#define HID_GD_RIGHT 0x00010092
#define HID_GD_LEFT 0x00010093
+#define HID_DG_DIGITIZER 0x000d0001
+#define HID_DG_PEN 0x000d0002
+#define HID_DG_LIGHTPEN 0x000d0003
+#define HID_DG_TOUCHSCREEN 0x000d0004
+#define HID_DG_TOUCHPAD 0x000d0005
+#define HID_DG_STYLUS 0x000d0020
+#define HID_DG_PUCK 0x000d0021
+#define HID_DG_FINGER 0x000d0022
+#define HID_DG_TIPPRESSURE 0x000d0030
+#define HID_DG_BARRELPRESSURE 0x000d0031
+#define HID_DG_INRANGE 0x000d0032
+#define HID_DG_TOUCH 0x000d0033
+#define HID_DG_UNTOUCH 0x000d0034
+#define HID_DG_TAP 0x000d0035
+#define HID_DG_TABLETFUNCTIONKEY 0x000d0039
+#define HID_DG_PROGRAMCHANGEKEY 0x000d003a
+#define HID_DG_INVERT 0x000d003c
+#define HID_DG_TIPSWITCH 0x000d0042
+#define HID_DG_TIPSWITCH2 0x000d0043
+#define HID_DG_BARRELSWITCH 0x000d0044
+#define HID_DG_ERASER 0x000d0045
+#define HID_DG_TABLETPICK 0x000d0046
+/*
+ * as of May 20, 2009 the usages below are not yet in the official USB spec
+ * but are being pushed by Microsft as described in their paper "Digitizer
+ * Drivers for Windows Touch and Pen-Based Computers"
+ */
+#define HID_DG_CONFIDENCE 0x000d0047
+#define HID_DG_WIDTH 0x000d0048
+#define HID_DG_HEIGHT 0x000d0049
+#define HID_DG_CONTACTID 0x000d0051
+#define HID_DG_INPUTMODE 0x000d0052
+#define HID_DG_DEVICEINDEX 0x000d0053
+#define HID_DG_CONTACTCOUNT 0x000d0054
+#define HID_DG_CONTACTMAX 0x000d0055
+
/*
* HID report types --- Ouch! HID spec says 1 2 3!
*/
#define HID_FEATURE_REPORT 2
/*
+ * HID connect requests
+ */
+
+#define HID_CONNECT_HIDINPUT 0x01
+#define HID_CONNECT_HIDINPUT_FORCE 0x02
+#define HID_CONNECT_HIDRAW 0x04
+#define HID_CONNECT_HIDDEV 0x08
+#define HID_CONNECT_HIDDEV_FORCE 0x10
+#define HID_CONNECT_FF 0x20
+#define HID_CONNECT_DEFAULT (HID_CONNECT_HIDINPUT|HID_CONNECT_HIDRAW| \
+ HID_CONNECT_HIDDEV|HID_CONNECT_FF)
+
+/*
* HID device quirks.
*/
#define HID_QUIRK_NOTOUCH 0x00000002
#define HID_QUIRK_IGNORE 0x00000004
#define HID_QUIRK_NOGET 0x00000008
-#define HID_QUIRK_HIDDEV 0x00000010
#define HID_QUIRK_BADPAD 0x00000020
#define HID_QUIRK_MULTI_INPUT 0x00000040
-#define HID_QUIRK_2WHEEL_MOUSE_HACK_7 0x00000080
-#define HID_QUIRK_2WHEEL_MOUSE_HACK_5 0x00000100
-#define HID_QUIRK_2WHEEL_MOUSE_HACK_ON 0x00000200
-#define HID_QUIRK_MIGHTYMOUSE 0x00000400
-#define HID_QUIRK_APPLE_HAS_FN 0x00000800
-#define HID_QUIRK_APPLE_FN_ON 0x00001000
-#define HID_QUIRK_INVERT_HWHEEL 0x00002000
-#define HID_QUIRK_APPLE_ISO_KEYBOARD 0x00004000
-#define HID_QUIRK_BAD_RELATIVE_KEYS 0x00008000
#define HID_QUIRK_SKIP_OUTPUT_REPORTS 0x00010000
-#define HID_QUIRK_IGNORE_MOUSE 0x00020000
-#define HID_QUIRK_SONY_PS3_CONTROLLER 0x00040000
-#define HID_QUIRK_DUPLICATE_USAGES 0x00080000
-#define HID_QUIRK_RESET_LEDS 0x00100000
-#define HID_QUIRK_HIDINPUT 0x00200000
-#define HID_QUIRK_LOGITECH_IGNORE_DOUBLED_WHEEL 0x00400000
-#define HID_QUIRK_LOGITECH_EXPANDED_KEYMAP 0x00800000
-#define HID_QUIRK_IGNORE_HIDINPUT 0x01000000
-#define HID_QUIRK_2WHEEL_MOUSE_HACK_B8 0x02000000
-#define HID_QUIRK_HWHEEL_WHEEL_INVERT 0x04000000
-#define HID_QUIRK_MICROSOFT_KEYS 0x08000000
#define HID_QUIRK_FULLSPEED_INTERVAL 0x10000000
-#define HID_QUIRK_APPLE_NUMLOCK_EMULATION 0x20000000
-
-/*
- * Separate quirks for runtime report descriptor fixup
- */
-
-#define HID_QUIRK_RDESC_CYMOTION 0x00000001
-#define HID_QUIRK_RDESC_LOGITECH 0x00000002
-#define HID_QUIRK_RDESC_SWAPPED_MIN_MAX 0x00000004
-#define HID_QUIRK_RDESC_PETALYNX 0x00000008
-#define HID_QUIRK_RDESC_MACBOOK_JIS 0x00000010
-#define HID_QUIRK_RDESC_BUTTON_CONSUMER 0x00000020
-#define HID_QUIRK_RDESC_SAMSUNG_REMOTE 0x00000040
-#define HID_QUIRK_RDESC_MICROSOFT_RECV_1028 0x00000080
-#define HID_QUIRK_RDESC_SUNPLUS_WDESKTOP 0x00000100
+#define HID_QUIRK_NO_INIT_REPORTS 0x20000000
/*
* This is the global environment of the parser. This information is
struct hid_control_fifo {
unsigned char dir;
struct hid_report *report;
+ char *raw_report;
+};
+
+struct hid_output_fifo {
+ struct hid_report *report;
+ char *raw_report;
};
#define HID_CLAIMED_INPUT 1
#define HID_CLAIMED_HIDRAW 4
#define HID_STAT_ADDED 1
-
-#define HID_CTRL_RUNNING 1
-#define HID_OUT_RUNNING 2
-#define HID_IN_RUNNING 3
-#define HID_RESET_PENDING 4
-#define HID_SUSPENDED 5
-#define HID_CLEAR_HALT 6
-#define HID_DISCONNECTED 7
+#define HID_STAT_PARSED 2
struct hid_input {
struct list_head list;
struct input_dev *input;
};
+enum hid_type {
+ HID_TYPE_OTHER = 0,
+ HID_TYPE_USBMOUSE
+};
+
struct hid_driver;
+struct hid_ll_driver;
struct hid_device { /* device report descriptor */
__u8 *rdesc;
__u32 vendor; /* Vendor ID */
__u32 product; /* Product ID */
__u32 version; /* HID version */
+ enum hid_type type; /* device type (mouse, kbd, ...) */
unsigned country; /* HID country */
struct hid_report_enum report_enum[HID_REPORT_TYPES];
struct device dev; /* device */
struct hid_driver *driver;
+ struct hid_ll_driver *ll_driver;
unsigned int status; /* see STAT flags above */
unsigned claimed; /* Claimed by hidinput, hiddev? */
void *driver_data;
- __s32 delayed_value; /* For A4 Tech mice hwheel quirk */
-
- /* device-specific function pointers */
- int (*hidinput_input_event) (struct input_dev *, unsigned int, unsigned int, int);
- int (*hid_open) (struct hid_device *);
- void (*hid_close) (struct hid_device *);
+ /* temporary hid_ff handling (until moved to the drivers) */
+ int (*ff_init)(struct hid_device *);
/* hiddev event handler */
+ int (*hiddev_connect)(struct hid_device *, unsigned int);
+ void (*hiddev_disconnect)(struct hid_device *);
void (*hiddev_hid_event) (struct hid_device *, struct hid_field *field,
struct hid_usage *, __s32);
void (*hiddev_report_event) (struct hid_device *, struct hid_report *);
/* handler for raw output data, used by hidraw */
int (*hid_output_raw_report) (struct hid_device *, __u8 *, size_t);
-#ifdef CONFIG_USB_HIDINPUT_POWERBOOK
- unsigned long apple_pressed_fn[BITS_TO_LONGS(KEY_CNT)];
- unsigned long pb_pressed_numlock[BITS_TO_LONGS(KEY_CNT)];
-#endif
+
+ /* debugging support via debugfs */
+ unsigned short debug;
+ struct dentry *debug_dir;
+ struct dentry *debug_rdesc;
+ struct dentry *debug_events;
+ struct list_head debug_list;
+ wait_queue_head_t debug_wait;
};
static inline void *hid_get_drvdata(struct hid_device *hdev)
* @name: driver name (e.g. "Footech_bar-wheel")
* @id_table: which devices is this driver for (must be non-NULL for probe
* to be called)
+ * @dyn_list: list of dynamically added device ids
+ * @dyn_lock: lock protecting @dyn_list
* @probe: new device inserted
* @remove: device removed (NULL if not a hot-plug capable driver)
* @report_table: on which reports to call raw_event (NULL means all)
* @raw_event: if report in report_table, this hook is called (NULL means nop)
* @usage_table: on which events to call event (NULL means all)
* @event: if usage in usage_table, this hook is called (NULL means nop)
+ * @report_fixup: called before report descriptor parsing (NULL means nop)
+ * @input_mapping: invoked on input registering before mapping an usage
+ * @input_mapped: invoked on input registering after mapping an usage
*
* raw_event and event should return 0 on no action performed, 1 when no
* further processing should be done and negative on error
+ *
+ * input_mapping shall return a negative value to completely ignore this usage
+ * (e.g. doubled or invalid usage), zero to continue with parsing of this
+ * usage by generic code (no special handling needed) or positive to skip
+ * generic parsing (needed special handling which was done in the hook already)
+ * input_mapped shall return negative to inform the layer that this usage
+ * should not be considered for further processing or zero to notify that
+ * no processing was performed and should be done in a generic manner
+ * Both these functions may be NULL which means the same behavior as returning
+ * zero from them.
*/
struct hid_driver {
char *name;
const struct hid_device_id *id_table;
+ struct list_head dyn_list;
+ spinlock_t dyn_lock;
+
int (*probe)(struct hid_device *dev, const struct hid_device_id *id);
void (*remove)(struct hid_device *dev);
const struct hid_usage_id *usage_table;
int (*event)(struct hid_device *hdev, struct hid_field *field,
struct hid_usage *usage, __s32 value);
+
+ void (*report_fixup)(struct hid_device *hdev, __u8 *buf,
+ unsigned int size);
+
+ int (*input_mapping)(struct hid_device *hdev,
+ struct hid_input *hidinput, struct hid_field *field,
+ struct hid_usage *usage, unsigned long **bit, int *max);
+ int (*input_mapped)(struct hid_device *hdev,
+ struct hid_input *hidinput, struct hid_field *field,
+ struct hid_usage *usage, unsigned long **bit, int *max);
/* private: */
struct device_driver driver;
};
+/**
+ * hid_ll_driver - low level driver callbacks
+ * @start: called on probe to start the device
+ * @stop: called on remove
+ * @open: called by input layer on open
+ * @close: called by input layer on close
+ * @hidinput_input_event: event input event (e.g. ff or leds)
+ * @parse: this method is called only once to parse the device data,
+ * shouldn't allocate anything to not leak memory
+ */
+struct hid_ll_driver {
+ int (*start)(struct hid_device *hdev);
+ void (*stop)(struct hid_device *hdev);
+
+ int (*open)(struct hid_device *hdev);
+ void (*close)(struct hid_device *hdev);
+
+ int (*power)(struct hid_device *hdev, int level);
+
+ int (*hidinput_input_event) (struct input_dev *idev, unsigned int type,
+ unsigned int code, int value);
+
+ int (*parse)(struct hid_device *hdev);
+};
+
+#define PM_HINT_FULLON 1<<5
+#define PM_HINT_NORMAL 1<<1
+
/* Applications from HID Usage Tables 4/8/99 Version 1.1 */
/* We ignore a few input applications that are not widely used */
#define IS_INPUT_APPLICATION(a) (((a >= 0x00010000) && (a <= 0x00010008)) || (a == 0x00010080) || (a == 0x000c0001) || (a == 0x000d0002))
/* HID core API */
-#ifdef CONFIG_HID_DEBUG
extern int hid_debug;
-#endif
extern int hid_add_device(struct hid_device *);
extern void hid_destroy_device(struct hid_device *);
extern void hidinput_hid_event(struct hid_device *, struct hid_field *, struct hid_usage *, __s32);
extern void hidinput_report_event(struct hid_device *hid, struct hid_report *report);
-extern int hidinput_connect(struct hid_device *);
+extern int hidinput_connect(struct hid_device *hid, unsigned int force);
extern void hidinput_disconnect(struct hid_device *);
int hid_set_field(struct hid_field *, unsigned, __s32);
int hid_input_report(struct hid_device *, int type, u8 *, int, int);
int hidinput_find_field(struct hid_device *hid, unsigned int type, unsigned int code, struct hid_field **field);
-int hidinput_mapping_quirks(struct hid_usage *, struct input_dev *, unsigned long **, int *);
-int hidinput_event_quirks(struct hid_device *, struct hid_field *, struct hid_usage *, __s32);
-int hidinput_apple_event(struct hid_device *, struct input_dev *, struct hid_usage *, __s32);
void hid_output_report(struct hid_report *report, __u8 *data);
struct hid_device *hid_allocate_device(void);
int hid_parse_report(struct hid_device *hid, __u8 *start, unsigned size);
+int hid_check_keys_pressed(struct hid_device *hid);
+int hid_connect(struct hid_device *hid, unsigned int connect_mask);
+void hid_disconnect(struct hid_device *hid);
+
+/**
+ * hid_map_usage - map usage input bits
+ *
+ * @hidinput: hidinput which we are interested in
+ * @usage: usage to fill in
+ * @bit: pointer to input->{}bit (out parameter)
+ * @max: maximal valid usage->code to consider later (out parameter)
+ * @type: input event type (EV_KEY, EV_REL, ...)
+ * @c: code which corresponds to this usage and type
+ */
+static inline void hid_map_usage(struct hid_input *hidinput,
+ struct hid_usage *usage, unsigned long **bit, int *max,
+ __u8 type, __u16 c)
+{
+ struct input_dev *input = hidinput->input;
+
+ usage->type = type;
+ usage->code = c;
+
+ switch (type) {
+ case EV_ABS:
+ *bit = input->absbit;
+ *max = ABS_MAX;
+ break;
+ case EV_REL:
+ *bit = input->relbit;
+ *max = REL_MAX;
+ break;
+ case EV_KEY:
+ *bit = input->keybit;
+ *max = KEY_MAX;
+ break;
+ case EV_LED:
+ *bit = input->ledbit;
+ *max = LED_MAX;
+ break;
+ }
+}
+
+/**
+ * hid_map_usage_clear - map usage input bits and clear the input bit
+ *
+ * The same as hid_map_usage, except the @c bit is also cleared in supported
+ * bits (@bit).
+ */
+static inline void hid_map_usage_clear(struct hid_input *hidinput,
+ struct hid_usage *usage, unsigned long **bit, int *max,
+ __u8 type, __u16 c)
+{
+ hid_map_usage(hidinput, usage, bit, max, type, c);
+ clear_bit(c, *bit);
+}
+
+/**
+ * hid_parse - parse HW reports
+ *
+ * @hdev: hid device
+ *
+ * Call this from probe after you set up the device (if needed). Your
+ * report_fixup will be called (if non-NULL) after reading raw report from
+ * device before passing it to hid layer for real parsing.
+ */
+static inline int __must_check hid_parse(struct hid_device *hdev)
+{
+ int ret;
+
+ if (hdev->status & HID_STAT_PARSED)
+ return 0;
+
+ ret = hdev->ll_driver->parse(hdev);
+ if (!ret)
+ hdev->status |= HID_STAT_PARSED;
+
+ return ret;
+}
+
+/**
+ * hid_hw_start - start underlaying HW
+ *
+ * @hdev: hid device
+ * @connect_mask: which outputs to connect, see HID_CONNECT_*
+ *
+ * Call this in probe function *after* hid_parse. This will setup HW buffers
+ * and start the device (if not deffered to device open). hid_hw_stop must be
+ * called if this was successfull.
+ */
+static inline int __must_check hid_hw_start(struct hid_device *hdev,
+ unsigned int connect_mask)
+{
+ int ret = hdev->ll_driver->start(hdev);
+ if (ret || !connect_mask)
+ return ret;
+ ret = hid_connect(hdev, connect_mask);
+ if (ret)
+ hdev->ll_driver->stop(hdev);
+ return ret;
+}
+
+/**
+ * hid_hw_stop - stop underlaying HW
+ *
+ * @hdev: hid device
+ *
+ * This is usually called from remove function or from probe when something
+ * failed and hid_hw_start was called already.
+ */
+static inline void hid_hw_stop(struct hid_device *hdev)
+{
+ hid_disconnect(hdev);
+ hdev->ll_driver->stop(hdev);
+}
void hid_report_raw_event(struct hid_device *hid, int type, u8 *data, int size,
int interrupt);
u32 usbhid_lookup_quirk(const u16 idVendor, const u16 idProduct);
int usbhid_quirks_init(char **quirks_param);
void usbhid_quirks_exit(void);
-void usbhid_fixup_report_descriptor(const u16, const u16, char *, unsigned, char **);
-
-#ifdef CONFIG_HID_FF
-int hid_ff_init(struct hid_device *hid);
+void usbhid_set_leds(struct hid_device *hid);
-int hid_lgff_init(struct hid_device *hid);
-int hid_lg2ff_init(struct hid_device *hid);
-int hid_plff_init(struct hid_device *hid);
-int hid_tmff_init(struct hid_device *hid);
-int hid_zpff_init(struct hid_device *hid);
#ifdef CONFIG_HID_PID
int hid_pidff_init(struct hid_device *hid);
#else
-static inline int hid_pidff_init(struct hid_device *hid) { return -ENODEV; }
+#define hid_pidff_init NULL
#endif
-#else
-static inline int hid_ff_init(struct hid_device *hid) { return -1; }
-#endif
-
-#ifdef CONFIG_HID_DEBUG
#define dbg_hid(format, arg...) if (hid_debug) \
printk(KERN_DEBUG "%s: " format ,\
__FILE__ , ## arg)
-#define dbg_hid_line(format, arg...) if (hid_debug) \
- printk(format, ## arg)
-#else
-static inline int __attribute__((format(printf, 1, 2)))
-dbg_hid(const char *fmt, ...)
-{
- return 0;
-}
-#define dbg_hid_line dbg_hid
-#endif
-
#define err_hid(format, arg...) printk(KERN_ERR "%s: " format "\n" , \
__FILE__ , ## arg)
-#endif
+#endif /* HID_FF */
+
#endif
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff