* @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons,
* partial scan results may be available
*
+ * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation
+ * or noise level
+ * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to
+ * NL80211_CMD_GET_SURVEY and on the "scan" multicast group)
+ *
* @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
* has been changed and provides details of the request information
* that caused the change such as who initiated the regulatory request
* to identify the device, and the TESTDATA blob attribute to pass through
* to the driver.
*
+ * @NL80211_CMD_CONNECT: connection request and notification; this command
+ * requests to connect to a specified network but without separating
+ * auth and assoc steps. For this, you need to specify the SSID in a
+ * %NL80211_ATTR_SSID attribute, and can optionally specify the association
+ * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC,
+ * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_CONTROL_PORT.
+ * It is also sent as an event, with the BSSID and response IEs when the
+ * connection is established or failed to be established. This can be
+ * determined by the STATUS_CODE attribute.
+ * @NL80211_CMD_ROAM: request that the card roam (currently not implemented),
+ * sent as an event when the card/driver roamed by itself.
+ * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
+ * userspace that a connection was dropped by the AP or due to other
+ * reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and
+ * %NL80211_ATTR_REASON_CODE attributes are used.
+ *
+ * @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices
+ * associated with this wiphy must be down and will follow.
+ *
+ * @NL80211_CMD_REMAIN_ON_CHANNEL: Request to remain awake on the specified
+ * channel for the specified amount of time. This can be used to do
+ * off-channel operations like transmit a Public Action frame and wait for
+ * a response while being associated to an AP on another channel.
+ * %NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify which
+ * radio is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the
+ * frequency for the operation and %NL80211_ATTR_WIPHY_CHANNEL_TYPE may be
+ * optionally used to specify additional channel parameters.
+ * %NL80211_ATTR_DURATION is used to specify the duration in milliseconds
+ * to remain on the channel. This command is also used as an event to
+ * notify when the requested duration starts (it may take a while for the
+ * driver to schedule this time due to other concurrent needs for the
+ * radio).
+ * When called, this operation returns a cookie (%NL80211_ATTR_COOKIE)
+ * that will be included with any events pertaining to this request;
+ * the cookie is also used to cancel the request.
+ * @NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL: This command can be used to cancel a
+ * pending remain-on-channel duration if the desired operation has been
+ * completed prior to expiration of the originally requested duration.
+ * %NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify the
+ * radio. The %NL80211_ATTR_COOKIE attribute must be given as well to
+ * uniquely identify the request.
+ * This command is also used as an event to notify when a requested
+ * remain-on-channel duration has expired.
+ *
+ * @NL80211_CMD_SET_TX_BITRATE_MASK: Set the mask of rates to be used in TX
+ * rate selection. %NL80211_ATTR_IFINDEX is used to specify the interface
+ * and @NL80211_ATTR_TX_RATES the set of allowed rates.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
NL80211_CMD_TESTMODE,
+ NL80211_CMD_CONNECT,
+ NL80211_CMD_ROAM,
+ NL80211_CMD_DISCONNECT,
+
+ NL80211_CMD_SET_WIPHY_NETNS,
+
+ NL80211_CMD_GET_SURVEY,
+ NL80211_CMD_NEW_SURVEY_RESULTS,
+
+ NL80211_CMD_SET_PMKSA,
+ NL80211_CMD_DEL_PMKSA,
+ NL80211_CMD_FLUSH_PMKSA,
+
+ NL80211_CMD_REMAIN_ON_CHANNEL,
+ NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL,
+
+ NL80211_CMD_SET_TX_BITRATE_MASK,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
* @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length
* larger than or equal to this use RTS/CTS handshake); allowed range:
* 0..65536, disable with (u32)-1; dot11RTSThreshold; u32
+ * @NL80211_ATTR_WIPHY_COVERAGE_CLASS: Coverage Class as defined by IEEE 802.11
+ * section 7.3.2.9; dot11CoverageClass; u8
*
* @NL80211_ATTR_IFINDEX: network interface index of the device to operate on
* @NL80211_ATTR_IFNAME: network interface name
* @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz)
* @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive
* scanning and include a zero-length SSID (wildcard) for wildcard scan
- * @NL80211_ATTR_SCAN_GENERATION: the scan generation increases whenever the
- * scan result list changes (BSS expired or added) so that applications
- * can verify that they got a single, consistent snapshot (when all dump
- * messages carried the same generation number)
* @NL80211_ATTR_BSS: scan result BSS
*
* @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain
* @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
* We recommend using nested, driver-specific attributes within this.
*
+ * @NL80211_ATTR_DISCONNECTED_BY_AP: A flag indicating that the DISCONNECT
+ * event was due to the AP disconnecting the station, and not due to
+ * a local disconnect request.
+ * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT
+ * event (u16)
+ * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating
+ * that protected APs should be used.
+ *
+ * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT and ASSOCIATE to
+ * indicate which unicast key ciphers will be used with the connection
+ * (an array of u32).
+ * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT and ASSOCIATE to indicate
+ * which group key cipher will be used with the connection (a u32).
+ * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT and ASSOCIATE to indicate
+ * which WPA version(s) the AP we want to associate with is using
+ * (a u32 with flags from &enum nl80211_wpa_versions).
+ * @NL80211_ATTR_AKM_SUITES: Used with CONNECT and ASSOCIATE to indicate
+ * which key management algorithm(s) to use (an array of u32).
+ *
+ * @NL80211_ATTR_REQ_IE: (Re)association request information elements as
+ * sent out by the card, for ROAM and successful CONNECT events.
+ * @NL80211_ATTR_RESP_IE: (Re)association response information elements as
+ * sent by peer, for ROAM and successful CONNECT events.
+ *
+ * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used by in ASSOCIATE
+ * commands to specify using a reassociate frame
+ *
+ * @NL80211_ATTR_KEY: key information in a nested attribute with
+ * %NL80211_KEY_* sub-attributes
+ * @NL80211_ATTR_KEYS: array of keys for static WEP keys for connect()
+ * and join_ibss(), key information is in a nested attribute each
+ * with %NL80211_KEY_* sub-attributes
+ *
+ * @NL80211_ATTR_PID: Process ID of a network namespace.
+ *
+ * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for
+ * dumps. This number increases whenever the object list being
+ * dumped changes, and as such userspace can verify that it has
+ * obtained a complete and consistent snapshot by verifying that
+ * all dump messages contain the same generation number. If it
+ * changed then the list changed and the dump should be repeated
+ * completely from scratch.
+ *
+ * @NL80211_ATTR_4ADDR: Use 4-address frames on a virtual interface
+ *
+ * @NL80211_ATTR_SURVEY_INFO: survey information about a channel, part of
+ * the survey response for %NL80211_CMD_GET_SURVEY, nested attribute
+ * containing info as possible, see &enum survey_info.
+ *
+ * @NL80211_ATTR_PMKID: PMK material for PMKSA caching.
+ * @NL80211_ATTR_MAX_NUM_PMKIDS: maximum number of PMKIDs a firmware can
+ * cache, a wiphy attribute.
+ *
+ * @NL80211_ATTR_DURATION: Duration of an operation in milliseconds, u32.
+ *
+ * @NL80211_ATTR_COOKIE: Generic 64-bit cookie to identify objects.
+ *
+ * @NL80211_ATTR_TX_RATES: Nested set of attributes
+ * (enum nl80211_tx_rate_attributes) describing TX rates per band. The
+ * enum nl80211_band value is used as the index (nla_type() of the nested
+ * data. If a band is not included, it will be configured to allow all
+ * rates based on negotiated supported rates information. This attribute
+ * is used with %NL80211_CMD_SET_TX_BITRATE_MASK.
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
NL80211_ATTR_SCAN_FREQUENCIES,
NL80211_ATTR_SCAN_SSIDS,
- NL80211_ATTR_SCAN_GENERATION,
+ NL80211_ATTR_GENERATION, /* replaces old SCAN_GENERATION */
NL80211_ATTR_BSS,
NL80211_ATTR_REG_INITIATOR,
NL80211_ATTR_TESTDATA,
+ NL80211_ATTR_PRIVACY,
+
+ NL80211_ATTR_DISCONNECTED_BY_AP,
+ NL80211_ATTR_STATUS_CODE,
+
+ NL80211_ATTR_CIPHER_SUITES_PAIRWISE,
+ NL80211_ATTR_CIPHER_SUITE_GROUP,
+ NL80211_ATTR_WPA_VERSIONS,
+ NL80211_ATTR_AKM_SUITES,
+
+ NL80211_ATTR_REQ_IE,
+ NL80211_ATTR_RESP_IE,
+
+ NL80211_ATTR_PREV_BSSID,
+
+ NL80211_ATTR_KEY,
+ NL80211_ATTR_KEYS,
+
+ NL80211_ATTR_PID,
+
+ NL80211_ATTR_4ADDR,
+
+ NL80211_ATTR_SURVEY_INFO,
+
+ NL80211_ATTR_PMKID,
+ NL80211_ATTR_MAX_NUM_PMKIDS,
+
+ NL80211_ATTR_DURATION,
+
+ NL80211_ATTR_COOKIE,
+
+ NL80211_ATTR_WIPHY_COVERAGE_CLASS,
+
+ NL80211_ATTR_TX_RATES,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1
};
+/* source-level API compatibility */
+#define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION
+
/*
* Allow user space programs to use #ifdef on new attributes by defining them
* here
*/
+#define NL80211_CMD_CONNECT NL80211_CMD_CONNECT
#define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY
#define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES
#define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS
#define NL80211_ATTR_SSID NL80211_ATTR_SSID
#define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE
#define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE
+#define NL80211_ATTR_CIPHER_SUITES_PAIRWISE NL80211_ATTR_CIPHER_SUITES_PAIRWISE
+#define NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP
+#define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS
+#define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES
+#define NL80211_ATTR_KEY NL80211_ATTR_KEY
+#define NL80211_ATTR_KEYS NL80211_ATTR_KEYS
#define NL80211_MAX_SUPP_RATES 32
#define NL80211_MAX_SUPP_REG_RULES 32
#define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24
#define NL80211_HT_CAPABILITY_LEN 26
+#define NL80211_MAX_NR_CIPHER_SUITES 5
+#define NL80211_MAX_NR_AKM_SUITES 2
+
/**
* enum nl80211_iftype - (virtual) interface types
*
*
* @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active
* @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running
- * @NL80211_MPATH_FLAG_DSN_VALID: the mesh path contains a valid DSN
+ * @NL80211_MPATH_FLAG_SN_VALID: the mesh path contains a valid SN
* @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set
* @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded
*/
enum nl80211_mpath_flags {
NL80211_MPATH_FLAG_ACTIVE = 1<<0,
NL80211_MPATH_FLAG_RESOLVING = 1<<1,
- NL80211_MPATH_FLAG_DSN_VALID = 1<<2,
+ NL80211_MPATH_FLAG_SN_VALID = 1<<2,
NL80211_MPATH_FLAG_FIXED = 1<<3,
NL80211_MPATH_FLAG_RESOLVED = 1<<4,
};
*
* @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved
* @NL80211_ATTR_MPATH_FRAME_QLEN: number of queued frames for this destination
- * @NL80211_ATTR_MPATH_DSN: destination sequence number
+ * @NL80211_ATTR_MPATH_SN: destination sequence number
* @NL80211_ATTR_MPATH_METRIC: metric (cost) of this mesh path
* @NL80211_ATTR_MPATH_EXPTIME: expiration time for the path, in msec from now
* @NL80211_ATTR_MPATH_FLAGS: mesh path flags, enumerated in
enum nl80211_mpath_info {
__NL80211_MPATH_INFO_INVALID,
NL80211_MPATH_INFO_FRAME_QLEN,
- NL80211_MPATH_INFO_DSN,
+ NL80211_MPATH_INFO_SN,
NL80211_MPATH_INFO_METRIC,
NL80211_MPATH_INFO_EXPTIME,
NL80211_MPATH_INFO_FLAGS,
};
/**
+ * enum nl80211_survey_info - survey information
+ *
+ * These attribute types are used with %NL80211_ATTR_SURVEY_INFO
+ * when getting information about a survey.
+ *
+ * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved
+ * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel
+ * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm)
+ */
+enum nl80211_survey_info {
+ __NL80211_SURVEY_INFO_INVALID,
+ NL80211_SURVEY_INFO_FREQUENCY,
+ NL80211_SURVEY_INFO_NOISE,
+
+ /* keep last */
+ __NL80211_SURVEY_INFO_AFTER_LAST,
+ NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1
+};
+
+/**
* enum nl80211_mntr_flags - monitor configuration flags
*
* Monitor configuration flags.
* @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs)
* that it takes for an HWMP information element to propagate across the mesh
*
+ * @NL80211_MESHCONF_ROOTMODE: whether root mode is enabled or not
+ *
* @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
*
* @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT,
NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL,
NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
+ NL80211_MESHCONF_HWMP_ROOTMODE,
/* keep last */
__NL80211_MESHCONF_ATTR_AFTER_LAST,
* @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16)
* @NL80211_BSS_CAPABILITY: capability field (CPU order, u16)
* @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the
- * raw information elements from the probe response/beacon (bin)
+ * raw information elements from the probe response/beacon (bin);
+ * if the %NL80211_BSS_BEACON_IES attribute is present, the IEs here are
+ * from a Probe Response frame; otherwise they are from a Beacon frame.
+ * However, if the driver does not indicate the source of the IEs, these
+ * IEs may be from either frame subtype.
* @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon
* in mBm (100 * dBm) (s32)
* @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon
* in unspecified units, scaled to 0..100 (u8)
+ * @NL80211_BSS_STATUS: status, if this BSS is "used"
+ * @NL80211_BSS_SEEN_MS_AGO: age of this BSS entry in ms
+ * @NL80211_BSS_BEACON_IES: binary attribute containing the raw information
+ * elements from a Beacon frame (bin); not present if no Beacon frame has
+ * yet been received
* @__NL80211_BSS_AFTER_LAST: internal
* @NL80211_BSS_MAX: highest BSS attribute
*/
NL80211_BSS_INFORMATION_ELEMENTS,
NL80211_BSS_SIGNAL_MBM,
NL80211_BSS_SIGNAL_UNSPEC,
+ NL80211_BSS_STATUS,
+ NL80211_BSS_SEEN_MS_AGO,
+ NL80211_BSS_BEACON_IES,
/* keep last */
__NL80211_BSS_AFTER_LAST,
};
/**
+ * enum nl80211_bss_status - BSS "status"
+ */
+enum nl80211_bss_status {
+ NL80211_BSS_STATUS_AUTHENTICATED,
+ NL80211_BSS_STATUS_ASSOCIATED,
+ NL80211_BSS_STATUS_IBSS_JOINED,
+};
+
+/**
* enum nl80211_auth_type - AuthenticationType
*
* @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication
* @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only)
* @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r)
* @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP)
+ * @__NL80211_AUTHTYPE_NUM: internal
+ * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm
+ * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by
+ * trying multiple times); this is invalid in netlink -- leave out
+ * the attribute for this on CONNECT commands.
*/
enum nl80211_auth_type {
NL80211_AUTHTYPE_OPEN_SYSTEM,
NL80211_AUTHTYPE_SHARED_KEY,
NL80211_AUTHTYPE_FT,
NL80211_AUTHTYPE_NETWORK_EAP,
+
+ /* keep last */
+ __NL80211_AUTHTYPE_NUM,
+ NL80211_AUTHTYPE_MAX = __NL80211_AUTHTYPE_NUM - 1,
+ NL80211_AUTHTYPE_AUTOMATIC
};
/**
NL80211_MFP_REQUIRED,
};
+enum nl80211_wpa_versions {
+ NL80211_WPA_VERSION_1 = 1 << 0,
+ NL80211_WPA_VERSION_2 = 1 << 1,
+};
+
+/**
+ * enum nl80211_key_attributes - key attributes
+ * @__NL80211_KEY_INVALID: invalid
+ * @NL80211_KEY_DATA: (temporal) key data; for TKIP this consists of
+ * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC
+ * keys
+ * @NL80211_KEY_IDX: key ID (u8, 0-3)
+ * @NL80211_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11
+ * section 7.3.2.25.1, e.g. 0x000FAC04)
+ * @NL80211_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
+ * CCMP keys, each six bytes in little endian
+ * @NL80211_KEY_DEFAULT: flag indicating default key
+ * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key
+ * @__NL80211_KEY_AFTER_LAST: internal
+ * @NL80211_KEY_MAX: highest key attribute
+ */
+enum nl80211_key_attributes {
+ __NL80211_KEY_INVALID,
+ NL80211_KEY_DATA,
+ NL80211_KEY_IDX,
+ NL80211_KEY_CIPHER,
+ NL80211_KEY_SEQ,
+ NL80211_KEY_DEFAULT,
+ NL80211_KEY_DEFAULT_MGMT,
+
+ /* keep last */
+ __NL80211_KEY_AFTER_LAST,
+ NL80211_KEY_MAX = __NL80211_KEY_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_tx_rate_attributes - TX rate set attributes
+ * @__NL80211_TXRATE_INVALID: invalid
+ * @NL80211_TXRATE_LEGACY: Legacy (non-MCS) rates allowed for TX rate selection
+ * in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with
+ * 1 = 500 kbps) but without the IE length restriction (at most
+ * %NL80211_MAX_SUPP_RATES in a single array).
+ * @__NL80211_TXRATE_AFTER_LAST: internal
+ * @NL80211_TXRATE_MAX: highest TX rate attribute
+ */
+enum nl80211_tx_rate_attributes {
+ __NL80211_TXRATE_INVALID,
+ NL80211_TXRATE_LEGACY,
+
+ /* keep last */
+ __NL80211_TXRATE_AFTER_LAST,
+ NL80211_TXRATE_MAX = __NL80211_TXRATE_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_band - Frequency band
+ * @NL80211_BAND_2GHZ - 2.4 GHz ISM band
+ * @NL80211_BAND_5GHZ - around 5 GHz band (4.9 - 5.7 GHz)
+ */
+enum nl80211_band {
+ NL80211_BAND_2GHZ,
+ NL80211_BAND_5GHZ,
+};
+
#endif /* __LINUX_NL80211_H */