* %NL80211_ATTR_IE. If the command succeeds, the requested data will be
* added to all specified management frames generated by
* kernel/firmware/driver.
+ * Note: This command has been removed and it is only reserved at this
+ * point to avoid re-using existing command number. The functionality this
+ * command was planned for has been provided with cleaner design with the
+ * option to specify additional IEs in NL80211_CMD_TRIGGER_SCAN,
+ * NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE,
+ * NL80211_CMD_DEAUTHENTICATE, and NL80211_CMD_DISASSOCIATE.
*
* @NL80211_CMD_GET_SCAN: get scan results
* @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters
* %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on
* to (%NL80211_ATTR_REG_ALPHA2).
*
+ * @NL80211_CMD_AUTHENTICATE: authentication request and notification.
+ * This command is used both as a command (request to authenticate) and
+ * as an event on the "mlme" multicast group indicating completion of the
+ * authentication process.
+ * When used as a command, %NL80211_ATTR_IFINDEX is used to identify the
+ * interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and
+ * BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify
+ * the SSID (mainly for association, but is included in authentication
+ * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used
+ * to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE
+ * is used to specify the authentication type. %NL80211_ATTR_IE is used to
+ * define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs)
+ * to be added to the frame.
+ * When used as an event, this reports reception of an Authentication
+ * frame in station and IBSS modes when the local MLME processed the
+ * frame, i.e., it was for the local STA and was received in correct
+ * state. This is similar to MLME-AUTHENTICATE.confirm primitive in the
+ * MLME SAP interface (kernel providing MLME, userspace SME). The
+ * included NL80211_ATTR_FRAME attribute contains the management frame
+ * (including both the header and frame body, but not FCS).
+ * @NL80211_CMD_ASSOCIATE: association request and notification; like
+ * NL80211_CMD_AUTHENTICATE but for Association and Reassociation
+ * (similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request,
+ * MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives).
+ * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like
+ * NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to
+ * MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication
+ * primitives).
+ * @NL80211_CMD_DISASSOCIATE: disassociation request and notification; like
+ * NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to
+ * MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives).
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
NL80211_CMD_GET_MESH_PARAMS,
NL80211_CMD_SET_MESH_PARAMS,
- NL80211_CMD_SET_MGMT_EXTRA_IE,
+ NL80211_CMD_SET_MGMT_EXTRA_IE /* reserved; not used */,
NL80211_CMD_GET_REG,
NL80211_CMD_REG_CHANGE,
+ NL80211_CMD_AUTHENTICATE,
+ NL80211_CMD_ASSOCIATE,
+ NL80211_CMD_DEAUTHENTICATE,
+ NL80211_CMD_DISASSOCIATE,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
*/
#define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS
#define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE
-
#define NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE
+#define NL80211_CMD_AUTHENTICATE NL80211_CMD_AUTHENTICATE
+#define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE
+#define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE
+#define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE
/**
* enum nl80211_attrs - nl80211 netlink attributes
* @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently
* set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*)
*
+ * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies
+ * an array of command numbers (i.e. a mapping index to command number)
+ * that the driver for the given wiphy supports.
+ *
+ * @NL80211_ATTR_FRAME: frame data (binary attribute), including frame header
+ * and body, but not FCS; used, e.g., with NL80211_CMD_AUTHENTICATE and
+ * NL80211_CMD_ASSOCIATE events
+ * @NL80211_ATTR_SSID: SSID (binary attribute, 0..32 octets)
+ * @NL80211_ATTR_AUTH_TYPE: AuthenticationType, see &enum nl80211_auth_type,
+ * represented as a u32
+ * @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and
+ * %NL80211_CMD_DISASSOCIATE, u16
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
NL80211_ATTR_REG_INITIATOR,
NL80211_ATTR_REG_TYPE,
+ NL80211_ATTR_SUPPORTED_COMMANDS,
+
+ NL80211_ATTR_FRAME,
+ NL80211_ATTR_SSID,
+ NL80211_ATTR_AUTH_TYPE,
+ NL80211_ATTR_REASON_CODE,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
#define NL80211_ATTR_IE NL80211_ATTR_IE
#define NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR
#define NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE
+#define NL80211_ATTR_FRAME NL80211_ATTR_FRAME
+#define NL80211_ATTR_SSID NL80211_ATTR_SSID
+#define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE
+#define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE
#define NL80211_MAX_SUPP_RATES 32
#define NL80211_MAX_SUPP_REG_RULES 32
NL80211_BSS_MAX = __NL80211_BSS_AFTER_LAST - 1
};
+/**
+ * enum nl80211_auth_type - AuthenticationType
+ *
+ * @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication
+ * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only)
+ * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r)
+ * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP)
+ */
+enum nl80211_auth_type {
+ NL80211_AUTHTYPE_OPEN_SYSTEM,
+ NL80211_AUTHTYPE_SHARED_KEY,
+ NL80211_AUTHTYPE_FT,
+ NL80211_AUTHTYPE_NETWORK_EAP,
+};
#endif /* __LINUX_NL80211_H */
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff