/*
- * include/linux/tipc.h: Include file for TIPC users
+ * include/linux/tipc.h: Include file for TIPC socket interface
*
- * Copyright (c) 2003-2005, Ericsson Research Canada
+ * Copyright (c) 2003-2006, Ericsson AB
* Copyright (c) 2005, Wind River Systems
- * Copyright (c) 2005-2006, Ericsson AB
* All rights reserved.
*
- * Redistribution and use in source and binary forms, with or without
+ * Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
- * Redistributions of source code must retain the above copyright notice, this
- * list of conditions and the following disclaimer.
- * Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * Neither the names of the copyright holders nor the names of its
- * contributors may be used to endorse or promote products derived from this
- * software without specific prior written permission.
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the names of the copyright holders nor the names of its
+ * contributors may be used to endorse or promote products derived from
+ * this software without specific prior written permission.
*
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#define _LINUX_TIPC_H_
#include <linux/types.h>
-#include <linux/string.h>
-#include <asm/byteorder.h>
/*
* TIPC addressing primitives
unsigned int cluster,
unsigned int node)
{
- return(zone << 24) | (cluster << 12) | node;
+ return (zone << 24) | (cluster << 12) | node;
}
static inline unsigned int tipc_zone(__u32 addr)
{
- return addr >> 24;
+ return addr >> 24;
}
static inline unsigned int tipc_cluster(__u32 addr)
{
- return(addr >> 12) & 0xfff;
+ return (addr >> 12) & 0xfff;
}
static inline unsigned int tipc_node(__u32 addr)
{
- return addr & 0xfff;
+ return addr & 0xfff;
}
/*
* Application-accessible port name types
*/
-#define TIPC_NET_EVENTS 0 /* network event subscription name type */
-#define TIPC_TOP_SRV 1 /* topology service name type */
+#define TIPC_CFG_SRV 0 /* configuration service name type */
+#define TIPC_TOP_SRV 1 /* topology service name type */
#define TIPC_RESERVED_TYPES 64 /* lowest user-publishable name type */
/*
* Publication scopes when binding port names and port name sequences
*/
-#define TIPC_ZONE_SCOPE 1
-#define TIPC_CLUSTER_SCOPE 2
-#define TIPC_NODE_SCOPE 3
+#define TIPC_ZONE_SCOPE 1
+#define TIPC_CLUSTER_SCOPE 2
+#define TIPC_NODE_SCOPE 3
/*
* Limiting values for messages
*/
-#define TIPC_MAX_USER_MSG_SIZE 66000
+#define TIPC_MAX_USER_MSG_SIZE 66000
-/*
+/*
* Message importance levels
*/
-#define TIPC_LOW_IMPORTANCE 0 /* default */
+#define TIPC_LOW_IMPORTANCE 0 /* default */
#define TIPC_MEDIUM_IMPORTANCE 1
#define TIPC_HIGH_IMPORTANCE 2
#define TIPC_CRITICAL_IMPORTANCE 3
#define TIPC_SUB_PORTS 0x01 /* filter for port availability */
#define TIPC_SUB_SERVICE 0x02 /* filter for service availability */
+#define TIPC_SUB_CANCEL 0x04 /* cancel a subscription */
#if 0
/* The following filter options are not currently implemented */
#define TIPC_SUB_NO_BIND_EVTS 0x04 /* filter out "publish" events */
#define TIPC_SUB_SINGLE_EVT 0x10 /* expire after first event */
#endif
-#define TIPC_WAIT_FOREVER ~0 /* timeout for permanent subscription */
+#define TIPC_WAIT_FOREVER ~0 /* timeout for permanent subscription */
struct tipc_subscr {
struct tipc_name_seq seq; /* name sequence of interest */
char usr_handle[8]; /* available for subscriber use */
};
-
-#define TIPC_PUBLISHED 1 /* publication event */
-#define TIPC_WITHDRAWN 2 /* withdraw event */
-#define TIPC_SUBSCR_TIMEOUT 3 /* subscription timeout event */
+#define TIPC_PUBLISHED 1 /* publication event */
+#define TIPC_WITHDRAWN 2 /* withdraw event */
+#define TIPC_SUBSCR_TIMEOUT 3 /* subscription timeout event */
struct tipc_event {
__u32 event; /* event type */
__u32 found_lower; /* matching name seq instances */
__u32 found_upper; /* " " " " */
- struct tipc_portid port; /* associated port */
+ struct tipc_portid port; /* associated port */
struct tipc_subscr s; /* associated subscription */
};
#define SOL_TIPC 271
#endif
-#define TIPC_ADDR_NAMESEQ 1
-#define TIPC_ADDR_MCAST 1
-#define TIPC_ADDR_NAME 2
-#define TIPC_ADDR_ID 3
+#define TIPC_ADDR_NAMESEQ 1
+#define TIPC_ADDR_MCAST 1
+#define TIPC_ADDR_NAME 2
+#define TIPC_ADDR_ID 3
struct sockaddr_tipc {
unsigned short family;
#define TIPC_IMPORTANCE 127 /* Default: TIPC_LOW_IMPORTANCE */
#define TIPC_SRC_DROPPABLE 128 /* Default: 0 (resend congested msg) */
#define TIPC_DEST_DROPPABLE 129 /* Default: based on socket type */
-#define TIPC_CONN_TIMEOUT 130 /* Default: 8000 (ms) */
-
-/*
- * Bearer
- */
-
-/* Identifiers of supported TIPC media types */
-
-#define TIPC_MEDIA_TYPE_ETH 1
-
-/* Maximum sizes of TIPC bearer-related names (including terminating NUL) */
-
-#define TIPC_MAX_MEDIA_NAME 16 /* format = media */
-#define TIPC_MAX_IF_NAME 16 /* format = interface */
-#define TIPC_MAX_BEARER_NAME 32 /* format = media:interface */
-#define TIPC_MAX_LINK_NAME 60 /* format = Z.C.N:interface-Z.C.N:interface */
-
-struct tipc_media_addr {
- __u32 type;
- union {
- __u8 eth_addr[6]; /* Ethernet bearer */
-#if 0
- /* Prototypes for other possible bearer types */
-
- struct {
- __u16 sin_family;
- __u16 sin_port;
- struct {
- __u32 s_addr;
- } sin_addr;
- char pad[4];
- } addr_in; /* IP-based bearer */
- __u16 sock_descr; /* generic socket bearer */
-#endif
- } dev_addr;
-};
-
-
-/* Link priority limits (range from 0 to # priorities - 1) */
-
-#define TIPC_NUM_LINK_PRI 32
-
-/* Link tolerance limits (min, default, max), in ms */
-
-#define TIPC_MIN_LINK_TOL 50
-#define TIPC_DEF_LINK_TOL 1500
-#define TIPC_MAX_LINK_TOL 30000
-
-/* Link window limits (min, default, max), in packets */
-
-#define TIPC_MIN_LINK_WIN 16
-#define TIPC_DEF_LINK_WIN 50
-#define TIPC_MAX_LINK_WIN 150
-
-/*
- * Configuration
- *
- * All configuration management messaging involves sending a request message
- * to the TIPC configuration service on a node, which sends a reply message
- * back. (In the future multi-message replies may be supported.)
- *
- * Both request and reply messages consist of a transport header and payload.
- * The transport header contains info about the desired operation;
- * the payload consists of zero or more type/length/value (TLV) items
- * which specify parameters or results for the operation.
- *
- * For many operations, the request and reply messages have a fixed number
- * of TLVs (usually zero or one); however, some reply messages may return
- * a variable number of TLVs. A failed request is denoted by the presence
- * of an "error string" TLV in the reply message instead of the TLV(s) the
- * reply should contain if the request succeeds.
- */
-
-#define TIPC_CFG_SRV 0 /* configuration service name type */
-
-/*
- * Public commands:
- * May be issued by any process.
- * Accepted by own node, or by remote node only if remote management enabled.
- */
-
-#define TIPC_CMD_NOOP 0x0000 /* tx none, rx none */
-#define TIPC_CMD_GET_NODES 0x0001 /* tx net_addr, rx node_info(s) */
-#define TIPC_CMD_GET_MEDIA_NAMES 0x0002 /* tx none, rx media_name(s) */
-#define TIPC_CMD_GET_BEARER_NAMES 0x0003 /* tx none, rx bearer_name(s) */
-#define TIPC_CMD_GET_LINKS 0x0004 /* tx net_addr, rx link_info(s) */
-#define TIPC_CMD_SHOW_NAME_TABLE 0x0005 /* tx name_tbl_query, rx ultra_string */
-#define TIPC_CMD_SHOW_PORTS 0x0006 /* tx none, rx ultra_string */
-#define TIPC_CMD_SHOW_LINK_STATS 0x000B /* tx link_name, rx ultra_string */
-
-#if 0
-#define TIPC_CMD_SHOW_PORT_STATS 0x0008 /* tx port_ref, rx ultra_string */
-#define TIPC_CMD_RESET_PORT_STATS 0x0009 /* tx port_ref, rx none */
-#define TIPC_CMD_GET_ROUTES 0x000A /* tx ?, rx ? */
-#define TIPC_CMD_GET_LINK_PEER 0x000D /* tx link_name, rx ? */
-#endif
-
-/*
- * Protected commands:
- * May only be issued by "network administration capable" process.
- * Accepted by own node, or by remote node only if remote management enabled
- * and this node is zone manager.
- */
-
-#define TIPC_CMD_GET_REMOTE_MNG 0x4003 /* tx none, rx unsigned */
-#define TIPC_CMD_GET_MAX_PORTS 0x4004 /* tx none, rx unsigned */
-#define TIPC_CMD_GET_MAX_PUBL 0x4005 /* tx none, rx unsigned */
-#define TIPC_CMD_GET_MAX_SUBSCR 0x4006 /* tx none, rx unsigned */
-#define TIPC_CMD_GET_MAX_ZONES 0x4007 /* tx none, rx unsigned */
-#define TIPC_CMD_GET_MAX_CLUSTERS 0x4008 /* tx none, rx unsigned */
-#define TIPC_CMD_GET_MAX_NODES 0x4009 /* tx none, rx unsigned */
-#define TIPC_CMD_GET_MAX_SLAVES 0x400A /* tx none, rx unsigned */
-#define TIPC_CMD_GET_NETID 0x400B /* tx none, rx unsigned */
-
-#define TIPC_CMD_ENABLE_BEARER 0x4101 /* tx bearer_config, rx none */
-#define TIPC_CMD_DISABLE_BEARER 0x4102 /* tx bearer_name, rx none */
-#define TIPC_CMD_SET_LINK_TOL 0x4107 /* tx link_config, rx none */
-#define TIPC_CMD_SET_LINK_PRI 0x4108 /* tx link_config, rx none */
-#define TIPC_CMD_SET_LINK_WINDOW 0x4109 /* tx link_config, rx none */
-#define TIPC_CMD_SET_LOG_SIZE 0x410A /* tx unsigned, rx none */
-#define TIPC_CMD_DUMP_LOG 0x410B /* tx none, rx ultra_string */
-#define TIPC_CMD_RESET_LINK_STATS 0x410C /* tx link_name, rx none */
-
-#if 0
-#define TIPC_CMD_CREATE_LINK 0x4103 /* tx link_create, rx none */
-#define TIPC_CMD_REMOVE_LINK 0x4104 /* tx link_name, rx none */
-#define TIPC_CMD_BLOCK_LINK 0x4105 /* tx link_name, rx none */
-#define TIPC_CMD_UNBLOCK_LINK 0x4106 /* tx link_name, rx none */
-#endif
-
-/*
- * Private commands:
- * May only be issued by "network administration capable" process.
- * Accepted by own node only; cannot be used on a remote node.
- */
-
-#define TIPC_CMD_SET_NODE_ADDR 0x8001 /* tx net_addr, rx none */
-#if 0
-#define TIPC_CMD_SET_ZONE_MASTER 0x8002 /* tx none, rx none */
-#endif
-#define TIPC_CMD_SET_REMOTE_MNG 0x8003 /* tx unsigned, rx none */
-#define TIPC_CMD_SET_MAX_PORTS 0x8004 /* tx unsigned, rx none */
-#define TIPC_CMD_SET_MAX_PUBL 0x8005 /* tx unsigned, rx none */
-#define TIPC_CMD_SET_MAX_SUBSCR 0x8006 /* tx unsigned, rx none */
-#define TIPC_CMD_SET_MAX_ZONES 0x8007 /* tx unsigned, rx none */
-#define TIPC_CMD_SET_MAX_CLUSTERS 0x8008 /* tx unsigned, rx none */
-#define TIPC_CMD_SET_MAX_NODES 0x8009 /* tx unsigned, rx none */
-#define TIPC_CMD_SET_MAX_SLAVES 0x800A /* tx unsigned, rx none */
-#define TIPC_CMD_SET_NETID 0x800B /* tx unsigned, rx none */
-
-/*
- * TLV types defined for TIPC
- */
-
-#define TIPC_TLV_NONE 0 /* no TLV present */
-#define TIPC_TLV_VOID 1 /* empty TLV (0 data bytes)*/
-#define TIPC_TLV_UNSIGNED 2 /* 32-bit integer */
-#define TIPC_TLV_STRING 3 /* char[128] (max) */
-#define TIPC_TLV_LARGE_STRING 4 /* char[2048] (max) */
-#define TIPC_TLV_ULTRA_STRING 5 /* char[32768] (max) */
-
-#define TIPC_TLV_ERROR_STRING 16 /* char[128] containing "error code" */
-#define TIPC_TLV_NET_ADDR 17 /* 32-bit integer denoting <Z.C.N> */
-#define TIPC_TLV_MEDIA_NAME 18 /* char[MAX_MEDIA_NAME] */
-#define TIPC_TLV_BEARER_NAME 19 /* char[MAX_BEARER_NAME] */
-#define TIPC_TLV_LINK_NAME 20 /* char[MAX_LINK_NAME] */
-#define TIPC_TLV_NODE_INFO 21 /* struct tipc_node_info */
-#define TIPC_TLV_LINK_INFO 22 /* struct tipc_link_info */
-#define TIPC_TLV_BEARER_CONFIG 23 /* struct tipc_bearer_config */
-#define TIPC_TLV_LINK_CONFIG 24 /* struct tipc_link_config */
-#define TIPC_TLV_NAME_TBL_QUERY 25 /* struct tipc_name_table_query */
-#define TIPC_TLV_PORT_REF 26 /* 32-bit port reference */
-
-struct tipc_node_info {
- __u32 addr; /* network address of node */
- __u32 up; /* 0=down, 1= up */
-};
-
-struct tipc_link_info {
- __u32 dest; /* network address of peer node */
- __u32 up; /* 0=down, 1=up */
- char str[TIPC_MAX_LINK_NAME]; /* link name */
-};
-
-struct tipc_bearer_config {
- __u32 priority; /* Range [1,31]. Override per link */
- __u32 detect_scope;
- char name[TIPC_MAX_BEARER_NAME];
-};
-
-struct tipc_link_config {
- __u32 value;
- char name[TIPC_MAX_LINK_NAME];
-};
-
-#define TIPC_NTQ_ALLTYPES 0x80000000
-
-struct tipc_name_table_query {
- __u32 depth; /* 1:type, 2:+name info, 3:+port info, 4+:+debug info */
- __u32 type; /* {t,l,u} info ignored if high bit of "depth" is set */
- __u32 lowbound; /* (i.e. displays all entries of name table) */
- __u32 upbound;
-};
-
-/*
- * The error string TLV is a null-terminated string describing the cause
- * of the request failure. To simplify error processing (and to save space)
- * the first character of the string can be a special error code character
- * (lying by the range 0x80 to 0xFF) which represents a pre-defined reason.
- */
-
-#define TIPC_CFG_TLV_ERROR "\x80" /* request contains incorrect TLV(s) */
-#define TIPC_CFG_NOT_NET_ADMIN "\x81" /* must be network administrator */
-#define TIPC_CFG_NOT_ZONE_MSTR "\x82" /* must be zone master */
-#define TIPC_CFG_NO_REMOTE "\x83" /* remote management not enabled */
-#define TIPC_CFG_NOT_SUPPORTED "\x84" /* request is not supported by TIPC */
-#define TIPC_CFG_INVALID_VALUE "\x85" /* request has invalid argument value */
-
-#if 0
-/* prototypes TLV structures for proposed commands */
-struct tipc_link_create {
- __u32 domain;
- struct tipc_media_addr peer_addr;
- char bearer_name[MAX_BEARER_NAME];
-};
-
-struct tipc_route_info {
- __u32 dest;
- __u32 router;
-};
-#endif
-
-/*
- * A TLV consists of a descriptor, followed by the TLV value.
- * TLV descriptor fields are stored in network byte order;
- * TLV values must also be stored in network byte order (where applicable).
- * TLV descriptors must be aligned to addresses which are multiple of 4,
- * so up to 3 bytes of padding may exist at the end of the TLV value area.
- * There must not be any padding between the TLV descriptor and its value.
- */
-
-struct tlv_desc {
- __u16 tlv_len; /* TLV length (descriptor + value) */
- __u16 tlv_type; /* TLV identifier */
-};
-
-#define TLV_ALIGNTO 4
-
-#define TLV_ALIGN(datalen) (((datalen)+(TLV_ALIGNTO-1)) & ~(TLV_ALIGNTO-1))
-#define TLV_LENGTH(datalen) (sizeof(struct tlv_desc) + (datalen))
-#define TLV_SPACE(datalen) (TLV_ALIGN(TLV_LENGTH(datalen)))
-#define TLV_DATA(tlv) ((void *)((char *)(tlv) + TLV_LENGTH(0)))
-
-static inline int TLV_OK(const void *tlv, __u16 space)
-{
- /*
- * Would also like to check that "tlv" is a multiple of 4,
- * but don't know how to do this in a portable way.
- * - Tried doing (!(tlv & (TLV_ALIGNTO-1))), but GCC compiler
- * won't allow binary "&" with a pointer.
- * - Tried casting "tlv" to integer type, but causes warning about size
- * mismatch when pointer is bigger than chosen type (int, long, ...).
- */
-
- return (space >= TLV_SPACE(0)) &&
- (ntohs(((struct tlv_desc *)tlv)->tlv_len) <= space);
-}
-
-static inline int TLV_CHECK(const void *tlv, __u16 space, __u16 exp_type)
-{
- return TLV_OK(tlv, space) &&
- (ntohs(((struct tlv_desc *)tlv)->tlv_type) == exp_type);
-}
-
-static inline int TLV_SET(void *tlv, __u16 type, void *data, __u16 len)
-{
- struct tlv_desc *tlv_ptr;
- int tlv_len;
-
- tlv_len = TLV_LENGTH(len);
- tlv_ptr = (struct tlv_desc *)tlv;
- tlv_ptr->tlv_type = htons(type);
- tlv_ptr->tlv_len = htons(tlv_len);
- if (len && data)
- memcpy(TLV_DATA(tlv_ptr), data, tlv_len);
- return TLV_SPACE(len);
-}
-
-/*
- * A TLV list descriptor simplifies processing of messages
- * containing multiple TLVs.
- */
-
-struct tlv_list_desc {
- struct tlv_desc *tlv_ptr; /* ptr to current TLV */
- __u32 tlv_space; /* # bytes from curr TLV to list end */
-};
-
-static inline void TLV_LIST_INIT(struct tlv_list_desc *list,
- void *data, __u32 space)
-{
- list->tlv_ptr = (struct tlv_desc *)data;
- list->tlv_space = space;
-}
-
-static inline int TLV_LIST_EMPTY(struct tlv_list_desc *list)
-{
- return (list->tlv_space == 0);
-}
-
-static inline int TLV_LIST_CHECK(struct tlv_list_desc *list, __u16 exp_type)
-{
- return TLV_CHECK(list->tlv_ptr, list->tlv_space, exp_type);
-}
-
-static inline void *TLV_LIST_DATA(struct tlv_list_desc *list)
-{
- return TLV_DATA(list->tlv_ptr);
-}
-
-static inline void TLV_LIST_STEP(struct tlv_list_desc *list)
-{
- __u16 tlv_space = TLV_ALIGN(ntohs(list->tlv_ptr->tlv_len));
-
- list->tlv_ptr = (struct tlv_desc *)((char *)list->tlv_ptr + tlv_space);
- list->tlv_space -= tlv_space;
-}
-
-/*
- * Configuration messages exchanged via NETLINK_GENERIC use the following
- * family id, name, version and command.
- */
-#define TIPC_GENL_FAMILY 0x222
-#define TIPC_GENL_NAME "TIPC"
-#define TIPC_GENL_VERSION 0x1
-#define TIPC_GENL_CMD 0x1
-
-/*
- * TIPC specific header used in NETLINK_GENERIC requests.
- */
-struct tipc_genlmsghdr {
- __u32 dest; /* Destination address */
- __u16 cmd; /* Command */
- __u16 reserved; /* Unused */
-};
-
-#define TIPC_GENL_HDRLEN NLMSG_ALIGN(sizeof(struct tipc_genlmsghdr))
-
-/*
- * Configuration messages exchanged via TIPC sockets use the TIPC configuration
- * message header, which is defined below. This structure is analogous
- * to the Netlink message header, but fields are stored in network byte order
- * and no padding is permitted between the header and the message data
- * that follows.
- */
-
-struct tipc_cfg_msg_hdr
-{
- __u32 tcm_len; /* Message length (including header) */
- __u16 tcm_type; /* Command type */
- __u16 tcm_flags; /* Additional flags */
- char tcm_reserved[8]; /* Unused */
-};
-
-#define TCM_F_REQUEST 0x1 /* Flag: Request message */
-#define TCM_F_MORE 0x2 /* Flag: Message to be continued */
-
-#define TCM_ALIGN(datalen) (((datalen)+3) & ~3)
-#define TCM_LENGTH(datalen) (sizeof(struct tipc_cfg_msg_hdr) + datalen)
-#define TCM_SPACE(datalen) (TCM_ALIGN(TCM_LENGTH(datalen)))
-#define TCM_DATA(tcm_hdr) ((void *)((char *)(tcm_hdr) + TCM_LENGTH(0)))
-
-static inline int TCM_SET(void *msg, __u16 cmd, __u16 flags,
- void *data, __u16 data_len)
-{
- struct tipc_cfg_msg_hdr *tcm_hdr;
- int msg_len;
-
- msg_len = TCM_LENGTH(data_len);
- tcm_hdr = (struct tipc_cfg_msg_hdr *)msg;
- tcm_hdr->tcm_len = htonl(msg_len);
- tcm_hdr->tcm_type = htons(cmd);
- tcm_hdr->tcm_flags = htons(flags);
- if (data_len && data)
- memcpy(TCM_DATA(msg), data, data_len);
- return TCM_SPACE(data_len);
-}
+#define TIPC_CONN_TIMEOUT 130 /* Default: 8000 (ms) */
+#define TIPC_NODE_RECVQ_DEPTH 131 /* Default: none (read only) */
+#define TIPC_SOCK_RECVQ_DEPTH 132 /* Default: none (read only) */
#endif
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff