*
*/
+#include <linux/types.h>
+
/**
* DOC: Station handling
*
* to get a list of all present wiphys.
* @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
* %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME,
- * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, and/or
- * %NL80211_ATTR_WIPHY_CHANNEL_TYPE.
+ * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ,
+ * %NL80211_ATTR_WIPHY_CHANNEL_TYPE, %NL80211_ATTR_WIPHY_RETRY_SHORT,
+ * %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
+ * and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD.
* @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
* or rename notification. Has attributes %NL80211_ATTR_WIPHY and
* %NL80211_ATTR_WIPHY_NAME.
* @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT,
* %NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD.
* @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA,
- * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC and %NL80211_ATTR_KEY_CIPHER
- * attributes.
+ * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER,
+ * and %NL80211_ATTR_KEY_SEQ attributes.
* @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX
* or %NL80211_ATTR_MAC.
*
* frame, i.e., it was for the local STA and was received in correct
* state. This is similar to MLME-AUTHENTICATE.confirm primitive in the
* MLME SAP interface (kernel providing MLME, userspace SME). The
- * included NL80211_ATTR_FRAME attribute contains the management frame
- * (including both the header and frame body, but not FCS).
+ * included %NL80211_ATTR_FRAME attribute contains the management frame
+ * (including both the header and frame body, but not FCS). This event is
+ * also used to indicate if the authentication attempt timed out. In that
+ * case the %NL80211_ATTR_FRAME attribute is replaced with a
+ * %NL80211_ATTR_TIMED_OUT flag (and %NL80211_ATTR_MAC to indicate which
+ * pending authentication timed out).
* @NL80211_CMD_ASSOCIATE: association request and notification; like
* NL80211_CMD_AUTHENTICATE but for Association and Reassociation
* (similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request,
* %NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this
* event matches with MLME-MICHAELMICFAILURE.indication() primitive
*
+ * @NL80211_CMD_JOIN_IBSS: Join a new IBSS -- given at least an SSID and a
+ * FREQ attribute (for the initial frequency if no peer can be found)
+ * and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those
+ * should be fixed rather than automatically determined. Can only be
+ * executed on a network interface that is UP, and fixed BSSID/FREQ
+ * may be rejected. Another optional parameter is the beacon interval,
+ * given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not
+ * given defaults to 100 TU (102.4ms).
+ * @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is
+ * determined by the network interface.
+ *
+ * @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute
+ * to identify the device, and the TESTDATA blob attribute to pass through
+ * to the driver.
+ *
+ * @NL80211_CMD_CONNECT: connection request and notification; this command
+ * requests to connect to a specified network but without separating
+ * auth and assoc steps. For this, you need to specify the SSID in a
+ * %NL80211_ATTR_SSID attribute, and can optionally specify the association
+ * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC,
+ * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_CONTROL_PORT.
+ * It is also sent as an event, with the BSSID and response IEs when the
+ * connection is established or failed to be established. This can be
+ * determined by the STATUS_CODE attribute.
+ * @NL80211_CMD_ROAM: request that the card roam (currently not implemented),
+ * sent as an event when the card/driver roamed by itself.
+ * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
+ * userspace that a connection was dropped by the AP or due to other
+ * reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and
+ * %NL80211_ATTR_REASON_CODE attributes are used.
+ *
+ * @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices
+ * associated with this wiphy must be down and will follow.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
NL80211_CMD_REG_BEACON_HINT,
+ NL80211_CMD_JOIN_IBSS,
+ NL80211_CMD_LEAVE_IBSS,
+
+ NL80211_CMD_TESTMODE,
+
+ NL80211_CMD_CONNECT,
+ NL80211_CMD_ROAM,
+ NL80211_CMD_DISCONNECT,
+
+ NL80211_CMD_SET_WIPHY_NETNS,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
* NL80211_CHAN_HT20 = HT20 only
* NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel
* NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel
+ * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is
+ * less than or equal to the RTS threshold; allowed range: 1..255;
+ * dot11ShortRetryLimit; u8
+ * @NL80211_ATTR_WIPHY_RETRY_LONG: TX retry limit for frames whose length is
+ * greater than the RTS threshold; allowed range: 1..255;
+ * dot11ShortLongLimit; u8
+ * @NL80211_ATTR_WIPHY_FRAG_THRESHOLD: fragmentation threshold, i.e., maximum
+ * length in octets for frames; allowed range: 256..8000, disable
+ * fragmentation with (u32)-1; dot11FragmentationThreshold; u32
+ * @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length
+ * larger than or equal to this use RTS/CTS handshake); allowed range:
+ * 0..65536, disable with (u32)-1; dot11RTSThreshold; u32
*
* @NL80211_ATTR_IFINDEX: network interface index of the device to operate on
* @NL80211_ATTR_IFNAME: network interface name
*
* @NL80211_ATTR_STA_AID: Association ID for the station (u16)
* @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of
- * &enum nl80211_sta_flags.
+ * &enum nl80211_sta_flags (deprecated, use %NL80211_ATTR_STA_FLAGS2)
* @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by
* IEEE 802.11 7.3.1.6 (u16).
* @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported
* @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz)
* @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive
* scanning and include a zero-length SSID (wildcard) for wildcard scan
- * @NL80211_ATTR_SCAN_GENERATION: the scan generation increases whenever the
- * scan result list changes (BSS expired or added) so that applications
- * can verify that they got a single, consistent snapshot (when all dump
- * messages carried the same generation number)
* @NL80211_ATTR_BSS: scan result BSS
*
* @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain
* @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported
* cipher suites
*
+ * @NL80211_ATTR_FREQ_FIXED: a flag indicating the IBSS should not try to look
+ * for other networks on different channels
+ *
+ * @NL80211_ATTR_TIMED_OUT: a flag indicating than an operation timed out; this
+ * is used, e.g., with %NL80211_CMD_AUTHENTICATE event
+ *
+ * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is
+ * used for the association (&enum nl80211_mfp, represented as a u32);
+ * this attribute can be used
+ * with %NL80211_CMD_ASSOCIATE request
+ *
+ * @NL80211_ATTR_STA_FLAGS2: Attribute containing a
+ * &struct nl80211_sta_flag_update.
+ *
+ * @NL80211_ATTR_CONTROL_PORT: A flag indicating whether user space controls
+ * IEEE 802.1X port, i.e., sets/clears %NL80211_STA_FLAG_AUTHORIZED, in
+ * station mode. If the flag is included in %NL80211_CMD_ASSOCIATE
+ * request, the driver will assume that the port is unauthorized until
+ * authorized by user space. Otherwise, port is marked authorized by
+ * default in station mode.
+ *
+ * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
+ * We recommend using nested, driver-specific attributes within this.
+ *
+ * @NL80211_ATTR_DISCONNECTED_BY_AP: A flag indicating that the DISCONNECT
+ * event was due to the AP disconnecting the station, and not due to
+ * a local disconnect request.
+ * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT
+ * event (u16)
+ * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating
+ * that protected APs should be used.
+ *
+ * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT and ASSOCIATE to
+ * indicate which unicast key ciphers will be used with the connection
+ * (an array of u32).
+ * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT and ASSOCIATE to indicate
+ * which group key cipher will be used with the connection (a u32).
+ * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT and ASSOCIATE to indicate
+ * which WPA version(s) the AP we want to associate with is using
+ * (a u32 with flags from &enum nl80211_wpa_versions).
+ * @NL80211_ATTR_AKM_SUITES: Used with CONNECT and ASSOCIATE to indicate
+ * which key management algorithm(s) to use (an array of u32).
+ *
+ * @NL80211_ATTR_REQ_IE: (Re)association request information elements as
+ * sent out by the card, for ROAM and successful CONNECT events.
+ * @NL80211_ATTR_RESP_IE: (Re)association response information elements as
+ * sent by peer, for ROAM and successful CONNECT events.
+ *
+ * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used by in ASSOCIATE
+ * commands to specify using a reassociate frame
+ *
+ * @NL80211_ATTR_KEY: key information in a nested attribute with
+ * %NL80211_KEY_* sub-attributes
+ * @NL80211_ATTR_KEYS: array of keys for static WEP keys for connect()
+ * and join_ibss(), key information is in a nested attribute each
+ * with %NL80211_KEY_* sub-attributes
+ *
+ * @NL80211_ATTR_PID: Process ID of a network namespace.
+ *
+ * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for
+ * dumps. This number increases whenever the object list being
+ * dumped changes, and as such userspace can verify that it has
+ * obtained a complete and consistent snapshot by verifying that
+ * all dump messages contain the same generation number. If it
+ * changed then the list changed and the dump should be repeated
+ * completely from scratch.
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
NL80211_ATTR_SCAN_FREQUENCIES,
NL80211_ATTR_SCAN_SSIDS,
- NL80211_ATTR_SCAN_GENERATION,
+ NL80211_ATTR_GENERATION, /* replaces old SCAN_GENERATION */
NL80211_ATTR_BSS,
NL80211_ATTR_REG_INITIATOR,
NL80211_ATTR_FREQ_BEFORE,
NL80211_ATTR_FREQ_AFTER,
+
+ NL80211_ATTR_FREQ_FIXED,
+
+
+ NL80211_ATTR_WIPHY_RETRY_SHORT,
+ NL80211_ATTR_WIPHY_RETRY_LONG,
+ NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
+ NL80211_ATTR_WIPHY_RTS_THRESHOLD,
+
+ NL80211_ATTR_TIMED_OUT,
+
+ NL80211_ATTR_USE_MFP,
+
+ NL80211_ATTR_STA_FLAGS2,
+
+ NL80211_ATTR_CONTROL_PORT,
+
+ NL80211_ATTR_TESTDATA,
+
+ NL80211_ATTR_PRIVACY,
+
+ NL80211_ATTR_DISCONNECTED_BY_AP,
+ NL80211_ATTR_STATUS_CODE,
+
+ NL80211_ATTR_CIPHER_SUITES_PAIRWISE,
+ NL80211_ATTR_CIPHER_SUITE_GROUP,
+ NL80211_ATTR_WPA_VERSIONS,
+ NL80211_ATTR_AKM_SUITES,
+
+ NL80211_ATTR_REQ_IE,
+ NL80211_ATTR_RESP_IE,
+
+ NL80211_ATTR_PREV_BSSID,
+
+ NL80211_ATTR_KEY,
+ NL80211_ATTR_KEYS,
+
+ NL80211_ATTR_PID,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1
};
+/* source-level API compatibility */
+#define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION
+
/*
* Allow user space programs to use #ifdef on new attributes by defining them
* here
*/
+#define NL80211_CMD_CONNECT NL80211_CMD_CONNECT
#define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY
#define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES
#define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS
#define NL80211_ATTR_SSID NL80211_ATTR_SSID
#define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE
#define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE
+#define NL80211_ATTR_CIPHER_SUITES_PAIRWISE NL80211_ATTR_CIPHER_SUITES_PAIRWISE
+#define NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP
+#define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS
+#define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES
+#define NL80211_ATTR_KEY NL80211_ATTR_KEY
+#define NL80211_ATTR_KEYS NL80211_ATTR_KEYS
#define NL80211_MAX_SUPP_RATES 32
#define NL80211_MAX_SUPP_REG_RULES 32
#define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24
#define NL80211_HT_CAPABILITY_LEN 26
+#define NL80211_MAX_NR_CIPHER_SUITES 5
+#define NL80211_MAX_NR_AKM_SUITES 2
+
/**
* enum nl80211_iftype - (virtual) interface types
*
};
/**
+ * struct nl80211_sta_flag_update - station flags mask/set
+ * @mask: mask of station flags to set
+ * @set: which values to set them to
+ *
+ * Both mask and set contain bits as per &enum nl80211_sta_flags.
+ */
+struct nl80211_sta_flag_update {
+ __u32 mask;
+ __u32 set;
+} __attribute__((packed));
+
+/**
* enum nl80211_rate_info - bitrate information
*
* These attribute types are used with %NL80211_STA_INFO_TXRATE
* in mBm (100 * dBm) (s32)
* @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon
* in unspecified units, scaled to 0..100 (u8)
+ * @NL80211_BSS_STATUS: status, if this BSS is "used"
+ * @NL80211_BSS_SEEN_MS_AGO: age of this BSS entry in ms
* @__NL80211_BSS_AFTER_LAST: internal
* @NL80211_BSS_MAX: highest BSS attribute
*/
NL80211_BSS_INFORMATION_ELEMENTS,
NL80211_BSS_SIGNAL_MBM,
NL80211_BSS_SIGNAL_UNSPEC,
+ NL80211_BSS_STATUS,
+ NL80211_BSS_SEEN_MS_AGO,
/* keep last */
__NL80211_BSS_AFTER_LAST,
};
/**
+ * enum nl80211_bss_status - BSS "status"
+ */
+enum nl80211_bss_status {
+ NL80211_BSS_STATUS_AUTHENTICATED,
+ NL80211_BSS_STATUS_ASSOCIATED,
+ NL80211_BSS_STATUS_IBSS_JOINED,
+};
+
+/**
* enum nl80211_auth_type - AuthenticationType
*
* @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication
* @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only)
* @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r)
* @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP)
+ * @__NL80211_AUTHTYPE_NUM: internal
+ * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm
+ * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by
+ * trying multiple times); this is invalid in netlink -- leave out
+ * the attribute for this on CONNECT commands.
*/
enum nl80211_auth_type {
NL80211_AUTHTYPE_OPEN_SYSTEM,
NL80211_AUTHTYPE_SHARED_KEY,
NL80211_AUTHTYPE_FT,
NL80211_AUTHTYPE_NETWORK_EAP,
+
+ /* keep last */
+ __NL80211_AUTHTYPE_NUM,
+ NL80211_AUTHTYPE_MAX = __NL80211_AUTHTYPE_NUM - 1,
+ NL80211_AUTHTYPE_AUTOMATIC
};
/**
NL80211_KEYTYPE_PEERKEY,
};
+/**
+ * enum nl80211_mfp - Management frame protection state
+ * @NL80211_MFP_NO: Management frame protection not used
+ * @NL80211_MFP_REQUIRED: Management frame protection required
+ */
+enum nl80211_mfp {
+ NL80211_MFP_NO,
+ NL80211_MFP_REQUIRED,
+};
+
+enum nl80211_wpa_versions {
+ NL80211_WPA_VERSION_1 = 1 << 0,
+ NL80211_WPA_VERSION_2 = 1 << 1,
+};
+
+/**
+ * enum nl80211_key_attributes - key attributes
+ * @__NL80211_KEY_INVALID: invalid
+ * @NL80211_KEY_DATA: (temporal) key data; for TKIP this consists of
+ * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC
+ * keys
+ * @NL80211_KEY_IDX: key ID (u8, 0-3)
+ * @NL80211_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11
+ * section 7.3.2.25.1, e.g. 0x000FAC04)
+ * @NL80211_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
+ * CCMP keys, each six bytes in little endian
+ * @NL80211_KEY_DEFAULT: flag indicating default key
+ * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key
+ * @__NL80211_KEY_AFTER_LAST: internal
+ * @NL80211_KEY_MAX: highest key attribute
+ */
+enum nl80211_key_attributes {
+ __NL80211_KEY_INVALID,
+ NL80211_KEY_DATA,
+ NL80211_KEY_IDX,
+ NL80211_KEY_CIPHER,
+ NL80211_KEY_SEQ,
+ NL80211_KEY_DEFAULT,
+ NL80211_KEY_DEFAULT_MGMT,
+
+ /* keep last */
+ __NL80211_KEY_AFTER_LAST,
+ NL80211_KEY_MAX = __NL80211_KEY_AFTER_LAST - 1
+};
+
#endif /* __LINUX_NL80211_H */
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff