tcp: MD5: Use MIB counter instead of warning for MD5 mismatch.
[safe/jmp/linux-2.6] / include / linux / interrupt.h
index e36e86c..62aa4f8 100644 (file)
@@ -11,7 +11,6 @@
 #include <linux/hardirq.h>
 #include <linux/sched.h>
 #include <linux/irqflags.h>
-#include <linux/bottom_half.h>
 #include <asm/atomic.h>
 #include <asm/ptrace.h>
 #include <asm/system.h>
  * IRQF_SHARED - allow sharing the irq among several devices
  * IRQF_PROBE_SHARED - set by callers when they expect sharing mismatches to occur
  * IRQF_TIMER - Flag to mark this interrupt as timer interrupt
+ * IRQF_PERCPU - Interrupt is per cpu
+ * IRQF_NOBALANCING - Flag to exclude this interrupt from irq balancing
+ * IRQF_IRQPOLL - Interrupt is used for polling (only the interrupt that is
+ *                registered first in an shared interrupt is considered for
+ *                performance reasons)
  */
 #define IRQF_DISABLED          0x00000020
 #define IRQF_SAMPLE_RANDOM     0x00000040
 #define IRQF_PROBE_SHARED      0x00000100
 #define IRQF_TIMER             0x00000200
 #define IRQF_PERCPU            0x00000400
-
-/*
- * Migration helpers. Scheduled for removal in 1/2007
- * Do not use for new code !
- */
-#define SA_INTERRUPT           IRQF_DISABLED
-#define SA_SAMPLE_RANDOM       IRQF_SAMPLE_RANDOM
-#define SA_SHIRQ               IRQF_SHARED
-#define SA_PROBEIRQ            IRQF_PROBE_SHARED
-#define SA_PERCPU              IRQF_PERCPU
-
-#define SA_TRIGGER_LOW         IRQF_TRIGGER_LOW
-#define SA_TRIGGER_HIGH                IRQF_TRIGGER_HIGH
-#define SA_TRIGGER_FALLING     IRQF_TRIGGER_FALLING
-#define SA_TRIGGER_RISING      IRQF_TRIGGER_RISING
-#define SA_TRIGGER_MASK                IRQF_TRIGGER_MASK
+#define IRQF_NOBALANCING       0x00000800
+#define IRQF_IRQPOLL           0x00001000
 
 typedef irqreturn_t (*irq_handler_t)(int, void *);
 
@@ -79,10 +69,17 @@ struct irqaction {
 };
 
 extern irqreturn_t no_action(int cpl, void *dev_id);
-extern int request_irq(unsigned int, irq_handler_t handler,
+extern int __must_check request_irq(unsigned int, irq_handler_t handler,
                       unsigned long, const char *, void *);
 extern void free_irq(unsigned int, void *);
 
+struct device;
+
+extern int __must_check devm_request_irq(struct device *dev, unsigned int irq,
+                           irq_handler_t handler, unsigned long irqflags,
+                           const char *devname, void *dev_id);
+extern void devm_free_irq(struct device *dev, unsigned int irq, void *dev_id);
+
 /*
  * On lockdep we dont want to enable hardirqs in hardirq
  * context. Use local_irq_enable_in_hardirq() to annotate
@@ -101,11 +98,35 @@ extern void free_irq(unsigned int, void *);
 # define local_irq_enable_in_hardirq() local_irq_enable()
 #endif
 
-#ifdef CONFIG_GENERIC_HARDIRQS
 extern void disable_irq_nosync(unsigned int irq);
 extern void disable_irq(unsigned int irq);
 extern void enable_irq(unsigned int irq);
 
+#if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS)
+
+extern cpumask_t irq_default_affinity;
+
+extern int irq_set_affinity(unsigned int irq, cpumask_t cpumask);
+extern int irq_can_set_affinity(unsigned int irq);
+extern int irq_select_affinity(unsigned int irq);
+
+#else /* CONFIG_SMP */
+
+static inline int irq_set_affinity(unsigned int irq, cpumask_t cpumask)
+{
+       return -EINVAL;
+}
+
+static inline int irq_can_set_affinity(unsigned int irq)
+{
+       return 0;
+}
+
+static inline int irq_select_affinity(unsigned int irq)  { return 0; }
+
+#endif /* CONFIG_SMP && CONFIG_GENERIC_HARDIRQS */
+
+#ifdef CONFIG_GENERIC_HARDIRQS
 /*
  * Special lockdep variants of irq disabling/enabling.
  * These should be used for locking constructs that
@@ -176,12 +197,25 @@ static inline int disable_irq_wake(unsigned int irq)
  * validator need to define the methods below in their asm/irq.h
  * files, under an #ifdef CONFIG_LOCKDEP section.
  */
-# ifndef CONFIG_LOCKDEP
+#ifndef CONFIG_LOCKDEP
 #  define disable_irq_nosync_lockdep(irq)      disable_irq_nosync(irq)
+#  define disable_irq_nosync_lockdep_irqsave(irq, flags) \
+                                               disable_irq_nosync(irq)
 #  define disable_irq_lockdep(irq)             disable_irq(irq)
 #  define enable_irq_lockdep(irq)              enable_irq(irq)
+#  define enable_irq_lockdep_irqrestore(irq, flags) \
+                                               enable_irq(irq)
 # endif
 
+static inline int enable_irq_wake(unsigned int irq)
+{
+       return 0;
+}
+
+static inline int disable_irq_wake(unsigned int irq)
+{
+       return 0;
+}
 #endif /* CONFIG_GENERIC_HARDIRQS */
 
 #ifndef __ARCH_SET_SOFTIRQ_PENDING
@@ -218,6 +252,16 @@ static inline void __deprecated save_and_cli(unsigned long *x)
 #define save_and_cli(x)        save_and_cli(&x)
 #endif /* CONFIG_SMP */
 
+/* Some architectures might implement lazy enabling/disabling of
+ * interrupts. In some cases, such as stop_machine, we might want
+ * to ensure that after a local_irq_disable(), interrupts have
+ * really been disabled in hardware. Such architectures need to
+ * implement the following hook.
+ */
+#ifndef hard_irq_disable
+#define hard_irq_disable()     do { } while(0)
+#endif
+
 /* PLEASE, avoid to allocate new softirqs, if you need not _really_ high
    frequency threaded job scheduling. For almost all the purposes
    tasklets are more than enough. F.e. all serial device BHs et
@@ -233,6 +277,10 @@ enum
        BLOCK_SOFTIRQ,
        TASKLET_SOFTIRQ,
        SCHED_SOFTIRQ,
+#ifdef CONFIG_HIGH_RES_TIMERS
+       HRTIMER_SOFTIRQ,
+#endif
+       RCU_SOFTIRQ,    /* Preferable RCU should always be the last softirq */
 };
 
 /* softirq mask and active fields moved to irq_cpustat_t in
@@ -242,15 +290,15 @@ enum
 struct softirq_action
 {
        void    (*action)(struct softirq_action *);
-       void    *data;
 };
 
 asmlinkage void do_softirq(void);
-extern void open_softirq(int nr, void (*action)(struct softirq_action*), void *data);
+asmlinkage void __do_softirq(void);
+extern void open_softirq(int nr, void (*action)(struct softirq_action *));
 extern void softirq_init(void);
 #define __raise_softirq_irqoff(nr) do { or_softirq_pending(1UL << (nr)); } while (0)
-extern void FASTCALL(raise_softirq_irqoff(unsigned int nr));
-extern void FASTCALL(raise_softirq(unsigned int nr));
+extern void raise_softirq_irqoff(unsigned int nr);
+extern void raise_softirq(unsigned int nr);
 
 
 /* Tasklets --- multithreaded analogue of BHs.
@@ -317,7 +365,7 @@ static inline void tasklet_unlock_wait(struct tasklet_struct *t)
 #define tasklet_unlock(t) do { } while (0)
 #endif
 
-extern void FASTCALL(__tasklet_schedule(struct tasklet_struct *t));
+extern void __tasklet_schedule(struct tasklet_struct *t);
 
 static inline void tasklet_schedule(struct tasklet_struct *t)
 {
@@ -325,7 +373,7 @@ static inline void tasklet_schedule(struct tasklet_struct *t)
                __tasklet_schedule(t);
 }
 
-extern void FASTCALL(__tasklet_hi_schedule(struct tasklet_struct *t));
+extern void __tasklet_hi_schedule(struct tasklet_struct *t);
 
 static inline void tasklet_hi_schedule(struct tasklet_struct *t)
 {
@@ -411,4 +459,15 @@ extern int probe_irq_off(unsigned long);   /* returns 0 or negative on failure */
 extern unsigned int probe_irq_mask(unsigned long);     /* returns mask of ISA interrupts */
 #endif
 
+#ifdef CONFIG_PROC_FS
+/* Initialize /proc/irq/ */
+extern void init_irq_proc(void);
+#else
+static inline void init_irq_proc(void)
+{
+}
+#endif
+
+int show_interrupts(struct seq_file *p, void *v);
+
 #endif