ACPI: maintain a single list of _HID and _CID IDs

[safe/jmp/linux-2.6] / include / linux / jiffies.h

diff --git a/include/linux/jiffies.h b/include/linux/jiffies.h
index 9243cef..1a9cf78 100644 (file)
--- a/include/linux/jiffies.h
+++ b/include/linux/jiffies.h
@@ -1,7 +1,7 @@
 #ifndef _LINUX_JIFFIES_H
 #define _LINUX_JIFFIES_H
 
-#include <linux/calc64.h>
+#include <linux/math64.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/time.h>
@@ -29,16 +29,20 @@
 # define SHIFT_HZ      9
 #elif HZ >= 768 && HZ < 1536
 # define SHIFT_HZ      10
+#elif HZ >= 1536 && HZ < 3072
+# define SHIFT_HZ      11
+#elif HZ >= 3072 && HZ < 6144
+# define SHIFT_HZ      12
+#elif HZ >= 6144 && HZ < 12288
+# define SHIFT_HZ      13
 #else
-# error You lose.
+# error Invalid value of HZ.
 #endif
 
 /* LATCH is used in the interval timer and ftape setup. */
 #define LATCH  ((CLOCK_TICK_RATE + HZ/2) / HZ) /* For divider */
 
-#define LATCH_HPET ((HPET_TICK_RATE + HZ/2) / HZ)
-
-/* Suppose we want to devide two numbers NOM and DEN: NOM/DEN, the we can
+/* Suppose we want to devide two numbers NOM and DEN: NOM/DEN, then we can
  * improve accuracy by shifting LSH bits, hence calculating:
  *     (NOM << LSH) / DEN
  * This however means trouble for large NOM, because (NOM << LSH) may no
@@ -53,13 +57,9 @@
 /* HZ is the requested value. ACTHZ is actual HZ ("<< 8" is for accuracy) */
 #define ACTHZ (SH_DIV (CLOCK_TICK_RATE, LATCH, 8))
 
-#define ACTHZ_HPET (SH_DIV (HPET_TICK_RATE, LATCH_HPET, 8))
-
 /* TICK_NSEC is the time between ticks in nsec assuming real ACTHZ */
 #define TICK_NSEC (SH_DIV (1000000UL * 1000, ACTHZ, 8))
 
-#define TICK_NSEC_HPET (SH_DIV(1000000UL * 1000, ACTHZ_HPET, 8))
-
 /* TICK_USEC is the time between ticks in usec assuming fake USER_HZ */
 #define TICK_USEC ((1000000UL + USER_HZ/2) / USER_HZ)
 
@@ -115,6 +115,20 @@ static inline u64 get_jiffies_64(void)
         ((long)(a) - (long)(b) >= 0))
 #define time_before_eq(a,b)    time_after_eq(b,a)
 
+/*
+ * Calculate whether a is in the range of [b, c].
+ */
+#define time_in_range(a,b,c) \
+       (time_after_eq(a,b) && \
+        time_before_eq(a,c))
+
+/*
+ * Calculate whether a is in the range of [b, c).
+ */
+#define time_in_range_open(a,b,c) \
+       (time_after_eq(a,b) && \
+        time_before(a,c))
+
 /* Same as above, but does so with platform independent 64bit types.
  * These must be used when utilizing jiffies_64 (i.e. return value of
  * get_jiffies_64() */
@@ -131,6 +145,22 @@ static inline u64 get_jiffies_64(void)
 #define time_before_eq64(a,b)  time_after_eq64(b,a)
 
 /*
+ * These four macros compare jiffies and 'a' for convenience.
+ */
+
+/* time_is_before_jiffies(a) return true if a is before jiffies */
+#define time_is_before_jiffies(a) time_after(jiffies, a)
+
+/* time_is_after_jiffies(a) return true if a is after jiffies */
+#define time_is_after_jiffies(a) time_before(jiffies, a)
+
+/* time_is_before_eq_jiffies(a) return true if a is before or equal to jiffies*/
+#define time_is_before_eq_jiffies(a) time_after_eq(jiffies, a)
+
+/* time_is_after_eq_jiffies(a) return true if a is after or equal to jiffies*/
+#define time_is_after_eq_jiffies(a) time_before_eq(jiffies, a)
+
+/*
  * Have the 32 bit jiffies value wrap 5 minutes after boot
  * so jiffies wrap bugs show up earlier.
  */
@@ -142,19 +172,21 @@ static inline u64 get_jiffies_64(void)
  *
  * And some not so obvious.
  *
- * Note that we don't want to return MAX_LONG, because
+ * Note that we don't want to return LONG_MAX, because
  * for various timeout reasons we often end up having
  * to wait "jiffies+1" in order to guarantee that we wait
  * at _least_ "jiffies" - so "jiffies+1" had better still
  * be positive.
  */
-#define MAX_JIFFY_OFFSET ((~0UL >> 1)-1)
+#define MAX_JIFFY_OFFSET ((LONG_MAX >> 1)-1)
+
+extern unsigned long preset_lpj;
 
 /*
  * We want to do realistic conversions of time so we need to use the same
  * values the update wall clock code uses as the jiffies size.  This value
  * is: TICK_NSEC (which is defined in timex.h).  This
- * is a constant and is in nanoseconds.  We will used scaled math
+ * is a constant and is in nanoseconds.  We will use scaled math
  * with a set of scales defined here as SEC_JIFFIE_SC,  USEC_JIFFIE_SC and
  * NSEC_JIFFIE_SC.  Note that these defines contain nothing but
  * constants and so are computed at compile time.  SHIFT_HZ (computed in
@@ -198,7 +230,7 @@ static inline u64 get_jiffies_64(void)
  * operator if the result is a long long AND at least one of the
  * operands is cast to long long (usually just prior to the "*" so as
  * not to confuse it into thinking it really has a 64-bit operand,
- * which, buy the way, it can do, but it take more code and at least 2
+ * which, buy the way, it can do, but it takes more code and at least 2
  * mpys).
 
  * We also need to be aware that one second in nanoseconds is only a