* (in probe()), bound to a driver, or unbinding (in disconnect())
* @is_active: flag set when the interface is bound and not suspended.
* @sysfs_files_created: sysfs attributes exist
+ * @ep_devs_created: endpoint child pseudo-devices exist
* @unregistering: flag set when the interface is being unregistered
* @needs_remote_wakeup: flag set when the driver requires remote-wakeup
* capability during autosuspend.
enum usb_interface_condition condition; /* state of binding */
unsigned is_active:1; /* the interface is not suspended */
unsigned sysfs_files_created:1; /* the sysfs attributes exist */
+ unsigned ep_devs_created:1; /* endpoint "devices" exist */
unsigned unregistering:1; /* unregistration is in progress */
unsigned needs_remote_wakeup:1; /* driver requires remote wakeup */
unsigned needs_altsetting0:1; /* switch to altsetting 0 is pending */
* @autosuspend_disabled: autosuspend disabled by the user
* @autoresume_disabled: autoresume disabled by the user
* @skip_sys_resume: skip the next system resume
+ * @wusb_dev: if this is a Wireless USB device, link to the WUSB
+ * specific data for the device.
*
* Notes:
* Usbcore drivers should not set usbdev->state directly. Instead use
/*-------------------------------------------------------------------------*/
-/**
- * usb_endpoint_num - get the endpoint's number
- * @epd: endpoint to be checked
- *
- * Returns @epd's number: 0 to 15.
- */
-static inline int usb_endpoint_num(const struct usb_endpoint_descriptor *epd)
-{
- return epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
-}
-
-/**
- * usb_endpoint_type - get the endpoint's transfer type
- * @epd: endpoint to be checked
- *
- * Returns one of USB_ENDPOINT_XFER_{CONTROL, ISOC, BULK, INT} according
- * to @epd's transfer type.
- */
-static inline int usb_endpoint_type(const struct usb_endpoint_descriptor *epd)
-{
- return epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
-}
-
-/**
- * usb_endpoint_dir_in - check if the endpoint has IN direction
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type IN, otherwise it returns false.
- */
-static inline int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd)
-{
- return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN);
-}
-
-/**
- * usb_endpoint_dir_out - check if the endpoint has OUT direction
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type OUT, otherwise it returns false.
- */
-static inline int usb_endpoint_dir_out(
- const struct usb_endpoint_descriptor *epd)
-{
- return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT);
-}
-
-/**
- * usb_endpoint_xfer_bulk - check if the endpoint has bulk transfer type
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type bulk, otherwise it returns false.
- */
-static inline int usb_endpoint_xfer_bulk(
- const struct usb_endpoint_descriptor *epd)
-{
- return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
- USB_ENDPOINT_XFER_BULK);
-}
-
-/**
- * usb_endpoint_xfer_control - check if the endpoint has control transfer type
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type control, otherwise it returns false.
- */
-static inline int usb_endpoint_xfer_control(
- const struct usb_endpoint_descriptor *epd)
-{
- return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
- USB_ENDPOINT_XFER_CONTROL);
-}
-
-/**
- * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type interrupt, otherwise it returns
- * false.
- */
-static inline int usb_endpoint_xfer_int(
- const struct usb_endpoint_descriptor *epd)
-{
- return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
- USB_ENDPOINT_XFER_INT);
-}
-
-/**
- * usb_endpoint_xfer_isoc - check if the endpoint has isochronous transfer type
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type isochronous, otherwise it returns
- * false.
- */
-static inline int usb_endpoint_xfer_isoc(
- const struct usb_endpoint_descriptor *epd)
-{
- return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
- USB_ENDPOINT_XFER_ISOC);
-}
-
-/**
- * usb_endpoint_is_bulk_in - check if the endpoint is bulk IN
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has bulk transfer type and IN direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_bulk_in(
- const struct usb_endpoint_descriptor *epd)
-{
- return (usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd));
-}
-
-/**
- * usb_endpoint_is_bulk_out - check if the endpoint is bulk OUT
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has bulk transfer type and OUT direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_bulk_out(
- const struct usb_endpoint_descriptor *epd)
-{
- return (usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd));
-}
-
-/**
- * usb_endpoint_is_int_in - check if the endpoint is interrupt IN
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has interrupt transfer type and IN direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_int_in(
- const struct usb_endpoint_descriptor *epd)
-{
- return (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd));
-}
-
-/**
- * usb_endpoint_is_int_out - check if the endpoint is interrupt OUT
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has interrupt transfer type and OUT direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_int_out(
- const struct usb_endpoint_descriptor *epd)
-{
- return (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd));
-}
-
-/**
- * usb_endpoint_is_isoc_in - check if the endpoint is isochronous IN
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has isochronous transfer type and IN direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_isoc_in(
- const struct usb_endpoint_descriptor *epd)
-{
- return (usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd));
-}
-
-/**
- * usb_endpoint_is_isoc_out - check if the endpoint is isochronous OUT
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has isochronous transfer type and OUT direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_isoc_out(
- const struct usb_endpoint_descriptor *epd)
-{
- return (usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd));
-}
-
-/*-------------------------------------------------------------------------*/
-
#define USB_DEVICE_ID_MATCH_DEVICE \
(USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT)
#define USB_DEVICE_ID_MATCH_DEV_RANGE \
void (*disconnect) (struct usb_device *udev);
int (*suspend) (struct usb_device *udev, pm_message_t message);
- int (*resume) (struct usb_device *udev);
+ int (*resume) (struct usb_device *udev, pm_message_t message);
struct usbdrv_wrap drvwrap;
unsigned int supports_autosuspend:1;
};
struct kref kref; /* reference count of the URB */
void *hcpriv; /* private data for host controller */
atomic_t use_count; /* concurrent submissions counter */
- u8 reject; /* submissions will fail */
+ atomic_t reject; /* submissions will fail */
int unlinked; /* unlink error code */
/* public: documented fields in the urb that can be used by drivers */
unsigned int transfer_flags; /* (in) URB_SHORT_NOT_OK | ...*/
void *transfer_buffer; /* (in) associated data buffer */
dma_addr_t transfer_dma; /* (in) dma addr for transfer_buffer */
- int transfer_buffer_length; /* (in) data buffer length */
- int actual_length; /* (return) actual transfer length */
+ u32 transfer_buffer_length; /* (in) data buffer length */
+ u32 actual_length; /* (return) actual transfer length */
unsigned char *setup_packet; /* (in) setup packet (control only) */
dma_addr_t setup_dma; /* (in) dma addr for setup_packet */
int start_frame; /* (modify) start frame (ISO) */
extern void usb_unpoison_urb(struct urb *urb);
extern void usb_kill_anchored_urbs(struct usb_anchor *anchor);
extern void usb_poison_anchored_urbs(struct usb_anchor *anchor);
+extern void usb_unpoison_anchored_urbs(struct usb_anchor *anchor);
extern void usb_unlink_anchored_urbs(struct usb_anchor *anchor);
extern void usb_anchor_urb(struct urb *urb, struct usb_anchor *anchor);
extern void usb_unanchor_urb(struct urb *urb);
extern int usb_clear_halt(struct usb_device *dev, int pipe);
extern int usb_reset_configuration(struct usb_device *dev);
extern int usb_set_interface(struct usb_device *dev, int ifnum, int alternate);
+extern void usb_reset_endpoint(struct usb_device *dev, unsigned int epaddr);
/* this request isn't really synchronous, but it belongs with the others */
extern int usb_driver_set_configuration(struct usb_device *udev, int config);
#define usb_pipecontrol(pipe) (usb_pipetype((pipe)) == PIPE_CONTROL)
#define usb_pipebulk(pipe) (usb_pipetype((pipe)) == PIPE_BULK)
-/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */
-#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1)
-#define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << (ep)))
-#define usb_settoggle(dev, ep, out, bit) \
- ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \
- ((bit) << (ep)))
-
-
static inline unsigned int __create_pipe(struct usb_device *dev,
unsigned int endpoint)
{
#define err(format, arg...) printk(KERN_ERR KBUILD_MODNAME ": " \
format "\n" , ## arg)
-#define info(format, arg...) printk(KERN_INFO KBUILD_MODNAME ": " \
- format "\n" , ## arg)
-#define warn(format, arg...) printk(KERN_WARNING KBUILD_MODNAME ": " \
- format "\n" , ## arg)
#endif /* __KERNEL__ */