info
- * @ep_comp: companion descriptor information for this endpoint
+ * @ss_ep_comp: companion descriptor information for this endpoint
* @extra: descriptors following this endpoint in the configuration
* @extralen: how many bytes of "extra" are valid
* @enabled: URBs may be submitted to this endpoint
struct list_head urb_list;
void *hcpriv;
struct ep_device *ep_dev; /* For sysfs info */
- struct usb_host_ep_comp *ep_comp; /* For SS devices */
+ struct usb_host_ss_ep_comp *ss_ep_comp; /* For SS devices */
unsigned char *extra; /* Extra descriptors */
int extralen;
unsigned needs_altsetting0:1; /* switch to altsetting 0 is pending */
unsigned needs_binding:1; /* needs delayed unbind/rebind */
unsigned reset_running:1;
+ unsigned resetting_device:1; /* true: bandwidth alloc after reset */
struct device dev; /* interface specific device info */
struct device *usb_dev;
- int pm_usage_cnt; /* usage counter for autosuspend */
+ atomic_t pm_usage_cnt; /* usage counter for autosuspend */
struct work_struct reset_ws; /* for resets in atomic context */
};
#define to_usb_interface(d) container_of(d, struct usb_interface, dev)
u8 otg_port; /* 0, or number of OTG/HNP port */
unsigned is_b_host:1; /* true during some HNP roleswitches */
unsigned b_hnp_enable:1; /* OTG: did A-Host enable HNP? */
+ unsigned sg_tablesize; /* 0 or largest number of sg list entries */
int devnum_next; /* Next open device number in
* round-robin allocation */
* @last_busy: time of last use
* @autosuspend_delay: in jiffies
* @connect_time: time device was first connected
- * @auto_pm: autosuspend/resume in progress
* @do_remote_wakeup: remote wakeup should be enabled
* @reset_resume: needs reset instead of resume
* @autosuspend_disabled: autosuspend disabled by the user
- * @autoresume_disabled: autoresume disabled by the user
* @skip_sys_resume: skip the next system resume
* @wusb_dev: if this is a Wireless USB device, link to the WUSB
* specific data for the device.
int autosuspend_delay;
unsigned long connect_time;
- unsigned auto_pm:1;
unsigned do_remote_wakeup:1;
unsigned reset_resume:1;
unsigned autosuspend_disabled:1;
- unsigned autoresume_disabled:1;
unsigned skip_sys_resume:1;
#endif
struct wusb_dev *wusb_dev;
/* USB autosuspend and autoresume */
#ifdef CONFIG_USB_SUSPEND
-extern int usb_autopm_set_interface(struct usb_interface *intf);
extern int usb_autopm_get_interface(struct usb_interface *intf);
extern void usb_autopm_put_interface(struct usb_interface *intf);
extern int usb_autopm_get_interface_async(struct usb_interface *intf);
extern void usb_autopm_put_interface_async(struct usb_interface *intf);
-static inline void usb_autopm_enable(struct usb_interface *intf)
+static inline void usb_autopm_get_interface_no_resume(
+ struct usb_interface *intf)
{
- intf->pm_usage_cnt = 0;
- usb_autopm_set_interface(intf);
+ atomic_inc(&intf->pm_usage_cnt);
}
-
-static inline void usb_autopm_disable(struct usb_interface *intf)
+static inline void usb_autopm_put_interface_no_suspend(
+ struct usb_interface *intf)
{
- intf->pm_usage_cnt = 1;
- usb_autopm_set_interface(intf);
+ atomic_dec(&intf->pm_usage_cnt);
}
static inline void usb_mark_last_busy(struct usb_device *udev)
#else
-static inline int usb_autopm_set_interface(struct usb_interface *intf)
-{ return 0; }
-
static inline int usb_autopm_get_interface(struct usb_interface *intf)
{ return 0; }
-
static inline int usb_autopm_get_interface_async(struct usb_interface *intf)
{ return 0; }
{ }
static inline void usb_autopm_put_interface_async(struct usb_interface *intf)
{ }
-static inline void usb_autopm_enable(struct usb_interface *intf)
+static inline void usb_autopm_get_interface_no_resume(
+ struct usb_interface *intf)
{ }
-static inline void usb_autopm_disable(struct usb_interface *intf)
+static inline void usb_autopm_put_interface_no_suspend(
+ struct usb_interface *intf)
{ }
static inline void usb_mark_last_busy(struct usb_device *udev)
{ }
unsigned ifnum);
extern struct usb_host_interface *usb_altnum_to_altsetting(
const struct usb_interface *intf, unsigned int altnum);
+extern struct usb_host_interface *usb_find_alt_setting(
+ struct usb_host_config *config,
+ unsigned int iface_num,
+ unsigned int alt_num);
/**
/**
* struct usb_class_driver - identifies a USB driver that wants to use the USB major number
* @name: the usb class device name for this driver. Will show up in sysfs.
+ * @devnode: Callback to provide a naming hint for a possible
+ * device node to create.
* @fops: pointer to the struct file_operations of this driver.
* @minor_base: the start of the minor range for this driver.
*
*/
struct usb_class_driver {
char *name;
+ char *(*devnode)(struct device *dev, mode_t *mode);
const struct file_operations *fops;
int minor_base;
};
* @transfer_flags: A variety of flags may be used to affect how URB
* submission, unlinking, or operation are handled. Different
* kinds of URB can use different flags.
- * @transfer_buffer: This identifies the buffer to (or from) which
- * the I/O request will be performed (unless URB_NO_TRANSFER_DMA_MAP
- * is set). This buffer must be suitable for DMA; allocate it with
+ * @transfer_buffer: This identifies the buffer to (or from) which the I/O
+ * request will be performed unless URB_NO_TRANSFER_DMA_MAP is set
+ * (however, do not leave garbage in transfer_buffer even then).
+ * This buffer must be suitable for DMA; allocate it with
* kmalloc() or equivalent. For transfers to "in" endpoints, contents
* of this buffer will be modified. This buffer is used for the data
* stage of control transfers.
* the device driver is saying that it provided this DMA address,
* which the host controller driver should use in preference to the
* transfer_buffer.
+ * @sg: scatter gather buffer list
+ * @num_sgs: number of entries in the sg list
* @transfer_buffer_length: How big is transfer_buffer. The transfer may
* be broken up into chunks according to the current maximum packet
* size for the endpoint, which is a function of the configuration
* @start_frame: Returns the initial frame for isochronous transfers.
* @number_of_packets: Lists the number of ISO transfer buffers.
* @interval: Specifies the polling interval for interrupt or isochronous
- * transfers. The units are frames (milliseconds) for for full and low
+ * transfers. The units are frames (milliseconds) for full and low
* speed devices, and microframes (1/8 millisecond) for highspeed ones.
* @error_count: Returns the number of ISO transfers that reported errors.
* @context: For use in completion functions. This normally points to
* allocate a DMA buffer with usb_buffer_alloc() or call usb_buffer_map().
* When these transfer flags are provided, host controller drivers will
* attempt to use the dma addresses found in the transfer_dma and/or
- * setup_dma fields rather than determining a dma address themselves. (Note
- * that transfer_buffer and setup_packet must still be set because not all
- * host controllers use DMA, nor do virtual root hubs).
+ * setup_dma fields rather than determining a dma address themselves.
+ *
+ * Note that transfer_buffer must still be set if the controller
+ * does not support DMA (as indicated by bus.uses_dma) and when talking
+ * to root hub. If you have to trasfer between highmem zone and the device
+ * on such controller, create a bounce buffer or bail out with an error.
+ * If transfer_buffer cannot be set (is in highmem) and the controller is DMA
+ * capable, assign NULL to it, so that usbmon knows not to use the value.
+ * The setup_packet must always be set, so it cannot be located in highmem.
*
* Initialization:
*
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff