#define EVIOCGVERSION _IOR('E', 0x01, int) /* get driver version */
#define EVIOCGID _IOR('E', 0x02, struct input_id) /* get device ID */
-#define EVIOCGREP _IOR('E', 0x03, int[2]) /* get repeat settings */
-#define EVIOCSREP _IOW('E', 0x03, int[2]) /* set repeat settings */
-#define EVIOCGKEYCODE _IOR('E', 0x04, int[2]) /* get keycode */
-#define EVIOCSKEYCODE _IOW('E', 0x04, int[2]) /* set keycode */
+#define EVIOCGREP _IOR('E', 0x03, unsigned int[2]) /* get repeat settings */
+#define EVIOCSREP _IOW('E', 0x03, unsigned int[2]) /* set repeat settings */
+#define EVIOCGKEYCODE _IOR('E', 0x04, unsigned int[2]) /* get keycode */
+#define EVIOCSKEYCODE _IOW('E', 0x04, unsigned int[2]) /* set keycode */
#define EVIOCGNAME(len) _IOC(_IOC_READ, 'E', 0x06, len) /* get device name */
#define EVIOCGPHYS(len) _IOC(_IOC_READ, 'E', 0x07, len) /* get physical location */
#define KEY_DISPLAY_OFF 245 /* display device to off state */
#define KEY_WIMAX 246
+#define KEY_RFKILL 247 /* Key that controls all radios */
-/* Range 248 - 255 is reserved for special needs of AT keyboard driver */
+/* Code 255 is reserved for special needs of AT keyboard driver */
#define BTN_MISC 0x100
#define BTN_0 0x100
#define KEY_NUMERIC_POUND 0x20b
#define KEY_CAMERA_FOCUS 0x210
+#define KEY_WPS_BUTTON 0x211 /* WiFi Protected Setup key */
+
+#define BTN_TRIGGER_HAPPY 0x2c0
+#define BTN_TRIGGER_HAPPY1 0x2c0
+#define BTN_TRIGGER_HAPPY2 0x2c1
+#define BTN_TRIGGER_HAPPY3 0x2c2
+#define BTN_TRIGGER_HAPPY4 0x2c3
+#define BTN_TRIGGER_HAPPY5 0x2c4
+#define BTN_TRIGGER_HAPPY6 0x2c5
+#define BTN_TRIGGER_HAPPY7 0x2c6
+#define BTN_TRIGGER_HAPPY8 0x2c7
+#define BTN_TRIGGER_HAPPY9 0x2c8
+#define BTN_TRIGGER_HAPPY10 0x2c9
+#define BTN_TRIGGER_HAPPY11 0x2ca
+#define BTN_TRIGGER_HAPPY12 0x2cb
+#define BTN_TRIGGER_HAPPY13 0x2cc
+#define BTN_TRIGGER_HAPPY14 0x2cd
+#define BTN_TRIGGER_HAPPY15 0x2ce
+#define BTN_TRIGGER_HAPPY16 0x2cf
+#define BTN_TRIGGER_HAPPY17 0x2d0
+#define BTN_TRIGGER_HAPPY18 0x2d1
+#define BTN_TRIGGER_HAPPY19 0x2d2
+#define BTN_TRIGGER_HAPPY20 0x2d3
+#define BTN_TRIGGER_HAPPY21 0x2d4
+#define BTN_TRIGGER_HAPPY22 0x2d5
+#define BTN_TRIGGER_HAPPY23 0x2d6
+#define BTN_TRIGGER_HAPPY24 0x2d7
+#define BTN_TRIGGER_HAPPY25 0x2d8
+#define BTN_TRIGGER_HAPPY26 0x2d9
+#define BTN_TRIGGER_HAPPY27 0x2da
+#define BTN_TRIGGER_HAPPY28 0x2db
+#define BTN_TRIGGER_HAPPY29 0x2dc
+#define BTN_TRIGGER_HAPPY30 0x2dd
+#define BTN_TRIGGER_HAPPY31 0x2de
+#define BTN_TRIGGER_HAPPY32 0x2df
+#define BTN_TRIGGER_HAPPY33 0x2e0
+#define BTN_TRIGGER_HAPPY34 0x2e1
+#define BTN_TRIGGER_HAPPY35 0x2e2
+#define BTN_TRIGGER_HAPPY36 0x2e3
+#define BTN_TRIGGER_HAPPY37 0x2e4
+#define BTN_TRIGGER_HAPPY38 0x2e5
+#define BTN_TRIGGER_HAPPY39 0x2e6
+#define BTN_TRIGGER_HAPPY40 0x2e7
/* We avoid low common keys in module aliases so they don't get huge. */
#define KEY_MIN_INTERESTING KEY_MUTE
#define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */
#define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */
#define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */
+#define ABS_MT_PRESSURE 0x3a /* Pressure on contact area */
#define ABS_MAX 0x3f
#define ABS_CNT (ABS_MAX+1)
* @keycodesize: size of elements in keycode table
* @keycode: map of scancodes to keycodes for this device
* @setkeycode: optional method to alter current keymap, used to implement
- * sparse keymaps. If not supplied default mechanism will be used
+ * sparse keymaps. If not supplied default mechanism will be used.
+ * The method is being called while holding event_lock and thus must
+ * not sleep
* @getkeycode: optional method to retrieve current keymap. If not supplied
- * default mechanism will be used
+ * default mechanism will be used. The method is being called while
+ * holding event_lock and thus must not sleep
* @ff: force feedback structure associated with the device if device
* supports force feedback effects
* @repeat_key: stores key code of the last key pressed; used to implement
unsigned int keycodemax;
unsigned int keycodesize;
void *keycode;
- int (*setkeycode)(struct input_dev *dev, int scancode, int keycode);
- int (*getkeycode)(struct input_dev *dev, int scancode, int *keycode);
+ int (*setkeycode)(struct input_dev *dev,
+ unsigned int scancode, unsigned int keycode);
+ int (*getkeycode)(struct input_dev *dev,
+ unsigned int scancode, unsigned int *keycode);
struct ff_device *ff;
* @event: event handler. This method is being called by input core with
* interrupts disabled and dev->event_lock spinlock held and so
* it may not sleep
+ * @filter: similar to @event; separates normal event handlers from
+ * "filters".
+ * @match: called after comparing device's id with handler's id_table
+ * to perform fine-grained matching between device and handler
* @connect: called when attaching a handler to an input device
* @disconnect: disconnects a handler from input device
* @start: starts handler for given handle. This function is called by
* @name: name of the handler, to be shown in /proc/bus/input/handlers
* @id_table: pointer to a table of input_device_ids this driver can
* handle
- * @blacklist: pointer to a table of input_device_ids this driver should
- * ignore even if they match @id_table
* @h_list: list of input handles associated with the handler
* @node: for placing the driver onto input_handler_list
*
* same time. All of them will get their copy of input event generated by
* the device.
*
+ * The very same structure is used to implement input filters. Input core
+ * allows filters to run first and will not pass event to regular handlers
+ * if any of the filters indicate that the event should be filtered (by
+ * returning %true from their filter() method).
+ *
* Note that input core serializes calls to connect() and disconnect()
* methods.
*/
void *private;
void (*event)(struct input_handle *handle, unsigned int type, unsigned int code, int value);
+ bool (*filter)(struct input_handle *handle, unsigned int type, unsigned int code, int value);
+ bool (*match)(struct input_handler *handler, struct input_dev *dev);
int (*connect)(struct input_handler *handler, struct input_dev *dev, const struct input_device_id *id);
void (*disconnect)(struct input_handle *handle);
void (*start)(struct input_handle *handle);
const char *name;
const struct input_device_id *id_table;
- const struct input_device_id *blacklist;
struct list_head h_list;
struct list_head node;
int __must_check input_register_handler(struct input_handler *);
void input_unregister_handler(struct input_handler *);
+int input_handler_for_each_handle(struct input_handler *, void *data,
+ int (*fn)(struct input_handle *, void *));
+
int input_register_handle(struct input_handle *);
void input_unregister_handle(struct input_handle *);
dev->absbit[BIT_WORD(axis)] |= BIT_MASK(axis);
}
-int input_get_keycode(struct input_dev *dev, int scancode, int *keycode);
-int input_set_keycode(struct input_dev *dev, int scancode, int keycode);
+int input_get_keycode(struct input_dev *dev,
+ unsigned int scancode, unsigned int *keycode);
+int input_set_keycode(struct input_dev *dev,
+ unsigned int scancode, unsigned int keycode);
extern struct class input_class;
* methods; erase() is optional. set_gain() and set_autocenter() need
* only be implemented if driver sets up FF_GAIN and FF_AUTOCENTER
* bits.
+ *
+ * Note that playback(), set_gain() and set_autocenter() are called with
+ * dev->event_lock spinlock held and interrupts off and thus may not
+ * sleep.
*/
struct ff_device {
int (*upload)(struct input_dev *dev, struct ff_effect *effect,
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff