* sign followed by value, e.g.:
*
* static int init_variable __initdata = 0;
- * static char linux_logo[] __initdata = { 0x32, 0x36, ... };
+ * static const char linux_logo[] __initconst = { 0x32, 0x36, ... };
*
* Don't forget to initialize data not at file scope, i.e. within a function,
* as gcc otherwise puts the data into the bss section and not into the init
/* These are for everybody (although not all archs will actually
discard it in modules) */
-#define __init __attribute__ ((__section__ (".init.text")))
-#define __initdata __attribute__ ((__section__ (".init.data")))
-#define __exitdata __attribute__ ((__section__(".exit.data")))
-#define __exit_call __attribute_used__ __attribute__ ((__section__ (".exitcall.exit")))
+#define __init __section(.init.text) __cold notrace
+#define __initdata __section(.init.data)
+#define __initconst __section(.init.rodata)
+#define __exitdata __section(.exit.data)
+#define __exit_call __used __section(.exitcall.exit)
+
+/* modpost check for section mismatches during the kernel build.
+ * A section mismatch happens when there are references from a
+ * code or data section to an init section (both code or data).
+ * The init sections are (for most archs) discarded by the kernel
+ * when early init has completed so all such references are potential bugs.
+ * For exit sections the same issue exists.
+ * The following markers are used for the cases where the reference to
+ * the *init / *exit section (code or data) is valid and will teach
+ * modpost not to issue a warning.
+ * The markers follow same syntax rules as __init / __initdata. */
+#define __ref __section(.ref.text) noinline
+#define __refdata __section(.ref.data)
+#define __refconst __section(.ref.rodata)
+
+/* compatibility defines */
+#define __init_refok __ref
+#define __initdata_refok __refdata
+#define __exit_refok __ref
+
#ifdef MODULE
-#define __exit __attribute__ ((__section__(".exit.text")))
+#define __exitused
#else
-#define __exit __attribute_used__ __attribute__ ((__section__(".exit.text")))
+#define __exitused __used
#endif
+#define __exit __section(.exit.text) __exitused __cold
+
+/* Used for HOTPLUG */
+#define __devinit __section(.devinit.text) __cold
+#define __devinitdata __section(.devinit.data)
+#define __devinitconst __section(.devinit.rodata)
+#define __devexit __section(.devexit.text) __exitused __cold
+#define __devexitdata __section(.devexit.data)
+#define __devexitconst __section(.devexit.rodata)
+
+/* Used for HOTPLUG_CPU */
+#define __cpuinit __section(.cpuinit.text) __cold
+#define __cpuinitdata __section(.cpuinit.data)
+#define __cpuinitconst __section(.cpuinit.rodata)
+#define __cpuexit __section(.cpuexit.text) __exitused __cold
+#define __cpuexitdata __section(.cpuexit.data)
+#define __cpuexitconst __section(.cpuexit.rodata)
+
+/* Used for MEMORY_HOTPLUG */
+#define __meminit __section(.meminit.text) __cold
+#define __meminitdata __section(.meminit.data)
+#define __meminitconst __section(.meminit.rodata)
+#define __memexit __section(.memexit.text) __exitused __cold
+#define __memexitdata __section(.memexit.data)
+#define __memexitconst __section(.memexit.rodata)
+
/* For assembly routines */
+#define __HEAD .section ".head.text","ax"
#define __INIT .section ".init.text","ax"
#define __FINIT .previous
-#define __INITDATA .section ".init.data","aw"
+
+#define __INITDATA .section ".init.data","aw",%progbits
+#define __INITRODATA .section ".init.rodata","a",%progbits
+#define __FINITDATA .previous
+
+#define __DEVINIT .section ".devinit.text", "ax"
+#define __DEVINITDATA .section ".devinit.data", "aw"
+#define __DEVINITRODATA .section ".devinit.rodata", "a"
+
+#define __CPUINIT .section ".cpuinit.text", "ax"
+#define __CPUINITDATA .section ".cpuinit.data", "aw"
+#define __CPUINITRODATA .section ".cpuinit.rodata", "a"
+
+#define __MEMINIT .section ".meminit.text", "ax"
+#define __MEMINITDATA .section ".meminit.data", "aw"
+#define __MEMINITRODATA .section ".meminit.rodata", "a"
+
+/* silence warnings when references are OK */
+#define __REF .section ".ref.text", "ax"
+#define __REFDATA .section ".ref.data", "aw"
+#define __REFCONST .section ".ref.rodata", "a"
#ifndef __ASSEMBLY__
/*
extern initcall_t __con_initcall_start[], __con_initcall_end[];
extern initcall_t __security_initcall_start[], __security_initcall_end[];
+/* Used for contructor calls. */
+typedef void (*ctor_fn_t)(void);
+
/* Defined in init/main.c */
-extern char saved_command_line[];
+extern int do_one_initcall(initcall_t fn);
+extern char __initdata boot_command_line[];
+extern char *saved_command_line;
extern unsigned int reset_devices;
/* used by init/main.c */
-extern void setup_arch(char **);
+void setup_arch(char **);
+void prepare_namespace(void);
+
+extern void (*late_time_init)(void);
+
+extern int initcall_debug;
#endif
*/
#define __define_initcall(level,fn,id) \
- static initcall_t __initcall_##fn##id __attribute_used__ \
+ static initcall_t __initcall_##fn##id __used \
__attribute__((__section__(".initcall" level ".init"))) = fn
/*
+ * Early initcalls run before initializing SMP.
+ *
+ * Only for built-in code, not modules.
+ */
+#define early_initcall(fn) __define_initcall("early",fn,early)
+
+/*
* A "pure" initcall has no dependencies on anything else, and purely
* initializes variables that couldn't be statically initialized.
*
* This only exists for built-in code, not for modules.
*/
-#define pure_initcall(fn) __define_initcall("0",fn,1)
+#define pure_initcall(fn) __define_initcall("0",fn,0)
#define core_initcall(fn) __define_initcall("1",fn,1)
#define core_initcall_sync(fn) __define_initcall("1s",fn,1s)
#define console_initcall(fn) \
static initcall_t __initcall_##fn \
- __attribute_used__ __attribute__((__section__(".con_initcall.init")))=fn
+ __used __section(.con_initcall.init) = fn
#define security_initcall(fn) \
static initcall_t __initcall_##fn \
- __attribute_used__ __attribute__((__section__(".security_initcall.init"))) = fn
+ __used __section(.security_initcall.init) = fn
struct obs_kernel_param {
const char *str;
* obs_kernel_param "array" too far apart in .init.setup.
*/
#define __setup_param(str, unique_id, fn, early) \
- static char __setup_str_##unique_id[] __initdata = str; \
+ static const char __setup_str_##unique_id[] __initconst \
+ __aligned(1) = str; \
static struct obs_kernel_param __setup_##unique_id \
- __attribute_used__ \
- __attribute__((__section__(".init.setup"))) \
+ __used __section(.init.setup) \
__attribute__((aligned((sizeof(long))))) \
= { __setup_str_##unique_id, fn, early }
-#define __setup_null_param(str, unique_id) \
- __setup_param(str, unique_id, NULL, 0)
-
#define __setup(str, fn) \
__setup_param(str, fn, fn, 0)
-#define __obsolete_setup(str) \
- __setup_null_param(str, __LINE__)
-
/* NOTE: fn is as per module_param, not __setup! Emits warning if fn
* returns non-zero. */
#define early_param(str, fn) \
__setup_param(str, fn, fn, 1)
-/* Relies on saved_command_line being set */
+/* Relies on boot_command_line being set */
void __init parse_early_param(void);
+void __init parse_early_options(char *cmdline);
#endif /* __ASSEMBLY__ */
/**
#else /* MODULE */
/* Don't use these in modules, but some people do... */
+#define early_initcall(fn) module_init(fn)
#define core_initcall(fn) module_init(fn)
#define postcore_initcall(fn) module_init(fn)
#define arch_initcall(fn) module_init(fn)
#define security_initcall(fn) module_init(fn)
-/* These macros create a dummy inline: gcc 2.9x does not count alias
- as usage, hence the `unused function' warning when __init functions
- are declared static. We use the dummy __*_module_inline functions
- both to kill the warning and check the type of the init/cleanup
- function. */
-
-/* Each module must use one module_init(), or one no_module_init */
+/* Each module must use one module_init(). */
#define module_init(initfn) \
static inline initcall_t __inittest(void) \
{ return initfn; } \
void cleanup_module(void) __attribute__((alias(#exitfn)));
#define __setup_param(str, unique_id, fn) /* nothing */
-#define __setup_null_param(str, unique_id) /* nothing */
#define __setup(str, func) /* nothing */
-#define __obsolete_setup(str) /* nothing */
#endif
-/* Data marked not to be saved by software_suspend() */
-#define __nosavedata __attribute__ ((__section__ (".data.nosave")))
+/* Data marked not to be saved by software suspend */
+#define __nosavedata __section(.data.nosave)
/* This means "can be init if no module support, otherwise module load
may call it." */
#ifdef CONFIG_MODULES
#define __init_or_module
#define __initdata_or_module
+#define __initconst_or_module
+#define __INIT_OR_MODULE .text
+#define __INITDATA_OR_MODULE .data
+#define __INITRODATA_OR_MODULE .section ".rodata","a",%progbits
#else
#define __init_or_module __init
#define __initdata_or_module __initdata
+#define __initconst_or_module __initconst
+#define __INIT_OR_MODULE __INIT
+#define __INITDATA_OR_MODULE __INITDATA
+#define __INITRODATA_OR_MODULE __INITRODATA
#endif /*CONFIG_MODULES*/
-#ifdef CONFIG_HOTPLUG
-#define __devinit
-#define __devinitdata
-#define __devexit
-#define __devexitdata
-#else
-#define __devinit __init
-#define __devinitdata __initdata
-#define __devexit __exit
-#define __devexitdata __exitdata
-#endif
-
-#ifdef CONFIG_HOTPLUG_CPU
-#define __cpuinit
-#define __cpuinitdata
-#define __cpuexit
-#define __cpuexitdata
-#else
-#define __cpuinit __init
-#define __cpuinitdata __initdata
-#define __cpuexit __exit
-#define __cpuexitdata __exitdata
-#endif
-
-#if defined(CONFIG_MEMORY_HOTPLUG) || defined(CONFIG_ACPI_HOTPLUG_MEMORY) \
- || defined(CONFIG_ACPI_HOTPLUG_MEMORY_MODULE)
-#define __meminit
-#define __meminitdata
-#define __memexit
-#define __memexitdata
-#else
-#define __meminit __init
-#define __meminitdata __initdata
-#define __memexit __exit
-#define __memexitdata __exitdata
-#endif
-
/* Functions marked as __devexit may be discarded at kernel link time, depending
on config options. Newer versions of binutils detect references from
retained sections to discarded sections and flag an error. Pointers to