#ifndef _LINUX_HDREG_H
#define _LINUX_HDREG_H
-#ifdef __KERNEL__
-#include <linux/ata.h>
-
-/*
- * This file contains some defines for the AT-hd-controller.
- * Various sources.
- */
-
-/* ide.c has its own port definitions in "ide.h" */
-
-#define HD_IRQ 14
-
-/* Hd controller regs. Ref: IBM AT Bios-listing */
-#define HD_DATA 0x1f0 /* _CTL when writing */
-#define HD_ERROR 0x1f1 /* see err-bits */
-#define HD_NSECTOR 0x1f2 /* nr of sectors to read/write */
-#define HD_SECTOR 0x1f3 /* starting sector */
-#define HD_LCYL 0x1f4 /* starting cylinder */
-#define HD_HCYL 0x1f5 /* high byte of starting cyl */
-#define HD_CURRENT 0x1f6 /* 101dhhhh , d=drive, hhhh=head */
-#define HD_STATUS 0x1f7 /* see status-bits */
-#define HD_FEATURE HD_ERROR /* same io address, read=error, write=feature */
-#define HD_PRECOMP HD_FEATURE /* obsolete use of this port - predates IDE */
-#define HD_COMMAND HD_STATUS /* same io address, read=status, write=cmd */
-
-#define HD_CMD 0x3f6 /* used for resets */
-#define HD_ALTSTATUS 0x3f6 /* same as HD_STATUS but doesn't clear irq */
-
-/* remainder is shared between hd.c, ide.c, ide-cd.c, and the hdparm utility */
-
-/* Bits of HD_STATUS */
-#define ERR_STAT 0x01
-#define INDEX_STAT 0x02
-#define ECC_STAT 0x04 /* Corrected error */
-#define DRQ_STAT 0x08
-#define SEEK_STAT 0x10
-#define SRV_STAT 0x10
-#define WRERR_STAT 0x20
-#define READY_STAT 0x40
-#define BUSY_STAT 0x80
-
-/* Bits for HD_ERROR */
-#define MARK_ERR 0x01 /* Bad address mark */
-#define TRK0_ERR 0x02 /* couldn't find track 0 */
-#define ABRT_ERR 0x04 /* Command aborted */
-#define MCR_ERR 0x08 /* media change request */
-#define ID_ERR 0x10 /* ID field not found */
-#define MC_ERR 0x20 /* media changed */
-#define ECC_ERR 0x40 /* Uncorrectable ECC error */
-#define BBD_ERR 0x80 /* pre-EIDE meaning: block marked bad */
-#define ICRC_ERR 0x80 /* new meaning: CRC error during transfer */
-
-/* Bits of HD_NSECTOR */
-#define CD 0x01
-#define IO 0x02
-#define REL 0x04
-#define TAG_MASK 0xf8
-#endif /* __KERNEL__ */
-
#include <linux/types.h>
/*
#define HDIO_DRIVE_HOB_HDR_SIZE (8 * sizeof(__u8))
#define HDIO_DRIVE_TASK_HDR_SIZE (8 * sizeof(__u8))
-#define IDE_DRIVE_TASK_INVALID -1
#define IDE_DRIVE_TASK_NO_DATA 0
+#ifndef __KERNEL__
+#define IDE_DRIVE_TASK_INVALID -1
#define IDE_DRIVE_TASK_SET_XFER 1
-
#define IDE_DRIVE_TASK_IN 2
-
#define IDE_DRIVE_TASK_OUT 3
+#endif
#define IDE_DRIVE_TASK_RAW_WRITE 4
/*
#ifndef __KERNEL__
#define IDE_TASKFILE_STD_OUT_FLAGS 0xFE
#define IDE_HOB_STD_OUT_FLAGS 0x3C
-#endif
typedef unsigned char task_ioreg_t;
typedef unsigned long sata_ioreg_t;
+#endif
typedef union ide_reg_valid_s {
unsigned all : 16;
} ide_reg_valid_t;
typedef struct ide_task_request_s {
- task_ioreg_t io_ports[8];
- task_ioreg_t hob_ports[8];
+ __u8 io_ports[8];
+ __u8 hob_ports[8]; /* bytes 6 and 7 are unused */
ide_reg_valid_t out_flags;
ide_reg_valid_t in_flags;
int data_phase;
} ide_ioctl_request_t;
struct hd_drive_cmd_hdr {
- task_ioreg_t command;
- task_ioreg_t sector_number;
- task_ioreg_t feature;
- task_ioreg_t sector_count;
+ __u8 command;
+ __u8 sector_number;
+ __u8 feature;
+ __u8 sector_count;
};
+#ifndef __KERNEL__
typedef struct hd_drive_task_hdr {
- task_ioreg_t data;
- task_ioreg_t feature;
- task_ioreg_t sector_count;
- task_ioreg_t sector_number;
- task_ioreg_t low_cylinder;
- task_ioreg_t high_cylinder;
- task_ioreg_t device_head;
- task_ioreg_t command;
+ __u8 data;
+ __u8 feature;
+ __u8 sector_count;
+ __u8 sector_number;
+ __u8 low_cylinder;
+ __u8 high_cylinder;
+ __u8 device_head;
+ __u8 command;
} task_struct_t;
typedef struct hd_drive_hob_hdr {
- task_ioreg_t data;
- task_ioreg_t feature;
- task_ioreg_t sector_count;
- task_ioreg_t sector_number;
- task_ioreg_t low_cylinder;
- task_ioreg_t high_cylinder;
- task_ioreg_t device_head;
- task_ioreg_t control;
+ __u8 data;
+ __u8 feature;
+ __u8 sector_count;
+ __u8 sector_number;
+ __u8 low_cylinder;
+ __u8 high_cylinder;
+ __u8 device_head;
+ __u8 control;
} hob_struct_t;
-
-#define TASKFILE_INVALID 0x7fff
-#define TASKFILE_48 0x8000
+#endif
#define TASKFILE_NO_DATA 0x0000
#define TASKFILE_IN_DMAQ 0x0080
#define TASKFILE_OUT_DMAQ 0x0100
+#ifndef __KERNEL__
#define TASKFILE_P_IN 0x0200
#define TASKFILE_P_OUT 0x0400
#define TASKFILE_P_IN_DMA 0x0800
#define TASKFILE_P_OUT_DMA 0x1000
#define TASKFILE_P_IN_DMAQ 0x2000
#define TASKFILE_P_OUT_DMAQ 0x4000
+#define TASKFILE_48 0x8000
+#define TASKFILE_INVALID 0x7fff
+#endif
+#ifndef __KERNEL__
/* ATA/ATAPI Commands pre T13 Spec */
#define WIN_NOP 0x00
/*
#define SETFEATURES_EN_RLA 0xAA /* Enable read look-ahead feature */
#define SETFEATURES_PREFETCH 0xAB /* Sets drive prefetch value */
#define SETFEATURES_EN_REST 0xAC /* ATA-1 */
-#define SETFEATURES_4B_RW_LONG 0xBB /* Set Lenght of 4 bytes */
+#define SETFEATURES_4B_RW_LONG 0xBB /* Set Length of 4 bytes */
#define SETFEATURES_DIS_AAM 0xC2 /* Disable Automatic Acoustic Management */
#define SETFEATURES_EN_RPOD 0xCC /* Enable reverting to power on defaults */
#define SETFEATURES_DIS_RI 0xDD /* Disable release interrupt ATAPI */
#define SECURITY_ERASE_UNIT 0xBD
#define SECURITY_FREEZE_LOCK 0xBE
#define SECURITY_DISABLE_PASSWORD 0xBF
+#endif /* __KERNEL__ */
struct hd_geometry {
unsigned char heads;
#define HDIO_SET_NOWERR 0x0325 /* change ignore-write-error flag */
#define HDIO_SET_DMA 0x0326 /* change use-dma flag */
#define HDIO_SET_PIO_MODE 0x0327 /* reconfig interface to new speed */
+#ifndef __KERNEL__
#define HDIO_SCAN_HWIF 0x0328 /* register and (re)scan interface */
-#define HDIO_SET_NICE 0x0329 /* set nice flags */
#define HDIO_UNREGISTER_HWIF 0x032a /* unregister interface */
+#endif
+#define HDIO_SET_NICE 0x0329 /* set nice flags */
#define HDIO_SET_WCACHE 0x032b /* change write cache enable-disable */
#define HDIO_SET_ACOUSTIC 0x032c /* change acoustic behavior */
#define HDIO_SET_BUSSTATE 0x032d /* set the bus state of the hwif */
#define __NEW_HD_DRIVE_ID
+#ifndef __KERNEL__
/*
* Structure returned by HDIO_GET_IDENTITY, as per ANSI NCITS ATA6 rev.1b spec.
*
unsigned short words69_70[2]; /* reserved words 69-70
* future command overlap and queuing
*/
- /* HDIO_GET_IDENTITY currently returns only words 0 through 70 */
unsigned short words71_74[4]; /* reserved words 71-74
* for IDENTIFY PACKET DEVICE command
*/
* 7:0 Signature
*/
};
+#endif /* __KERNEL__ */
/*
* IDE "nice" flags. These are used on a per drive basis to determine
*/
#define IDE_NICE_DSC_OVERLAP (0) /* per the DSC overlap protocol */
#define IDE_NICE_ATAPI_OVERLAP (1) /* not supported yet */
-#define IDE_NICE_0 (2) /* when sure that it won't affect us */
#define IDE_NICE_1 (3) /* when probably won't affect us much */
+#ifndef __KERNEL__
+#define IDE_NICE_0 (2) /* when sure that it won't affect us */
#define IDE_NICE_2 (4) /* when we know it's on our expense */
+#endif
#endif /* _LINUX_HDREG_H */