/*
* 'kernel.h' contains some often-used function prototypes etc
*/
+#define __ALIGN_KERNEL(x, a) __ALIGN_KERNEL_MASK(x, (typeof(x))(a) - 1)
+#define __ALIGN_KERNEL_MASK(x, mask) (((x) + (mask)) & ~(mask))
#ifdef __KERNEL__
#include <linux/bitops.h>
#include <linux/log2.h>
#include <linux/typecheck.h>
-#include <linux/ratelimit.h>
#include <linux/dynamic_debug.h>
#include <asm/byteorder.h>
#include <asm/bug.h>
extern const char linux_banner[];
extern const char linux_proc_banner[];
-#define USHORT_MAX ((u16)(~0U))
-#define SHORT_MAX ((s16)(USHORT_MAX>>1))
-#define SHORT_MIN (-SHORT_MAX - 1)
+#define USHRT_MAX ((u16)(~0U))
+#define SHRT_MAX ((s16)(USHRT_MAX>>1))
+#define SHRT_MIN ((s16)(-SHRT_MAX - 1))
#define INT_MAX ((int)(~0U>>1))
#define INT_MIN (-INT_MAX - 1)
#define UINT_MAX (~0U)
#define STACK_MAGIC 0xdeadbeef
-#define ALIGN(x,a) __ALIGN_MASK(x,(typeof(x))(a)-1)
-#define __ALIGN_MASK(x,mask) (((x)+(mask))&~(mask))
+#define ALIGN(x, a) __ALIGN_KERNEL((x), (a))
+#define __ALIGN_MASK(x, mask) __ALIGN_KERNEL_MASK((x), (mask))
#define PTR_ALIGN(p, a) ((typeof(p))ALIGN((unsigned long)(p), (a)))
#define IS_ALIGNED(x, a) (((x) & ((typeof(x))(a) - 1)) == 0)
#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]) + __must_be_array(arr))
+/*
+ * This looks more complex than it should be. But we need to
+ * get the type for the ~ right in round_down (it needs to be
+ * as wide as the result!), and we want to evaluate the macro
+ * arguments just once each.
+ */
+#define __round_mask(x, y) ((__typeof__(x))((y)-1))
+#define round_up(x, y) ((((x)-1) | __round_mask(x, y))+1)
+#define round_down(x, y) ((x) & ~__round_mask(x, y))
+
#define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f))
#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
#define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y))
#define _RET_IP_ (unsigned long)__builtin_return_address(0)
#define _THIS_IP_ ({ __label__ __here; __here: (unsigned long)&&__here; })
-#ifdef CONFIG_LBD
+#ifdef CONFIG_LBDAF
# include <asm/div64.h>
# define sector_div(a, b) do_div(a, b)
#else
#define KERN_INFO "<6>" /* informational */
#define KERN_DEBUG "<7>" /* debug-level messages */
+/* Use the default kernel loglevel */
+#define KERN_DEFAULT "<d>"
/*
* Annotation for a "continued" line of log printout (only done after a
* line that had no enclosing \n). Only to be used by core/arch code
* during early bootup (a continued line is not SMP-safe otherwise).
*/
-#define KERN_CONT ""
+#define KERN_CONT "<c>"
extern int console_printk[];
#endif
#ifdef CONFIG_DEBUG_SPINLOCK_SLEEP
- void __might_sleep(char *file, int line);
+ void __might_sleep(const char *file, int line, int preempt_offset);
/**
* might_sleep - annotation for functions that can sleep
*
* supposed to.
*/
# define might_sleep() \
- do { __might_sleep(__FILE__, __LINE__); might_resched(); } while (0)
+ do { __might_sleep(__FILE__, __LINE__, 0); might_resched(); } while (0)
#else
+ static inline void __might_sleep(const char *file, int line,
+ int preempt_offset) { }
# define might_sleep() do { might_resched(); } while (0)
#endif
#define might_sleep_if(cond) do { if (cond) might_sleep(); } while (0)
#define abs(x) ({ \
- int __x = (x); \
+ long __x = (x); \
(__x < 0) ? -__x : __x; \
})
asmlinkage int printk(const char * fmt, ...)
__attribute__ ((format (printf, 1, 2))) __cold;
-extern struct ratelimit_state printk_ratelimit_state;
-extern int printk_ratelimit(void);
+extern int __printk_ratelimit(const char *func);
+#define printk_ratelimit() __printk_ratelimit(__func__)
extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
unsigned int interval_msec);
+
+extern int printk_delay_msec;
+
+/*
+ * Print a one-time message (analogous to WARN_ONCE() et al):
+ */
+#define printk_once(x...) ({ \
+ static bool __print_once; \
+ \
+ if (!__print_once) { \
+ __print_once = true; \
+ printk(x); \
+ } \
+})
+
+void log_buf_kexec_setup(void);
#else
static inline int vprintk(const char *s, va_list args)
__attribute__ ((format (printf, 1, 0)));
static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies, \
unsigned int interval_msec) \
{ return false; }
+
+/* No effect, but we still get type checking even in the !PRINTK case: */
+#define printk_once(x...) printk(x)
+
+static inline void log_buf_kexec_setup(void)
+{
+}
#endif
extern int printk_needs_cpu(int cpu);
extern int panic_timeout;
extern int panic_on_oops;
extern int panic_on_unrecovered_nmi;
+extern int panic_on_io_nmi;
extern const char *print_tainted(void);
extern void add_taint(unsigned flag);
extern int test_taint(unsigned flag);
#define TAINT_OVERRIDDEN_ACPI_TABLE 8
#define TAINT_WARN 9
#define TAINT_CRAP 10
+#define TAINT_FIRMWARE_WORKAROUND 11
extern void dump_stack(void) __cold;
return buf;
}
+extern int hex_to_bin(char ch);
+
#ifndef pr_fmt
#define pr_fmt(fmt) fmt
#endif
printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
#define pr_warning(fmt, ...) \
printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warn pr_warning
#define pr_notice(fmt, ...) \
printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
#define pr_info(fmt, ...) \
#define pr_cont(fmt, ...) \
printk(KERN_CONT fmt, ##__VA_ARGS__)
+/* pr_devel() should produce zero code unless DEBUG is defined */
+#ifdef DEBUG
+#define pr_devel(fmt, ...) \
+ printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#else
+#define pr_devel(fmt, ...) \
+ ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
+#endif
+
/* If you are writing a driver, please use dev_dbg instead */
#if defined(DEBUG)
#define pr_debug(fmt, ...) \
printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
#elif defined(CONFIG_DYNAMIC_DEBUG)
/* dynamic_pr_debug() uses pr_fmt() internally so we don't need it here */
-#define pr_debug(fmt, ...) do { \
- dynamic_pr_debug(fmt, ##__VA_ARGS__); \
- } while (0)
+#define pr_debug(fmt, ...) \
+ dynamic_pr_debug(fmt, ##__VA_ARGS__)
#else
#define pr_debug(fmt, ...) \
({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
#endif
/*
+ * ratelimited messages with local ratelimit_state,
+ * no local ratelimit_state used in the !PRINTK case
+ */
+#ifdef CONFIG_PRINTK
+#define printk_ratelimited(fmt, ...) ({ \
+ static DEFINE_RATELIMIT_STATE(_rs, \
+ DEFAULT_RATELIMIT_INTERVAL, \
+ DEFAULT_RATELIMIT_BURST); \
+ \
+ if (__ratelimit(&_rs)) \
+ printk(fmt, ##__VA_ARGS__); \
+})
+#else
+/* No effect, but we still get type checking even in the !PRINTK case: */
+#define printk_ratelimited printk
+#endif
+
+#define pr_emerg_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_alert_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_crit_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_err_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warning_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warn_ratelimited pr_warning_ratelimited
+#define pr_notice_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_info_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
+/* no pr_cont_ratelimited, don't do that... */
+/* If you are writing a driver, please use dev_dbg instead */
+#if defined(DEBUG)
+#define pr_debug_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#else
+#define pr_debug_ratelimited(fmt, ...) \
+ ({ if (0) printk_ratelimited(KERN_DEBUG pr_fmt(fmt), \
+ ##__VA_ARGS__); 0; })
+#endif
+
+/*
+ * General tracing related utility functions - trace_printk(),
+ * tracing_on/tracing_off and tracing_start()/tracing_stop
+ *
+ * Use tracing_on/tracing_off when you want to quickly turn on or off
+ * tracing. It simply enables or disables the recording of the trace events.
+ * This also corresponds to the user space /sys/kernel/debug/tracing/tracing_on
+ * file, which gives a means for the kernel and userspace to interact.
+ * Place a tracing_off() in the kernel where you want tracing to end.
+ * From user space, examine the trace, and then echo 1 > tracing_on
+ * to continue tracing.
+ *
+ * tracing_stop/tracing_start has slightly more overhead. It is used
+ * by things like suspend to ram where disabling the recording of the
+ * trace is not enough, but tracing must actually stop because things
+ * like calling smp_processor_id() may crash the system.
+ *
+ * Most likely, you want to use tracing_on/tracing_off.
+ */
+#ifdef CONFIG_RING_BUFFER
+void tracing_on(void);
+void tracing_off(void);
+/* trace_off_permanent stops recording with no way to bring it back */
+void tracing_off_permanent(void);
+int tracing_is_on(void);
+#else
+static inline void tracing_on(void) { }
+static inline void tracing_off(void) { }
+static inline void tracing_off_permanent(void) { }
+static inline int tracing_is_on(void) { return 0; }
+#endif
+
+enum ftrace_dump_mode {
+ DUMP_NONE,
+ DUMP_ALL,
+ DUMP_ORIG,
+};
+
+#ifdef CONFIG_TRACING
+extern void tracing_start(void);
+extern void tracing_stop(void);
+extern void ftrace_off_permanent(void);
+
+extern void
+ftrace_special(unsigned long arg1, unsigned long arg2, unsigned long arg3);
+
+static inline void __attribute__ ((format (printf, 1, 2)))
+____trace_printk_check_format(const char *fmt, ...)
+{
+}
+#define __trace_printk_check_format(fmt, args...) \
+do { \
+ if (0) \
+ ____trace_printk_check_format(fmt, ##args); \
+} while (0)
+
+/**
+ * trace_printk - printf formatting in the ftrace buffer
+ * @fmt: the printf format for printing
+ *
+ * Note: __trace_printk is an internal function for trace_printk and
+ * the @ip is passed in via the trace_printk macro.
+ *
+ * This function allows a kernel developer to debug fast path sections
+ * that printk is not appropriate for. By scattering in various
+ * printk like tracing in the code, a developer can quickly see
+ * where problems are occurring.
+ *
+ * This is intended as a debugging tool for the developer only.
+ * Please refrain from leaving trace_printks scattered around in
+ * your code.
+ */
+
+#define trace_printk(fmt, args...) \
+do { \
+ __trace_printk_check_format(fmt, ##args); \
+ if (__builtin_constant_p(fmt)) { \
+ static const char *trace_printk_fmt \
+ __attribute__((section("__trace_printk_fmt"))) = \
+ __builtin_constant_p(fmt) ? fmt : NULL; \
+ \
+ __trace_bprintk(_THIS_IP_, trace_printk_fmt, ##args); \
+ } else \
+ __trace_printk(_THIS_IP_, fmt, ##args); \
+} while (0)
+
+extern int
+__trace_bprintk(unsigned long ip, const char *fmt, ...)
+ __attribute__ ((format (printf, 2, 3)));
+
+extern int
+__trace_printk(unsigned long ip, const char *fmt, ...)
+ __attribute__ ((format (printf, 2, 3)));
+
+extern void trace_dump_stack(void);
+
+/*
+ * The double __builtin_constant_p is because gcc will give us an error
+ * if we try to allocate the static variable to fmt if it is not a
+ * constant. Even with the outer if statement.
+ */
+#define ftrace_vprintk(fmt, vargs) \
+do { \
+ if (__builtin_constant_p(fmt)) { \
+ static const char *trace_printk_fmt \
+ __attribute__((section("__trace_printk_fmt"))) = \
+ __builtin_constant_p(fmt) ? fmt : NULL; \
+ \
+ __ftrace_vbprintk(_THIS_IP_, trace_printk_fmt, vargs); \
+ } else \
+ __ftrace_vprintk(_THIS_IP_, fmt, vargs); \
+} while (0)
+
+extern int
+__ftrace_vbprintk(unsigned long ip, const char *fmt, va_list ap);
+
+extern int
+__ftrace_vprintk(unsigned long ip, const char *fmt, va_list ap);
+
+extern void ftrace_dump(enum ftrace_dump_mode oops_dump_mode);
+#else
+static inline void
+ftrace_special(unsigned long arg1, unsigned long arg2, unsigned long arg3) { }
+static inline int
+trace_printk(const char *fmt, ...) __attribute__ ((format (printf, 1, 2)));
+
+static inline void tracing_start(void) { }
+static inline void tracing_stop(void) { }
+static inline void ftrace_off_permanent(void) { }
+static inline void trace_dump_stack(void) { }
+static inline int
+trace_printk(const char *fmt, ...)
+{
+ return 0;
+}
+static inline int
+ftrace_vprintk(const char *fmt, va_list ap)
+{
+ return 0;
+}
+static inline void ftrace_dump(enum ftrace_dump_mode oops_dump_mode) { }
+#endif /* CONFIG_TRACING */
+
+/*
* Display an IP address in readable format.
*/
#endif /* __KERNEL__ */
+#ifndef __EXPORTED_HEADERS__
+#ifndef __KERNEL__
+#warning Attempt to use kernel headers from user space, see http://kernelnewbies.org/KernelHeaders
+#endif /* __KERNEL__ */
+#endif /* __EXPORTED_HEADERS__ */
+
#define SI_LOAD_SHIFT 16
struct sysinfo {
long uptime; /* Seconds since boot */
};
/* Force a compilation error if condition is true */
-#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
+#define BUILD_BUG_ON(condition) ((void)BUILD_BUG_ON_ZERO(condition))
+
+/* Force a compilation error if condition is constant and true */
+#define MAYBE_BUILD_BUG_ON(cond) ((void)sizeof(char[1 - 2 * !!(cond)]))
+
+/* Force a compilation error if a constant expression is not a power of 2 */
+#define BUILD_BUG_ON_NOT_POWER_OF_2(n) \
+ BUILD_BUG_ON((n) == 0 || (((n) & ((n) - 1)) != 0))
/* Force a compilation error if condition is true, but also produce a
result (of value 0 and type size_t), so the expression can be used
e.g. in a structure initializer (or where-ever else comma expressions
aren't permitted). */
-#define BUILD_BUG_ON_ZERO(e) (sizeof(char[1 - 2 * !!(e)]) - 1)
+#define BUILD_BUG_ON_ZERO(e) (sizeof(struct { int:-!!(e); }))
+#define BUILD_BUG_ON_NULL(e) ((void *)sizeof(struct { int:-!!(e); }))
/* Trap pasters of __FUNCTION__ at compile-time */
#define __FUNCTION__ (__func__)