#include <sys/time.h>
#include <sys/ioctl.h>
#include <sys/types.h>
-#include <asm/types.h>
+#include <linux/types.h>
#endif
/*
__s32 maximum;
__s32 fuzz;
__s32 flat;
+ __s32 resolution;
};
#define EVIOCGVERSION _IOR('E', 0x01, int) /* get driver version */
#define EVIOCGID _IOR('E', 0x02, struct input_id) /* get device ID */
-#define EVIOCGREP _IOR('E', 0x03, int[2]) /* get repeat settings */
-#define EVIOCSREP _IOW('E', 0x03, int[2]) /* set repeat settings */
-#define EVIOCGKEYCODE _IOR('E', 0x04, int[2]) /* get keycode */
-#define EVIOCSKEYCODE _IOW('E', 0x04, int[2]) /* set keycode */
+#define EVIOCGREP _IOR('E', 0x03, unsigned int[2]) /* get repeat settings */
+#define EVIOCSREP _IOW('E', 0x03, unsigned int[2]) /* set repeat settings */
+#define EVIOCGKEYCODE _IOR('E', 0x04, unsigned int[2]) /* get keycode */
+#define EVIOCSKEYCODE _IOW('E', 0x04, unsigned int[2]) /* set keycode */
#define EVIOCGNAME(len) _IOC(_IOC_READ, 'E', 0x06, len) /* get device name */
#define EVIOCGPHYS(len) _IOC(_IOC_READ, 'E', 0x07, len) /* get physical location */
#define EV_PWR 0x16
#define EV_FF_STATUS 0x17
#define EV_MAX 0x1f
+#define EV_CNT (EV_MAX+1)
/*
* Synchronization events.
#define SYN_REPORT 0
#define SYN_CONFIG 1
+#define SYN_MT_REPORT 2
/*
* Keys and buttons
+ *
+ * Most of the keys/buttons are modeled after USB HUT 1.12
+ * (see http://www.usb.org/developers/hidpage).
+ * Abbreviations in the comments:
+ * AC - Application Control
+ * AL - Application Launch Button
+ * SC - System Control
*/
#define KEY_RESERVED 0
#define KEY_MUTE 113
#define KEY_VOLUMEDOWN 114
#define KEY_VOLUMEUP 115
-#define KEY_POWER 116
+#define KEY_POWER 116 /* SC System Power Down */
#define KEY_KPEQUAL 117
#define KEY_KPPLUSMINUS 118
#define KEY_PAUSE 119
+#define KEY_SCALE 120 /* AL Compiz Scale (Expose) */
#define KEY_KPCOMMA 121
#define KEY_HANGEUL 122
#define KEY_RIGHTMETA 126
#define KEY_COMPOSE 127
-#define KEY_STOP 128
+#define KEY_STOP 128 /* AC Stop */
#define KEY_AGAIN 129
-#define KEY_PROPS 130
-#define KEY_UNDO 131
+#define KEY_PROPS 130 /* AC Properties */
+#define KEY_UNDO 131 /* AC Undo */
#define KEY_FRONT 132
-#define KEY_COPY 133
-#define KEY_OPEN 134
-#define KEY_PASTE 135
-#define KEY_FIND 136
-#define KEY_CUT 137
-#define KEY_HELP 138
-#define KEY_MENU 139
-#define KEY_CALC 140
+#define KEY_COPY 133 /* AC Copy */
+#define KEY_OPEN 134 /* AC Open */
+#define KEY_PASTE 135 /* AC Paste */
+#define KEY_FIND 136 /* AC Search */
+#define KEY_CUT 137 /* AC Cut */
+#define KEY_HELP 138 /* AL Integrated Help Center */
+#define KEY_MENU 139 /* Menu (show menu) */
+#define KEY_CALC 140 /* AL Calculator */
#define KEY_SETUP 141
-#define KEY_SLEEP 142
-#define KEY_WAKEUP 143
-#define KEY_FILE 144
+#define KEY_SLEEP 142 /* SC System Sleep */
+#define KEY_WAKEUP 143 /* System Wake Up */
+#define KEY_FILE 144 /* AL Local Machine Browser */
#define KEY_SENDFILE 145
#define KEY_DELETEFILE 146
#define KEY_XFER 147
#define KEY_PROG1 148
#define KEY_PROG2 149
-#define KEY_WWW 150
+#define KEY_WWW 150 /* AL Internet Browser */
#define KEY_MSDOS 151
-#define KEY_COFFEE 152
+#define KEY_COFFEE 152 /* AL Terminal Lock/Screensaver */
+#define KEY_SCREENLOCK KEY_COFFEE
#define KEY_DIRECTION 153
#define KEY_CYCLEWINDOWS 154
#define KEY_MAIL 155
-#define KEY_BOOKMARKS 156
+#define KEY_BOOKMARKS 156 /* AC Bookmarks */
#define KEY_COMPUTER 157
-#define KEY_BACK 158
-#define KEY_FORWARD 159
+#define KEY_BACK 158 /* AC Back */
+#define KEY_FORWARD 159 /* AC Forward */
#define KEY_CLOSECD 160
#define KEY_EJECTCD 161
#define KEY_EJECTCLOSECD 162
#define KEY_STOPCD 166
#define KEY_RECORD 167
#define KEY_REWIND 168
-#define KEY_PHONE 169
+#define KEY_PHONE 169 /* Media Select Telephone */
#define KEY_ISO 170
-#define KEY_CONFIG 171
-#define KEY_HOMEPAGE 172
-#define KEY_REFRESH 173
-#define KEY_EXIT 174
+#define KEY_CONFIG 171 /* AL Consumer Control Configuration */
+#define KEY_HOMEPAGE 172 /* AC Home */
+#define KEY_REFRESH 173 /* AC Refresh */
+#define KEY_EXIT 174 /* AC Exit */
#define KEY_MOVE 175
#define KEY_EDIT 176
#define KEY_SCROLLUP 177
#define KEY_SCROLLDOWN 178
#define KEY_KPLEFTPAREN 179
#define KEY_KPRIGHTPAREN 180
-#define KEY_NEW 181
-#define KEY_REDO 182
+#define KEY_NEW 181 /* AC New */
+#define KEY_REDO 182 /* AC Redo/Repeat */
#define KEY_F13 183
#define KEY_F14 184
#define KEY_PAUSECD 201
#define KEY_PROG3 202
#define KEY_PROG4 203
+#define KEY_DASHBOARD 204 /* AL Dashboard */
#define KEY_SUSPEND 205
-#define KEY_CLOSE 206
+#define KEY_CLOSE 206 /* AC Close */
#define KEY_PLAY 207
#define KEY_FASTFORWARD 208
#define KEY_BASSBOOST 209
-#define KEY_PRINT 210
+#define KEY_PRINT 210 /* AC Print */
#define KEY_HP 211
#define KEY_CAMERA 212
#define KEY_SOUND 213
#define KEY_CHAT 216
#define KEY_SEARCH 217
#define KEY_CONNECT 218
-#define KEY_FINANCE 219
+#define KEY_FINANCE 219 /* AL Checkbook/Finance */
#define KEY_SPORT 220
#define KEY_SHOP 221
#define KEY_ALTERASE 222
-#define KEY_CANCEL 223
+#define KEY_CANCEL 223 /* AC Cancel */
#define KEY_BRIGHTNESSDOWN 224
#define KEY_BRIGHTNESSUP 225
#define KEY_MEDIA 226
-#define KEY_SWITCHVIDEOMODE 227
+#define KEY_SWITCHVIDEOMODE 227 /* Cycle between available video
+ outputs (Monitor/LCD/TV-out/etc) */
#define KEY_KBDILLUMTOGGLE 228
#define KEY_KBDILLUMDOWN 229
#define KEY_KBDILLUMUP 230
-#define KEY_SEND 231
-#define KEY_REPLY 232
-#define KEY_FORWARDMAIL 233
-#define KEY_SAVE 234
+#define KEY_SEND 231 /* AC Send */
+#define KEY_REPLY 232 /* AC Reply */
+#define KEY_FORWARDMAIL 233 /* AC Forward Msg */
+#define KEY_SAVE 234 /* AC Save */
#define KEY_DOCUMENTS 235
#define KEY_BATTERY 236
#define KEY_BLUETOOTH 237
#define KEY_WLAN 238
+#define KEY_UWB 239
#define KEY_UNKNOWN 240
+#define KEY_VIDEO_NEXT 241 /* drive next video source */
+#define KEY_VIDEO_PREV 242 /* drive previous video source */
+#define KEY_BRIGHTNESS_CYCLE 243 /* brightness up, after max is min */
+#define KEY_BRIGHTNESS_ZERO 244 /* brightness off, use ambient */
+#define KEY_DISPLAY_OFF 245 /* display device to off state */
+
+#define KEY_WIMAX 246
+#define KEY_RFKILL 247 /* Key that controls all radios */
+
+/* Code 255 is reserved for special needs of AT keyboard driver */
+
#define BTN_MISC 0x100
#define BTN_0 0x100
#define BTN_1 0x101
#define BTN_STYLUS2 0x14c
#define BTN_TOOL_DOUBLETAP 0x14d
#define BTN_TOOL_TRIPLETAP 0x14e
+#define BTN_TOOL_QUADTAP 0x14f /* Four fingers on trackpad */
#define BTN_WHEEL 0x150
#define BTN_GEAR_DOWN 0x150
#define KEY_CLEAR 0x163
#define KEY_POWER2 0x164
#define KEY_OPTION 0x165
-#define KEY_INFO 0x166
+#define KEY_INFO 0x166 /* AL OEM Features/Tips/Tutorial */
#define KEY_TIME 0x167
#define KEY_VENDOR 0x168
#define KEY_ARCHIVE 0x169
-#define KEY_PROGRAM 0x16a
+#define KEY_PROGRAM 0x16a /* Media Select Program Guide */
#define KEY_CHANNEL 0x16b
#define KEY_FAVORITES 0x16c
#define KEY_EPG 0x16d
-#define KEY_PVR 0x16e
+#define KEY_PVR 0x16e /* Media Select Home */
#define KEY_MHP 0x16f
#define KEY_LANGUAGE 0x170
#define KEY_TITLE 0x171
#define KEY_MODE 0x175
#define KEY_KEYBOARD 0x176
#define KEY_SCREEN 0x177
-#define KEY_PC 0x178
-#define KEY_TV 0x179
-#define KEY_TV2 0x17a
-#define KEY_VCR 0x17b
-#define KEY_VCR2 0x17c
-#define KEY_SAT 0x17d
+#define KEY_PC 0x178 /* Media Select Computer */
+#define KEY_TV 0x179 /* Media Select TV */
+#define KEY_TV2 0x17a /* Media Select Cable */
+#define KEY_VCR 0x17b /* Media Select VCR */
+#define KEY_VCR2 0x17c /* VCR Plus */
+#define KEY_SAT 0x17d /* Media Select Satellite */
#define KEY_SAT2 0x17e
-#define KEY_CD 0x17f
-#define KEY_TAPE 0x180
+#define KEY_CD 0x17f /* Media Select CD */
+#define KEY_TAPE 0x180 /* Media Select Tape */
#define KEY_RADIO 0x181
-#define KEY_TUNER 0x182
+#define KEY_TUNER 0x182 /* Media Select Tuner */
#define KEY_PLAYER 0x183
#define KEY_TEXT 0x184
-#define KEY_DVD 0x185
+#define KEY_DVD 0x185 /* Media Select DVD */
#define KEY_AUX 0x186
#define KEY_MP3 0x187
#define KEY_AUDIO 0x188
#define KEY_VIDEO 0x189
#define KEY_DIRECTORY 0x18a
#define KEY_LIST 0x18b
-#define KEY_MEMO 0x18c
+#define KEY_MEMO 0x18c /* Media Select Messages */
#define KEY_CALENDAR 0x18d
#define KEY_RED 0x18e
#define KEY_GREEN 0x18f
#define KEY_YELLOW 0x190
#define KEY_BLUE 0x191
-#define KEY_CHANNELUP 0x192
-#define KEY_CHANNELDOWN 0x193
+#define KEY_CHANNELUP 0x192 /* Channel Increment */
+#define KEY_CHANNELDOWN 0x193 /* Channel Decrement */
#define KEY_FIRST 0x194
-#define KEY_LAST 0x195
+#define KEY_LAST 0x195 /* Recall Last */
#define KEY_AB 0x196
#define KEY_NEXT 0x197
#define KEY_RESTART 0x198
#define KEY_DIGITS 0x19d
#define KEY_TEEN 0x19e
#define KEY_TWEN 0x19f
-#define KEY_VIDEOPHONE 0x1a0
-#define KEY_GAMES 0x1a1
-#define KEY_ZOOMIN 0x1a2
-#define KEY_ZOOMOUT 0x1a3
-#define KEY_ZOOMRESET 0x1a4
-#define KEY_WORDPROCESSOR 0x1a5
-#define KEY_EDITOR 0x1a6
-#define KEY_SPREADSHEET 0x1a7
-#define KEY_GRAPHICSEDITOR 0x1a8
-#define KEY_PRESENTATION 0x1a9
-#define KEY_DATABASE 0x1aa
-#define KEY_NEWS 0x1ab
-#define KEY_VOICEMAIL 0x1ac
-#define KEY_ADDRESSBOOK 0x1ad
-#define KEY_MESSENGER 0x1ae
+#define KEY_VIDEOPHONE 0x1a0 /* Media Select Video Phone */
+#define KEY_GAMES 0x1a1 /* Media Select Games */
+#define KEY_ZOOMIN 0x1a2 /* AC Zoom In */
+#define KEY_ZOOMOUT 0x1a3 /* AC Zoom Out */
+#define KEY_ZOOMRESET 0x1a4 /* AC Zoom */
+#define KEY_WORDPROCESSOR 0x1a5 /* AL Word Processor */
+#define KEY_EDITOR 0x1a6 /* AL Text Editor */
+#define KEY_SPREADSHEET 0x1a7 /* AL Spreadsheet */
+#define KEY_GRAPHICSEDITOR 0x1a8 /* AL Graphics Editor */
+#define KEY_PRESENTATION 0x1a9 /* AL Presentation App */
+#define KEY_DATABASE 0x1aa /* AL Database App */
+#define KEY_NEWS 0x1ab /* AL Newsreader */
+#define KEY_VOICEMAIL 0x1ac /* AL Voicemail */
+#define KEY_ADDRESSBOOK 0x1ad /* AL Contacts/Address Book */
+#define KEY_MESSENGER 0x1ae /* AL Instant Messaging */
+#define KEY_DISPLAYTOGGLE 0x1af /* Turn display (LCD) on and off */
+#define KEY_SPELLCHECK 0x1b0 /* AL Spell Check */
+#define KEY_LOGOFF 0x1b1 /* AL Logoff */
+
+#define KEY_DOLLAR 0x1b2
+#define KEY_EURO 0x1b3
+
+#define KEY_FRAMEBACK 0x1b4 /* Consumer - transport controls */
+#define KEY_FRAMEFORWARD 0x1b5
+#define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */
+#define KEY_MEDIA_REPEAT 0x1b7 /* Consumer - transport control */
#define KEY_DEL_EOL 0x1c0
#define KEY_DEL_EOS 0x1c1
#define KEY_BRL_DOT6 0x1f6
#define KEY_BRL_DOT7 0x1f7
#define KEY_BRL_DOT8 0x1f8
+#define KEY_BRL_DOT9 0x1f9
+#define KEY_BRL_DOT10 0x1fa
+
+#define KEY_NUMERIC_0 0x200 /* used by phones, remote controls, */
+#define KEY_NUMERIC_1 0x201 /* and other keypads */
+#define KEY_NUMERIC_2 0x202
+#define KEY_NUMERIC_3 0x203
+#define KEY_NUMERIC_4 0x204
+#define KEY_NUMERIC_5 0x205
+#define KEY_NUMERIC_6 0x206
+#define KEY_NUMERIC_7 0x207
+#define KEY_NUMERIC_8 0x208
+#define KEY_NUMERIC_9 0x209
+#define KEY_NUMERIC_STAR 0x20a
+#define KEY_NUMERIC_POUND 0x20b
+
+#define KEY_CAMERA_FOCUS 0x210
+#define KEY_WPS_BUTTON 0x211 /* WiFi Protected Setup key */
+
+#define BTN_TRIGGER_HAPPY 0x2c0
+#define BTN_TRIGGER_HAPPY1 0x2c0
+#define BTN_TRIGGER_HAPPY2 0x2c1
+#define BTN_TRIGGER_HAPPY3 0x2c2
+#define BTN_TRIGGER_HAPPY4 0x2c3
+#define BTN_TRIGGER_HAPPY5 0x2c4
+#define BTN_TRIGGER_HAPPY6 0x2c5
+#define BTN_TRIGGER_HAPPY7 0x2c6
+#define BTN_TRIGGER_HAPPY8 0x2c7
+#define BTN_TRIGGER_HAPPY9 0x2c8
+#define BTN_TRIGGER_HAPPY10 0x2c9
+#define BTN_TRIGGER_HAPPY11 0x2ca
+#define BTN_TRIGGER_HAPPY12 0x2cb
+#define BTN_TRIGGER_HAPPY13 0x2cc
+#define BTN_TRIGGER_HAPPY14 0x2cd
+#define BTN_TRIGGER_HAPPY15 0x2ce
+#define BTN_TRIGGER_HAPPY16 0x2cf
+#define BTN_TRIGGER_HAPPY17 0x2d0
+#define BTN_TRIGGER_HAPPY18 0x2d1
+#define BTN_TRIGGER_HAPPY19 0x2d2
+#define BTN_TRIGGER_HAPPY20 0x2d3
+#define BTN_TRIGGER_HAPPY21 0x2d4
+#define BTN_TRIGGER_HAPPY22 0x2d5
+#define BTN_TRIGGER_HAPPY23 0x2d6
+#define BTN_TRIGGER_HAPPY24 0x2d7
+#define BTN_TRIGGER_HAPPY25 0x2d8
+#define BTN_TRIGGER_HAPPY26 0x2d9
+#define BTN_TRIGGER_HAPPY27 0x2da
+#define BTN_TRIGGER_HAPPY28 0x2db
+#define BTN_TRIGGER_HAPPY29 0x2dc
+#define BTN_TRIGGER_HAPPY30 0x2dd
+#define BTN_TRIGGER_HAPPY31 0x2de
+#define BTN_TRIGGER_HAPPY32 0x2df
+#define BTN_TRIGGER_HAPPY33 0x2e0
+#define BTN_TRIGGER_HAPPY34 0x2e1
+#define BTN_TRIGGER_HAPPY35 0x2e2
+#define BTN_TRIGGER_HAPPY36 0x2e3
+#define BTN_TRIGGER_HAPPY37 0x2e4
+#define BTN_TRIGGER_HAPPY38 0x2e5
+#define BTN_TRIGGER_HAPPY39 0x2e6
+#define BTN_TRIGGER_HAPPY40 0x2e7
/* We avoid low common keys in module aliases so they don't get huge. */
#define KEY_MIN_INTERESTING KEY_MUTE
-#define KEY_MAX 0x1ff
+#define KEY_MAX 0x2ff
+#define KEY_CNT (KEY_MAX+1)
/*
* Relative axes
#define REL_WHEEL 0x08
#define REL_MISC 0x09
#define REL_MAX 0x0f
+#define REL_CNT (REL_MAX+1)
/*
* Absolute axes
#define ABS_TOOL_WIDTH 0x1c
#define ABS_VOLUME 0x20
#define ABS_MISC 0x28
+
+#define ABS_MT_TOUCH_MAJOR 0x30 /* Major axis of touching ellipse */
+#define ABS_MT_TOUCH_MINOR 0x31 /* Minor axis (omit if circular) */
+#define ABS_MT_WIDTH_MAJOR 0x32 /* Major axis of approaching ellipse */
+#define ABS_MT_WIDTH_MINOR 0x33 /* Minor axis (omit if circular) */
+#define ABS_MT_ORIENTATION 0x34 /* Ellipse orientation */
+#define ABS_MT_POSITION_X 0x35 /* Center X ellipse position */
+#define ABS_MT_POSITION_Y 0x36 /* Center Y ellipse position */
+#define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */
+#define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */
+#define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */
+#define ABS_MT_PRESSURE 0x3a /* Pressure on contact area */
+
#define ABS_MAX 0x3f
+#define ABS_CNT (ABS_MAX+1)
/*
* Switch events
#define SW_LID 0x00 /* set = lid shut */
#define SW_TABLET_MODE 0x01 /* set = tablet mode */
#define SW_HEADPHONE_INSERT 0x02 /* set = inserted */
+#define SW_RFKILL_ALL 0x03 /* rfkill master switch, type "any"
+ set = radio enabled */
+#define SW_RADIO SW_RFKILL_ALL /* deprecated */
+#define SW_MICROPHONE_INSERT 0x04 /* set = inserted */
+#define SW_DOCK 0x05 /* set = plugged into dock */
+#define SW_LINEOUT_INSERT 0x06 /* set = inserted */
+#define SW_JACK_PHYSICAL_INSERT 0x07 /* set = mechanical switch set */
+#define SW_VIDEOOUT_INSERT 0x08 /* set = inserted */
+#define SW_CAMERA_LENS_COVER 0x09 /* set = lens covered */
+#define SW_KEYPAD_SLIDE 0x0a /* set = keypad slide out */
+#define SW_FRONT_PROXIMITY 0x0b /* set = front proximity sensor active */
#define SW_MAX 0x0f
+#define SW_CNT (SW_MAX+1)
/*
* Misc events
#define MSC_RAW 0x03
#define MSC_SCAN 0x04
#define MSC_MAX 0x07
+#define MSC_CNT (MSC_MAX+1)
/*
* LEDs
#define LED_MAIL 0x09
#define LED_CHARGING 0x0a
#define LED_MAX 0x0f
+#define LED_CNT (LED_MAX+1)
/*
* Autorepeat values
#define SND_BELL 0x01
#define SND_TONE 0x02
#define SND_MAX 0x07
+#define SND_CNT (SND_MAX+1)
/*
* IDs.
#define BUS_I2C 0x18
#define BUS_HOST 0x19
#define BUS_GSC 0x1A
+#define BUS_ATARI 0x1B
+
+/*
+ * MT_TOOL types
+ */
+#define MT_TOOL_FINGER 0
+#define MT_TOOL_PEN 1
/*
* Values describing the status of a force-feedback effect
struct ff_envelope envelope;
__u32 custom_len;
- __s16 *custom_data;
+ __s16 __user *custom_data;
};
/**
* defining effect parameters
*
* This structure is sent through ioctl from the application to the driver.
- * To create a new effect aplication should set its @id to -1; the kernel
+ * To create a new effect application should set its @id to -1; the kernel
* will return assigned @id which can later be used to update or delete
* this effect.
*
#define FF_AUTOCENTER 0x61
#define FF_MAX 0x7f
+#define FF_CNT (FF_MAX+1)
#ifdef __KERNEL__
#include <linux/timer.h>
#include <linux/mod_devicetable.h>
-#define NBITS(x) (((x)/BITS_PER_LONG)+1)
-#define BIT(x) (1UL<<((x)%BITS_PER_LONG))
-#define LONG(x) ((x)/BITS_PER_LONG)
-
-#define INPUT_KEYCODE(dev, scancode) ((dev->keycodesize == 1) ? ((u8*)dev->keycode)[scancode] : \
- ((dev->keycodesize == 2) ? ((u16*)dev->keycode)[scancode] : (((u32*)dev->keycode)[scancode])))
-
-#define SET_INPUT_KEYCODE(dev, scancode, val) \
- ({ unsigned __old; \
- switch (dev->keycodesize) { \
- case 1: { \
- u8 *k = (u8 *)dev->keycode; \
- __old = k[scancode]; \
- k[scancode] = val; \
- break; \
- } \
- case 2: { \
- u16 *k = (u16 *)dev->keycode; \
- __old = k[scancode]; \
- k[scancode] = val; \
- break; \
- } \
- default: { \
- u32 *k = (u32 *)dev->keycode; \
- __old = k[scancode]; \
- k[scancode] = val; \
- break; \
- } \
- } \
- __old; })
-
+/**
+ * struct input_dev - represents an input device
+ * @name: name of the device
+ * @phys: physical path to the device in the system hierarchy
+ * @uniq: unique identification code for the device (if device has it)
+ * @id: id of the device (struct input_id)
+ * @evbit: bitmap of types of events supported by the device (EV_KEY,
+ * EV_REL, etc.)
+ * @keybit: bitmap of keys/buttons this device has
+ * @relbit: bitmap of relative axes for the device
+ * @absbit: bitmap of absolute axes for the device
+ * @mscbit: bitmap of miscellaneous events supported by the device
+ * @ledbit: bitmap of leds present on the device
+ * @sndbit: bitmap of sound effects supported by the device
+ * @ffbit: bitmap of force feedback effects supported by the device
+ * @swbit: bitmap of switches present on the device
+ * @keycodemax: size of keycode table
+ * @keycodesize: size of elements in keycode table
+ * @keycode: map of scancodes to keycodes for this device
+ * @setkeycode: optional method to alter current keymap, used to implement
+ * sparse keymaps. If not supplied default mechanism will be used.
+ * The method is being called while holding event_lock and thus must
+ * not sleep
+ * @getkeycode: optional method to retrieve current keymap. If not supplied
+ * default mechanism will be used. The method is being called while
+ * holding event_lock and thus must not sleep
+ * @ff: force feedback structure associated with the device if device
+ * supports force feedback effects
+ * @repeat_key: stores key code of the last key pressed; used to implement
+ * software autorepeat
+ * @timer: timer for software autorepeat
+ * @sync: set to 1 when there were no new events since last EV_SYNC
+ * @abs: current values for reports from absolute axes
+ * @rep: current values for autorepeat parameters (delay, rate)
+ * @key: reflects current state of device's keys/buttons
+ * @led: reflects current state of device's LEDs
+ * @snd: reflects current state of sound effects
+ * @sw: reflects current state of device's switches
+ * @absmax: maximum values for events coming from absolute axes
+ * @absmin: minimum values for events coming from absolute axes
+ * @absfuzz: describes noisiness for axes
+ * @absflat: size of the center flat position (used by joydev)
+ * @absres: resolution used for events coming form absolute axes
+ * @open: this method is called when the very first user calls
+ * input_open_device(). The driver must prepare the device
+ * to start generating events (start polling thread,
+ * request an IRQ, submit URB, etc.)
+ * @close: this method is called when the very last user calls
+ * input_close_device().
+ * @flush: purges the device. Most commonly used to get rid of force
+ * feedback effects loaded into the device when disconnecting
+ * from it
+ * @event: event handler for events sent _to_ the device, like EV_LED
+ * or EV_SND. The device is expected to carry out the requested
+ * action (turn on a LED, play sound, etc.) The call is protected
+ * by @event_lock and must not sleep
+ * @grab: input handle that currently has the device grabbed (via
+ * EVIOCGRAB ioctl). When a handle grabs a device it becomes sole
+ * recipient for all input events coming from the device
+ * @event_lock: this spinlock is is taken when input core receives
+ * and processes a new event for the device (in input_event()).
+ * Code that accesses and/or modifies parameters of a device
+ * (such as keymap or absmin, absmax, absfuzz, etc.) after device
+ * has been registered with input core must take this lock.
+ * @mutex: serializes calls to open(), close() and flush() methods
+ * @users: stores number of users (input handlers) that opened this
+ * device. It is used by input_open_device() and input_close_device()
+ * to make sure that dev->open() is only called when the first
+ * user opens device and dev->close() is called when the very
+ * last user closes the device
+ * @going_away: marks devices that are in a middle of unregistering and
+ * causes input_open_device*() fail with -ENODEV.
+ * @dev: driver model's view of this device
+ * @h_list: list of input handles associated with the device. When
+ * accessing the list dev->mutex must be held
+ * @node: used to place the device onto input_dev_list
+ */
struct input_dev {
-
- void *private;
-
const char *name;
const char *phys;
const char *uniq;
struct input_id id;
- unsigned long evbit[NBITS(EV_MAX)];
- unsigned long keybit[NBITS(KEY_MAX)];
- unsigned long relbit[NBITS(REL_MAX)];
- unsigned long absbit[NBITS(ABS_MAX)];
- unsigned long mscbit[NBITS(MSC_MAX)];
- unsigned long ledbit[NBITS(LED_MAX)];
- unsigned long sndbit[NBITS(SND_MAX)];
- unsigned long ffbit[NBITS(FF_MAX)];
- unsigned long swbit[NBITS(SW_MAX)];
+ unsigned long evbit[BITS_TO_LONGS(EV_CNT)];
+ unsigned long keybit[BITS_TO_LONGS(KEY_CNT)];
+ unsigned long relbit[BITS_TO_LONGS(REL_CNT)];
+ unsigned long absbit[BITS_TO_LONGS(ABS_CNT)];
+ unsigned long mscbit[BITS_TO_LONGS(MSC_CNT)];
+ unsigned long ledbit[BITS_TO_LONGS(LED_CNT)];
+ unsigned long sndbit[BITS_TO_LONGS(SND_CNT)];
+ unsigned long ffbit[BITS_TO_LONGS(FF_CNT)];
+ unsigned long swbit[BITS_TO_LONGS(SW_CNT)];
unsigned int keycodemax;
unsigned int keycodesize;
void *keycode;
+ int (*setkeycode)(struct input_dev *dev,
+ unsigned int scancode, unsigned int keycode);
+ int (*getkeycode)(struct input_dev *dev,
+ unsigned int scancode, unsigned int *keycode);
struct ff_device *ff;
unsigned int repeat_key;
struct timer_list timer;
- int state;
-
int sync;
int abs[ABS_MAX + 1];
int rep[REP_MAX + 1];
- unsigned long key[NBITS(KEY_MAX)];
- unsigned long led[NBITS(LED_MAX)];
- unsigned long snd[NBITS(SND_MAX)];
- unsigned long sw[NBITS(SW_MAX)];
+ unsigned long key[BITS_TO_LONGS(KEY_CNT)];
+ unsigned long led[BITS_TO_LONGS(LED_CNT)];
+ unsigned long snd[BITS_TO_LONGS(SND_CNT)];
+ unsigned long sw[BITS_TO_LONGS(SW_CNT)];
int absmax[ABS_MAX + 1];
int absmin[ABS_MAX + 1];
int absfuzz[ABS_MAX + 1];
int absflat[ABS_MAX + 1];
+ int absres[ABS_MAX + 1];
int (*open)(struct input_dev *dev);
void (*close)(struct input_dev *dev);
struct input_handle *grab;
- struct mutex mutex; /* serializes open and close operations */
+ spinlock_t event_lock;
+ struct mutex mutex;
+
unsigned int users;
+ bool going_away;
- struct class_device cdev;
+ struct device dev;
struct list_head h_list;
struct list_head node;
};
-#define to_input_dev(d) container_of(d, struct input_dev, cdev)
+#define to_input_dev(d) container_of(d, struct input_dev, dev)
/*
* Verify that we are in sync with input_device_id mod_devicetable.h #defines
#error "EV_MAX and INPUT_DEVICE_ID_EV_MAX do not match"
#endif
+#if KEY_MIN_INTERESTING != INPUT_DEVICE_ID_KEY_MIN_INTERESTING
+#error "KEY_MIN_INTERESTING and INPUT_DEVICE_ID_KEY_MIN_INTERESTING do not match"
+#endif
+
#if KEY_MAX != INPUT_DEVICE_ID_KEY_MAX
#error "KEY_MAX and INPUT_DEVICE_ID_KEY_MAX do not match"
#endif
/**
* struct input_handler - implements one of interfaces for input devices
* @private: driver-specific data
- * @event: event handler
+ * @event: event handler. This method is being called by input core with
+ * interrupts disabled and dev->event_lock spinlock held and so
+ * it may not sleep
+ * @filter: similar to @event; separates normal event handlers from
+ * "filters".
+ * @match: called after comparing device's id with handler's id_table
+ * to perform fine-grained matching between device and handler
* @connect: called when attaching a handler to an input device
* @disconnect: disconnects a handler from input device
* @start: starts handler for given handle. This function is called by
* @name: name of the handler, to be shown in /proc/bus/input/handlers
* @id_table: pointer to a table of input_device_ids this driver can
* handle
- * @blacklist: prointer to a table of input_device_ids this driver should
- * ignore even if they match @id_table
* @h_list: list of input handles associated with the handler
* @node: for placing the driver onto input_handler_list
+ *
+ * Input handlers attach to input devices and create input handles. There
+ * are likely several handlers attached to any given input device at the
+ * same time. All of them will get their copy of input event generated by
+ * the device.
+ *
+ * The very same structure is used to implement input filters. Input core
+ * allows filters to run first and will not pass event to regular handlers
+ * if any of the filters indicate that the event should be filtered (by
+ * returning %true from their filter() method).
+ *
+ * Note that input core serializes calls to connect() and disconnect()
+ * methods.
*/
struct input_handler {
void *private;
void (*event)(struct input_handle *handle, unsigned int type, unsigned int code, int value);
- struct input_handle* (*connect)(struct input_handler *handler, struct input_dev *dev, const struct input_device_id *id);
+ bool (*filter)(struct input_handle *handle, unsigned int type, unsigned int code, int value);
+ bool (*match)(struct input_handler *handler, struct input_dev *dev);
+ int (*connect)(struct input_handler *handler, struct input_dev *dev, const struct input_device_id *id);
void (*disconnect)(struct input_handle *handle);
void (*start)(struct input_handle *handle);
const char *name;
const struct input_device_id *id_table;
- const struct input_device_id *blacklist;
struct list_head h_list;
struct list_head node;
};
+/**
+ * struct input_handle - links input device with an input handler
+ * @private: handler-specific data
+ * @open: counter showing whether the handle is 'open', i.e. should deliver
+ * events from its device
+ * @name: name given to the handle by handler that created it
+ * @dev: input device the handle is attached to
+ * @handler: handler that works with the device through this handle
+ * @d_node: used to put the handle on device's list of attached handles
+ * @h_node: used to put the handle on handler's list of handles from which
+ * it gets events
+ */
struct input_handle {
void *private;
struct list_head h_node;
};
-#define to_dev(n) container_of(n,struct input_dev,node)
-#define to_handler(n) container_of(n,struct input_handler,node);
-#define to_handle(n) container_of(n,struct input_handle,d_node)
-#define to_handle_h(n) container_of(n,struct input_handle,h_node)
-
struct input_dev *input_allocate_device(void);
void input_free_device(struct input_dev *dev);
static inline struct input_dev *input_get_device(struct input_dev *dev)
{
- return to_input_dev(class_device_get(&dev->cdev));
+ return dev ? to_input_dev(get_device(&dev->dev)) : NULL;
}
static inline void input_put_device(struct input_dev *dev)
{
- class_device_put(&dev->cdev);
+ if (dev)
+ put_device(&dev->dev);
+}
+
+static inline void *input_get_drvdata(struct input_dev *dev)
+{
+ return dev_get_drvdata(&dev->dev);
+}
+
+static inline void input_set_drvdata(struct input_dev *dev, void *data)
+{
+ dev_set_drvdata(&dev->dev, data);
}
-int input_register_device(struct input_dev *);
+int __must_check input_register_device(struct input_dev *);
void input_unregister_device(struct input_dev *);
-int input_register_handler(struct input_handler *);
+int __must_check input_register_handler(struct input_handler *);
void input_unregister_handler(struct input_handler *);
+int input_handler_for_each_handle(struct input_handler *, void *data,
+ int (*fn)(struct input_handle *, void *));
+
+int input_register_handle(struct input_handle *);
+void input_unregister_handle(struct input_handle *);
+
int input_grab_device(struct input_handle *);
void input_release_device(struct input_handle *);
input_event(dev, EV_SYN, SYN_REPORT, 0);
}
+static inline void input_mt_sync(struct input_dev *dev)
+{
+ input_event(dev, EV_SYN, SYN_MT_REPORT, 0);
+}
+
+void input_set_capability(struct input_dev *dev, unsigned int type, unsigned int code);
+
static inline void input_set_abs_params(struct input_dev *dev, int axis, int min, int max, int fuzz, int flat)
{
dev->absmin[axis] = min;
dev->absfuzz[axis] = fuzz;
dev->absflat[axis] = flat;
- dev->absbit[LONG(axis)] |= BIT(axis);
+ dev->absbit[BIT_WORD(axis)] |= BIT_MASK(axis);
}
+int input_get_keycode(struct input_dev *dev,
+ unsigned int scancode, unsigned int *keycode);
+int input_set_keycode(struct input_dev *dev,
+ unsigned int scancode, unsigned int keycode);
+
extern struct class input_class;
/**
* @max_effects: maximum number of effects supported by device
* @effects: pointer to an array of effects currently loaded into device
* @effect_owners: array of effect owners; when file handle owning
- * an effect gets closed the effcet is automatically erased
+ * an effect gets closed the effect is automatically erased
*
* Every force-feedback device must implement upload() and playback()
* methods; erase() is optional. set_gain() and set_autocenter() need
* only be implemented if driver sets up FF_GAIN and FF_AUTOCENTER
* bits.
+ *
+ * Note that playback(), set_gain() and set_autocenter() are called with
+ * dev->event_lock spinlock held and interrupts off and thus may not
+ * sleep.
*/
struct ff_device {
int (*upload)(struct input_dev *dev, struct ff_effect *effect,
void *private;
- unsigned long ffbit[NBITS(FF_MAX)];
+ unsigned long ffbit[BITS_TO_LONGS(FF_CNT)];
struct mutex mutex;
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff