struct usb_device;
struct usb_driver;
+struct wusb_dev;
/*-------------------------------------------------------------------------*/
* - configs have one (often) or more interfaces;
* - interfaces have one (usually) or more settings;
* - each interface setting has zero or (usually) more endpoints.
+ * - a SuperSpeed endpoint has a companion descriptor
*
* And there might be other descriptors mixed in with those.
*
struct ep_device;
+/* For SS devices */
+/**
+ * struct usb_host_ss_ep_comp - Valid for SuperSpeed devices only
+ * @desc: endpoint companion descriptor, wMaxPacketSize in native byteorder
+ * @extra: descriptors following this endpoint companion descriptor
+ * @extralen: how many bytes of "extra" are valid
+ */
+struct usb_host_ss_ep_comp {
+ struct usb_ss_ep_comp_descriptor desc;
+ unsigned char *extra; /* Extra descriptors */
+ int extralen;
+};
+
/**
* struct usb_host_endpoint - host-side endpoint descriptor and queue
* @desc: descriptor for this endpoint, wMaxPacketSize in native byteorder
* @hcpriv: for use by HCD; typically holds hardware dma queue head (QH)
* with one or more transfer descriptors (TDs) per urb
* @ep_dev: ep_device for sysfs info
+ * @ss_ep_comp: companion descriptor information for this endpoint
* @extra: descriptors following this endpoint in the configuration
* @extralen: how many bytes of "extra" are valid
+ * @enabled: URBs may be submitted to this endpoint
*
* USB requests are always queued to a given endpoint, identified by a
* descriptor within an active interface in a given USB configuration.
struct list_head urb_list;
void *hcpriv;
struct ep_device *ep_dev; /* For sysfs info */
+ struct usb_host_ss_ep_comp *ss_ep_comp; /* For SS devices */
unsigned char *extra; /* Extra descriptors */
int extralen;
+ int enabled;
};
/* host-side wrapper for one interface setting's parsed descriptors */
* @altsetting: array of interface structures, one for each alternate
* setting that may be selected. Each one includes a set of
* endpoint configurations. They will be in no particular order.
- * @num_altsetting: number of altsettings defined.
* @cur_altsetting: the current altsetting.
- * @driver: the USB driver that is bound to this interface.
+ * @num_altsetting: number of altsettings defined.
+ * @intf_assoc: interface association descriptor
* @minor: the minor number assigned to this interface, if this
* interface is bound to a driver that uses the USB major number.
* If this interface does not use the USB major, this field should
* number from the USB core by calling usb_register_dev().
* @condition: binding state of the interface: not bound, binding
* (in probe()), bound to a driver, or unbinding (in disconnect())
- * @is_active: flag set when the interface is bound and not suspended.
+ * @sysfs_files_created: sysfs attributes exist
+ * @ep_devs_created: endpoint child pseudo-devices exist
+ * @unregistering: flag set when the interface is being unregistered
* @needs_remote_wakeup: flag set when the driver requires remote-wakeup
* capability during autosuspend.
+ * @needs_altsetting0: flag set when a set-interface request for altsetting 0
+ * has been deferred.
+ * @needs_binding: flag set when the driver should be re-probed or unbound
+ * following a reset or suspend operation it doesn't support.
* @dev: driver model's view of this device
* @usb_dev: if an interface is bound to the USB major, this will point
* to the sysfs representation for that device.
- * @pm_usage_cnt: PM usage counter for this interface; autosuspend is not
- * allowed unless the counter is 0.
+ * @pm_usage_cnt: PM usage counter for this interface
+ * @reset_ws: Used for scheduling resets from atomic context.
+ * @reset_running: set to 1 if the interface is currently running a
+ * queued reset so that usb_cancel_queued_reset() doesn't try to
+ * remove from the workqueue when running inside the worker
+ * thread. See __usb_queue_reset_device().
*
* USB device drivers attach to interfaces on a physical device. Each
* interface encapsulates a single high level function, such as feeding
* active alternate setting */
unsigned num_altsetting; /* number of alternate settings */
+ /* If there is an interface association descriptor then it will list
+ * the associated interfaces */
+ struct usb_interface_assoc_descriptor *intf_assoc;
+
int minor; /* minor number this interface is
* bound to */
enum usb_interface_condition condition; /* state of binding */
- unsigned is_active:1; /* the interface is not suspended */
+ unsigned sysfs_files_created:1; /* the sysfs attributes exist */
+ unsigned ep_devs_created:1; /* endpoint "devices" exist */
+ unsigned unregistering:1; /* unregistration is in progress */
unsigned needs_remote_wakeup:1; /* driver requires remote wakeup */
+ unsigned needs_altsetting0:1; /* switch to altsetting 0 is pending */
+ unsigned needs_binding:1; /* needs delayed unbind/rebind */
+ unsigned reset_running:1;
+ unsigned resetting_device:1; /* true: bandwidth alloc after reset */
struct device dev; /* interface specific device info */
- struct device *usb_dev; /* pointer to the usb class's device, if any */
- int pm_usage_cnt; /* usage counter for autosuspend */
+ struct device *usb_dev;
+ atomic_t pm_usage_cnt; /* usage counter for autosuspend */
+ struct work_struct reset_ws; /* for resets in atomic context */
};
#define to_usb_interface(d) container_of(d, struct usb_interface, dev)
#define interface_to_usbdev(intf) \
container_of(intf->dev.parent, struct usb_device, dev)
-static inline void *usb_get_intfdata (struct usb_interface *intf)
+static inline void *usb_get_intfdata(struct usb_interface *intf)
{
- return dev_get_drvdata (&intf->dev);
+ return dev_get_drvdata(&intf->dev);
}
-static inline void usb_set_intfdata (struct usb_interface *intf, void *data)
+static inline void usb_set_intfdata(struct usb_interface *intf, void *data)
{
dev_set_drvdata(&intf->dev, data);
}
/* this maximum is arbitrary */
#define USB_MAXINTERFACES 32
+#define USB_MAXIADS USB_MAXINTERFACES/2
/**
* struct usb_interface_cache - long-term representation of a device interface
* @desc: the device's configuration descriptor.
* @string: pointer to the cached version of the iConfiguration string, if
* present for this configuration.
+ * @intf_assoc: list of any interface association descriptors in this config
* @interface: array of pointers to usb_interface structures, one for each
* interface in the configuration. The number of interfaces is stored
* in desc.bNumInterfaces. These pointers are valid only while the
struct usb_config_descriptor desc;
char *string; /* iConfiguration string, if present */
+
+ /* List of any Interface Association Descriptors in this
+ * configuration. */
+ struct usb_interface_assoc_descriptor *intf_assoc[USB_MAXIADS];
+
/* the interfaces associated with this configuration,
* stored in no particular order */
struct usb_interface *interface[USB_MAXINTERFACES];
int __usb_get_extra_descriptor(char *buffer, unsigned size,
unsigned char type, void **ptr);
-#define usb_get_extra_descriptor(ifpoint,type,ptr)\
- __usb_get_extra_descriptor((ifpoint)->extra,(ifpoint)->extralen,\
- type,(void**)ptr)
+#define usb_get_extra_descriptor(ifpoint, type, ptr) \
+ __usb_get_extra_descriptor((ifpoint)->extra, \
+ (ifpoint)->extralen, \
+ type, (void **)ptr)
/* ----------------------------------------------------------------------- */
struct usb_bus {
struct device *controller; /* host/master side hardware */
int busnum; /* Bus number (in order of reg) */
- char *bus_name; /* stable id (PCI slot_name etc) */
+ const char *bus_name; /* stable id (PCI slot_name etc) */
u8 uses_dma; /* Does the host controller use DMA? */
u8 otg_port; /* 0, or number of OTG/HNP port */
unsigned is_b_host:1; /* true during some HNP roleswitches */
unsigned b_hnp_enable:1; /* OTG: did A-Host enable HNP? */
+ unsigned sg_tablesize; /* 0 or largest number of sg list entries */
int devnum_next; /* Next open device number in
* round-robin allocation */
struct usb_devmap devmap; /* device address allocation map */
struct usb_device *root_hub; /* Root hub */
+ struct usb_bus *hs_companion; /* Companion EHCI bus, if any */
struct list_head bus_list; /* list of busses */
int bandwidth_allocated; /* on this bus: how much of the time
#ifdef CONFIG_USB_DEVICEFS
struct dentry *usbfs_dentry; /* usbfs dentry entry for the bus */
#endif
- struct class_device *class_dev; /* class device for this bus */
-#if defined(CONFIG_USB_MON)
+#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
struct mon_bus *mon_bus; /* non-null when associated */
int monitored; /* non-zero when monitored */
#endif
struct usb_tt;
-/*
+/**
* struct usb_device - kernel's representation of a USB device
- *
- * FIXME: Write the kerneldoc!
- *
+ * @devnum: device number; address on a USB bus
+ * @devpath: device ID string for use in messages (e.g., /port/...)
+ * @route: tree topology hex string for use with xHCI
+ * @state: device state: configured, not attached, etc.
+ * @speed: device speed: high/full/low (or error)
+ * @tt: Transaction Translator info; used with low/full speed dev, highspeed hub
+ * @ttport: device port on that tt hub
+ * @toggle: one bit for each endpoint, with ([0] = IN, [1] = OUT) endpoints
+ * @parent: our hub, unless we're the root
+ * @bus: bus we're part of
+ * @ep0: endpoint 0 data (default control pipe)
+ * @dev: generic device interface
+ * @descriptor: USB device descriptor
+ * @config: all of the device's configs
+ * @actconfig: the active configuration
+ * @ep_in: array of IN endpoints
+ * @ep_out: array of OUT endpoints
+ * @rawdescriptors: raw descriptors for each config
+ * @bus_mA: Current available from the bus
+ * @portnum: parent port number (origin 1)
+ * @level: number of USB hub ancestors
+ * @can_submit: URBs may be submitted
+ * @persist_enabled: USB_PERSIST enabled for this device
+ * @have_langid: whether string_langid is valid
+ * @authorized: policy has said we can use it;
+ * (user space) policy determines if we authorize this device to be
+ * used or not. By default, wired USB devices are authorized.
+ * WUSB devices are not, until we authorize them from user space.
+ * FIXME -- complete doc
+ * @authenticated: Crypto authentication passed
+ * @wusb: device is Wireless USB
+ * @string_langid: language ID for strings
+ * @product: iProduct string, if present (static)
+ * @manufacturer: iManufacturer string, if present (static)
+ * @serial: iSerialNumber string, if present (static)
+ * @filelist: usbfs files that are open to this device
+ * @usb_classdev: USB class device that was created for usbfs device
+ * access from userspace
+ * @usbfs_dentry: usbfs dentry entry for the device
+ * @maxchild: number of ports if hub
+ * @children: child devices - USB devices that are attached to this hub
+ * @quirks: quirks of the whole device
+ * @urbnum: number of URBs submitted for the whole device
+ * @active_duration: total time device is not suspended
+ * @last_busy: time of last use
+ * @autosuspend_delay: in jiffies
+ * @connect_time: time device was first connected
+ * @do_remote_wakeup: remote wakeup should be enabled
+ * @reset_resume: needs reset instead of resume
+ * @autosuspend_disabled: autosuspend disabled by the user
+ * @wusb_dev: if this is a Wireless USB device, link to the WUSB
+ * specific data for the device.
+ * @slot_id: Slot ID assigned by xHCI
+ *
+ * Notes:
* Usbcore drivers should not set usbdev->state directly. Instead use
* usb_set_device_state().
*/
struct usb_device {
- int devnum; /* Address on USB bus */
- char devpath [16]; /* Use in messages: /port/port/... */
- enum usb_device_state state; /* configured, not attached, etc */
- enum usb_device_speed speed; /* high/full/low (or error) */
+ int devnum;
+ char devpath [16];
+ u32 route;
+ enum usb_device_state state;
+ enum usb_device_speed speed;
- struct usb_tt *tt; /* low/full speed dev, highspeed hub */
- int ttport; /* device port on that tt hub */
+ struct usb_tt *tt;
+ int ttport;
- unsigned int toggle[2]; /* one bit for each endpoint
- * ([0] = IN, [1] = OUT) */
+ unsigned int toggle[2];
- struct usb_device *parent; /* our hub, unless we're the root */
- struct usb_bus *bus; /* Bus we're part of */
+ struct usb_device *parent;
+ struct usb_bus *bus;
struct usb_host_endpoint ep0;
- struct device dev; /* Generic device interface */
+ struct device dev;
- struct usb_device_descriptor descriptor;/* Descriptor */
- struct usb_host_config *config; /* All of the configs */
+ struct usb_device_descriptor descriptor;
+ struct usb_host_config *config;
- struct usb_host_config *actconfig;/* the active configuration */
+ struct usb_host_config *actconfig;
struct usb_host_endpoint *ep_in[16];
struct usb_host_endpoint *ep_out[16];
- char **rawdescriptors; /* Raw descriptors for each config */
+ char **rawdescriptors;
- unsigned short bus_mA; /* Current available from the bus */
- u8 portnum; /* Parent port number (origin 1) */
- u8 level; /* Number of USB hub ancestors */
+ unsigned short bus_mA;
+ u8 portnum;
+ u8 level;
- unsigned discon_suspended:1; /* Disconnected while suspended */
- unsigned have_langid:1; /* whether string_langid is valid */
- int string_langid; /* language ID for strings */
+ unsigned can_submit:1;
+ unsigned persist_enabled:1;
+ unsigned have_langid:1;
+ unsigned authorized:1;
+ unsigned authenticated:1;
+ unsigned wusb:1;
+ int string_langid;
/* static strings from the device */
- char *product; /* iProduct string, if present */
- char *manufacturer; /* iManufacturer string, if present */
- char *serial; /* iSerialNumber string, if present */
+ char *product;
+ char *manufacturer;
+ char *serial;
struct list_head filelist;
#ifdef CONFIG_USB_DEVICE_CLASS
struct device *usb_classdev;
#endif
#ifdef CONFIG_USB_DEVICEFS
- struct dentry *usbfs_dentry; /* usbfs dentry entry for the device */
+ struct dentry *usbfs_dentry;
#endif
- /*
- * Child devices - these can be either new devices
- * (if this is a hub device), or different instances
- * of this same device.
- *
- * Each instance needs its own set of data structures.
- */
- int maxchild; /* Number of ports if hub */
+ int maxchild;
struct usb_device *children[USB_MAXCHILDREN];
- int pm_usage_cnt; /* usage counter for autosuspend */
- u32 quirks; /* quirks of the whole device */
+ u32 quirks;
+ atomic_t urbnum;
-#ifdef CONFIG_PM
- struct delayed_work autosuspend; /* for delayed autosuspends */
- struct mutex pm_mutex; /* protects PM operations */
+ unsigned long active_duration;
- unsigned long last_busy; /* time of last use */
- int autosuspend_delay; /* in jiffies */
+#ifdef CONFIG_PM
+ unsigned long last_busy;
+ int autosuspend_delay;
+ unsigned long connect_time;
- unsigned auto_pm:1; /* autosuspend/resume in progress */
- unsigned do_remote_wakeup:1; /* remote wakeup should be enabled */
- unsigned reset_resume:1; /* needs reset instead of resume */
- unsigned autosuspend_disabled:1; /* autosuspend and autoresume */
- unsigned autoresume_disabled:1; /* disabled by the user */
+ unsigned do_remote_wakeup:1;
+ unsigned reset_resume:1;
+ unsigned autosuspend_disabled:1;
#endif
+ struct wusb_dev *wusb_dev;
+ int slot_id;
};
#define to_usb_device(d) container_of(d, struct usb_device, dev)
extern void usb_put_dev(struct usb_device *dev);
/* USB device locking */
-#define usb_lock_device(udev) down(&(udev)->dev.sem)
-#define usb_unlock_device(udev) up(&(udev)->dev.sem)
-#define usb_trylock_device(udev) down_trylock(&(udev)->dev.sem)
+#define usb_lock_device(udev) device_lock(&(udev)->dev)
+#define usb_unlock_device(udev) device_unlock(&(udev)->dev)
+#define usb_trylock_device(udev) device_trylock(&(udev)->dev)
extern int usb_lock_device_for_reset(struct usb_device *udev,
const struct usb_interface *iface);
/* USB port reset for device reinitialization */
extern int usb_reset_device(struct usb_device *dev);
-extern int usb_reset_composite_device(struct usb_device *dev,
- struct usb_interface *iface);
+extern void usb_queue_reset_device(struct usb_interface *dev);
extern struct usb_device *usb_find_device(u16 vendor_id, u16 product_id);
/* USB autosuspend and autoresume */
#ifdef CONFIG_USB_SUSPEND
-extern int usb_autopm_set_interface(struct usb_interface *intf);
+extern int usb_enable_autosuspend(struct usb_device *udev);
+extern int usb_disable_autosuspend(struct usb_device *udev);
+
extern int usb_autopm_get_interface(struct usb_interface *intf);
extern void usb_autopm_put_interface(struct usb_interface *intf);
-
-static inline void usb_autopm_enable(struct usb_interface *intf)
-{
- intf->pm_usage_cnt = 0;
- usb_autopm_set_interface(intf);
-}
-
-static inline void usb_autopm_disable(struct usb_interface *intf)
-{
- intf->pm_usage_cnt = 1;
- usb_autopm_set_interface(intf);
-}
+extern int usb_autopm_get_interface_async(struct usb_interface *intf);
+extern void usb_autopm_put_interface_async(struct usb_interface *intf);
+extern void usb_autopm_get_interface_no_resume(struct usb_interface *intf);
+extern void usb_autopm_put_interface_no_suspend(struct usb_interface *intf);
static inline void usb_mark_last_busy(struct usb_device *udev)
{
#else
-static inline int usb_autopm_set_interface(struct usb_interface *intf)
+static inline int usb_enable_autosuspend(struct usb_device *udev)
+{ return 0; }
+static inline int usb_disable_autosuspend(struct usb_device *udev)
{ return 0; }
static inline int usb_autopm_get_interface(struct usb_interface *intf)
{ return 0; }
+static inline int usb_autopm_get_interface_async(struct usb_interface *intf)
+{ return 0; }
static inline void usb_autopm_put_interface(struct usb_interface *intf)
{ }
-static inline void usb_autopm_enable(struct usb_interface *intf)
+static inline void usb_autopm_put_interface_async(struct usb_interface *intf)
{ }
-static inline void usb_autopm_disable(struct usb_interface *intf)
+static inline void usb_autopm_get_interface_no_resume(
+ struct usb_interface *intf)
+{ }
+static inline void usb_autopm_put_interface_no_suspend(
+ struct usb_interface *intf)
{ }
static inline void usb_mark_last_busy(struct usb_device *udev)
{ }
/*-------------------------------------------------------------------------*/
/* for drivers using iso endpoints */
-extern int usb_get_current_frame_number (struct usb_device *usb_dev);
+extern int usb_get_current_frame_number(struct usb_device *usb_dev);
/* used these for multi-interface device registration */
extern int usb_driver_claim_interface(struct usb_driver *driver,
- struct usb_interface *iface, void* priv);
+ struct usb_interface *iface, void *priv);
/**
* usb_interface_claimed - returns true iff an interface is claimed
* may need to explicitly claim that lock.
*
*/
-static inline int usb_interface_claimed(struct usb_interface *iface) {
+static inline int usb_interface_claimed(struct usb_interface *iface)
+{
return (iface->dev.driver != NULL);
}
unsigned ifnum);
extern struct usb_host_interface *usb_altnum_to_altsetting(
const struct usb_interface *intf, unsigned int altnum);
+extern struct usb_host_interface *usb_find_alt_setting(
+ struct usb_host_config *config,
+ unsigned int iface_num,
+ unsigned int alt_num);
/**
* USB 2.0 root hubs (EHCI host controllers) will get one path ID if they are
* high speed, and a different one if they are full or low speed.
*/
-static inline int usb_make_path (struct usb_device *dev, char *buf,
- size_t size)
+static inline int usb_make_path(struct usb_device *dev, char *buf, size_t size)
{
int actual;
- actual = snprintf (buf, size, "usb-%s-%s", dev->bus->bus_name,
- dev->devpath);
+ actual = snprintf(buf, size, "usb-%s-%s", dev->bus->bus_name,
+ dev->devpath);
return (actual >= (int)size) ? -1 : actual;
}
/*-------------------------------------------------------------------------*/
-/**
- * usb_endpoint_dir_in - check if the endpoint has IN direction
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type IN, otherwise it returns false.
- */
-static inline int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd)
-{
- return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN);
-}
-
-/**
- * usb_endpoint_dir_out - check if the endpoint has OUT direction
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type OUT, otherwise it returns false.
- */
-static inline int usb_endpoint_dir_out(const struct usb_endpoint_descriptor *epd)
-{
- return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT);
-}
-
-/**
- * usb_endpoint_xfer_bulk - check if the endpoint has bulk transfer type
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type bulk, otherwise it returns false.
- */
-static inline int usb_endpoint_xfer_bulk(const struct usb_endpoint_descriptor *epd)
-{
- return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
- USB_ENDPOINT_XFER_BULK);
-}
-
-/**
- * usb_endpoint_xfer_control - check if the endpoint has control transfer type
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type control, otherwise it returns false.
- */
-static inline int usb_endpoint_xfer_control(const struct usb_endpoint_descriptor *epd)
-{
- return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
- USB_ENDPOINT_XFER_CONTROL);
-}
-
-/**
- * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type interrupt, otherwise it returns
- * false.
- */
-static inline int usb_endpoint_xfer_int(const struct usb_endpoint_descriptor *epd)
-{
- return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
- USB_ENDPOINT_XFER_INT);
-}
-
-/**
- * usb_endpoint_xfer_isoc - check if the endpoint has isochronous transfer type
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type isochronous, otherwise it returns
- * false.
- */
-static inline int usb_endpoint_xfer_isoc(const struct usb_endpoint_descriptor *epd)
-{
- return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
- USB_ENDPOINT_XFER_ISOC);
-}
-
-/**
- * usb_endpoint_is_bulk_in - check if the endpoint is bulk IN
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has bulk transfer type and IN direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_bulk_in(const struct usb_endpoint_descriptor *epd)
-{
- return (usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd));
-}
-
-/**
- * usb_endpoint_is_bulk_out - check if the endpoint is bulk OUT
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has bulk transfer type and OUT direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_bulk_out(const struct usb_endpoint_descriptor *epd)
-{
- return (usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd));
-}
-
-/**
- * usb_endpoint_is_int_in - check if the endpoint is interrupt IN
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has interrupt transfer type and IN direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_int_in(const struct usb_endpoint_descriptor *epd)
-{
- return (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd));
-}
-
-/**
- * usb_endpoint_is_int_out - check if the endpoint is interrupt OUT
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has interrupt transfer type and OUT direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_int_out(const struct usb_endpoint_descriptor *epd)
-{
- return (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd));
-}
-
-/**
- * usb_endpoint_is_isoc_in - check if the endpoint is isochronous IN
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has isochronous transfer type and IN direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_isoc_in(const struct usb_endpoint_descriptor *epd)
-{
- return (usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd));
-}
-
-/**
- * usb_endpoint_is_isoc_out - check if the endpoint is isochronous OUT
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has isochronous transfer type and OUT direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_isoc_out(const struct usb_endpoint_descriptor *epd)
-{
- return (usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd));
-}
-
-/*-------------------------------------------------------------------------*/
-
#define USB_DEVICE_ID_MATCH_DEVICE \
(USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT)
#define USB_DEVICE_ID_MATCH_DEV_RANGE \
* specific device.
*/
#define USB_DEVICE(vend,prod) \
- .match_flags = USB_DEVICE_ID_MATCH_DEVICE, .idVendor = (vend), \
- .idProduct = (prod)
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE, \
+ .idVendor = (vend), \
+ .idProduct = (prod)
/**
- * USB_DEVICE_VER - macro used to describe a specific usb device with a
- * version range
+ * USB_DEVICE_VER - describe a specific usb device with a version range
* @vend: the 16 bit USB Vendor ID
* @prod: the 16 bit USB Product ID
* @lo: the bcdDevice_lo value
* This macro is used to create a struct usb_device_id that matches a
* specific device, with a version range.
*/
-#define USB_DEVICE_VER(vend,prod,lo,hi) \
+#define USB_DEVICE_VER(vend, prod, lo, hi) \
.match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION, \
- .idVendor = (vend), .idProduct = (prod), \
- .bcdDevice_lo = (lo), .bcdDevice_hi = (hi)
+ .idVendor = (vend), \
+ .idProduct = (prod), \
+ .bcdDevice_lo = (lo), \
+ .bcdDevice_hi = (hi)
/**
- * USB_DEVICE_INTERFACE_PROTOCOL - macro used to describe a usb
- * device with a specific interface protocol
+ * USB_DEVICE_INTERFACE_PROTOCOL - describe a usb device with a specific interface protocol
* @vend: the 16 bit USB Vendor ID
* @prod: the 16 bit USB Product ID
* @pr: bInterfaceProtocol value
* This macro is used to create a struct usb_device_id that matches a
* specific interface protocol of devices.
*/
-#define USB_DEVICE_INTERFACE_PROTOCOL(vend,prod,pr) \
- .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_PROTOCOL, \
+#define USB_DEVICE_INTERFACE_PROTOCOL(vend, prod, pr) \
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
+ USB_DEVICE_ID_MATCH_INT_PROTOCOL, \
.idVendor = (vend), \
.idProduct = (prod), \
.bInterfaceProtocol = (pr)
* This macro is used to create a struct usb_device_id that matches a
* specific class of devices.
*/
-#define USB_DEVICE_INFO(cl,sc,pr) \
- .match_flags = USB_DEVICE_ID_MATCH_DEV_INFO, .bDeviceClass = (cl), \
- .bDeviceSubClass = (sc), .bDeviceProtocol = (pr)
+#define USB_DEVICE_INFO(cl, sc, pr) \
+ .match_flags = USB_DEVICE_ID_MATCH_DEV_INFO, \
+ .bDeviceClass = (cl), \
+ .bDeviceSubClass = (sc), \
+ .bDeviceProtocol = (pr)
/**
- * USB_INTERFACE_INFO - macro used to describe a class of usb interfaces
+ * USB_INTERFACE_INFO - macro used to describe a class of usb interfaces
* @cl: bInterfaceClass value
* @sc: bInterfaceSubClass value
* @pr: bInterfaceProtocol value
* This macro is used to create a struct usb_device_id that matches a
* specific class of interfaces.
*/
-#define USB_INTERFACE_INFO(cl,sc,pr) \
- .match_flags = USB_DEVICE_ID_MATCH_INT_INFO, .bInterfaceClass = (cl), \
- .bInterfaceSubClass = (sc), .bInterfaceProtocol = (pr)
+#define USB_INTERFACE_INFO(cl, sc, pr) \
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO, \
+ .bInterfaceClass = (cl), \
+ .bInterfaceSubClass = (sc), \
+ .bInterfaceProtocol = (pr)
/**
- * USB_DEVICE_AND_INTERFACE_INFO - macro used to describe a specific usb device
- * with a class of usb interfaces
+ * USB_DEVICE_AND_INTERFACE_INFO - describe a specific usb device with a class of usb interfaces
* @vend: the 16 bit USB Vendor ID
* @prod: the 16 bit USB Product ID
* @cl: bInterfaceClass value
* This is especially useful when explicitly matching devices that have
* vendor specific bDeviceClass values, but standards-compliant interfaces.
*/
-#define USB_DEVICE_AND_INTERFACE_INFO(vend,prod,cl,sc,pr) \
+#define USB_DEVICE_AND_INTERFACE_INFO(vend, prod, cl, sc, pr) \
.match_flags = USB_DEVICE_ID_MATCH_INT_INFO \
| USB_DEVICE_ID_MATCH_DEVICE, \
- .idVendor = (vend), .idProduct = (prod), \
+ .idVendor = (vend), \
+ .idProduct = (prod), \
.bInterfaceClass = (cl), \
- .bInterfaceSubClass = (sc), .bInterfaceProtocol = (pr)
+ .bInterfaceSubClass = (sc), \
+ .bInterfaceProtocol = (pr)
/* ----------------------------------------------------------------------- */
* and should normally be the same as the module name.
* @probe: Called to see if the driver is willing to manage a particular
* interface on a device. If it is, probe returns zero and uses
- * dev_set_drvdata() to associate driver-specific data with the
+ * usb_set_intfdata() to associate driver-specific data with the
* interface. It may also use usb_set_interface() to specify the
* appropriate altsetting. If unwilling to manage the interface,
- * return a negative errno value.
+ * return -ENODEV, if genuine IO errors occured, an appropriate
+ * negative errno value.
* @disconnect: Called when the interface is no longer accessible, usually
* because its device has been (or is being) disconnected or the
* driver module is being unloaded.
* do (or don't) show up otherwise in the filesystem.
* @suspend: Called when the device is going to be suspended by the system.
* @resume: Called when the device is being resumed by the system.
- * @pre_reset: Called by usb_reset_composite_device() when the device
+ * @reset_resume: Called when the suspended device has been reset instead
+ * of being resumed.
+ * @pre_reset: Called by usb_reset_device() when the device
* is about to be reset.
- * @post_reset: Called by usb_reset_composite_device() after the device
- * has been reset, or in lieu of @resume following a reset-resume
- * (i.e., the device is reset instead of being resumed, as might
- * happen if power was lost). The second argument tells which is
- * the reason.
+ * @post_reset: Called by usb_reset_device() after the device
+ * has been reset
* @id_table: USB drivers use ID table to support hotplugging.
* Export this with MODULE_DEVICE_TABLE(usb,...). This must be set
* or your driver's probe function will never get called.
* added to this driver by preventing the sysfs file from being created.
* @supports_autosuspend: if set to 0, the USB core will not allow autosuspend
* for interfaces bound to this driver.
+ * @soft_unbind: if set to 1, the USB core will not kill URBs and disable
+ * endpoints before calling the driver's disconnect method.
*
* USB interface drivers must provide a name, probe() and disconnect()
* methods, and an id_table. Other driver fields are optional.
int (*suspend) (struct usb_interface *intf, pm_message_t message);
int (*resume) (struct usb_interface *intf);
+ int (*reset_resume)(struct usb_interface *intf);
- void (*pre_reset) (struct usb_interface *intf);
- void (*post_reset) (struct usb_interface *intf, int reset_resume);
+ int (*pre_reset)(struct usb_interface *intf);
+ int (*post_reset)(struct usb_interface *intf);
const struct usb_device_id *id_table;
struct usbdrv_wrap drvwrap;
unsigned int no_dynamic_id:1;
unsigned int supports_autosuspend:1;
+ unsigned int soft_unbind:1;
};
#define to_usb_driver(d) container_of(d, struct usb_driver, drvwrap.driver)
void (*disconnect) (struct usb_device *udev);
int (*suspend) (struct usb_device *udev, pm_message_t message);
- int (*resume) (struct usb_device *udev);
+ int (*resume) (struct usb_device *udev, pm_message_t message);
struct usbdrv_wrap drvwrap;
unsigned int supports_autosuspend:1;
};
/**
* struct usb_class_driver - identifies a USB driver that wants to use the USB major number
* @name: the usb class device name for this driver. Will show up in sysfs.
+ * @devnode: Callback to provide a naming hint for a possible
+ * device node to create.
* @fops: pointer to the struct file_operations of this driver.
* @minor_base: the start of the minor range for this driver.
*
*/
struct usb_class_driver {
char *name;
+ char *(*devnode)(struct device *dev, mode_t *mode);
const struct file_operations *fops;
int minor_base;
};
/*
* urb->transfer_flags:
+ *
+ * Note: URB_DIR_IN/OUT is automatically set in usb_submit_urb().
*/
#define URB_SHORT_NOT_OK 0x0001 /* report short reads as errors */
#define URB_ISO_ASAP 0x0002 /* iso-only, urb->start_frame
#define URB_ZERO_PACKET 0x0040 /* Finish bulk OUT with short packet */
#define URB_NO_INTERRUPT 0x0080 /* HINT: no non-error interrupt
* needed */
+#define URB_FREE_BUFFER 0x0100 /* Free transfer buffer with the URB */
+
+#define URB_DIR_IN 0x0200 /* Transfer from device to host */
+#define URB_DIR_OUT 0
+#define URB_DIR_MASK URB_DIR_IN
struct usb_iso_packet_descriptor {
unsigned int offset;
struct urb;
+struct usb_anchor {
+ struct list_head urb_list;
+ wait_queue_head_t wait;
+ spinlock_t lock;
+ unsigned int poisoned:1;
+};
+
+static inline void init_usb_anchor(struct usb_anchor *anchor)
+{
+ INIT_LIST_HEAD(&anchor->urb_list);
+ init_waitqueue_head(&anchor->wait);
+ spin_lock_init(&anchor->lock);
+}
+
typedef void (*usb_complete_t)(struct urb *);
/**
* struct urb - USB Request Block
* @urb_list: For use by current owner of the URB.
+ * @anchor_list: membership in the list of an anchor
+ * @anchor: to anchor URBs to a common mooring
+ * @ep: Points to the endpoint's data structure. Will eventually
+ * replace @pipe.
* @pipe: Holds endpoint number, direction, type, and more.
* Create these values with the eight macros available;
* usb_{snd,rcv}TYPEpipe(dev,endpoint), where the TYPE is "ctrl"
* @transfer_flags: A variety of flags may be used to affect how URB
* submission, unlinking, or operation are handled. Different
* kinds of URB can use different flags.
- * @transfer_buffer: This identifies the buffer to (or from) which
- * the I/O request will be performed (unless URB_NO_TRANSFER_DMA_MAP
- * is set). This buffer must be suitable for DMA; allocate it with
+ * @transfer_buffer: This identifies the buffer to (or from) which the I/O
+ * request will be performed unless URB_NO_TRANSFER_DMA_MAP is set
+ * (however, do not leave garbage in transfer_buffer even then).
+ * This buffer must be suitable for DMA; allocate it with
* kmalloc() or equivalent. For transfers to "in" endpoints, contents
* of this buffer will be modified. This buffer is used for the data
* stage of control transfers.
* the device driver is saying that it provided this DMA address,
* which the host controller driver should use in preference to the
* transfer_buffer.
+ * @sg: scatter gather buffer list
+ * @num_sgs: number of entries in the sg list
* @transfer_buffer_length: How big is transfer_buffer. The transfer may
* be broken up into chunks according to the current maximum packet
* size for the endpoint, which is a function of the configuration
* transferred. It will normally be the same as requested, unless
* either an error was reported or a short read was performed.
* The URB_SHORT_NOT_OK transfer flag may be used to make such
- * short reads be reported as errors.
+ * short reads be reported as errors.
* @setup_packet: Only used for control transfers, this points to eight bytes
* of setup data. Control transfers always start by sending this data
* to the device. Then transfer_buffer is read or written, if needed.
* @setup_dma: For control transfers with URB_NO_SETUP_DMA_MAP set, the
* device driver has provided this DMA address for the setup packet.
* The host controller driver should use this in preference to
- * setup_packet.
+ * setup_packet, but the HCD may chose to ignore the address if it must
+ * copy the setup packet into internal structures. Therefore, setup_packet
+ * must always point to a valid buffer.
* @start_frame: Returns the initial frame for isochronous transfers.
* @number_of_packets: Lists the number of ISO transfer buffers.
* @interval: Specifies the polling interval for interrupt or isochronous
- * transfers. The units are frames (milliseconds) for for full and low
- * speed devices, and microframes (1/8 millisecond) for highspeed ones.
+ * transfers. The units are frames (milliseconds) for full and low
+ * speed devices, and microframes (1/8 millisecond) for highspeed
+ * and SuperSpeed devices.
* @error_count: Returns the number of ISO transfers that reported errors.
* @context: For use in completion functions. This normally points to
* request-specific driver context.
* @complete: Completion handler. This URB is passed as the parameter to the
* completion function. The completion function may then do what
* it likes with the URB, including resubmitting or freeing it.
- * @iso_frame_desc: Used to provide arrays of ISO transfer buffers and to
+ * @iso_frame_desc: Used to provide arrays of ISO transfer buffers and to
* collect the transfer status for each buffer.
*
* This structure identifies USB transfer requests. URBs must be allocated by
* allocate a DMA buffer with usb_buffer_alloc() or call usb_buffer_map().
* When these transfer flags are provided, host controller drivers will
* attempt to use the dma addresses found in the transfer_dma and/or
- * setup_dma fields rather than determining a dma address themselves. (Note
- * that transfer_buffer and setup_packet must still be set because not all
- * host controllers use DMA, nor do virtual root hubs).
+ * setup_dma fields rather than determining a dma address themselves.
+ *
+ * Note that transfer_buffer must still be set if the controller
+ * does not support DMA (as indicated by bus.uses_dma) and when talking
+ * to root hub. If you have to trasfer between highmem zone and the device
+ * on such controller, create a bounce buffer or bail out with an error.
+ * If transfer_buffer cannot be set (is in highmem) and the controller is DMA
+ * capable, assign NULL to it, so that usbmon knows not to use the value.
+ * The setup_packet must always be set, so it cannot be located in highmem.
*
* Initialization:
*
* when the urb is owned by the hcd, that is, since the call to
* usb_submit_urb() till the entry into the completion routine.
*/
-struct urb
-{
+struct urb {
/* private: usb core and host controller only fields in the urb */
struct kref kref; /* reference count of the URB */
- spinlock_t lock; /* lock for the URB */
void *hcpriv; /* private data for host controller */
atomic_t use_count; /* concurrent submissions counter */
- u8 reject; /* submissions will fail */
+ atomic_t reject; /* submissions will fail */
+ int unlinked; /* unlink error code */
/* public: documented fields in the urb that can be used by drivers */
struct list_head urb_list; /* list head for use by the urb's
* current owner */
+ struct list_head anchor_list; /* the URB may be anchored */
+ struct usb_anchor *anchor;
struct usb_device *dev; /* (in) pointer to associated device */
+ struct usb_host_endpoint *ep; /* (internal) pointer to endpoint */
unsigned int pipe; /* (in) pipe information */
int status; /* (return) non-ISO status */
unsigned int transfer_flags; /* (in) URB_SHORT_NOT_OK | ...*/
void *transfer_buffer; /* (in) associated data buffer */
dma_addr_t transfer_dma; /* (in) dma addr for transfer_buffer */
- int transfer_buffer_length; /* (in) data buffer length */
- int actual_length; /* (return) actual transfer length */
+ struct usb_sg_request *sg; /* (in) scatter gather buffer list */
+ int num_sgs; /* (in) number of entries in the sg list */
+ u32 transfer_buffer_length; /* (in) data buffer length */
+ u32 actual_length; /* (return) actual transfer length */
unsigned char *setup_packet; /* (in) setup packet (control only) */
dma_addr_t setup_dma; /* (in) dma addr for setup_packet */
int start_frame; /* (modify) start frame (ISO) */
* Initializes a control urb with the proper information needed to submit
* it to a device.
*/
-static inline void usb_fill_control_urb (struct urb *urb,
- struct usb_device *dev,
- unsigned int pipe,
- unsigned char *setup_packet,
- void *transfer_buffer,
- int buffer_length,
- usb_complete_t complete_fn,
- void *context)
+static inline void usb_fill_control_urb(struct urb *urb,
+ struct usb_device *dev,
+ unsigned int pipe,
+ unsigned char *setup_packet,
+ void *transfer_buffer,
+ int buffer_length,
+ usb_complete_t complete_fn,
+ void *context)
{
- spin_lock_init(&urb->lock);
urb->dev = dev;
urb->pipe = pipe;
urb->setup_packet = setup_packet;
* Initializes a bulk urb with the proper information needed to submit it
* to a device.
*/
-static inline void usb_fill_bulk_urb (struct urb *urb,
- struct usb_device *dev,
- unsigned int pipe,
- void *transfer_buffer,
- int buffer_length,
- usb_complete_t complete_fn,
- void *context)
+static inline void usb_fill_bulk_urb(struct urb *urb,
+ struct usb_device *dev,
+ unsigned int pipe,
+ void *transfer_buffer,
+ int buffer_length,
+ usb_complete_t complete_fn,
+ void *context)
{
- spin_lock_init(&urb->lock);
urb->dev = dev;
urb->pipe = pipe;
urb->transfer_buffer = transfer_buffer;
*
* Initializes a interrupt urb with the proper information needed to submit
* it to a device.
- * Note that high speed interrupt endpoints use a logarithmic encoding of
- * the endpoint interval, and express polling intervals in microframes
- * (eight per millisecond) rather than in frames (one per millisecond).
+ *
+ * Note that High Speed and SuperSpeed interrupt endpoints use a logarithmic
+ * encoding of the endpoint interval, and express polling intervals in
+ * microframes (eight per millisecond) rather than in frames (one per
+ * millisecond).
+ *
+ * Wireless USB also uses the logarithmic encoding, but specifies it in units of
+ * 128us instead of 125us. For Wireless USB devices, the interval is passed
+ * through to the host controller, rather than being translated into microframe
+ * units.
*/
-static inline void usb_fill_int_urb (struct urb *urb,
- struct usb_device *dev,
- unsigned int pipe,
- void *transfer_buffer,
- int buffer_length,
- usb_complete_t complete_fn,
- void *context,
- int interval)
+static inline void usb_fill_int_urb(struct urb *urb,
+ struct usb_device *dev,
+ unsigned int pipe,
+ void *transfer_buffer,
+ int buffer_length,
+ usb_complete_t complete_fn,
+ void *context,
+ int interval)
{
- spin_lock_init(&urb->lock);
urb->dev = dev;
urb->pipe = pipe;
urb->transfer_buffer = transfer_buffer;
urb->transfer_buffer_length = buffer_length;
urb->complete = complete_fn;
urb->context = context;
- if (dev->speed == USB_SPEED_HIGH)
+ if (dev->speed == USB_SPEED_HIGH || dev->speed == USB_SPEED_SUPER)
urb->interval = 1 << (interval - 1);
else
urb->interval = interval;
extern int usb_submit_urb(struct urb *urb, gfp_t mem_flags);
extern int usb_unlink_urb(struct urb *urb);
extern void usb_kill_urb(struct urb *urb);
+extern void usb_poison_urb(struct urb *urb);
+extern void usb_unpoison_urb(struct urb *urb);
+extern void usb_kill_anchored_urbs(struct usb_anchor *anchor);
+extern void usb_poison_anchored_urbs(struct usb_anchor *anchor);
+extern void usb_unpoison_anchored_urbs(struct usb_anchor *anchor);
+extern void usb_unlink_anchored_urbs(struct usb_anchor *anchor);
+extern void usb_anchor_urb(struct urb *urb, struct usb_anchor *anchor);
+extern void usb_unanchor_urb(struct urb *urb);
+extern int usb_wait_anchor_empty_timeout(struct usb_anchor *anchor,
+ unsigned int timeout);
+extern struct urb *usb_get_from_anchor(struct usb_anchor *anchor);
+extern void usb_scuttle_anchored_urbs(struct usb_anchor *anchor);
+extern int usb_anchor_empty(struct usb_anchor *anchor);
+
+/**
+ * usb_urb_dir_in - check if an URB describes an IN transfer
+ * @urb: URB to be checked
+ *
+ * Returns 1 if @urb describes an IN transfer (device-to-host),
+ * otherwise 0.
+ */
+static inline int usb_urb_dir_in(struct urb *urb)
+{
+ return (urb->transfer_flags & URB_DIR_MASK) == URB_DIR_IN;
+}
-void *usb_buffer_alloc (struct usb_device *dev, size_t size,
+/**
+ * usb_urb_dir_out - check if an URB describes an OUT transfer
+ * @urb: URB to be checked
+ *
+ * Returns 1 if @urb describes an OUT transfer (host-to-device),
+ * otherwise 0.
+ */
+static inline int usb_urb_dir_out(struct urb *urb)
+{
+ return (urb->transfer_flags & URB_DIR_MASK) == URB_DIR_OUT;
+}
+
+void *usb_buffer_alloc(struct usb_device *dev, size_t size,
gfp_t mem_flags, dma_addr_t *dma);
-void usb_buffer_free (struct usb_device *dev, size_t size,
+void usb_buffer_free(struct usb_device *dev, size_t size,
void *addr, dma_addr_t dma);
#if 0
-struct urb *usb_buffer_map (struct urb *urb);
-void usb_buffer_dmasync (struct urb *urb);
-void usb_buffer_unmap (struct urb *urb);
+struct urb *usb_buffer_map(struct urb *urb);
+void usb_buffer_dmasync(struct urb *urb);
+void usb_buffer_unmap(struct urb *urb);
#endif
struct scatterlist;
-int usb_buffer_map_sg(const struct usb_device *dev, unsigned pipe,
+int usb_buffer_map_sg(const struct usb_device *dev, int is_in,
struct scatterlist *sg, int nents);
#if 0
-void usb_buffer_dmasync_sg(const struct usb_device *dev, unsigned pipe,
+void usb_buffer_dmasync_sg(const struct usb_device *dev, int is_in,
struct scatterlist *sg, int n_hw_ents);
#endif
-void usb_buffer_unmap_sg(const struct usb_device *dev, unsigned pipe,
+void usb_buffer_unmap_sg(const struct usb_device *dev, int is_in,
struct scatterlist *sg, int n_hw_ents);
/*-------------------------------------------------------------------*
extern int usb_clear_halt(struct usb_device *dev, int pipe);
extern int usb_reset_configuration(struct usb_device *dev);
extern int usb_set_interface(struct usb_device *dev, int ifnum, int alternate);
+extern void usb_reset_endpoint(struct usb_device *dev, unsigned int epaddr);
/* this request isn't really synchronous, but it belongs with the others */
extern int usb_driver_set_configuration(struct usb_device *udev, int config);
int status;
size_t bytes;
- /*
- * members below are private: to usbcore,
+ /* private:
+ * members below are private to usbcore,
* and are not provided for driver access!
*/
spinlock_t lock;
struct completion complete;
};
-int usb_sg_init (
+int usb_sg_init(
struct usb_sg_request *io,
struct usb_device *dev,
- unsigned pipe,
+ unsigned pipe,
unsigned period,
struct scatterlist *sg,
int nents,
size_t length,
gfp_t mem_flags
);
-void usb_sg_cancel (struct usb_sg_request *io);
-void usb_sg_wait (struct usb_sg_request *io);
+void usb_sg_cancel(struct usb_sg_request *io);
+void usb_sg_wait(struct usb_sg_request *io);
/* ----------------------------------------------------------------------- */
#define usb_pipecontrol(pipe) (usb_pipetype((pipe)) == PIPE_CONTROL)
#define usb_pipebulk(pipe) (usb_pipetype((pipe)) == PIPE_BULK)
-/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */
-#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1)
-#define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << (ep)))
-#define usb_settoggle(dev, ep, out, bit) \
- ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \
- ((bit) << (ep)))
-
-
static inline unsigned int __create_pipe(struct usb_device *dev,
unsigned int endpoint)
{
/* Create various pipes... */
#define usb_sndctrlpipe(dev,endpoint) \
- ((PIPE_CONTROL << 30) | __create_pipe(dev,endpoint))
+ ((PIPE_CONTROL << 30) | __create_pipe(dev, endpoint))
#define usb_rcvctrlpipe(dev,endpoint) \
- ((PIPE_CONTROL << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN)
+ ((PIPE_CONTROL << 30) | __create_pipe(dev, endpoint) | USB_DIR_IN)
#define usb_sndisocpipe(dev,endpoint) \
- ((PIPE_ISOCHRONOUS << 30) | __create_pipe(dev,endpoint))
+ ((PIPE_ISOCHRONOUS << 30) | __create_pipe(dev, endpoint))
#define usb_rcvisocpipe(dev,endpoint) \
- ((PIPE_ISOCHRONOUS << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN)
+ ((PIPE_ISOCHRONOUS << 30) | __create_pipe(dev, endpoint) | USB_DIR_IN)
#define usb_sndbulkpipe(dev,endpoint) \
- ((PIPE_BULK << 30) | __create_pipe(dev,endpoint))
+ ((PIPE_BULK << 30) | __create_pipe(dev, endpoint))
#define usb_rcvbulkpipe(dev,endpoint) \
- ((PIPE_BULK << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN)
+ ((PIPE_BULK << 30) | __create_pipe(dev, endpoint) | USB_DIR_IN)
#define usb_sndintpipe(dev,endpoint) \
- ((PIPE_INTERRUPT << 30) | __create_pipe(dev,endpoint))
+ ((PIPE_INTERRUPT << 30) | __create_pipe(dev, endpoint))
#define usb_rcvintpipe(dev,endpoint) \
- ((PIPE_INTERRUPT << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN)
+ ((PIPE_INTERRUPT << 30) | __create_pipe(dev, endpoint) | USB_DIR_IN)
/*-------------------------------------------------------------------------*/
extern void usb_unregister_notify(struct notifier_block *nb);
#ifdef DEBUG
-#define dbg(format, arg...) printk(KERN_DEBUG "%s: " format "\n" , \
- __FILE__ , ## arg)
+#define dbg(format, arg...) \
+ printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg)
#else
-#define dbg(format, arg...) do {} while (0)
+#define dbg(format, arg...) \
+do { \
+ if (0) \
+ printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg); \
+} while (0)
#endif
-#define err(format, arg...) printk(KERN_ERR "%s: " format "\n" , \
- __FILE__ , ## arg)
-#define info(format, arg...) printk(KERN_INFO "%s: " format "\n" , \
- __FILE__ , ## arg)
-#define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n" , \
- __FILE__ , ## arg)
+#define err(format, arg...) \
+ printk(KERN_ERR KBUILD_MODNAME ": " format "\n", ##arg)
+/* debugfs stuff */
+extern struct dentry *usb_debug_root;
#endif /* __KERNEL__ */