#define ERROR_RECAL 1 /* Recalibrate every 2nd retry */
/*
- * Tune flags
- */
-#define IDE_TUNE_NOAUTO 2
-#define IDE_TUNE_AUTO 1
-#define IDE_TUNE_DEFAULT 0
-
-/*
* state flags
*/
*/
#define IDE_NR_PORTS (10)
-#define IDE_DATA_OFFSET (0)
-#define IDE_ERROR_OFFSET (1)
-#define IDE_NSECTOR_OFFSET (2)
-#define IDE_SECTOR_OFFSET (3)
-#define IDE_LCYL_OFFSET (4)
-#define IDE_HCYL_OFFSET (5)
-#define IDE_SELECT_OFFSET (6)
-#define IDE_STATUS_OFFSET (7)
-#define IDE_CONTROL_OFFSET (8)
-#define IDE_IRQ_OFFSET (9)
-
-#define IDE_FEATURE_OFFSET IDE_ERROR_OFFSET
-#define IDE_COMMAND_OFFSET IDE_STATUS_OFFSET
-#define IDE_ALTSTATUS_OFFSET IDE_CONTROL_OFFSET
-#define IDE_IREASON_OFFSET IDE_NSECTOR_OFFSET
-#define IDE_BCOUNTL_OFFSET IDE_LCYL_OFFSET
-#define IDE_BCOUNTH_OFFSET IDE_HCYL_OFFSET
+struct ide_io_ports {
+ unsigned long data_addr;
+
+ union {
+ unsigned long error_addr; /* read: error */
+ unsigned long feature_addr; /* write: feature */
+ };
+
+ unsigned long nsect_addr;
+ unsigned long lbal_addr;
+ unsigned long lbam_addr;
+ unsigned long lbah_addr;
+
+ unsigned long device_addr;
+
+ union {
+ unsigned long status_addr; /* read: status */
+ unsigned long command_addr; /* write: command */
+ };
+
+ unsigned long ctl_addr;
+
+ unsigned long irq_addr;
+};
#define OK_STAT(stat,good,bad) (((stat)&((good)|(bad)))==(good))
#define BAD_R_STAT (BUSY_STAT | ERR_STAT)
#define WAIT_MIN_SLEEP (2*HZ/100) /* 20msec - minimum sleep time */
/*
+ * Op codes for special requests to be handled by ide_special_rq().
+ * Values should be in the range of 0x20 to 0x3f.
+ */
+#define REQ_DRIVE_RESET 0x20
+
+/*
* Check for an interrupt and acknowledge the interrupt status
*/
struct hwif_s;
ide_qd65xx, ide_umc8672, ide_ht6560b,
ide_rz1000, ide_trm290,
ide_cmd646, ide_cy82c693, ide_4drives,
- ide_pmac, ide_etrax100, ide_acorn,
+ ide_pmac, ide_acorn,
ide_au1xxx, ide_palm3710
};
* Structure to hold all information about the location of this port
*/
typedef struct hw_regs_s {
- unsigned long io_ports[IDE_NR_PORTS]; /* task file registers */
+ union {
+ struct ide_io_ports io_ports;
+ unsigned long io_ports_array[IDE_NR_PORTS];
+ };
+
int irq; /* our irq number */
ide_ack_intr_t *ack_intr; /* acknowledge interrupt */
hwif_chipset_t chipset;
- struct device *dev;
+ struct device *dev, *parent;
+ unsigned long config;
} hw_regs_t;
void ide_init_port_data(struct hwif_s *, unsigned int);
{
unsigned int i;
- for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++)
- hw->io_ports[i] = io_addr++;
+ for (i = 0; i <= 7; i++)
+ hw->io_ports_array[i] = io_addr++;
- hw->io_ports[IDE_CONTROL_OFFSET] = ctl_addr;
+ hw->io_ports.ctl_addr = ctl_addr;
}
-#include <asm/ide.h>
+/* for IDE PCI controllers in legacy mode, temporary */
+static inline int __ide_default_irq(unsigned long base)
+{
+ switch (base) {
+#ifdef CONFIG_IA64
+ case 0x1f0: return isa_irq_to_vector(14);
+ case 0x170: return isa_irq_to_vector(15);
+#else
+ case 0x1f0: return 14;
+ case 0x170: return 15;
+#endif
+ }
+ return 0;
+}
-#if !defined(MAX_HWIFS) || defined(CONFIG_EMBEDDED)
-#undef MAX_HWIFS
-#define MAX_HWIFS CONFIG_IDE_MAX_HWIFS
+#if defined(CONFIG_ARM) || defined(CONFIG_FRV) || defined(CONFIG_M68K) || \
+ defined(CONFIG_MIPS) || defined(CONFIG_MN10300) || defined(CONFIG_PARISC) \
+ || defined(CONFIG_PPC) || defined(CONFIG_SPARC) || defined(CONFIG_SPARC64)
+#include <asm/ide.h>
+#else
+#include <asm-generic/ide_iops.h>
#endif
+#define MAX_HWIFS 10
+
/* Currently only m68k, apus and m8xx need it */
#ifndef IDE_ARCH_ACK_INTR
# define ide_ack_intr(hwif) (1)
struct ide_acpi_hwif_link;
#endif
-typedef struct ide_drive_s {
+/* ATAPI device flags */
+enum {
+ IDE_AFLAG_DRQ_INTERRUPT = (1 << 0),
+ IDE_AFLAG_MEDIA_CHANGED = (1 << 1),
+
+ /* ide-cd */
+ /* Drive cannot lock the door. */
+ IDE_AFLAG_NO_DOORLOCK = (1 << 2),
+ /* Drive cannot eject the disc. */
+ IDE_AFLAG_NO_EJECT = (1 << 3),
+ /* Drive is a pre ATAPI 1.2 drive. */
+ IDE_AFLAG_PRE_ATAPI12 = (1 << 4),
+ /* TOC addresses are in BCD. */
+ IDE_AFLAG_TOCADDR_AS_BCD = (1 << 5),
+ /* TOC track numbers are in BCD. */
+ IDE_AFLAG_TOCTRACKS_AS_BCD = (1 << 6),
+ /*
+ * Drive does not provide data in multiples of SECTOR_SIZE
+ * when more than one interrupt is needed.
+ */
+ IDE_AFLAG_LIMIT_NFRAMES = (1 << 7),
+ /* Seeking in progress. */
+ IDE_AFLAG_SEEKING = (1 << 8),
+ /* Saved TOC information is current. */
+ IDE_AFLAG_TOC_VALID = (1 << 9),
+ /* We think that the drive door is locked. */
+ IDE_AFLAG_DOOR_LOCKED = (1 << 10),
+ /* SET_CD_SPEED command is unsupported. */
+ IDE_AFLAG_NO_SPEED_SELECT = (1 << 11),
+ IDE_AFLAG_VERTOS_300_SSD = (1 << 12),
+ IDE_AFLAG_VERTOS_600_ESD = (1 << 13),
+ IDE_AFLAG_SANYO_3CD = (1 << 14),
+ IDE_AFLAG_FULL_CAPS_PAGE = (1 << 15),
+ IDE_AFLAG_PLAY_AUDIO_OK = (1 << 16),
+ IDE_AFLAG_LE_SPEED_FIELDS = (1 << 17),
+
+ /* ide-floppy */
+ /* Format in progress */
+ IDE_AFLAG_FORMAT_IN_PROGRESS = (1 << 18),
+ /* Avoid commands not supported in Clik drive */
+ IDE_AFLAG_CLIK_DRIVE = (1 << 19),
+ /* Requires BH algorithm for packets */
+ IDE_AFLAG_ZIP_DRIVE = (1 << 20),
+
+ /* ide-tape */
+ IDE_AFLAG_IGNORE_DSC = (1 << 21),
+ /* 0 When the tape position is unknown */
+ IDE_AFLAG_ADDRESS_VALID = (1 << 22),
+ /* Device already opened */
+ IDE_AFLAG_BUSY = (1 << 23),
+ /* Attempt to auto-detect the current user block size */
+ IDE_AFLAG_DETECT_BS = (1 << 24),
+ /* Currently on a filemark */
+ IDE_AFLAG_FILEMARK = (1 << 25),
+ /* 0 = no tape is loaded, so we don't rewind after ejecting */
+ IDE_AFLAG_MEDIUM_PRESENT = (1 << 26)
+};
+
+struct ide_drive_s {
char name[4]; /* drive name, such as "hda" */
char driver_req[10]; /* requests specific driver */
unsigned atapi_overlap : 1; /* ATAPI overlap (not supported) */
unsigned doorlocking : 1; /* for removable only: door lock/unlock works */
unsigned nodma : 1; /* disallow DMA */
- unsigned autotune : 2; /* 0=default, 1=autotune, 2=noautotune */
unsigned remap_0_to_1 : 1; /* 0=noremap, 1=remap 0->1 (for EZDrive) */
unsigned blocked : 1; /* 1=powermanagment told us not to do anything, so sleep nicely */
- unsigned vdma : 1; /* 1=doing PIO over DMA 0=doing normal DMA */
unsigned scsi : 1; /* 0=default, 1=ide-scsi emulation */
unsigned sleeping : 1; /* 1=sleeping & sleep field valid */
unsigned post_reset : 1;
u8 wcache; /* status of write cache */
u8 acoustic; /* acoustic management */
u8 media; /* disk, cdrom, tape, floppy, ... */
- u8 ctl; /* "normal" value for Control register */
u8 ready_stat; /* min status value for drive ready */
u8 mult_count; /* current multiple sector setting */
u8 mult_req; /* requested multiple sector setting */
struct list_head list;
struct device gendev;
struct completion gendev_rel_comp; /* to deal with device release() */
-} ide_drive_t;
+
+ /* callback for packet commands */
+ void (*pc_callback)(struct ide_drive_s *);
+
+ unsigned long atapi_flags;
+};
+
+typedef struct ide_drive_s ide_drive_t;
#define to_ide_device(dev)container_of(dev, ide_drive_t, gendev)
((1<<ide_pci)|(1<<ide_cmd646)|(1<<ide_ali14xx))
#define IDE_CHIPSET_IS_PCI(c) ((IDE_CHIPSET_PCI_MASK >> (c)) & 1)
+struct ide_task_s;
struct ide_port_info;
+struct ide_tp_ops {
+ void (*exec_command)(struct hwif_s *, u8);
+ u8 (*read_status)(struct hwif_s *);
+ u8 (*read_altstatus)(struct hwif_s *);
+ u8 (*read_sff_dma_status)(struct hwif_s *);
+
+ void (*set_irq)(struct hwif_s *, int);
+
+ void (*tf_load)(ide_drive_t *, struct ide_task_s *);
+ void (*tf_read)(ide_drive_t *, struct ide_task_s *);
+
+ void (*input_data)(ide_drive_t *, struct request *, void *,
+ unsigned int);
+ void (*output_data)(ide_drive_t *, struct request *, void *,
+ unsigned int);
+};
+
+extern const struct ide_tp_ops default_tp_ops;
+
+/**
+ * struct ide_port_ops - IDE port operations
+ *
+ * @init_dev: host specific initialization of a device
+ * @set_pio_mode: routine to program host for PIO mode
+ * @set_dma_mode: routine to program host for DMA mode
+ * @selectproc: tweaks hardware to select drive
+ * @reset_poll: chipset polling based on hba specifics
+ * @pre_reset: chipset specific changes to default for device-hba resets
+ * @resetproc: routine to reset controller after a disk reset
+ * @maskproc: special host masking for drive selection
+ * @quirkproc: check host's drive quirk list
+ *
+ * @mdma_filter: filter MDMA modes
+ * @udma_filter: filter UDMA modes
+ *
+ * @cable_detect: detect cable type
+ */
struct ide_port_ops {
- /* host specific initialization of devices on a port */
- void (*port_init_devs)(struct hwif_s *);
- /* routine to program host for PIO mode */
+ void (*init_dev)(ide_drive_t *);
void (*set_pio_mode)(ide_drive_t *, const u8);
- /* routine to program host for DMA mode */
void (*set_dma_mode)(ide_drive_t *, const u8);
- /* tweaks hardware to select drive */
void (*selectproc)(ide_drive_t *);
- /* chipset polling based on hba specifics */
int (*reset_poll)(ide_drive_t *);
- /* chipset specific changes to default for device-hba resets */
void (*pre_reset)(ide_drive_t *);
- /* routine to reset controller after a disk reset */
void (*resetproc)(ide_drive_t *);
- /* special host masking for drive selection */
void (*maskproc)(ide_drive_t *, int);
- /* check host's drive quirk list */
void (*quirkproc)(ide_drive_t *);
u8 (*mdma_filter)(ide_drive_t *);
void (*dma_timeout)(struct ide_drive_s *);
};
+struct ide_host;
+
typedef struct hwif_s {
struct hwif_s *next; /* for linked-list in ide_hwgroup_t */
struct hwif_s *mate; /* other hwif from same PCI chip */
struct hwgroup_s *hwgroup; /* actually (ide_hwgroup_t *) */
struct proc_dir_entry *proc; /* /proc/ide/ directory entry */
+ struct ide_host *host;
+
char name[6]; /* name of interface, eg. "ide0" */
- /* task file registers for pata and sata */
- unsigned long io_ports[IDE_NR_PORTS];
+ struct ide_io_ports io_ports;
+
unsigned long sata_scr[SATA_NR_PORTS];
ide_drive_t drives[MAX_DRIVES]; /* drive info */
void (*rw_disk)(ide_drive_t *, struct request *);
+ const struct ide_tp_ops *tp_ops;
const struct ide_port_ops *port_ops;
- struct ide_dma_ops *dma_ops;
-
- void (*ata_input_data)(ide_drive_t *, void *, u32);
- void (*ata_output_data)(ide_drive_t *, void *, u32);
-
- void (*atapi_input_bytes)(ide_drive_t *, void *, u32);
- void (*atapi_output_bytes)(ide_drive_t *, void *, u32);
+ const struct ide_dma_ops *dma_ops;
void (*ide_dma_clear_irq)(ide_drive_t *drive);
- void (*OUTB)(u8 addr, unsigned long port);
- void (*OUTBSYNC)(ide_drive_t *drive, u8 addr, unsigned long port);
- void (*OUTW)(u16 addr, unsigned long port);
- void (*OUTSW)(unsigned long port, void *addr, u32 count);
- void (*OUTSL)(unsigned long port, void *addr, u32 count);
-
- u8 (*INB)(unsigned long port);
- u16 (*INW)(unsigned long port);
- void (*INSW)(unsigned long port, void *addr, u32 count);
- void (*INSL)(unsigned long port, void *addr, u32 count);
-
/* dma physical region descriptor table (cpu view) */
unsigned int *dmatable_cpu;
/* dma physical region descriptor table (dma view) */
int irq; /* our irq number */
unsigned long dma_base; /* base addr for dma ports */
- unsigned long dma_command; /* dma command register */
- unsigned long dma_vendor1; /* dma vendor 1 register */
- unsigned long dma_status; /* dma status register */
- unsigned long dma_vendor3; /* dma vendor 3 register */
- unsigned long dma_prdtable; /* actual prd table address */
unsigned long config_data; /* for use by chipset-specific code */
unsigned long select_data; /* for use by chipset-specific code */
unsigned present : 1; /* this interface exists */
unsigned serialized : 1; /* serialized all channel operation */
unsigned sharing_irq: 1; /* 1 = sharing irq with another hwif */
- unsigned reset : 1; /* reset after probe */
unsigned sg_mapped : 1; /* sg_table and sg_nents are ready */
- unsigned mmio : 1; /* host uses MMIO */
struct device gendev;
struct device *portdev;
#endif
} ____cacheline_internodealigned_in_smp ide_hwif_t;
+struct ide_host {
+ ide_hwif_t *ports[MAX_HWIFS];
+ unsigned int n_ports;
+ struct device *dev[2];
+ unsigned long host_flags;
+ void *host_priv;
+};
+
/*
* internal ide interrupt handler type
*/
typedef int (ide_expiry_t)(ide_drive_t *);
/* used by ide-cd, ide-floppy, etc. */
-typedef void (xfer_func_t)(ide_drive_t *, void *, u32);
+typedef void (xfer_func_t)(ide_drive_t *, struct request *rq, void *, unsigned);
typedef struct hwgroup_s {
/* irq handler, if active */
unsigned int sleeping : 1;
/* BOOL: polling active & poll_timeout field valid */
unsigned int polling : 1;
- /* BOOL: in a polling reset situation. Must not trigger another reset yet */
- unsigned int resetting : 1;
/* current drive */
ide_drive_t *drive;
PC_FLAG_SUPPRESS_ERROR = (1 << 1),
PC_FLAG_WAIT_FOR_DSC = (1 << 2),
PC_FLAG_DMA_OK = (1 << 3),
- PC_FLAG_DMA_RECOMMENDED = (1 << 4),
- PC_FLAG_DMA_IN_PROGRESS = (1 << 5),
- PC_FLAG_DMA_ERROR = (1 << 6),
- PC_FLAG_WRITING = (1 << 7),
+ PC_FLAG_DMA_IN_PROGRESS = (1 << 4),
+ PC_FLAG_DMA_ERROR = (1 << 5),
+ PC_FLAG_WRITING = (1 << 6),
/* command timed out */
- PC_FLAG_TIMEDOUT = (1 << 8),
+ PC_FLAG_TIMEDOUT = (1 << 7),
};
struct ide_atapi_pc {
* to change/removal later.
*/
u8 pc_buf[256];
- void (*idefloppy_callback) (ide_drive_t *);
- ide_startstop_t (*idetape_callback) (ide_drive_t *);
/* idetape only */
struct idetape_bh *bh;
read_proc_t proc_ide_read_capacity;
read_proc_t proc_ide_read_geometry;
-#ifdef CONFIG_BLK_DEV_IDEPCI
-void ide_pci_create_host_proc(const char *, get_info_t *);
-#endif
-
/*
* Standard exit stuff:
*/
ide_startstop_t (*do_request)(ide_drive_t *, struct request *, sector_t);
int (*end_request)(ide_drive_t *, int, int);
ide_startstop_t (*error)(ide_drive_t *, struct request *rq, u8, u8);
- ide_startstop_t (*abort)(ide_drive_t *, struct request *rq);
struct device_driver gen_driver;
int (*probe)(ide_drive_t *);
void (*remove)(ide_drive_t *);
#define to_ide_driver(drv) container_of(drv, ide_driver_t, gen_driver)
-int generic_ide_ioctl(ide_drive_t *, struct file *, struct block_device *, unsigned, unsigned long);
+int ide_device_get(ide_drive_t *);
+void ide_device_put(ide_drive_t *);
-/*
- * ide_hwifs[] is the master data structure used to keep track
- * of just about everything in ide.c. Whenever possible, routines
- * should be using pointers to a drive (ide_drive_t *) or
- * pointers to a hwif (ide_hwif_t *), rather than indexing this
- * structure directly (the allocation/layout may change!).
- *
- */
-#ifndef _IDE_C
-extern ide_hwif_t ide_hwifs[]; /* master data repository */
-#endif
-extern int noautodma;
-
-ide_hwif_t *ide_find_port_slot(const struct ide_port_info *);
+int generic_ide_ioctl(ide_drive_t *, struct file *, struct block_device *, unsigned, unsigned long);
-static inline ide_hwif_t *ide_find_port(void)
-{
- return ide_find_port_slot(NULL);
-}
+extern int ide_vlb_clk;
+extern int ide_pci_clk;
extern int ide_end_request (ide_drive_t *drive, int uptodate, int nrsecs);
int ide_end_dequeued_request(ide_drive_t *drive, struct request *rq,
void ide_execute_command(ide_drive_t *, u8, ide_handler_t *, unsigned int,
ide_expiry_t *);
-ide_startstop_t __ide_error(ide_drive_t *, struct request *, u8, u8);
+void ide_execute_pkt_cmd(ide_drive_t *);
-ide_startstop_t ide_error (ide_drive_t *drive, const char *msg, byte stat);
+void ide_pad_transfer(ide_drive_t *, int, int);
-ide_startstop_t __ide_abort(ide_drive_t *, struct request *);
+ide_startstop_t __ide_error(ide_drive_t *, struct request *, u8, u8);
-extern ide_startstop_t ide_abort(ide_drive_t *, const char *);
+ide_startstop_t ide_error (ide_drive_t *drive, const char *msg, byte stat);
extern void ide_fix_driveid(struct hd_driveid *);
extern ide_startstop_t ide_do_reset (ide_drive_t *);
-extern void ide_init_drive_cmd (struct request *rq);
-
-/*
- * "action" parameter type for ide_do_drive_cmd() below.
- */
-typedef enum {
- ide_wait, /* insert rq at end of list, and wait for it */
- ide_preempt, /* insert rq in front of current request */
- ide_head_wait, /* insert rq in front of current request and wait for it */
- ide_end /* insert rq at end of list, but don't wait for it */
-} ide_action_t;
-
-extern int ide_do_drive_cmd(ide_drive_t *, struct request *, ide_action_t);
+extern void ide_do_drive_cmd(ide_drive_t *, struct request *);
extern void ide_end_drive_cmd(ide_drive_t *, u8, u8);
enum {
IDE_TFLAG_LBA48 = (1 << 0),
- IDE_TFLAG_NO_SELECT_MASK = (1 << 1),
IDE_TFLAG_FLAGGED = (1 << 2),
IDE_TFLAG_OUT_DATA = (1 << 3),
IDE_TFLAG_OUT_HOB_FEATURE = (1 << 4),
IDE_TFLAG_IN_HOB = IDE_TFLAG_IN_HOB_FEATURE |
IDE_TFLAG_IN_HOB_NSECT |
IDE_TFLAG_IN_HOB_LBA,
+ IDE_TFLAG_IN_FEATURE = (1 << 1),
IDE_TFLAG_IN_NSECT = (1 << 25),
IDE_TFLAG_IN_LBAL = (1 << 26),
IDE_TFLAG_IN_LBAM = (1 << 27),
void *special; /* valid_t generally */
} ide_task_t;
+void ide_tf_dump(const char *, struct ide_taskfile *);
+
+void ide_exec_command(ide_hwif_t *, u8);
+u8 ide_read_status(ide_hwif_t *);
+u8 ide_read_altstatus(ide_hwif_t *);
+u8 ide_read_sff_dma_status(ide_hwif_t *);
+
+void ide_set_irq(ide_hwif_t *, int);
+
void ide_tf_load(ide_drive_t *, ide_task_t *);
void ide_tf_read(ide_drive_t *, ide_task_t *);
+void ide_input_data(ide_drive_t *, struct request *, void *, unsigned int);
+void ide_output_data(ide_drive_t *, struct request *, void *, unsigned int);
+
extern void SELECT_DRIVE(ide_drive_t *);
-extern void SELECT_MASK(ide_drive_t *, int);
+void SELECT_MASK(ide_drive_t *, int);
+
+u8 ide_read_error(ide_drive_t *);
+void ide_read_bcount_and_ireason(ide_drive_t *, u16 *, u8 *);
extern int drive_is_ready(ide_drive_t *);
void ide_pktcmd_tf_load(ide_drive_t *, u32, u16, u8);
+ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc,
+ ide_handler_t *handler, unsigned int timeout, ide_expiry_t *expiry,
+ void (*update_buffers)(ide_drive_t *, struct ide_atapi_pc *),
+ void (*retry_pc)(ide_drive_t *), void (*dsc_handle)(ide_drive_t *),
+ void (*io_buffers)(ide_drive_t *, struct ide_atapi_pc *, unsigned int,
+ int));
+ide_startstop_t ide_transfer_pc(ide_drive_t *, struct ide_atapi_pc *,
+ ide_handler_t *, unsigned int, ide_expiry_t *);
+ide_startstop_t ide_issue_pc(ide_drive_t *, struct ide_atapi_pc *,
+ ide_handler_t *, unsigned int, ide_expiry_t *);
+
ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *);
void task_end_request(ide_drive_t *, struct request *, u8);
int ide_cmd_ioctl(ide_drive_t *, unsigned int, unsigned long);
int ide_task_ioctl(ide_drive_t *, unsigned int, unsigned long);
-extern int system_bus_clock(void);
-
extern int ide_driveid_update(ide_drive_t *);
extern int ide_config_drive_speed(ide_drive_t *, u8);
extern u8 eighty_ninty_three (ide_drive_t *);
#define ide_pci_register_driver(d) pci_register_driver(d)
#endif
-void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *, int, u8 *);
+void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *, int,
+ hw_regs_t *, hw_regs_t **);
void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *);
#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
int ide_pci_set_master(struct pci_dev *, const char *);
unsigned long ide_pci_dma_base(ide_hwif_t *, const struct ide_port_info *);
+int ide_pci_check_simplex(ide_hwif_t *, const struct ide_port_info *);
int ide_hwif_setup_dma(ide_hwif_t *, const struct ide_port_info *);
#else
static inline int ide_hwif_setup_dma(ide_hwif_t *hwif,
}
#endif
-extern void default_hwif_iops(ide_hwif_t *);
-extern void default_hwif_mmiops(ide_hwif_t *);
-extern void default_hwif_transport(ide_hwif_t *);
-
typedef struct ide_pci_enablebit_s {
u8 reg; /* byte pci reg holding the enable-bit */
u8 mask; /* mask to isolate the enable-bit */
IDE_HFLAG_NO_SET_MODE = (1 << 9),
/* trust BIOS for programming chipset/device for DMA */
IDE_HFLAG_TRUST_BIOS_FOR_DMA = (1 << 10),
- /* host uses VDMA (tied with IDE_HFLAG_CS5520 for now) */
- IDE_HFLAG_VDMA = (1 << 11),
+ /* host is CS5510/CS5520 */
+ IDE_HFLAG_CS5520 = (1 << 11),
/* ATAPI DMA is unsupported */
IDE_HFLAG_NO_ATAPI_DMA = (1 << 12),
/* set if host is a "non-bootable" controller */
IDE_HFLAG_NO_DMA = (1 << 14),
/* check if host is PCI IDE device before allowing DMA */
IDE_HFLAG_NO_AUTODMA = (1 << 15),
- /* don't autotune PIO */
- IDE_HFLAG_NO_AUTOTUNE = (1 << 16),
- /* host is CS5510/CS5520 */
- IDE_HFLAG_CS5520 = IDE_HFLAG_VDMA,
+ /* host uses MMIO */
+ IDE_HFLAG_MMIO = (1 << 16),
/* no LBA48 */
IDE_HFLAG_NO_LBA48 = (1 << 17),
/* no LBA48 DMA */
IDE_HFLAG_IO_32BIT = (1 << 24),
/* unmask IRQs */
IDE_HFLAG_UNMASK_IRQS = (1 << 25),
- IDE_HFLAG_ABUSE_SET_DMA_MODE = (1 << 26),
/* serialize ports if DMA is possible (for sl82c105) */
IDE_HFLAG_SERIALIZE_DMA = (1 << 27),
/* force host out of "simplex" mode */
struct ide_port_info {
char *name;
- unsigned int (*init_chipset)(struct pci_dev *, const char *);
+ unsigned int (*init_chipset)(struct pci_dev *);
void (*init_iops)(ide_hwif_t *);
void (*init_hwif)(ide_hwif_t *);
int (*init_dma)(ide_hwif_t *,
const struct ide_port_info *);
+ const struct ide_tp_ops *tp_ops;
const struct ide_port_ops *port_ops;
- struct ide_dma_ops *dma_ops;
+ const struct ide_dma_ops *dma_ops;
ide_pci_enablebit_t enablebits[2];
hwif_chipset_t chipset;
u8 udma_mask;
};
-int ide_setup_pci_device(struct pci_dev *, const struct ide_port_info *);
-int ide_setup_pci_devices(struct pci_dev *, struct pci_dev *, const struct ide_port_info *);
+int ide_pci_init_one(struct pci_dev *, const struct ide_port_info *, void *);
+int ide_pci_init_two(struct pci_dev *, struct pci_dev *,
+ const struct ide_port_info *, void *);
+void ide_pci_remove(struct pci_dev *);
void ide_map_sg(ide_drive_t *, struct request *);
void ide_init_sg_cmd(ide_drive_t *, struct request *);
extern int ide_build_dmatable(ide_drive_t *, struct request *);
int ide_allocate_dma_engine(ide_hwif_t *);
void ide_release_dma_engine(ide_hwif_t *);
-void ide_setup_dma(ide_hwif_t *, unsigned long, const struct ide_port_info *);
void ide_dma_host_set(ide_drive_t *, int);
extern int ide_dma_setup(ide_drive_t *);
+void ide_dma_exec_cmd(ide_drive_t *, u8);
extern void ide_dma_start(ide_drive_t *);
extern int __ide_dma_end(ide_drive_t *);
+int ide_dma_test_irq(ide_drive_t *);
extern void ide_dma_lost_irq(ide_drive_t *);
extern void ide_dma_timeout(ide_drive_t *);
+extern const struct ide_dma_ops sff_dma_ops;
#endif /* CONFIG_BLK_DEV_IDEDMA_SFF */
#else
#endif
void ide_remove_port_from_hwgroup(ide_hwif_t *);
-void ide_unregister(unsigned int);
+void ide_unregister(ide_hwif_t *);
void ide_register_region(struct gendisk *);
void ide_unregister_region(struct gendisk *);
void ide_undecoded_slave(ide_drive_t *);
-int ide_device_add_all(u8 *idx, const struct ide_port_info *);
-int ide_device_add(u8 idx[4], const struct ide_port_info *);
+void ide_port_apply_params(ide_hwif_t *);
+
+struct ide_host *ide_host_alloc_all(const struct ide_port_info *, hw_regs_t **);
+struct ide_host *ide_host_alloc(const struct ide_port_info *, hw_regs_t **);
+void ide_host_free(struct ide_host *);
+int ide_host_register(struct ide_host *, const struct ide_port_info *,
+ hw_regs_t **);
+int ide_host_add(const struct ide_port_info *, hw_regs_t **,
+ struct ide_host **);
+void ide_host_remove(struct ide_host *);
int ide_legacy_device_add(const struct ide_port_info *, unsigned long);
void ide_port_unregister_devices(ide_hwif_t *);
void ide_port_scan(ide_hwif_t *);
u64 ide_get_lba_addr(struct ide_taskfile *, int);
u8 ide_dump_status(ide_drive_t *, const char *, u8);
-typedef struct ide_pio_timings_s {
- int setup_time; /* Address setup (ns) minimum */
- int active_time; /* Active pulse (ns) minimum */
- int cycle_time; /* Cycle time (ns) minimum = */
- /* active + recovery (+ setup for some chips) */
-} ide_pio_timings_t;
+struct ide_timing {
+ u8 mode;
+ u8 setup; /* t1 */
+ u16 act8b; /* t2 for 8-bit io */
+ u16 rec8b; /* t2i for 8-bit io */
+ u16 cyc8b; /* t0 for 8-bit io */
+ u16 active; /* t2 or tD */
+ u16 recover; /* t2i or tK */
+ u16 cycle; /* t0 */
+ u16 udma; /* t2CYCTYP/2 */
+};
+
+enum {
+ IDE_TIMING_SETUP = (1 << 0),
+ IDE_TIMING_ACT8B = (1 << 1),
+ IDE_TIMING_REC8B = (1 << 2),
+ IDE_TIMING_CYC8B = (1 << 3),
+ IDE_TIMING_8BIT = IDE_TIMING_ACT8B | IDE_TIMING_REC8B |
+ IDE_TIMING_CYC8B,
+ IDE_TIMING_ACTIVE = (1 << 4),
+ IDE_TIMING_RECOVER = (1 << 5),
+ IDE_TIMING_CYCLE = (1 << 6),
+ IDE_TIMING_UDMA = (1 << 7),
+ IDE_TIMING_ALL = IDE_TIMING_SETUP | IDE_TIMING_8BIT |
+ IDE_TIMING_ACTIVE | IDE_TIMING_RECOVER |
+ IDE_TIMING_CYCLE | IDE_TIMING_UDMA,
+};
+
+struct ide_timing *ide_timing_find_mode(u8);
+u16 ide_pio_cycle_time(ide_drive_t *, u8);
+void ide_timing_merge(struct ide_timing *, struct ide_timing *,
+ struct ide_timing *, unsigned int);
+int ide_timing_compute(ide_drive_t *, u8, struct ide_timing *, int, int);
+
+int ide_scan_pio_blacklist(char *);
-unsigned int ide_pio_cycle_time(ide_drive_t *, u8);
u8 ide_get_best_pio_mode(ide_drive_t *, u8, u8);
-extern const ide_pio_timings_t ide_pio_timings[6];
int ide_set_pio_mode(ide_drive_t *, u8);
int ide_set_dma_mode(ide_drive_t *, u8);
static inline int hwif_to_node(ide_hwif_t *hwif)
{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- return hwif->dev ? pcibus_to_node(dev->bus) : -1;
+ return hwif->dev ? dev_to_node(hwif->dev) : -1;
}
static inline ide_drive_t *ide_get_paired_drive(ide_drive_t *drive)
return &hwif->drives[(drive->dn ^ 1) & 1];
}
-
-static inline void ide_set_irq(ide_drive_t *drive, int on)
-{
- ide_hwif_t *hwif = drive->hwif;
-
- hwif->OUTB(drive->ctl | (on ? 0 : 2),
- hwif->io_ports[IDE_CONTROL_OFFSET]);
-}
-
-static inline u8 ide_read_status(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
-
- return hwif->INB(hwif->io_ports[IDE_STATUS_OFFSET]);
-}
-
-static inline u8 ide_read_altstatus(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
-
- return hwif->INB(hwif->io_ports[IDE_CONTROL_OFFSET]);
-}
-
-static inline u8 ide_read_error(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
-
- return hwif->INB(hwif->io_ports[IDE_ERROR_OFFSET]);
-}
-
-/*
- * Too bad. The drive wants to send us data which we are not ready to accept.
- * Just throw it away.
- */
-static inline void ide_atapi_discard_data(ide_drive_t *drive, unsigned bcount)
-{
- ide_hwif_t *hwif = drive->hwif;
-
- /* FIXME: use ->atapi_input_bytes */
- while (bcount--)
- (void)hwif->INB(hwif->io_ports[IDE_DATA_OFFSET]);
-}
-
-static inline void ide_atapi_write_zeros(ide_drive_t *drive, unsigned bcount)
-{
- ide_hwif_t *hwif = drive->hwif;
-
- /* FIXME: use ->atapi_output_bytes */
- while (bcount--)
- hwif->OUTB(0, hwif->io_ports[IDE_DATA_OFFSET]);
-}
-
#endif /* _IDE_H */
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff