#include <asm/system.h>
#include <asm/io.h>
#include <asm/semaphore.h>
+#include <asm/mutex.h>
/******************************************************************************
* IDE driver configuration options (play with these as desired):
struct hwif_s;
typedef int (ide_ack_intr_t)(struct hwif_s *);
-#ifndef NO_DMA
-#define NO_DMA 255
-#endif
-
/*
* hwif_chipset_t is used to keep track of the specific hardware
* chipset used by each IDE interface, if known.
*/
-typedef enum { ide_unknown, ide_generic, ide_pci,
+enum { ide_unknown, ide_generic, ide_pci,
ide_cmd640, ide_dtc2278, ide_ali14xx,
ide_qd65xx, ide_umc8672, ide_ht6560b,
ide_rz1000, ide_trm290,
ide_cmd646, ide_cy82c693, ide_4drives,
ide_pmac, ide_etrax100, ide_acorn,
ide_au1xxx, ide_forced
-} hwif_chipset_t;
+};
+
+typedef u8 hwif_chipset_t;
/*
* Structure to hold all information about the location of this port
typedef struct hw_regs_s {
unsigned long io_ports[IDE_NR_PORTS]; /* task file registers */
int irq; /* our irq number */
- int dma; /* our dma entry */
ide_ack_intr_t *ack_intr; /* acknowledge interrupt */
hwif_chipset_t chipset;
struct device *dev;
} hw_regs_t;
-/*
- * Register new hardware with ide
- */
-int ide_register_hw(hw_regs_t *hw, struct hwif_s **hwifp);
-int ide_register_hw_with_fixup(hw_regs_t *, struct hwif_s **, void (*)(struct hwif_s *));
+struct hwif_s * ide_find_port(unsigned long);
+
+int ide_register_hw(hw_regs_t *, void (*)(struct hwif_s *), int,
+ struct hwif_s **);
-/*
- * Set up hw_regs_t structure before calling ide_register_hw (optional)
- */
void ide_setup_ports( hw_regs_t *hw,
unsigned long base,
int *offsets,
# define ide_init_default_irq(base) (0)
#endif
-/*
- * ide_init_hwif_ports() is OBSOLETE and will be removed in 2.7 series.
- * New ports shouldn't define IDE_ARCH_OBSOLETE_INIT in <asm/ide.h>.
- */
-#ifdef IDE_ARCH_OBSOLETE_INIT
+#ifdef CONFIG_IDE_ARCH_OBSOLETE_INIT
static inline void ide_init_hwif_ports(hw_regs_t *hw,
unsigned long io_addr,
unsigned long ctl_addr,
if (io_addr || ctl_addr)
printk(KERN_WARNING "%s: must not be called\n", __FUNCTION__);
}
-#endif /* IDE_ARCH_OBSOLETE_INIT */
+#endif /* CONFIG_IDE_ARCH_OBSOLETE_INIT */
/* Currently only m68k, apus and m8xx need it */
#ifndef IDE_ARCH_ACK_INTR
* ATA DATA Register Special.
* ATA NSECTOR Count Register().
* ATAPI Byte Count Register.
- * Channel index ordering pairs.
*/
typedef union {
unsigned all :16;
#error "Please fix <asm/byteorder.h>"
#endif
} b;
-} ata_nsector_t, ata_data_t, atapi_bcount_t, ata_index_t;
+} ata_nsector_t, ata_data_t, atapi_bcount_t;
/*
* ATA-IDE Select Register, aka Device-Head
char name[4]; /* drive name, such as "hda" */
char driver_req[10]; /* requests specific driver */
- request_queue_t *queue; /* request queue */
+ struct request_queue *queue; /* request queue */
struct request *rq; /* current request */
struct ide_drive_s *next; /* circular list of hwgroup drives */
void *driver_data; /* extra driver data */
struct hd_driveid *id; /* drive model identification info */
+#ifdef CONFIG_IDE_PROC_FS
struct proc_dir_entry *proc; /* /proc/ide/ directory entry */
struct ide_settings_s *settings;/* /proc/ide/ drive settings */
-
+#endif
struct hwif_s *hwif; /* actually (ide_hwif_t *) */
unsigned long sleep; /* sleep until this time */
select_t select; /* basic drive/head select reg value */
u8 keep_settings; /* restore settings after drive reset */
- u8 autodma; /* device can safely use dma on host */
u8 using_dma; /* disk is using dma for read/write */
u8 retry_pio; /* retrying dma capable host in pio */
u8 state; /* retry state */
unsigned nice0 : 1; /* give obvious excess bandwidth */
unsigned nice2 : 1; /* give a share in our own bandwidth */
unsigned doorlocking : 1; /* for removable only: door lock/unlock works */
+ unsigned nodma : 1; /* disallow DMA */
unsigned autotune : 2; /* 0=default, 1=autotune, 2=noautotune */
unsigned remap_0_to_1 : 1; /* 0=noremap, 1=remap 0->1 (for EZDrive) */
unsigned blocked : 1; /* 1=powermanagment told us not to do anything, so sleep nicely */
unsigned vdma : 1; /* 1=doing PIO over DMA 0=doing normal DMA */
- unsigned addressing; /* : 3;
- * 0=28-bit
- * 1=48-bit
- * 2=48-bit doing 28-bit
- * 3=64-bit
- */
unsigned scsi : 1; /* 0=default, 1=ide-scsi emulation */
unsigned sleeping : 1; /* 1=sleeping & sleep field valid */
unsigned post_reset : 1;
+ unsigned udma33_warned : 1;
+ u8 addressing; /* 0=28-bit, 1=48-bit, 2=48-bit doing 28-bit */
u8 quirk_list; /* considered quirky, set for a specific host */
u8 init_speed; /* transfer rate set at boot */
- u8 pio_speed; /* unused by core, used by some drivers for fallback from DMA */
u8 current_speed; /* current transfer rate set */
+ u8 desired_speed; /* desired transfer rate set */
u8 dn; /* now wide spread use */
u8 wcache; /* status of write cache */
u8 acoustic; /* acoustic management */
unsigned int bios_cyl; /* BIOS/fdisk/LILO number of cyls */
unsigned int cyl; /* "real" number of cyls */
- unsigned int drive_data; /* use by tuneproc/selectproc */
- unsigned int usage; /* current "open()" count for drive */
+ unsigned int drive_data; /* used by set_pio_mode/selectproc */
unsigned int failures; /* current failure count */
unsigned int max_failures; /* maximum allowed failure count */
u64 probed_capacity;/* initial reported media capacity (ide-cd only currently) */
((1<<ide_pci)|(1<<ide_cmd646)|(1<<ide_ali14xx))
#define IDE_CHIPSET_IS_PCI(c) ((IDE_CHIPSET_PCI_MASK >> (c)) & 1)
-struct ide_pci_device_s;
+struct ide_port_info;
typedef struct hwif_s {
struct hwif_s *next; /* for linked-list in ide_hwgroup_t */
unsigned long sata_scr[SATA_NR_PORTS];
unsigned long sata_misc[SATA_NR_PORTS];
- hw_regs_t hw; /* Hardware info */
ide_drive_t drives[MAX_DRIVES]; /* drive info */
u8 major; /* our major number */
u8 straight8; /* Alan's straight 8 check */
u8 bus_state; /* power state of the IDE bus */
- u8 atapi_dma; /* host supports atapi_dma */
+ u32 host_flags;
+
+ u8 pio_mask;
+
u8 ultra_mask;
u8 mwdma_mask;
u8 swdma_mask;
+ u8 cbl; /* cable type */
+
hwif_chipset_t chipset; /* sub-module for tuning.. */
struct pci_dev *pci_dev; /* for pci chipsets */
- struct ide_pci_device_s *cds; /* chipset device struct */
+ const struct ide_port_info *cds; /* chipset device struct */
+
+ ide_ack_intr_t *ack_intr;
void (*rw_disk)(ide_drive_t *, struct request *);
#if 0
ide_hwif_ops_t *hwifops;
#else
- /* routine to tune PIO mode for drives */
- void (*tuneproc)(ide_drive_t *, u8);
- /* routine to retune DMA modes for drives */
- int (*speedproc)(ide_drive_t *, u8);
+ /* routine to program host for PIO mode */
+ void (*set_pio_mode)(ide_drive_t *, const u8);
+ /* routine to program host for DMA mode */
+ void (*set_dma_mode)(ide_drive_t *, const u8);
/* tweaks hardware to select drive */
void (*selectproc)(ide_drive_t *);
/* chipset polling based on hba specifics */
int (*quirkproc)(ide_drive_t *);
/* driver soft-power interface */
int (*busproc)(ide_drive_t *, int);
-// /* host rate limiter */
-// u8 (*ratemask)(ide_drive_t *);
-// /* device rate limiter */
-// u8 (*ratefilter)(ide_drive_t *, u8);
#endif
+ u8 (*mdma_filter)(ide_drive_t *);
+ u8 (*udma_filter)(ide_drive_t *);
+
+ void (*fixup)(struct hwif_s *);
void (*ata_input_data)(ide_drive_t *, void *, u32);
void (*ata_output_data)(ide_drive_t *, void *, u32);
void (*dma_exec_cmd)(ide_drive_t *, u8);
void (*dma_start)(ide_drive_t *);
int (*ide_dma_end)(ide_drive_t *drive);
- int (*ide_dma_check)(ide_drive_t *drive);
int (*ide_dma_on)(ide_drive_t *drive);
- int (*ide_dma_off_quietly)(ide_drive_t *drive);
+ void (*dma_off_quietly)(ide_drive_t *drive);
int (*ide_dma_test_irq)(ide_drive_t *drive);
void (*ide_dma_clear_irq)(ide_drive_t *drive);
- int (*ide_dma_host_on)(ide_drive_t *drive);
- int (*ide_dma_host_off)(ide_drive_t *drive);
- int (*ide_dma_lostirq)(ide_drive_t *drive);
- int (*ide_dma_timeout)(ide_drive_t *drive);
+ void (*dma_host_on)(ide_drive_t *drive);
+ void (*dma_host_off)(ide_drive_t *drive);
+ void (*dma_lost_irq)(ide_drive_t *drive);
+ void (*dma_timeout)(ide_drive_t *drive);
void (*OUTB)(u8 addr, unsigned long port);
void (*OUTBSYNC)(ide_drive_t *drive, u8 addr, unsigned long port);
void (*OUTW)(u16 addr, unsigned long port);
- void (*OUTL)(u32 addr, unsigned long port);
void (*OUTSW)(unsigned long port, void *addr, u32 count);
void (*OUTSL)(unsigned long port, void *addr, u32 count);
u8 (*INB)(unsigned long port);
u16 (*INW)(unsigned long port);
- u32 (*INL)(unsigned long port);
void (*INSW)(unsigned long port, void *addr, u32 count);
void (*INSL)(unsigned long port, void *addr, u32 count);
unsigned int nsect;
unsigned int nleft;
- unsigned int cursg;
+ struct scatterlist *cursg;
unsigned int cursg_ofs;
- int mmio; /* hosts iomio (0) or custom (2) select */
int rqsize; /* max sectors per request */
int irq; /* our irq number */
unsigned serialized : 1; /* serialized all channel operation */
unsigned sharing_irq: 1; /* 1 = sharing irq with another hwif */
unsigned reset : 1; /* reset after probe */
- unsigned autodma : 1; /* auto-attempt using DMA at boot */
- unsigned udma_four : 1; /* 1=ATA-66 capable, 0=default */
- unsigned no_lba48 : 1; /* 1 = cannot do LBA48 */
- unsigned no_lba48_dma : 1; /* 1 = cannot do LBA48 DMA */
- unsigned no_dsc : 1; /* 0 default, 1 dsc_overlap disabled */
unsigned auto_poll : 1; /* supports nop auto-poll */
unsigned sg_mapped : 1; /* sg_table and sg_nents are ready */
unsigned no_io_32bit : 1; /* 1 = can not do 32-bit IO ops */
- unsigned err_stops_fifo : 1; /* 1=data FIFO is cleared by an error */
- unsigned atapi_irq_bogon : 1; /* Generates spurious DMA interrupts in PIO mode */
+ unsigned mmio : 1; /* host uses MMIO */
struct device gendev;
struct completion gendev_rel_comp; /* To deal with device release() */
/* for pci chipsets */
struct pci_dev *pci_dev;
- /* chipset device struct */
- struct ide_pci_device_s *cds;
/* current request */
struct request *rq;
int (*expiry)(ide_drive_t *);
/* ide_system_bus_speed */
int pio_clock;
+ int req_gen;
+ int req_gen_timer;
unsigned char cmd_buf[4];
} ide_hwgroup_t;
-/* structure attached to the request for IDE_TASK_CMDS */
+typedef struct ide_driver_s ide_driver_t;
+
+extern struct mutex ide_setting_mtx;
+int set_io_32bit(ide_drive_t *, int);
+int set_pio_mode(ide_drive_t *, int);
+int set_using_dma(ide_drive_t *, int);
+
+#ifdef CONFIG_IDE_PROC_FS
/*
* configurable drive settings
*/
#define TYPE_INT 0
-#define TYPE_INTA 1
-#define TYPE_BYTE 2
-#define TYPE_SHORT 3
+#define TYPE_BYTE 1
+#define TYPE_SHORT 2
#define SETTING_READ (1 << 0)
#define SETTING_WRITE (1 << 1)
typedef struct ide_settings_s {
char *name;
int rw;
- int read_ioctl;
- int write_ioctl;
int data_type;
int min;
int max;
struct ide_settings_s *next;
} ide_settings_t;
-extern struct semaphore ide_setting_sem;
-extern int ide_add_setting(ide_drive_t *drive, const char *name, int rw, int read_ioctl, int write_ioctl, int data_type, int min, int max, int mul_factor, int div_factor, void *data, ide_procset_t *set);
-extern ide_settings_t *ide_find_setting_by_name(ide_drive_t *drive, char *name);
-extern int ide_read_setting(ide_drive_t *t, ide_settings_t *setting);
-extern int ide_write_setting(ide_drive_t *drive, ide_settings_t *setting, int val);
-extern void ide_add_generic_settings(ide_drive_t *drive);
+int ide_add_setting(ide_drive_t *, const char *, int, int, int, int, int, int, void *, ide_procset_t *set);
/*
* /proc/ide interface
write_proc_t *write_proc;
} ide_proc_entry_t;
-#ifdef CONFIG_PROC_FS
-extern struct proc_dir_entry *proc_ide_root;
+void proc_ide_create(void);
+void proc_ide_destroy(void);
+void ide_proc_register_port(ide_hwif_t *);
+void ide_proc_unregister_port(ide_hwif_t *);
+void ide_proc_register_driver(ide_drive_t *, ide_driver_t *);
+void ide_proc_unregister_driver(ide_drive_t *, ide_driver_t *);
+
+void ide_add_generic_settings(ide_drive_t *);
-extern void proc_ide_create(void);
-extern void proc_ide_destroy(void);
-extern void create_proc_ide_interfaces(void);
-void destroy_proc_ide_interface(ide_hwif_t *);
-extern void ide_add_proc_entries(struct proc_dir_entry *, ide_proc_entry_t *, void *);
-extern void ide_remove_proc_entries(struct proc_dir_entry *, ide_proc_entry_t *);
read_proc_t proc_ide_read_capacity;
read_proc_t proc_ide_read_geometry;
return len; \
}
#else
-static inline void create_proc_ide_interfaces(void) { ; }
-static inline void destroy_proc_ide_interface(ide_hwif_t *hwif) { ; }
+static inline void proc_ide_create(void) { ; }
+static inline void proc_ide_destroy(void) { ; }
+static inline void ide_proc_register_port(ide_hwif_t *hwif) { ; }
+static inline void ide_proc_unregister_port(ide_hwif_t *hwif) { ; }
+static inline void ide_proc_register_driver(ide_drive_t *drive, ide_driver_t *driver) { ; }
+static inline void ide_proc_unregister_driver(ide_drive_t *drive, ide_driver_t *driver) { ; }
+static inline void ide_add_generic_settings(ide_drive_t *drive) { ; }
#define PROC_IDE_READ_RETURN(page,start,off,count,eof,len) return 0;
#endif
* The gendriver.owner field should be set to the module owner of this driver.
* The gendriver.name field should be set to the name of this driver
*/
-typedef struct ide_driver_s {
+struct ide_driver_s {
const char *version;
u8 media;
unsigned supports_dsc_overlap : 1;
int (*end_request)(ide_drive_t *, int, int);
ide_startstop_t (*error)(ide_drive_t *, struct request *rq, u8, u8);
ide_startstop_t (*abort)(ide_drive_t *, struct request *rq);
- ide_proc_entry_t *proc;
struct device_driver gen_driver;
int (*probe)(ide_drive_t *);
void (*remove)(ide_drive_t *);
+ void (*resume)(ide_drive_t *);
void (*shutdown)(ide_drive_t *);
-} ide_driver_t;
+#ifdef CONFIG_IDE_PROC_FS
+ ide_proc_entry_t *proc;
+#endif
+};
#define to_ide_driver(drv) container_of(drv, ide_driver_t, gen_driver)
int ide_end_dequeued_request(ide_drive_t *drive, struct request *rq,
int uptodate, int nr_sectors);
-/*
- * This is used on exit from the driver to designate the next irq handler
- * and also to start the safety timer.
- */
extern void ide_set_handler (ide_drive_t *drive, ide_handler_t *handler, unsigned int timeout, ide_expiry_t *expiry);
-/*
- * This is used on exit from the driver to designate the next irq handler
- * and start the safety time safely and atomically from the IRQ handler
- * with respect to the command issue (which it also does)
- */
extern void ide_execute_command(ide_drive_t *, task_ioreg_t cmd, ide_handler_t *, unsigned int, ide_expiry_t *);
ide_startstop_t __ide_error(ide_drive_t *, struct request *, u8, u8);
-/*
- * ide_error() takes action based on the error returned by the controller.
- * The caller should return immediately after invoking this.
- *
- * (drive, msg, status)
- */
ide_startstop_t ide_error (ide_drive_t *drive, const char *msg, byte stat);
ide_startstop_t __ide_abort(ide_drive_t *, struct request *);
-/*
- * Abort a running command on the controller triggering the abort
- * from a host side, non error situation
- * (drive, msg)
- */
extern ide_startstop_t ide_abort(ide_drive_t *, const char *);
extern void ide_fix_driveid(struct hd_driveid *);
*/
extern void ide_fixstring(u8 *, const int, const int);
-/*
- * This routine busy-waits for the drive status to be not "busy".
- * It then checks the status for all of the "good" bits and none
- * of the "bad" bits, and if all is okay it returns 0. All other
- * cases return 1 after doing "*startstop = ide_error()", and the
- * caller should return the updated value of "startstop" in this case.
- * "startstop" is unchanged when the function returns 0;
- * (startstop, drive, good, bad, timeout)
- */
-extern int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long);
+int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long);
-/*
- * Start a reset operation for an IDE interface.
- * The caller should return immediately after invoking this.
- */
extern ide_startstop_t ide_do_reset (ide_drive_t *);
-/*
- * This function is intended to be used prior to invoking ide_do_drive_cmd().
- */
extern void ide_init_drive_cmd (struct request *rq);
/*
- * this function returns error location sector offset in case of a write error
- */
-extern u64 ide_get_error_location(ide_drive_t *, char *);
-
-/*
* "action" parameter type for ide_do_drive_cmd() below.
*/
typedef enum {
extern int ide_do_drive_cmd(ide_drive_t *, struct request *, ide_action_t);
-/*
- * Clean up after success/failure of an explicit drive cmd.
- * stat/err are used only when (HWGROUP(drive)->rq->cmd == IDE_DRIVE_CMD).
- * stat/err are used only when (HWGROUP(drive)->rq->cmd == IDE_DRIVE_TASK_MASK).
- *
- * (ide_drive_t *drive, u8 stat, u8 err)
- */
extern void ide_end_drive_cmd(ide_drive_t *, u8, u8);
/*
extern void QUIRK_LIST(ide_drive_t *);
extern int drive_is_ready(ide_drive_t *);
-extern int wait_for_ready(ide_drive_t *, int /* timeout */);
/*
* taskfile io for disks for now...and builds request from ide_ioctl
extern int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout);
-/*
- * ide_stall_queue() can be used by a drive to give excess bandwidth back
- * to the hwgroup by sleeping for timeout jiffies.
- */
extern void ide_stall_queue(ide_drive_t *drive, unsigned long timeout);
extern int ide_spin_wait_hwgroup(ide_drive_t *);
extern void ide_timer_expiry(unsigned long);
extern irqreturn_t ide_intr(int irq, void *dev_id);
-extern void do_ide_request(request_queue_t *);
+extern void do_ide_request(struct request_queue *);
void ide_init_disk(struct gendisk *, ide_drive_t *);
extern int ideprobe_init(void);
+#ifdef CONFIG_IDEPCI_PCIBUS_ORDER
extern void ide_scan_pcibus(int scan_direction) __init;
extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *owner, const char *mod_name);
#define ide_pci_register_driver(d) __ide_pci_register_driver(d, THIS_MODULE, KBUILD_MODNAME)
-void ide_pci_setup_ports(struct pci_dev *, struct ide_pci_device_s *, int, ata_index_t *);
-extern void ide_setup_pci_noise (struct pci_dev *dev, struct ide_pci_device_s *d);
+#else
+#define ide_pci_register_driver(d) pci_register_driver(d)
+#endif
+
+void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *, int, u8 *);
+void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *);
extern void default_hwif_iops(ide_hwif_t *);
extern void default_hwif_mmiops(ide_hwif_t *);
extern void default_hwif_transport(ide_hwif_t *);
-void ide_register_subdriver(ide_drive_t *, ide_driver_t *);
-void ide_unregister_subdriver(ide_drive_t *, ide_driver_t *);
-
-#define ON_BOARD 1
-#define NEVER_BOARD 0
-
-#ifdef CONFIG_BLK_DEV_OFFBOARD
-# define OFF_BOARD ON_BOARD
-#else /* CONFIG_BLK_DEV_OFFBOARD */
-# define OFF_BOARD NEVER_BOARD
-#endif /* CONFIG_BLK_DEV_OFFBOARD */
-
-#define NODMA 0
-#define NOAUTODMA 1
-#define AUTODMA 2
-
typedef struct ide_pci_enablebit_s {
u8 reg; /* byte pci reg holding the enable-bit */
u8 mask; /* mask to isolate the enable-bit */
enum {
/* Uses ISA control ports not PCI ones. */
- IDEPCI_FLAG_ISA_PORTS = (1 << 0),
+ IDE_HFLAG_ISA_PORTS = (1 << 0),
+ /* single port device */
+ IDE_HFLAG_SINGLE = (1 << 1),
+ /* don't use legacy PIO blacklist */
+ IDE_HFLAG_PIO_NO_BLACKLIST = (1 << 2),
+ /* don't use conservative PIO "downgrade" */
+ IDE_HFLAG_PIO_NO_DOWNGRADE = (1 << 3),
+ /* use PIO8/9 for prefetch off/on */
+ IDE_HFLAG_ABUSE_PREFETCH = (1 << 4),
+ /* use PIO6/7 for fast-devsel off/on */
+ IDE_HFLAG_ABUSE_FAST_DEVSEL = (1 << 5),
+ /* use 100-102 and 200-202 PIO values to set DMA modes */
+ IDE_HFLAG_ABUSE_DMA_MODES = (1 << 6),
+ /*
+ * keep DMA setting when programming PIO mode, may be used only
+ * for hosts which have separate PIO and DMA timings (ie. PMAC)
+ */
+ IDE_HFLAG_SET_PIO_MODE_KEEP_DMA = (1 << 7),
+ /* program host for the transfer mode after programming device */
+ IDE_HFLAG_POST_SET_MODE = (1 << 8),
+ /* don't program host/device for the transfer mode ("smart" hosts) */
+ IDE_HFLAG_NO_SET_MODE = (1 << 9),
+ /* trust BIOS for programming chipset/device for DMA */
+ IDE_HFLAG_TRUST_BIOS_FOR_DMA = (1 << 10),
+ /* host uses VDMA */
+ IDE_HFLAG_VDMA = (1 << 11),
+ /* ATAPI DMA is unsupported */
+ IDE_HFLAG_NO_ATAPI_DMA = (1 << 12),
+ /* set if host is a "bootable" controller */
+ IDE_HFLAG_BOOTABLE = (1 << 13),
+ /* host doesn't support DMA */
+ IDE_HFLAG_NO_DMA = (1 << 14),
+ /* check if host is PCI IDE device before allowing DMA */
+ IDE_HFLAG_NO_AUTODMA = (1 << 15),
+ /* host is CS5510/CS5520 */
+ IDE_HFLAG_CS5520 = (1 << 16),
+ /* no LBA48 */
+ IDE_HFLAG_NO_LBA48 = (1 << 17),
+ /* no LBA48 DMA */
+ IDE_HFLAG_NO_LBA48_DMA = (1 << 18),
+ /* data FIFO is cleared by an error */
+ IDE_HFLAG_ERROR_STOPS_FIFO = (1 << 19),
+ /* serialize ports */
+ IDE_HFLAG_SERIALIZE = (1 << 20),
+ /* use legacy IRQs */
+ IDE_HFLAG_LEGACY_IRQS = (1 << 21),
+ /* force use of legacy IRQs */
+ IDE_HFLAG_FORCE_LEGACY_IRQS = (1 << 22),
+ /* limit LBA48 requests to 256 sectors */
+ IDE_HFLAG_RQSIZE_256 = (1 << 23),
+ /* use 32-bit I/O ops */
+ IDE_HFLAG_IO_32BIT = (1 << 24),
+ /* unmask IRQs */
+ IDE_HFLAG_UNMASK_IRQS = (1 << 25),
};
-typedef struct ide_pci_device_s {
+#ifdef CONFIG_BLK_DEV_OFFBOARD
+# define IDE_HFLAG_OFF_BOARD IDE_HFLAG_BOOTABLE
+#else
+# define IDE_HFLAG_OFF_BOARD 0
+#endif
+
+struct ide_port_info {
char *name;
- int (*init_setup)(struct pci_dev *, struct ide_pci_device_s *);
- void (*init_setup_dma)(struct pci_dev *, struct ide_pci_device_s *, ide_hwif_t *);
unsigned int (*init_chipset)(struct pci_dev *, const char *);
void (*init_iops)(ide_hwif_t *);
void (*init_hwif)(ide_hwif_t *);
void (*init_dma)(ide_hwif_t *, unsigned long);
void (*fixup)(ide_hwif_t *);
- u8 channels;
- u8 autodma;
ide_pci_enablebit_t enablebits[2];
- u8 bootable;
+ hwif_chipset_t chipset;
unsigned int extra;
- struct ide_pci_device_s *next;
- u8 flags;
-} ide_pci_device_t;
+ u32 host_flags;
+ u8 pio_mask;
+ u8 swdma_mask;
+ u8 mwdma_mask;
+ u8 udma_mask;
+};
-extern int ide_setup_pci_device(struct pci_dev *, ide_pci_device_t *);
-extern int ide_setup_pci_devices(struct pci_dev *, struct pci_dev *, ide_pci_device_t *);
+int ide_setup_pci_device(struct pci_dev *, const struct ide_port_info *);
+int ide_setup_pci_devices(struct pci_dev *, struct pci_dev *, const struct ide_port_info *);
void ide_map_sg(ide_drive_t *, struct request *);
void ide_init_sg_cmd(ide_drive_t *, struct request *);
#define BAD_DMA_DRIVE 0
#define GOOD_DMA_DRIVE 1
-#ifdef CONFIG_BLK_DEV_IDEDMA
struct drive_list_entry {
const char *id_model;
const char *id_firmware;
};
int ide_in_drive_list(struct hd_driveid *, const struct drive_list_entry *);
+
+#ifdef CONFIG_BLK_DEV_IDEDMA
int __ide_dma_bad_drive(ide_drive_t *);
-int __ide_dma_good_drive(ide_drive_t *);
-int ide_use_dma(ide_drive_t *);
-int __ide_dma_off(ide_drive_t *);
+
+u8 ide_find_dma_mode(ide_drive_t *, u8);
+
+static inline u8 ide_max_dma_mode(ide_drive_t *drive)
+{
+ return ide_find_dma_mode(drive, XFER_UDMA_6);
+}
+
+void ide_dma_off(ide_drive_t *);
void ide_dma_verbose(ide_drive_t *);
+int ide_set_dma(ide_drive_t *);
ide_startstop_t ide_dma_intr(ide_drive_t *);
#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
extern int ide_release_dma(ide_hwif_t *);
extern void ide_setup_dma(ide_hwif_t *, unsigned long, unsigned int);
-extern int __ide_dma_host_off(ide_drive_t *);
-extern int __ide_dma_off_quietly(ide_drive_t *);
-extern int __ide_dma_host_on(ide_drive_t *);
+void ide_dma_host_off(ide_drive_t *);
+void ide_dma_off_quietly(ide_drive_t *);
+void ide_dma_host_on(ide_drive_t *);
extern int __ide_dma_on(ide_drive_t *);
-extern int __ide_dma_check(ide_drive_t *);
extern int ide_dma_setup(ide_drive_t *);
extern void ide_dma_start(ide_drive_t *);
extern int __ide_dma_end(ide_drive_t *);
-extern int __ide_dma_lostirq(ide_drive_t *);
-extern int __ide_dma_timeout(ide_drive_t *);
+extern void ide_dma_lost_irq(ide_drive_t *);
+extern void ide_dma_timeout(ide_drive_t *);
#endif /* CONFIG_BLK_DEV_IDEDMA_PCI */
#else
-static inline int ide_use_dma(ide_drive_t *drive) { return 0; }
-static inline int __ide_dma_off(ide_drive_t *drive) { return 0; }
+static inline u8 ide_find_dma_mode(ide_drive_t *drive, u8 speed) { return 0; }
+static inline u8 ide_max_dma_mode(ide_drive_t *drive) { return 0; }
+static inline void ide_dma_off(ide_drive_t *drive) { ; }
static inline void ide_dma_verbose(ide_drive_t *drive) { ; }
+static inline int ide_set_dma(ide_drive_t *drive) { return 1; }
#endif /* CONFIG_BLK_DEV_IDEDMA */
#ifndef CONFIG_BLK_DEV_IDEDMA_PCI
extern void ide_acpi_get_timing(ide_hwif_t *hwif);
extern void ide_acpi_push_timing(ide_hwif_t *hwif);
extern void ide_acpi_init(ide_hwif_t *hwif);
+extern void ide_acpi_set_state(ide_hwif_t *hwif, int on);
#else
static inline int ide_acpi_exec_tfs(ide_drive_t *drive) { return 0; }
static inline void ide_acpi_get_timing(ide_hwif_t *hwif) { ; }
static inline void ide_acpi_push_timing(ide_hwif_t *hwif) { ; }
static inline void ide_acpi_init(ide_hwif_t *hwif) { ; }
+static inline void ide_acpi_set_state(ide_hwif_t *hwif, int on) {}
#endif
extern int ide_hwif_request_regions(ide_hwif_t *hwif);
void ide_undecoded_slave(ide_hwif_t *);
-int probe_hwif_init_with_fixup(ide_hwif_t *, void (*)(ide_hwif_t *));
-extern int probe_hwif_init(ide_hwif_t *);
+int ide_device_add(u8 idx[4]);
static inline void *ide_get_hwifdata (ide_hwif_t * hwif)
{
}
/* ide-lib.c */
-extern u8 ide_dma_speed(ide_drive_t *drive, u8 mode);
-extern u8 ide_rate_filter(u8 mode, u8 speed);
-extern int ide_dma_enable(ide_drive_t *drive);
extern char *ide_xfer_verbose(u8 xfer_rate);
extern void ide_toggle_bounce(ide_drive_t *drive, int on);
extern int ide_set_xfer_rate(ide_drive_t *drive, u8 rate);
+static inline int ide_dev_has_iordy(struct hd_driveid *id)
+{
+ return ((id->field_valid & 2) && (id->capability & 8)) ? 1 : 0;
+}
+
+static inline int ide_dev_is_sata(struct hd_driveid *id)
+{
+ /*
+ * See if word 93 is 0 AND drive is at least ATA-5 compatible
+ * verifying that word 80 by casting it to a signed type --
+ * this trick allows us to filter out the reserved values of
+ * 0x0000 and 0xffff along with the earlier ATA revisions...
+ */
+ if (id->hw_config == 0 && (short)id->major_rev_num >= 0x0020)
+ return 1;
+ return 0;
+}
+
u8 ide_dump_status(ide_drive_t *, const char *, u8);
typedef struct ide_pio_timings_s {
int setup_time; /* Address setup (ns) minimum */
int active_time; /* Active pulse (ns) minimum */
- int cycle_time; /* Cycle time (ns) minimum = (setup + active + recovery) */
+ int cycle_time; /* Cycle time (ns) minimum = */
+ /* active + recovery (+ setup for some chips) */
} ide_pio_timings_t;
-typedef struct ide_pio_data_s {
- u8 pio_mode;
- u8 use_iordy;
- u8 overridden;
- u8 blacklisted;
- unsigned int cycle_time;
-} ide_pio_data_t;
-
-extern u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode, ide_pio_data_t *d);
+unsigned int ide_pio_cycle_time(ide_drive_t *, u8);
+u8 ide_get_best_pio_mode(ide_drive_t *, u8, u8);
extern const ide_pio_timings_t ide_pio_timings[6];
+int ide_set_pio_mode(ide_drive_t *, u8);
+int ide_set_dma_mode(ide_drive_t *, u8);
+
+void ide_set_pio(ide_drive_t *, u8);
+
+static inline void ide_set_max_pio(ide_drive_t *drive)
+{
+ ide_set_pio(drive, 255);
+}
extern spinlock_t ide_lock;
-extern struct semaphore ide_cfg_sem;
+extern struct mutex ide_cfg_mtx;
/*
* Structure locking:
*
- * ide_cfg_sem and ide_lock together protect changes to
+ * ide_cfg_mtx and ide_lock together protect changes to
* ide_hwif_t->{next,hwgroup}
* ide_drive_t->next
*
return dev ? pcibus_to_node(dev->bus) : -1;
}
+static inline ide_drive_t *ide_get_paired_drive(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+
+ return &hwif->drives[(drive->dn ^ 1) & 1];
+}
+
#endif /* _IDE_H */
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff