* @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by
* %NL80211_ATTR_IFINDEX.
*
+ * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command
+ * after being queried by the kernel. CRDA replies by sending a regulatory
+ * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
+ * current alpha2 if it found a match. It also provides
+ * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each
+ * regulatory rule is a nested set of attributes given by
+ * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and
+ * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by
+ * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and
+ * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP.
+ * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain
+ * to the the specified ISO/IEC 3166-1 alpha2 country code. The core will
+ * store this as a valid request and then query userspace for it.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
NL80211_CMD_SET_BSS,
- /* add commands here */
+ NL80211_CMD_SET_REG,
+ NL80211_CMD_REQ_SET_REG,
+
+ /* add new commands above here */
/* used to define NL80211_CMD_MAX below */
__NL80211_CMD_AFTER_LAST,
* info given for %NL80211_CMD_GET_MPATH, nested attribute described at
* &enum nl80211_mpath_info.
*
- *
* @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of
* &enum nl80211_mntr_flags.
*
+ * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the
+ * current regulatory domain should be set to or is already set to.
+ * For example, 'CR', for Costa Rica. This attribute is used by the kernel
+ * to query the CRDA to retrieve one regulatory domain. This attribute can
+ * also be used by userspace to query the kernel for the currently set
+ * regulatory domain. We chose an alpha2 as that is also used by the
+ * IEEE-802.11d country information element to identify a country.
+ * Users can also simply ask the wireless core to set regulatory domain
+ * to a specific alpha2.
+ * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory
+ * rules.
+ *
* @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1)
* @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled
* (u8, 0 or 1)
NL80211_ATTR_SUPPORTED_IFTYPES,
+ NL80211_ATTR_REG_ALPHA2,
+ NL80211_ATTR_REG_RULES,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
#define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY
#define NL80211_MAX_SUPP_RATES 32
+#define NL80211_MAX_SUPP_REG_RULES 32
#define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0
#define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16
#define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24
};
/**
+ * enum nl80211_reg_rule_attr - regulatory rule attributes
+ * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional
+ * considerations for a given frequency range. These are the
+ * &enum nl80211_reg_rule_flags.
+ * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory
+ * rule in KHz. This is not a center of frequency but an actual regulatory
+ * band edge.
+ * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule
+ * in KHz. This is not a center a frequency but an actual regulatory
+ * band edge.
+ * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this
+ * frequency range, in KHz.
+ * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain
+ * for a given frequency range. The value is in mBi (100 * dBi).
+ * If you don't have one then don't send this.
+ * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for
+ * a given frequency range. The value is in mBm (100 * dBm).
+ */
+enum nl80211_reg_rule_attr {
+ __NL80211_REG_RULE_ATTR_INVALID,
+ NL80211_ATTR_REG_RULE_FLAGS,
+
+ NL80211_ATTR_FREQ_RANGE_START,
+ NL80211_ATTR_FREQ_RANGE_END,
+ NL80211_ATTR_FREQ_RANGE_MAX_BW,
+
+ NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN,
+ NL80211_ATTR_POWER_RULE_MAX_EIRP,
+
+ /* keep last */
+ __NL80211_REG_RULE_ATTR_AFTER_LAST,
+ NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_reg_rule_flags - regulatory rule flags
+ *
+ * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed
+ * @NL80211_RRF_NO_CCK: CCK modulation not allowed
+ * @NL80211_RRF_NO_INDOOR: indoor operation not allowed
+ * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed
+ * @NL80211_RRF_DFS: DFS support is required to be used
+ * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links
+ * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links
+ * @NL80211_RRF_PASSIVE_SCAN: passive scan is required
+ * @NL80211_RRF_NO_IBSS: no IBSS is allowed
+ */
+enum nl80211_reg_rule_flags {
+ NL80211_RRF_NO_OFDM = 1<<0,
+ NL80211_RRF_NO_CCK = 1<<1,
+ NL80211_RRF_NO_INDOOR = 1<<2,
+ NL80211_RRF_NO_OUTDOOR = 1<<3,
+ NL80211_RRF_DFS = 1<<4,
+ NL80211_RRF_PTP_ONLY = 1<<5,
+ NL80211_RRF_PTMP_ONLY = 1<<6,
+ NL80211_RRF_PASSIVE_SCAN = 1<<7,
+ NL80211_RRF_NO_IBSS = 1<<8,
+};
+
+/**
* enum nl80211_mntr_flags - monitor configuration flags
*
* Monitor configuration flags.
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff