#include <linux/sched.h> /* for completion */
#include <linux/mutex.h>
+extern struct bus_type i2c_bus_type;
+
/* --- General options ------------------------------------------------ */
struct i2c_msg;
struct i2c_client;
struct i2c_driver;
union i2c_smbus_data;
+struct i2c_board_info;
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
/*
* The master routines are the ones normally used to transmit data to devices
* on a bus (or read from them). Apart from two basic transfer functions to
* transmit one message at a time, a more complex version can be used to
* transmit an arbitrary number of messages without interruption.
*/
-extern int i2c_master_send(struct i2c_client *,const char* ,int);
-extern int i2c_master_recv(struct i2c_client *,char* ,int);
+extern int i2c_master_send(struct i2c_client *client, const char *buf,
+ int count);
+extern int i2c_master_recv(struct i2c_client *client, char *buf, int count);
/* Transfer num messages.
*/
-extern int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num);
-
+extern int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+ int num);
/* This is the very generalized SMBus access routine. You probably do not
want to use this, though; one of the functions below may be much easier,
and probably just as fast.
Note that we use i2c_adapter here, because you do not need a specific
smbus adapter to call this function. */
-extern s32 i2c_smbus_xfer (struct i2c_adapter * adapter, u16 addr,
- unsigned short flags,
- char read_write, u8 command, int size,
- union i2c_smbus_data * data);
+extern s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
+ unsigned short flags, char read_write, u8 command,
+ int size, union i2c_smbus_data *data);
/* Now follow the 'nice' access routines. These also document the calling
- conventions of smbus_access. */
-
-extern s32 i2c_smbus_write_quick(struct i2c_client * client, u8 value);
-extern s32 i2c_smbus_read_byte(struct i2c_client * client);
-extern s32 i2c_smbus_write_byte(struct i2c_client * client, u8 value);
-extern s32 i2c_smbus_read_byte_data(struct i2c_client * client, u8 command);
-extern s32 i2c_smbus_write_byte_data(struct i2c_client * client,
- u8 command, u8 value);
-extern s32 i2c_smbus_read_word_data(struct i2c_client * client, u8 command);
-extern s32 i2c_smbus_write_word_data(struct i2c_client * client,
- u8 command, u16 value);
+ conventions of i2c_smbus_xfer. */
+
+extern s32 i2c_smbus_read_byte(struct i2c_client *client);
+extern s32 i2c_smbus_write_byte(struct i2c_client *client, u8 value);
+extern s32 i2c_smbus_read_byte_data(struct i2c_client *client, u8 command);
+extern s32 i2c_smbus_write_byte_data(struct i2c_client *client,
+ u8 command, u8 value);
+extern s32 i2c_smbus_read_word_data(struct i2c_client *client, u8 command);
+extern s32 i2c_smbus_write_word_data(struct i2c_client *client,
+ u8 command, u16 value);
/* Returns the number of read bytes */
extern s32 i2c_smbus_read_block_data(struct i2c_client *client,
u8 command, u8 *values);
-extern s32 i2c_smbus_write_block_data(struct i2c_client * client,
- u8 command, u8 length,
- const u8 *values);
+extern s32 i2c_smbus_write_block_data(struct i2c_client *client,
+ u8 command, u8 length, const u8 *values);
/* Returns the number of read bytes */
-extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client * client,
+extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client *client,
u8 command, u8 length, u8 *values);
-extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client * client,
+extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client *client,
u8 command, u8 length,
const u8 *values);
+#endif /* I2C */
-/*
- * A driver is capable of handling one or more physical devices present on
- * I2C adapters. This information is used to inform the driver of adapter
- * events.
+/**
+ * struct i2c_driver - represent an I2C device driver
+ * @class: What kind of i2c device we instantiate (for detect)
+ * @attach_adapter: Callback for bus addition (for legacy drivers)
+ * @detach_adapter: Callback for bus removal (for legacy drivers)
+ * @probe: Callback for device binding
+ * @remove: Callback for device unbinding
+ * @shutdown: Callback for device shutdown
+ * @suspend: Callback for device suspend
+ * @resume: Callback for device resume
+ * @command: Callback for bus-wide signaling (optional)
+ * @driver: Device driver model driver
+ * @id_table: List of I2C devices supported by this driver
+ * @detect: Callback for device detection
+ * @address_list: The I2C addresses to probe (for detect)
+ * @clients: List of detected clients we created (for i2c-core use only)
*
* The driver.owner field should be set to the module owner of this driver.
* The driver.name field should be set to the name of this driver.
+ *
+ * For automatic device detection, both @detect and @address_data must
+ * be defined. @class should also be set, otherwise only devices forced
+ * with module parameters will be created. The detect function must
+ * fill at least the name field of the i2c_board_info structure it is
+ * handed upon successful detection, and possibly also the flags field.
+ *
+ * If @detect is missing, the driver will still work fine for enumerated
+ * devices. Detected devices simply won't be supported. This is expected
+ * for the many I2C/SMBus devices which can't be detected reliably, and
+ * the ones which can always be enumerated in practice.
+ *
+ * The i2c_client structure which is handed to the @detect callback is
+ * not a real i2c_client. It is initialized just enough so that you can
+ * call i2c_smbus_read_byte_data and friends on it. Don't do anything
+ * else with it. In particular, calling dev_dbg and friends on it is
+ * not allowed.
*/
-
struct i2c_driver {
- int id;
unsigned int class;
- /* Notifies the driver that a new bus has appeared. This routine
- * can be used by the driver to test if the bus meets its conditions
- * & seek for the presence of the chip(s) it supports. If found, it
- * registers the client(s) that are on the bus to the i2c admin. via
- * i2c_attach_client. (LEGACY I2C DRIVERS ONLY)
+ /* Notifies the driver that a new bus has appeared or is about to be
+ * removed. You should avoid using this if you can, it will probably
+ * be removed in a near future.
*/
int (*attach_adapter)(struct i2c_adapter *);
int (*detach_adapter)(struct i2c_adapter *);
- /* tells the driver that a client is about to be deleted & gives it
- * the chance to remove its private data. Also, if the client struct
- * has been dynamically allocated by the driver in the function above,
- * it must be freed here. (LEGACY I2C DRIVERS ONLY)
- */
- int (*detach_client)(struct i2c_client *);
-
- /* Standard driver model interfaces, for "new style" i2c drivers.
- * With the driver model, device enumeration is NEVER done by drivers;
- * it's done by infrastructure. (NEW STYLE DRIVERS ONLY)
- */
- int (*probe)(struct i2c_client *);
+ /* Standard driver model interfaces */
+ int (*probe)(struct i2c_client *, const struct i2c_device_id *);
int (*remove)(struct i2c_client *);
/* driver model interfaces that don't relate to enumeration */
/* a ioctl like command that can be used to perform specific functions
* with the device.
*/
- int (*command)(struct i2c_client *client,unsigned int cmd, void *arg);
+ int (*command)(struct i2c_client *client, unsigned int cmd, void *arg);
struct device_driver driver;
- struct list_head list;
+ const struct i2c_device_id *id_table;
+
+ /* Device detection callback for automatic device creation */
+ int (*detect)(struct i2c_client *, struct i2c_board_info *);
+ const unsigned short *address_list;
+ struct list_head clients;
};
#define to_i2c_driver(d) container_of(d, struct i2c_driver, driver)
-#define I2C_NAME_SIZE 20
-
/**
* struct i2c_client - represent an I2C slave device
* @flags: I2C_CLIENT_TEN indicates the device uses a ten bit chip address;
* generic enough to hide second-sourcing and compatible revisions.
* @adapter: manages the bus segment hosting this I2C device
* @driver: device's driver, hence pointer to access routines
- * @usage_count: counts current number of users of this client
* @dev: Driver model device node for the slave.
* @irq: indicates the IRQ generated by this device (if any)
- * @driver_name: Identifies new-style driver used with this device; also
- * used as the module name for hotplug/coldplug modprobe support.
- * @list: list of active/busy clients
- * @released: used to synchronize client releases & detaches and references
+ * @detected: member of an i2c_driver.clients list or i2c-core's
+ * userspace_devices list
*
* An i2c_client identifies a single device (i.e. chip) connected to an
* i2c bus. The behaviour exposed to Linux is defined by the driver
char name[I2C_NAME_SIZE];
struct i2c_adapter *adapter; /* the adapter we sit on */
struct i2c_driver *driver; /* and our access routines */
- int usage_count; /* How many accesses currently */
- /* to the client */
struct device dev; /* the device structure */
- int irq; /* irq issued by device (or -1) */
- char driver_name[KOBJ_NAME_LEN];
- struct list_head list;
- struct completion released;
+ int irq; /* irq issued by device */
+ struct list_head detected;
};
#define to_i2c_client(d) container_of(d, struct i2c_client, dev)
+extern struct i2c_client *i2c_verify_client(struct device *dev);
+
static inline struct i2c_client *kobj_to_i2c_client(struct kobject *kobj)
{
struct device * const dev = container_of(kobj, struct device, kobj);
return to_i2c_client(dev);
}
-static inline void *i2c_get_clientdata (struct i2c_client *dev)
+static inline void *i2c_get_clientdata(const struct i2c_client *dev)
{
- return dev_get_drvdata (&dev->dev);
+ return dev_get_drvdata(&dev->dev);
}
-static inline void i2c_set_clientdata (struct i2c_client *dev, void *data)
+static inline void i2c_set_clientdata(struct i2c_client *dev, void *data)
{
- dev_set_drvdata (&dev->dev, data);
+ dev_set_drvdata(&dev->dev, data);
}
/**
* struct i2c_board_info - template for device creation
- * @driver_name: identifies the driver to be bound to the device
- * @type: optional chip type information, to initialize i2c_client.name
+ * @type: chip type, to initialize i2c_client.name
* @flags: to initialize i2c_client.flags
* @addr: stored in i2c_client.addr
* @platform_data: stored in i2c_client.dev.platform_data
+ * @archdata: copied into i2c_client.dev.archdata
* @irq: stored in i2c_client.irq
*
* I2C doesn't actually support hardware probing, although controllers and
* that, such as chip type, configuration, associated IRQ, and so on.
*
* i2c_board_info is used to build tables of information listing I2C devices
- * that are present. This information is used to grow the driver model tree
- * for "new style" I2C drivers. For mainboards this is done statically using
- * i2c_register_board_info(); bus numbers identify adapters that aren't
- * yet available. For add-on boards, i2c_new_device() does this dynamically
- * with the adapter already known.
+ * that are present. This information is used to grow the driver model tree.
+ * For mainboards this is done statically using i2c_register_board_info();
+ * bus numbers identify adapters that aren't yet available. For add-on boards,
+ * i2c_new_device() does this dynamically with the adapter already known.
*/
struct i2c_board_info {
- char driver_name[KOBJ_NAME_LEN];
char type[I2C_NAME_SIZE];
unsigned short flags;
unsigned short addr;
void *platform_data;
+ struct dev_archdata *archdata;
int irq;
};
/**
- * I2C_BOARD_INFO - macro used to list an i2c device and its driver
- * @driver: identifies the driver to use with the device
+ * I2C_BOARD_INFO - macro used to list an i2c device and its address
+ * @dev_type: identifies the device type
* @dev_addr: the device's address on the bus.
*
* This macro initializes essential fields of a struct i2c_board_info,
* declaring what has been provided on a particular board. Optional
- * fields (such as the chip type, its associated irq, or device-specific
- * platform_data) are provided using conventional syntax.
+ * fields (such as associated irq, or device-specific platform_data)
+ * are provided using conventional syntax.
*/
-#define I2C_BOARD_INFO(driver,dev_addr) \
- .driver_name = (driver), .addr = (dev_addr)
+#define I2C_BOARD_INFO(dev_type, dev_addr) \
+ .type = dev_type, .addr = (dev_addr)
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
/* Add-on boards should register/unregister their devices; e.g. a board
* with integrated I2C, a config eeprom, sensors, and a codec that's
* used in conjunction with the primary hardware.
struct i2c_board_info *info,
unsigned short const *addr_list);
+/* For devices that use several addresses, use i2c_new_dummy() to make
+ * client handles for the extra addresses.
+ */
+extern struct i2c_client *
+i2c_new_dummy(struct i2c_adapter *adap, u16 address);
+
extern void i2c_unregister_device(struct i2c_client *);
+#endif /* I2C */
/* Mainboard arch_initcall() code should register all its I2C devices.
* This is done at arch_initcall time, before declaring any i2c adapters.
* Modules for add-on boards must use other calls.
*/
+#ifdef CONFIG_I2C_BOARDINFO
extern int
-i2c_register_board_info(int busnum, struct i2c_board_info const *info, unsigned n);
-
+i2c_register_board_info(int busnum, struct i2c_board_info const *info,
+ unsigned n);
+#else
+static inline int
+i2c_register_board_info(int busnum, struct i2c_board_info const *info,
+ unsigned n)
+{
+ return 0;
+}
+#endif /* I2C_BOARDINFO */
/*
* The following structs are for those who like to implement new bus drivers:
using common I2C messages */
/* master_xfer should return the number of messages successfully
processed, or a negative value on error */
- int (*master_xfer)(struct i2c_adapter *adap,struct i2c_msg *msgs,
- int num);
+ int (*master_xfer)(struct i2c_adapter *adap, struct i2c_msg *msgs,
+ int num);
int (*smbus_xfer) (struct i2c_adapter *adap, u16 addr,
- unsigned short flags, char read_write,
- u8 command, int size, union i2c_smbus_data * data);
+ unsigned short flags, char read_write,
+ u8 command, int size, union i2c_smbus_data *data);
/* To determine what the adapter supports */
u32 (*functionality) (struct i2c_adapter *);
struct i2c_adapter {
struct module *owner;
unsigned int id;
- unsigned int class;
+ unsigned int class; /* classes to allow probing for */
const struct i2c_algorithm *algo; /* the algorithm to access the bus */
void *algo_data;
- /* --- administration stuff. */
- int (*client_register)(struct i2c_client *);
- int (*client_unregister)(struct i2c_client *);
-
/* data fields that are valid for all devices */
- u8 level; /* nesting level for lockdep */
- struct mutex bus_lock;
- struct mutex clist_lock;
+ struct rt_mutex bus_lock;
- int timeout;
+ int timeout; /* in jiffies */
int retries;
struct device dev; /* the adapter device */
int nr;
- struct list_head clients;
- struct list_head list;
char name[48];
struct completion dev_released;
};
#define to_i2c_adapter(d) container_of(d, struct i2c_adapter, dev)
-static inline void *i2c_get_adapdata (struct i2c_adapter *dev)
+static inline void *i2c_get_adapdata(const struct i2c_adapter *dev)
{
- return dev_get_drvdata (&dev->dev);
+ return dev_get_drvdata(&dev->dev);
}
-static inline void i2c_set_adapdata (struct i2c_adapter *dev, void *data)
+static inline void i2c_set_adapdata(struct i2c_adapter *dev, void *data)
{
- dev_set_drvdata (&dev->dev, data);
+ dev_set_drvdata(&dev->dev, data);
+}
+
+/**
+ * i2c_lock_adapter - Prevent access to an I2C bus segment
+ * @adapter: Target I2C bus segment
+ */
+static inline void i2c_lock_adapter(struct i2c_adapter *adapter)
+{
+ rt_mutex_lock(&adapter->bus_lock);
+}
+
+/**
+ * i2c_unlock_adapter - Reauthorize access to an I2C bus segment
+ * @adapter: Target I2C bus segment
+ */
+static inline void i2c_unlock_adapter(struct i2c_adapter *adapter)
+{
+ rt_mutex_unlock(&adapter->bus_lock);
}
/*flags for the client struct: */
#define I2C_CLASS_HWMON (1<<0) /* lm_sensors, ... */
#define I2C_CLASS_TV_ANALOG (1<<1) /* bttv + friends */
#define I2C_CLASS_TV_DIGITAL (1<<2) /* dvb cards */
-#define I2C_CLASS_DDC (1<<3) /* i2c-matroxfb ? */
-#define I2C_CLASS_CAM_ANALOG (1<<4) /* camera with analog CCD */
-#define I2C_CLASS_CAM_DIGITAL (1<<5) /* most webcams */
-#define I2C_CLASS_SOUND (1<<6) /* sound devices */
-#define I2C_CLASS_ALL (UINT_MAX) /* all of the above */
-
-/* i2c_client_address_data is the struct for holding default client
- * addresses for a driver and for the parameters supplied on the
- * command line
- */
-struct i2c_client_address_data {
- unsigned short *normal_i2c;
- unsigned short *probe;
- unsigned short *ignore;
- unsigned short **forces;
-};
+#define I2C_CLASS_DDC (1<<3) /* DDC bus on graphics adapters */
+#define I2C_CLASS_SPD (1<<7) /* SPD EEPROMs and similar */
/* Internal numbers to terminate lists */
#define I2C_CLIENT_END 0xfffeU
/* The numbers to use to set I2C bus address */
#define ANY_I2C_BUS 0xffff
+/* Construct an I2C_CLIENT_END-terminated array of i2c addresses */
+#define I2C_ADDRS(addr, addrs...) \
+ ((const unsigned short []){ addr, ## addrs, I2C_CLIENT_END })
+
/* ----- functions exported by i2c.o */
/* administration...
*/
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
extern int i2c_add_adapter(struct i2c_adapter *);
extern int i2c_del_adapter(struct i2c_adapter *);
extern int i2c_add_numbered_adapter(struct i2c_adapter *);
return i2c_register_driver(THIS_MODULE, driver);
}
-extern int i2c_attach_client(struct i2c_client *);
-extern int i2c_detach_client(struct i2c_client *);
-
-/* Should be used to make sure that client-struct is valid and that it
- is okay to access the i2c-client.
- returns -ENODEV if client has gone in the meantime */
-extern int i2c_use_client(struct i2c_client *);
-extern int i2c_release_client(struct i2c_client *);
+extern struct i2c_client *i2c_use_client(struct i2c_client *client);
+extern void i2c_release_client(struct i2c_client *client);
/* call the i2c_client->command() of all attached clients with
* the given arguments */
extern void i2c_clients_command(struct i2c_adapter *adap,
unsigned int cmd, void *arg);
-/* returns -EBUSY if address has been taken, 0 if not. Note that the only
- other place at which this is called is within i2c_attach_client; so
- you can cheat by simply not registering. Not recommended, of course! */
-extern int i2c_check_addr (struct i2c_adapter *adapter, int addr);
-
-/* Detect function. It iterates over all possible addresses itself.
- * It will only call found_proc if some client is connected at the
- * specific address (unless a 'force' matched);
- */
-extern int i2c_probe(struct i2c_adapter *adapter,
- struct i2c_client_address_data *address_data,
- int (*found_proc) (struct i2c_adapter *, int, int));
-
-extern struct i2c_adapter* i2c_get_adapter(int id);
+extern struct i2c_adapter *i2c_get_adapter(int id);
extern void i2c_put_adapter(struct i2c_adapter *adap);
return (func & i2c_get_functionality(adap)) == func;
}
-/* Return id number for a specific adapter */
+/* Return the adapter number for a specific adapter */
static inline int i2c_adapter_id(struct i2c_adapter *adap)
{
return adap->nr;
}
+#endif /* I2C */
#endif /* __KERNEL__ */
/**
#define I2C_FUNC_I2C 0x00000001
#define I2C_FUNC_10BIT_ADDR 0x00000002
-#define I2C_FUNC_PROTOCOL_MANGLING 0x00000004 /* I2C_M_{REV_DIR_ADDR,NOSTART,..} */
-#define I2C_FUNC_SMBUS_HWPEC_CALC 0x00000008 /* SMBus 2.0 */
+#define I2C_FUNC_PROTOCOL_MANGLING 0x00000004 /* I2C_M_NOSTART etc. */
+#define I2C_FUNC_SMBUS_PEC 0x00000008
#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL 0x00008000 /* SMBus 2.0 */
#define I2C_FUNC_SMBUS_QUICK 0x00010000
#define I2C_FUNC_SMBUS_READ_BYTE 0x00020000
#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000
#define I2C_FUNC_SMBUS_READ_I2C_BLOCK 0x04000000 /* I2C-like block xfer */
#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK 0x08000000 /* w/ 1-byte reg. addr. */
-#define I2C_FUNC_SMBUS_READ_I2C_BLOCK_2 0x10000000 /* I2C-like block xfer */
-#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK_2 0x20000000 /* w/ 2-byte reg. addr. */
-
-#define I2C_FUNC_SMBUS_BYTE (I2C_FUNC_SMBUS_READ_BYTE | \
- I2C_FUNC_SMBUS_WRITE_BYTE)
-#define I2C_FUNC_SMBUS_BYTE_DATA (I2C_FUNC_SMBUS_READ_BYTE_DATA | \
- I2C_FUNC_SMBUS_WRITE_BYTE_DATA)
-#define I2C_FUNC_SMBUS_WORD_DATA (I2C_FUNC_SMBUS_READ_WORD_DATA | \
- I2C_FUNC_SMBUS_WRITE_WORD_DATA)
-#define I2C_FUNC_SMBUS_BLOCK_DATA (I2C_FUNC_SMBUS_READ_BLOCK_DATA | \
- I2C_FUNC_SMBUS_WRITE_BLOCK_DATA)
-#define I2C_FUNC_SMBUS_I2C_BLOCK (I2C_FUNC_SMBUS_READ_I2C_BLOCK | \
- I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)
-#define I2C_FUNC_SMBUS_I2C_BLOCK_2 (I2C_FUNC_SMBUS_READ_I2C_BLOCK_2 | \
- I2C_FUNC_SMBUS_WRITE_I2C_BLOCK_2)
-
-#define I2C_FUNC_SMBUS_EMUL (I2C_FUNC_SMBUS_QUICK | \
- I2C_FUNC_SMBUS_BYTE | \
- I2C_FUNC_SMBUS_BYTE_DATA | \
- I2C_FUNC_SMBUS_WORD_DATA | \
- I2C_FUNC_SMBUS_PROC_CALL | \
- I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \
- I2C_FUNC_SMBUS_I2C_BLOCK)
+
+#define I2C_FUNC_SMBUS_BYTE (I2C_FUNC_SMBUS_READ_BYTE | \
+ I2C_FUNC_SMBUS_WRITE_BYTE)
+#define I2C_FUNC_SMBUS_BYTE_DATA (I2C_FUNC_SMBUS_READ_BYTE_DATA | \
+ I2C_FUNC_SMBUS_WRITE_BYTE_DATA)
+#define I2C_FUNC_SMBUS_WORD_DATA (I2C_FUNC_SMBUS_READ_WORD_DATA | \
+ I2C_FUNC_SMBUS_WRITE_WORD_DATA)
+#define I2C_FUNC_SMBUS_BLOCK_DATA (I2C_FUNC_SMBUS_READ_BLOCK_DATA | \
+ I2C_FUNC_SMBUS_WRITE_BLOCK_DATA)
+#define I2C_FUNC_SMBUS_I2C_BLOCK (I2C_FUNC_SMBUS_READ_I2C_BLOCK | \
+ I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)
+
+#define I2C_FUNC_SMBUS_EMUL (I2C_FUNC_SMBUS_QUICK | \
+ I2C_FUNC_SMBUS_BYTE | \
+ I2C_FUNC_SMBUS_BYTE_DATA | \
+ I2C_FUNC_SMBUS_WORD_DATA | \
+ I2C_FUNC_SMBUS_PROC_CALL | \
+ I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \
+ I2C_FUNC_SMBUS_I2C_BLOCK | \
+ I2C_FUNC_SMBUS_PEC)
/*
* Data for SMBus Messages
__u8 byte;
__u16 word;
__u8 block[I2C_SMBUS_BLOCK_MAX + 2]; /* block[0] is used for length */
- /* and one more for user-space compatibility */
+ /* and one more for user-space compatibility */
};
-/* smbus_access read or write markers */
+/* i2c_smbus_xfer read or write markers */
#define I2C_SMBUS_READ 1
#define I2C_SMBUS_WRITE 0
#define I2C_SMBUS_BLOCK_PROC_CALL 7 /* SMBus 2.0 */
#define I2C_SMBUS_I2C_BLOCK_DATA 8
-
-#ifdef __KERNEL__
-
-/* These defines are used for probing i2c client addresses */
-/* The length of the option lists */
-#define I2C_CLIENT_MAX_OPTS 48
-
-/* Default fill of many variables */
-#define I2C_CLIENT_DEFAULTS {I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
- I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
- I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
- I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
- I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
- I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
- I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
- I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
- I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
- I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
- I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
- I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
- I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
- I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
- I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
- I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END}
-
-/* I2C_CLIENT_MODULE_PARM creates a module parameter, and puts it in the
- module header */
-
-#define I2C_CLIENT_MODULE_PARM(var,desc) \
- static unsigned short var[I2C_CLIENT_MAX_OPTS] = I2C_CLIENT_DEFAULTS; \
- static unsigned int var##_num; \
- module_param_array(var, short, &var##_num, 0); \
- MODULE_PARM_DESC(var,desc)
-
-#define I2C_CLIENT_MODULE_PARM_FORCE(name) \
-I2C_CLIENT_MODULE_PARM(force_##name, \
- "List of adapter,address pairs which are " \
- "unquestionably assumed to contain a `" \
- # name "' chip")
-
-
-#define I2C_CLIENT_INSMOD_COMMON \
-I2C_CLIENT_MODULE_PARM(probe, "List of adapter,address pairs to scan " \
- "additionally"); \
-I2C_CLIENT_MODULE_PARM(ignore, "List of adapter,address pairs not to " \
- "scan"); \
-static struct i2c_client_address_data addr_data = { \
- .normal_i2c = normal_i2c, \
- .probe = probe, \
- .ignore = ignore, \
- .forces = forces, \
-}
-
-/* These are the ones you want to use in your own drivers. Pick the one
- which matches the number of devices the driver differenciates between. */
-#define I2C_CLIENT_INSMOD \
- I2C_CLIENT_MODULE_PARM(force, \
- "List of adapter,address pairs to boldly assume " \
- "to be present"); \
- static unsigned short *forces[] = { \
- force, \
- NULL \
- }; \
-I2C_CLIENT_INSMOD_COMMON
-
-#define I2C_CLIENT_INSMOD_1(chip1) \
-enum chips { any_chip, chip1 }; \
-I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \
- "boldly assume to be present"); \
-I2C_CLIENT_MODULE_PARM_FORCE(chip1); \
-static unsigned short *forces[] = { force, force_##chip1, NULL }; \
-I2C_CLIENT_INSMOD_COMMON
-
-#define I2C_CLIENT_INSMOD_2(chip1, chip2) \
-enum chips { any_chip, chip1, chip2 }; \
-I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \
- "boldly assume to be present"); \
-I2C_CLIENT_MODULE_PARM_FORCE(chip1); \
-I2C_CLIENT_MODULE_PARM_FORCE(chip2); \
-static unsigned short *forces[] = { force, force_##chip1, \
- force_##chip2, NULL }; \
-I2C_CLIENT_INSMOD_COMMON
-
-#define I2C_CLIENT_INSMOD_3(chip1, chip2, chip3) \
-enum chips { any_chip, chip1, chip2, chip3 }; \
-I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \
- "boldly assume to be present"); \
-I2C_CLIENT_MODULE_PARM_FORCE(chip1); \
-I2C_CLIENT_MODULE_PARM_FORCE(chip2); \
-I2C_CLIENT_MODULE_PARM_FORCE(chip3); \
-static unsigned short *forces[] = { force, force_##chip1, \
- force_##chip2, force_##chip3, \
- NULL }; \
-I2C_CLIENT_INSMOD_COMMON
-
-#define I2C_CLIENT_INSMOD_4(chip1, chip2, chip3, chip4) \
-enum chips { any_chip, chip1, chip2, chip3, chip4 }; \
-I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \
- "boldly assume to be present"); \
-I2C_CLIENT_MODULE_PARM_FORCE(chip1); \
-I2C_CLIENT_MODULE_PARM_FORCE(chip2); \
-I2C_CLIENT_MODULE_PARM_FORCE(chip3); \
-I2C_CLIENT_MODULE_PARM_FORCE(chip4); \
-static unsigned short *forces[] = { force, force_##chip1, \
- force_##chip2, force_##chip3, \
- force_##chip4, NULL}; \
-I2C_CLIENT_INSMOD_COMMON
-
-#define I2C_CLIENT_INSMOD_5(chip1, chip2, chip3, chip4, chip5) \
-enum chips { any_chip, chip1, chip2, chip3, chip4, chip5 }; \
-I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \
- "boldly assume to be present"); \
-I2C_CLIENT_MODULE_PARM_FORCE(chip1); \
-I2C_CLIENT_MODULE_PARM_FORCE(chip2); \
-I2C_CLIENT_MODULE_PARM_FORCE(chip3); \
-I2C_CLIENT_MODULE_PARM_FORCE(chip4); \
-I2C_CLIENT_MODULE_PARM_FORCE(chip5); \
-static unsigned short *forces[] = { force, force_##chip1, \
- force_##chip2, force_##chip3, \
- force_##chip4, force_##chip5, \
- NULL }; \
-I2C_CLIENT_INSMOD_COMMON
-
-#define I2C_CLIENT_INSMOD_6(chip1, chip2, chip3, chip4, chip5, chip6) \
-enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6 }; \
-I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \
- "boldly assume to be present"); \
-I2C_CLIENT_MODULE_PARM_FORCE(chip1); \
-I2C_CLIENT_MODULE_PARM_FORCE(chip2); \
-I2C_CLIENT_MODULE_PARM_FORCE(chip3); \
-I2C_CLIENT_MODULE_PARM_FORCE(chip4); \
-I2C_CLIENT_MODULE_PARM_FORCE(chip5); \
-I2C_CLIENT_MODULE_PARM_FORCE(chip6); \
-static unsigned short *forces[] = { force, force_##chip1, \
- force_##chip2, force_##chip3, \
- force_##chip4, force_##chip5, \
- force_##chip6, NULL }; \
-I2C_CLIENT_INSMOD_COMMON
-
-#define I2C_CLIENT_INSMOD_7(chip1, chip2, chip3, chip4, chip5, chip6, chip7) \
-enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6, \
- chip7 }; \
-I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \
- "boldly assume to be present"); \
-I2C_CLIENT_MODULE_PARM_FORCE(chip1); \
-I2C_CLIENT_MODULE_PARM_FORCE(chip2); \
-I2C_CLIENT_MODULE_PARM_FORCE(chip3); \
-I2C_CLIENT_MODULE_PARM_FORCE(chip4); \
-I2C_CLIENT_MODULE_PARM_FORCE(chip5); \
-I2C_CLIENT_MODULE_PARM_FORCE(chip6); \
-I2C_CLIENT_MODULE_PARM_FORCE(chip7); \
-static unsigned short *forces[] = { force, force_##chip1, \
- force_##chip2, force_##chip3, \
- force_##chip4, force_##chip5, \
- force_##chip6, force_##chip7, \
- NULL }; \
-I2C_CLIENT_INSMOD_COMMON
-
-#define I2C_CLIENT_INSMOD_8(chip1, chip2, chip3, chip4, chip5, chip6, chip7, chip8) \
-enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6, \
- chip7, chip8 }; \
-I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \
- "boldly assume to be present"); \
-I2C_CLIENT_MODULE_PARM_FORCE(chip1); \
-I2C_CLIENT_MODULE_PARM_FORCE(chip2); \
-I2C_CLIENT_MODULE_PARM_FORCE(chip3); \
-I2C_CLIENT_MODULE_PARM_FORCE(chip4); \
-I2C_CLIENT_MODULE_PARM_FORCE(chip5); \
-I2C_CLIENT_MODULE_PARM_FORCE(chip6); \
-I2C_CLIENT_MODULE_PARM_FORCE(chip7); \
-I2C_CLIENT_MODULE_PARM_FORCE(chip8); \
-static unsigned short *forces[] = { force, force_##chip1, \
- force_##chip2, force_##chip3, \
- force_##chip4, force_##chip5, \
- force_##chip6, force_##chip7, \
- force_##chip8, NULL }; \
-I2C_CLIENT_INSMOD_COMMON
-#endif /* __KERNEL__ */
#endif /* _LINUX_I2C_H */