ATA_DFLAG_PIO = (1 << 8), /* device limited to PIO mode */
ATA_DFLAG_NCQ_OFF = (1 << 9), /* device limited to non-NCQ mode */
- ATA_DFLAG_SUSPENDED = (1 << 10), /* device suspended */
+ ATA_DFLAG_SPUNDOWN = (1 << 10), /* XXX: for spindown_compat */
ATA_DFLAG_INIT_MASK = (1 << 16) - 1,
ATA_DFLAG_DETACH = (1 << 16),
ATA_FLAG_SETXFER_POLLING= (1 << 14), /* use polling for SETXFER */
ATA_FLAG_IGN_SIMPLEX = (1 << 15), /* ignore SIMPLEX */
ATA_FLAG_NO_IORDY = (1 << 16), /* controller lacks iordy */
+ ATA_FLAG_ACPI_SATA = (1 << 17), /* need native SATA ACPI layout */
/* The following flag belongs to ap->pflags but is kept in
* ap->flags because it's referenced in many LLDs and will be
ATA_PFLAG_LOADING = (1 << 4), /* boot/loading probe */
ATA_PFLAG_UNLOADING = (1 << 5), /* module is unloading */
ATA_PFLAG_SCSI_HOTPLUG = (1 << 6), /* SCSI hotplug scheduled */
+ ATA_PFLAG_INITIALIZING = (1 << 7), /* being initialized, don't touch */
ATA_PFLAG_FLUSH_PORT_TASK = (1 << 16), /* flush port task */
ATA_PFLAG_SUSPENDED = (1 << 17), /* port is suspended (power) */
/* host set flags */
ATA_HOST_SIMPLEX = (1 << 0), /* Host is simplex, one DMA channel per host only */
+ ATA_HOST_STARTED = (1 << 1), /* Host started */
/* various lengths of time */
ATA_TMOUT_BOOT = 30 * HZ, /* heuristic */
ATA_DMA_PAD_SZ = 4,
ATA_DMA_PAD_BUF_SZ = ATA_DMA_PAD_SZ * ATA_MAX_QUEUE,
- /* masks for port functions */
- ATA_PORT_PRIMARY = (1 << 0),
- ATA_PORT_SECONDARY = (1 << 1),
-
/* ering size */
ATA_ERING_SIZE = 32,
ATA_EH_REVALIDATE = (1 << 0),
ATA_EH_SOFTRESET = (1 << 1),
ATA_EH_HARDRESET = (1 << 2),
- ATA_EH_SUSPEND = (1 << 3),
- ATA_EH_RESUME = (1 << 4),
- ATA_EH_PM_FREEZE = (1 << 5),
ATA_EH_RESET_MASK = ATA_EH_SOFTRESET | ATA_EH_HARDRESET,
- ATA_EH_PERDEV_MASK = ATA_EH_REVALIDATE | ATA_EH_SUSPEND |
- ATA_EH_RESUME | ATA_EH_PM_FREEZE,
+ ATA_EH_PERDEV_MASK = ATA_EH_REVALIDATE,
/* ata_eh_info->flags */
ATA_EHI_HOTPLUGGED = (1 << 0), /* could have been hotplugged */
ATA_EHI_NO_AUTOPSY = (1 << 2), /* no autopsy */
ATA_EHI_QUIET = (1 << 3), /* be quiet */
- ATA_EHI_DID_RESET = (1 << 16), /* already reset this port */
- ATA_EHI_PRINTINFO = (1 << 17), /* print configuration info */
- ATA_EHI_SETMODE = (1 << 18), /* configure transfer mode */
- ATA_EHI_POST_SETMODE = (1 << 19), /* revaildating after setmode */
+ ATA_EHI_DID_SOFTRESET = (1 << 16), /* already soft-reset this port */
+ ATA_EHI_DID_HARDRESET = (1 << 17), /* already soft-reset this port */
+ ATA_EHI_PRINTINFO = (1 << 18), /* print configuration info */
+ ATA_EHI_SETMODE = (1 << 19), /* configure transfer mode */
+ ATA_EHI_POST_SETMODE = (1 << 20), /* revaildating after setmode */
+ ATA_EHI_DID_RESET = ATA_EHI_DID_SOFTRESET | ATA_EHI_DID_HARDRESET,
ATA_EHI_RESET_MODIFIER_MASK = ATA_EHI_RESUME_LINK,
/* max repeat if error condition is still set after ->error_handler */
/* how hard are we gonna try to probe/recover devices */
ATA_PROBE_MAX_TRIES = 3,
- ATA_EH_RESET_TRIES = 3,
ATA_EH_DEV_TRIES = 3,
- /* Drive spinup time (time from power-on to the first D2H FIS)
- * in msecs - 8s currently. Failing to get ready in this time
- * isn't critical. It will result in reset failure for
- * controllers which can't wait for the first D2H FIS. libata
- * will retry, so it just has to be long enough to spin up
- * most devices.
- */
- ATA_SPINUP_WAIT = 8000,
-
/* Horkage types. May be set by libata or controller on drives
(some horkage may be drive/controller pair dependant */
/* typedefs */
typedef void (*ata_qc_cb_t) (struct ata_queued_cmd *qc);
-typedef int (*ata_prereset_fn_t)(struct ata_port *ap);
-typedef int (*ata_reset_fn_t)(struct ata_port *ap, unsigned int *classes);
+typedef int (*ata_prereset_fn_t)(struct ata_port *ap, unsigned long deadline);
+typedef int (*ata_reset_fn_t)(struct ata_port *ap, unsigned int *classes,
+ unsigned long deadline);
typedef void (*ata_postreset_fn_t)(struct ata_port *ap, unsigned int *classes);
struct ata_ioports {
void __iomem *scr_addr;
};
-struct ata_probe_ent {
- struct list_head node;
- struct device *dev;
- const struct ata_port_operations *port_ops;
- struct scsi_host_template *sht;
- struct ata_ioports port[ATA_MAX_PORTS];
- unsigned int n_ports;
- unsigned int dummy_port_mask;
- unsigned int pio_mask;
- unsigned int mwdma_mask;
- unsigned int udma_mask;
- unsigned long irq;
- unsigned long irq2;
- unsigned int irq_flags;
- unsigned long port_flags;
- unsigned long _host_flags;
- void __iomem * const *iomap;
- void *private_data;
-
- /* port_info for the secondary port. Together with irq2, it's
- * used to implement non-uniform secondary port. Currently,
- * the only user is ata_piix combined mode. This workaround
- * will be removed together with ata_probe_ent when init model
- * is updated.
- */
- const struct ata_port_info *pinfo2;
-};
-
struct ata_host {
spinlock_t lock;
struct device *dev;
int dma_dir;
unsigned int pad_len;
+ unsigned int sect_size;
unsigned int nbytes;
unsigned int curbytes;
struct ata_ering ering;
int spdn_cnt;
unsigned int horkage; /* List of broken features */
-#ifdef CONFIG_SATA_ACPI
+#ifdef CONFIG_ATA_ACPI
/* ACPI objects info */
acpi_handle obj_handle;
#endif
unsigned int dev_action[ATA_MAX_DEVICES]; /* dev EH action */
unsigned int flags; /* ATA_EHI_* flags */
- unsigned long hotplug_timestamp;
unsigned int probe_mask;
char desc[ATA_EH_DESC_LEN];
void (*phy_reset) (struct ata_port *ap); /* obsolete */
int (*set_mode) (struct ata_port *ap, struct ata_device **r_failed_dev);
- void (*post_set_mode) (struct ata_port *ap);
-
int (*cable_detect) (struct ata_port *ap);
int (*check_atapi_dma) (struct ata_queued_cmd *qc);
unsigned long mwdma_mask;
unsigned long udma_mask;
const struct ata_port_operations *port_ops;
+ irq_handler_t irq_handler;
void *private_data;
};
extern const unsigned long sata_deb_timing_long[];
extern const struct ata_port_operations ata_dummy_port_ops;
+extern const struct ata_port_info ata_dummy_port_info;
static inline const unsigned long *
sata_ehc_deb_timing(struct ata_eh_context *ehc)
extern void sata_phy_reset(struct ata_port *ap);
extern void ata_bus_reset(struct ata_port *ap);
extern int sata_set_spd(struct ata_port *ap);
-extern int sata_phy_debounce(struct ata_port *ap, const unsigned long *param);
-extern int sata_phy_resume(struct ata_port *ap, const unsigned long *param);
-extern int ata_std_prereset(struct ata_port *ap);
-extern int ata_std_softreset(struct ata_port *ap, unsigned int *classes);
-extern int sata_port_hardreset(struct ata_port *ap,
- const unsigned long *timing);
-extern int sata_std_hardreset(struct ata_port *ap, unsigned int *class);
+extern int sata_phy_debounce(struct ata_port *ap, const unsigned long *param,
+ unsigned long deadline);
+extern int sata_phy_resume(struct ata_port *ap, const unsigned long *param,
+ unsigned long deadline);
+extern int ata_std_prereset(struct ata_port *ap, unsigned long deadline);
+extern int ata_std_softreset(struct ata_port *ap, unsigned int *classes,
+ unsigned long deadline);
+extern int sata_port_hardreset(struct ata_port *ap, const unsigned long *timing,
+ unsigned long deadline);
+extern int sata_std_hardreset(struct ata_port *ap, unsigned int *class,
+ unsigned long deadline);
extern void ata_std_postreset(struct ata_port *ap, unsigned int *classes);
extern void ata_port_disable(struct ata_port *);
extern void ata_std_ports(struct ata_ioports *ioaddr);
#ifdef CONFIG_PCI
-extern int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
- unsigned int n_ports);
+extern int ata_pci_init_one (struct pci_dev *pdev,
+ const struct ata_port_info * const * ppi);
extern void ata_pci_remove_one (struct pci_dev *pdev);
#ifdef CONFIG_PM
extern void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg);
#endif
extern int ata_pci_clear_simplex(struct pci_dev *pdev);
#endif /* CONFIG_PCI */
-extern int ata_device_add(const struct ata_probe_ent *ent);
+extern struct ata_host *ata_host_alloc(struct device *dev, int max_ports);
+extern struct ata_host *ata_host_alloc_pinfo(struct device *dev,
+ const struct ata_port_info * const * ppi, int n_ports);
+extern int ata_host_start(struct ata_host *host);
+extern int ata_host_register(struct ata_host *host,
+ struct scsi_host_template *sht);
+extern int ata_host_activate(struct ata_host *host, int irq,
+ irq_handler_t irq_handler, unsigned long irq_flags,
+ struct scsi_host_template *sht);
extern void ata_host_detach(struct ata_host *host);
extern void ata_host_init(struct ata_host *, struct device *,
unsigned long, const struct ata_port_operations *);
extern int ata_port_online(struct ata_port *ap);
extern int ata_port_offline(struct ata_port *ap);
#ifdef CONFIG_PM
-extern int ata_scsi_device_resume(struct scsi_device *);
-extern int ata_scsi_device_suspend(struct scsi_device *, pm_message_t mesg);
extern int ata_host_suspend(struct ata_host *host, pm_message_t mesg);
extern void ata_host_resume(struct ata_host *host);
#endif
extern int ata_ratelimit(void);
extern int ata_busy_sleep(struct ata_port *ap,
unsigned long timeout_pat, unsigned long timeout);
+extern int ata_wait_ready(struct ata_port *ap, unsigned long deadline);
extern void ata_port_queue_task(struct ata_port *ap, work_func_t fn,
void *data, unsigned long delay);
extern u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val,
unsigned long val;
};
-extern struct ata_probe_ent *
-ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int portmask);
+extern int ata_pci_init_native_host(struct ata_host *host);
+extern int ata_pci_init_bmdma(struct ata_host *host);
+extern int ata_pci_prepare_native_host(struct pci_dev *pdev,
+ const struct ata_port_info * const * ppi,
+ struct ata_host **r_host);
extern int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits);
extern unsigned long ata_pci_default_filter(struct ata_device *, unsigned long);
#endif /* CONFIG_PCI */
static inline void __ata_ehi_hotplugged(struct ata_eh_info *ehi)
{
- if (ehi->flags & ATA_EHI_HOTPLUGGED)
- return;
-
ehi->flags |= ATA_EHI_HOTPLUGGED | ATA_EHI_RESUME_LINK;
- ehi->hotplug_timestamp = jiffies;
-
ehi->action |= ATA_EH_SOFTRESET;
ehi->probe_mask |= (1 << ATA_MAX_DEVICES) - 1;
}
return ata_class_absent(dev->class);
}
-static inline unsigned int ata_dev_ready(const struct ata_device *dev)
-{
- return ata_dev_enabled(dev) && !(dev->flags & ATA_DFLAG_SUSPENDED);
-}
-
/*
* port helpers
*/
qc->n_elem = 0;
qc->err_mask = 0;
qc->pad_len = 0;
+ qc->sect_size = ATA_SECT_SIZE;
ata_tf_init(qc->dev, &qc->tf);
static inline struct ata_port *ata_shost_to_port(struct Scsi_Host *host)
{
- return (struct ata_port *) &host->hostdata[0];
+ return *(struct ata_port **)&host->hostdata[0];
}
#endif /* __LINUX_LIBATA_H__ */
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff