rapidio: add enabling SRIO port RX and TX

[safe/jmp/linux-2.6] / include / linux / pci_hotplug.h

diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h
index 652ba79..5d09cba 100644 (file)
--- a/include/linux/pci_hotplug.h
+++ b/include/linux/pci_hotplug.h
@@ -28,26 +28,6 @@
 #ifndef _PCI_HOTPLUG_H
 #define _PCI_HOTPLUG_H
 
-
-/* These values come from the PCI Hotplug Spec */
-enum pci_bus_speed {
-       PCI_SPEED_33MHz                 = 0x00,
-       PCI_SPEED_66MHz                 = 0x01,
-       PCI_SPEED_66MHz_PCIX            = 0x02,
-       PCI_SPEED_100MHz_PCIX           = 0x03,
-       PCI_SPEED_133MHz_PCIX           = 0x04,
-       PCI_SPEED_66MHz_PCIX_ECC        = 0x05,
-       PCI_SPEED_100MHz_PCIX_ECC       = 0x06,
-       PCI_SPEED_133MHz_PCIX_ECC       = 0x07,
-       PCI_SPEED_66MHz_PCIX_266        = 0x09,
-       PCI_SPEED_100MHz_PCIX_266       = 0x0a,
-       PCI_SPEED_133MHz_PCIX_266       = 0x0b,
-       PCI_SPEED_66MHz_PCIX_533        = 0x11,
-       PCI_SPEED_100MHz_PCIX_533       = 0x12,
-       PCI_SPEED_133MHz_PCIX_533       = 0x13,
-       PCI_SPEED_UNKNOWN               = 0xff,
-};
-
 /* These values come from the PCI Express Spec */
 enum pcie_link_width {
        PCIE_LNK_WIDTH_RESRV    = 0x00,
@@ -61,12 +41,6 @@ enum pcie_link_width {
        PCIE_LNK_WIDTH_UNKNOWN  = 0xFF,
 };
 
-enum pcie_link_speed {
-       PCIE_2_5GB              = 0x14,
-       PCIE_5_0GB              = 0x15,
-       PCIE_LNK_SPEED_UNKNOWN  = 0xFF,
-};
-
 /**
  * struct hotplug_slot_ops -the callbacks that the hotplug pci core can use
  * @owner: The module owner of this structure
@@ -89,12 +63,6 @@ enum pcie_link_speed {
  * @get_adapter_status: Called to get see if an adapter is present in the slot or not.
  *     If this field is NULL, the value passed in the struct hotplug_slot_info
  *     will be used when this value is requested by a user.
- * @get_max_bus_speed: Called to get the max bus speed for a slot.
- *     If this field is NULL, the value passed in the struct hotplug_slot_info
- *     will be used when this value is requested by a user.
- * @get_cur_bus_speed: Called to get the current bus speed for a slot.
- *     If this field is NULL, the value passed in the struct hotplug_slot_info
- *     will be used when this value is requested by a user.
  *
  * The table of function pointers that is passed to the hotplug pci core by a
  * hotplug pci driver.  These functions are called by the hotplug pci core when
@@ -112,17 +80,14 @@ struct hotplug_slot_ops {
        int (*get_attention_status)     (struct hotplug_slot *slot, u8 *value);
        int (*get_latch_status)         (struct hotplug_slot *slot, u8 *value);
        int (*get_adapter_status)       (struct hotplug_slot *slot, u8 *value);
-       int (*get_max_bus_speed)        (struct hotplug_slot *slot, enum pci_bus_speed *value);
-       int (*get_cur_bus_speed)        (struct hotplug_slot *slot, enum pci_bus_speed *value);
 };
 
 /**
  * struct hotplug_slot_info - used to notify the hotplug pci core of the state of the slot
- * @power: if power is enabled or not (1/0)
+ * @power_status: if power is enabled or not (1/0)
  * @attention_status: if the attention light is enabled or not (1/0)
  * @latch_status: if the latch (if any) is open or closed (1/0)
- * @adapter_present: if there is a pci board present in the slot or not (1/0)
- * @address: (domain << 16 | bus << 8 | dev)
+ * @adapter_status: if there is a pci board present in the slot or not (1/0)
  *
  * Used to notify the hotplug pci core of the status of a specific slot.
  */
@@ -131,8 +96,6 @@ struct hotplug_slot_info {
        u8      attention_status;
        u8      latch_status;
        u8      adapter_status;
-       enum pci_bus_speed      max_bus_speed;
-       enum pci_bus_speed      cur_bus_speed;
 };
 
 /**