#ifndef LINUX_SERIAL_CORE_H
#define LINUX_SERIAL_CORE_H
+#include <linux/serial.h>
+
/*
* The type definitions. These are from Ted Ts'o's serial.h
*/
#define PORT_NS16550A 14
#define PORT_XSCALE 15
#define PORT_RM9000 16 /* PMC-Sierra RM9xxx internal UART */
-#define PORT_MAX_8250 16 /* max port ID */
+#define PORT_OCTEON 17 /* Cavium OCTEON internal UART */
+#define PORT_AR7 18 /* Texas Instruments AR7 internal UART */
+#define PORT_MAX_8250 18 /* max port ID */
/*
* ARM specific type numbers. These are not currently guaranteed
#define PORT_SUNZILOG 38
#define PORT_SUNSAB 39
-/* NEC v850. */
-#define PORT_V850E_UART 40
-
/* DEC */
#define PORT_DZ 46
#define PORT_ZS 47
/* Freescale ColdFire */
#define PORT_MCF 78
-#define PORT_SC26XX 79
-
+/* Blackfin SPORT */
+#define PORT_BFIN_SPORT 79
/* MN10300 on-chip UART numbers */
#define PORT_MN10300 80
#define PORT_MN10300_CTS 81
+#define PORT_SC26XX 82
+
+/* SH-SCI */
+#define PORT_SCIFA 83
+
+#define PORT_S3C6400 84
+
+/* NWPSERIAL */
+#define PORT_NWPSERIAL 85
+
+/* MAX3100 */
+#define PORT_MAX3100 86
+
+/* Timberdale UART */
+#define PORT_TIMBUART 87
+
+/* Qualcomm MSM SoCs */
+#define PORT_MSM 88
+
+/* BCM63xx family SoCs */
+#define PORT_BCM63XX 89
+
+/* Aeroflex Gaisler GRLIB APBUART */
+#define PORT_APBUART 90
+
#ifdef __KERNEL__
#include <linux/compiler.h>
#include <linux/sysrq.h>
struct uart_port;
-struct uart_info;
struct serial_struct;
struct device;
void (*break_ctl)(struct uart_port *, int ctl);
int (*startup)(struct uart_port *);
void (*shutdown)(struct uart_port *);
+ void (*flush_buffer)(struct uart_port *);
void (*set_termios)(struct uart_port *, struct ktermios *new,
struct ktermios *old);
+ void (*set_ldisc)(struct uart_port *);
void (*pm)(struct uart_port *, unsigned int state,
unsigned int oldstate);
int (*set_wake)(struct uart_port *, unsigned int state);
void (*config_port)(struct uart_port *, int);
int (*verify_port)(struct uart_port *, struct serial_struct *);
int (*ioctl)(struct uart_port *, unsigned int, unsigned long);
+#ifdef CONFIG_CONSOLE_POLL
+ void (*poll_put_char)(struct uart_port *, unsigned char);
+ int (*poll_get_char)(struct uart_port *);
+#endif
};
#define UART_CONFIG_TYPE (1 << 0)
struct uart_port {
spinlock_t lock; /* port lock */
- unsigned int iobase; /* in/out[bwl] */
+ unsigned long iobase; /* in/out[bwl] */
unsigned char __iomem *membase; /* read/write[bwl] */
+ unsigned int (*serial_in)(struct uart_port *, int);
+ void (*serial_out)(struct uart_port *, int, int);
unsigned int irq; /* irq number */
+ unsigned long irqflags; /* irq flags */
unsigned int uartclk; /* base uart clock */
unsigned int fifosize; /* tx fifo size */
unsigned char x_char; /* xon/xoff char */
unsigned int read_status_mask; /* driver specific */
unsigned int ignore_status_mask; /* driver specific */
- struct uart_info *info; /* pointer to parent info */
+ struct uart_state *state; /* pointer to parent state */
struct uart_icount icount; /* statistics */
struct console *cons; /* struct console, if any */
-#ifdef CONFIG_SERIAL_CORE_CONSOLE
+#if defined(CONFIG_SERIAL_CORE_CONSOLE) || defined(SUPPORT_SYSRQ)
unsigned long sysrq; /* sysrq timeout */
#endif
#define UPF_HARDPPS_CD ((__force upf_t) (1 << 11))
#define UPF_LOW_LATENCY ((__force upf_t) (1 << 13))
#define UPF_BUGGY_UART ((__force upf_t) (1 << 14))
+#define UPF_NO_TXEN_TEST ((__force upf_t) (1 << 15))
#define UPF_MAGIC_MULTIPLIER ((__force upf_t) (1 << 16))
#define UPF_CONS_FLOW ((__force upf_t) (1 << 23))
#define UPF_SHARE_IRQ ((__force upf_t) (1 << 24))
+/* The exact UART type is known and should not be probed. */
+#define UPF_FIXED_TYPE ((__force upf_t) (1 << 27))
#define UPF_BOOT_AUTOCONF ((__force upf_t) (1 << 28))
#define UPF_FIXED_PORT ((__force upf_t) (1 << 29))
#define UPF_DEAD ((__force upf_t) (1 << 30))
/*
* This is the state information which is persistent across opens.
- * The low level driver must not to touch any elements contained
- * within.
*/
struct uart_state {
- unsigned int close_delay; /* msec */
- unsigned int closing_wait; /* msec */
+ struct tty_port port;
-#define USF_CLOSING_WAIT_INF (0)
-#define USF_CLOSING_WAIT_NONE (~0U)
-
- int count;
int pm_state;
- struct uart_info *info;
- struct uart_port *port;
+ struct circ_buf xmit;
- struct mutex mutex;
+ struct tasklet_struct tlet;
+ struct uart_port *uart_port;
};
#define UART_XMIT_SIZE PAGE_SIZE
-typedef unsigned int __bitwise__ uif_t;
-
-/*
- * This is the state information which is only valid when the port
- * is open; it may be freed by the core driver once the device has
- * been closed. Either the low level driver or the core can modify
- * stuff here.
- */
-struct uart_info {
- struct tty_struct *tty;
- struct circ_buf xmit;
- uif_t flags;
-
-/*
- * Definitions for info->flags. These are _private_ to serial_core, and
- * are specific to this structure. They may be queried by low level drivers.
- */
-#define UIF_CHECK_CD ((__force uif_t) (1 << 25))
-#define UIF_CTS_FLOW ((__force uif_t) (1 << 26))
-#define UIF_NORMAL_ACTIVE ((__force uif_t) (1 << 29))
-#define UIF_INITIALIZED ((__force uif_t) (1 << 31))
-#define UIF_SUSPENDED ((__force uif_t) (1 << 30))
-
- int blocked_open;
-
- struct tasklet_struct tlet;
-
- wait_queue_head_t open_wait;
- wait_queue_head_t delta_msr_wait;
-};
/* number of characters left in xmit buffer before we ask for more */
#define WAKEUP_CHARS 256
#define uart_circ_chars_free(circ) \
(CIRC_SPACE((circ)->head, (circ)->tail, UART_XMIT_SIZE))
-#define uart_tx_stopped(port) \
- ((port)->info->tty->stopped || (port)->info->tty->hw_stopped)
+static inline int uart_tx_stopped(struct uart_port *port)
+{
+ struct tty_struct *tty = port->state->port.tty;
+ if(tty->stopped || tty->hw_stopped)
+ return 1;
+ return 0;
+}
/*
* The following are helper functions for the low level drivers.
#ifdef SUPPORT_SYSRQ
if (port->sysrq) {
if (ch && time_before(jiffies, port->sysrq)) {
- handle_sysrq(ch, port->info ? port->info->tty : NULL);
+ handle_sysrq(ch, port->state->port.tty);
port->sysrq = 0;
return 1;
}
*/
static inline int uart_handle_break(struct uart_port *port)
{
- struct uart_info *info = port->info;
+ struct uart_state *state = port->state;
#ifdef SUPPORT_SYSRQ
if (port->cons && port->cons->index == port->line) {
if (!port->sysrq) {
}
#endif
if (port->flags & UPF_SAK)
- do_SAK(info->tty);
+ do_SAK(state->port.tty);
return 0;
}
/**
* uart_handle_dcd_change - handle a change of carrier detect state
- * @port: uart_port structure for the open port
+ * @uport: uart_port structure for the open port
* @status: new carrier detect status, nonzero if active
*/
static inline void
-uart_handle_dcd_change(struct uart_port *port, unsigned int status)
+uart_handle_dcd_change(struct uart_port *uport, unsigned int status)
{
- struct uart_info *info = port->info;
+ struct uart_state *state = uport->state;
+ struct tty_port *port = &state->port;
- port->icount.dcd++;
+ uport->icount.dcd++;
#ifdef CONFIG_HARD_PPS
- if ((port->flags & UPF_HARDPPS_CD) && status)
+ if ((uport->flags & UPF_HARDPPS_CD) && status)
hardpps();
#endif
- if (info->flags & UIF_CHECK_CD) {
+ if (port->flags & ASYNC_CHECK_CD) {
if (status)
- wake_up_interruptible(&info->open_wait);
- else if (info->tty)
- tty_hangup(info->tty);
+ wake_up_interruptible(&port->open_wait);
+ else if (port->tty)
+ tty_hangup(port->tty);
}
}
/**
* uart_handle_cts_change - handle a change of clear-to-send state
- * @port: uart_port structure for the open port
+ * @uport: uart_port structure for the open port
* @status: new clear to send status, nonzero if active
*/
static inline void
-uart_handle_cts_change(struct uart_port *port, unsigned int status)
+uart_handle_cts_change(struct uart_port *uport, unsigned int status)
{
- struct uart_info *info = port->info;
- struct tty_struct *tty = info->tty;
+ struct tty_port *port = &uport->state->port;
+ struct tty_struct *tty = port->tty;
- port->icount.cts++;
+ uport->icount.cts++;
- if (info->flags & UIF_CTS_FLOW) {
+ if (port->flags & ASYNC_CTS_FLOW) {
if (tty->hw_stopped) {
if (status) {
tty->hw_stopped = 0;
- port->ops->start_tx(port);
- uart_write_wakeup(port);
+ uport->ops->start_tx(uport);
+ uart_write_wakeup(uport);
}
} else {
if (!status) {
tty->hw_stopped = 1;
- port->ops->stop_tx(port);
+ uport->ops->stop_tx(uport);
}
}
}
uart_insert_char(struct uart_port *port, unsigned int status,
unsigned int overrun, unsigned int ch, unsigned int flag)
{
- struct tty_struct *tty = port->info->tty;
+ struct tty_struct *tty = port->state->port.tty;
if ((status & port->ignore_status_mask & ~overrun) == 0)
tty_insert_flip_char(tty, ch, flag);