#ifndef _LINUX_INIT_H
#define _LINUX_INIT_H
-#include <linux/config.h>
#include <linux/compiler.h>
/* These macros are used to mark some functions or
/* These are for everybody (although not all archs will actually
discard it in modules) */
-#define __init __attribute__ ((__section__ (".init.text")))
+#define __init __attribute__ ((__section__ (".init.text"))) __cold
#define __initdata __attribute__ ((__section__ (".init.data")))
#define __exitdata __attribute__ ((__section__(".exit.data")))
#define __exit_call __attribute_used__ __attribute__ ((__section__ (".exitcall.exit")))
+/* modpost check for section mismatches during the kernel build.
+ * A section mismatch happens when there are references from a
+ * code or data section to an init section (both code or data).
+ * The init sections are (for most archs) discarded by the kernel
+ * when early init has completed so all such references are potential bugs.
+ * For exit sections the same issue exists.
+ * The following markers are used for the cases where the reference to
+ * the init/exit section (code or data) is valid and will teach modpost
+ * not to issue a warning.
+ * The markers follow same syntax rules as __init / __initdata. */
+#define __init_refok noinline __attribute__ ((__section__ (".text.init.refok")))
+#define __initdata_refok __attribute__ ((__section__ (".data.init.refok")))
+#define __exit_refok noinline __attribute__ ((__section__ (".exit.text.refok")))
+
#ifdef MODULE
-#define __exit __attribute__ ((__section__(".exit.text")))
+#define __exit __attribute__ ((__section__(".exit.text"))) __cold
#else
-#define __exit __attribute_used__ __attribute__ ((__section__(".exit.text")))
+#define __exit __attribute_used__ __attribute__ ((__section__(".exit.text"))) __cold
#endif
/* For assembly routines */
#define __INIT .section ".init.text","ax"
+#define __INIT_REFOK .section ".text.init.refok","ax"
#define __FINIT .previous
#define __INITDATA .section ".init.data","aw"
+#define __INITDATA_REFOK .section ".data.init.refok","aw"
#ifndef __ASSEMBLY__
/*
extern initcall_t __security_initcall_start[], __security_initcall_end[];
/* Defined in init/main.c */
-extern char saved_command_line[];
+extern char __initdata boot_command_line[];
+extern char *saved_command_line;
+extern unsigned int reset_devices;
+
+/* used by init/main.c */
+void setup_arch(char **);
+void prepare_namespace(void);
+
#endif
#ifndef MODULE
* by link order.
* For backwards compatibility, initcall() puts the call in
* the device init subsection.
+ *
+ * The `id' arg to __define_initcall() is needed so that multiple initcalls
+ * can point at the same handler without causing duplicate-symbol build errors.
*/
-#define __define_initcall(level,fn) \
- static initcall_t __initcall_##fn __attribute_used__ \
+#define __define_initcall(level,fn,id) \
+ static initcall_t __initcall_##fn##id __attribute_used__ \
__attribute__((__section__(".initcall" level ".init"))) = fn
-#define core_initcall(fn) __define_initcall("1",fn)
-#define postcore_initcall(fn) __define_initcall("2",fn)
-#define arch_initcall(fn) __define_initcall("3",fn)
-#define subsys_initcall(fn) __define_initcall("4",fn)
-#define fs_initcall(fn) __define_initcall("5",fn)
-#define device_initcall(fn) __define_initcall("6",fn)
-#define late_initcall(fn) __define_initcall("7",fn)
+/*
+ * A "pure" initcall has no dependencies on anything else, and purely
+ * initializes variables that couldn't be statically initialized.
+ *
+ * This only exists for built-in code, not for modules.
+ */
+#define pure_initcall(fn) __define_initcall("0",fn,0)
+
+#define core_initcall(fn) __define_initcall("1",fn,1)
+#define core_initcall_sync(fn) __define_initcall("1s",fn,1s)
+#define postcore_initcall(fn) __define_initcall("2",fn,2)
+#define postcore_initcall_sync(fn) __define_initcall("2s",fn,2s)
+#define arch_initcall(fn) __define_initcall("3",fn,3)
+#define arch_initcall_sync(fn) __define_initcall("3s",fn,3s)
+#define subsys_initcall(fn) __define_initcall("4",fn,4)
+#define subsys_initcall_sync(fn) __define_initcall("4s",fn,4s)
+#define fs_initcall(fn) __define_initcall("5",fn,5)
+#define fs_initcall_sync(fn) __define_initcall("5s",fn,5s)
+#define rootfs_initcall(fn) __define_initcall("rootfs",fn,rootfs)
+#define device_initcall(fn) __define_initcall("6",fn,6)
+#define device_initcall_sync(fn) __define_initcall("6s",fn,6s)
+#define late_initcall(fn) __define_initcall("7",fn,7)
+#define late_initcall_sync(fn) __define_initcall("7s",fn,7s)
#define __initcall(fn) device_initcall(fn)
* obs_kernel_param "array" too far apart in .init.setup.
*/
#define __setup_param(str, unique_id, fn, early) \
- static char __setup_str_##unique_id[] __initdata = str; \
+ static char __setup_str_##unique_id[] __initdata __aligned(1) = str; \
static struct obs_kernel_param __setup_##unique_id \
__attribute_used__ \
__attribute__((__section__(".init.setup"))) \
#define __setup(str, fn) \
__setup_param(str, fn, fn, 0)
-#define __obsolete_setup(str) \
- __setup_null_param(str, __LINE__)
-
/* NOTE: fn is as per module_param, not __setup! Emits warning if fn
* returns non-zero. */
#define early_param(str, fn) \
__setup_param(str, fn, fn, 1)
-/* Relies on saved_command_line being set */
+/* Relies on boot_command_line being set */
void __init parse_early_param(void);
#endif /* __ASSEMBLY__ */
* module_init() - driver initialization entry point
* @x: function to be run at kernel boot time or module insertion
*
- * module_init() will either be called during do_initcalls (if
+ * module_init() will either be called during do_initcalls() (if
* builtin) or at module insertion time (if a module). There can only
* be one per module.
*/
#define __setup_param(str, unique_id, fn) /* nothing */
#define __setup_null_param(str, unique_id) /* nothing */
#define __setup(str, func) /* nothing */
-#define __obsolete_setup(str) /* nothing */
#endif
-/* Data marked not to be saved by software_suspend() */
+/* Data marked not to be saved by software suspend */
#define __nosavedata __attribute__ ((__section__ (".data.nosave")))
/* This means "can be init if no module support, otherwise module load
#define __cpuexitdata __exitdata
#endif
-#ifdef CONFIG_MEMORY_HOTPLUG
+#if defined(CONFIG_MEMORY_HOTPLUG) || defined(CONFIG_ACPI_HOTPLUG_MEMORY) \
+ || defined(CONFIG_ACPI_HOTPLUG_MEMORY_MODULE)
#define __meminit
#define __meminitdata
#define __memexit
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff