__u8 phy_address;
__u8 transceiver; /* Which transceiver to use */
__u8 autoneg; /* Enable or disable autonegotiation */
+ __u8 mdio_support;
__u32 maxtxpkt; /* Tx pkts before generating tx int */
__u32 maxrxpkt; /* Rx pkts before generating rx int */
__u16 speed_hi;
- __u16 reserved2;
- __u32 reserved[3];
+ __u8 eth_tp_mdix;
+ __u8 reserved2;
+ __u32 lp_advertising; /* Features the link partner advertises */
+ __u32 reserved[2];
};
static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
return (ep->speed_hi << 16) | ep->speed;
}
+#define ETHTOOL_FWVERS_LEN 32
#define ETHTOOL_BUSINFO_LEN 32
/* these strings are set to whatever the driver author decides... */
struct ethtool_drvinfo {
__u32 cmd;
char driver[32]; /* driver short name, "tulip", "eepro100" */
char version[32]; /* driver version string */
- char fw_version[32]; /* firmware version string, if applicable */
+ char fw_version[ETHTOOL_FWVERS_LEN]; /* firmware version string */
char bus_info[ETHTOOL_BUSINFO_LEN]; /* Bus info for this IF. */
/* For PCI devices, use pci_name(pci_dev). */
char reserved1[32];
char reserved2[12];
+ /*
+ * Some struct members below are filled in
+ * using ops->get_sset_count(). Obtaining
+ * this info from ethtool_drvinfo is now
+ * deprecated; Use ETHTOOL_GSSET_INFO
+ * instead.
+ */
__u32 n_priv_flags; /* number of flags valid in ETHTOOL_GPFLAGS */
__u32 n_stats; /* number of u64's from ETHTOOL_GSTATS */
__u32 testinfo_len;
ETH_SS_TEST = 0,
ETH_SS_STATS,
ETH_SS_PRIV_FLAGS,
+ ETH_SS_NTUPLE_FILTERS,
};
/* for passing string sets for data tagging */
__u8 data[0];
};
+struct ethtool_sset_info {
+ __u32 cmd; /* ETHTOOL_GSSET_INFO */
+ __u32 reserved;
+ __u64 sset_mask; /* input: each bit selects an sset to query */
+ /* output: each bit a returned sset */
+ __u32 data[0]; /* ETH_SS_xxx count, in order, based on bits
+ in sset_mask. One bit implies one
+ __u32, two bits implies two
+ __u32's, etc. */
+};
+
enum ethtool_test_flags {
ETH_TEST_FL_OFFLINE = (1 << 0), /* online / offline */
ETH_TEST_FL_FAILED = (1 << 1), /* test passed / failed */
*/
enum ethtool_flags {
ETH_FLAG_LRO = (1 << 15), /* LRO is enabled */
+ ETH_FLAG_NTUPLE = (1 << 27), /* N-tuple filters enabled */
};
/* The following structures are for supporting RX network flow
__u32 rule_locs[0];
};
+struct ethtool_rx_ntuple_flow_spec {
+ __u32 flow_type;
+ union {
+ struct ethtool_tcpip4_spec tcp_ip4_spec;
+ struct ethtool_tcpip4_spec udp_ip4_spec;
+ struct ethtool_tcpip4_spec sctp_ip4_spec;
+ struct ethtool_ah_espip4_spec ah_ip4_spec;
+ struct ethtool_ah_espip4_spec esp_ip4_spec;
+ struct ethtool_rawip4_spec raw_ip4_spec;
+ struct ethtool_ether_spec ether_spec;
+ struct ethtool_usrip4_spec usr_ip4_spec;
+ __u8 hdata[64];
+ } h_u, m_u; /* entry, mask */
+
+ __u16 vlan_tag;
+ __u16 vlan_tag_mask;
+ __u64 data; /* user-defined flow spec data */
+ __u64 data_mask; /* user-defined flow spec mask */
+
+ /* signed to distinguish between queue and actions (DROP) */
+ __s32 action;
+#define ETHTOOL_RXNTUPLE_ACTION_DROP -1
+};
+
+struct ethtool_rx_ntuple {
+ __u32 cmd;
+ struct ethtool_rx_ntuple_flow_spec fs;
+};
+
+#define ETHTOOL_FLASH_MAX_FILENAME 128
+enum ethtool_flash_op_type {
+ ETHTOOL_FLASH_ALL_REGIONS = 0,
+};
+
+/* for passing firmware flashing related parameters */
+struct ethtool_flash {
+ __u32 cmd;
+ __u32 region;
+ char data[ETHTOOL_FLASH_MAX_FILENAME];
+};
+
#ifdef __KERNEL__
+#include <linux/rculist.h>
+
+struct ethtool_rx_ntuple_flow_spec_container {
+ struct ethtool_rx_ntuple_flow_spec fs;
+ struct list_head list;
+};
+
+struct ethtool_rx_ntuple_list {
+#define ETHTOOL_MAX_NTUPLE_LIST_ENTRY 1024
+#define ETHTOOL_MAX_NTUPLE_STRING_PER_ENTRY 14
+ struct list_head list;
+ unsigned int count;
+};
+
struct net_device;
/* Some generic methods drivers may use in their ethtool_ops */
u32 ethtool_op_get_link(struct net_device *dev);
+u32 ethtool_op_get_rx_csum(struct net_device *dev);
u32 ethtool_op_get_tx_csum(struct net_device *dev);
int ethtool_op_set_tx_csum(struct net_device *dev, u32 data);
int ethtool_op_set_tx_hw_csum(struct net_device *dev, u32 data);
int ethtool_op_set_ufo(struct net_device *dev, u32 data);
u32 ethtool_op_get_flags(struct net_device *dev);
int ethtool_op_set_flags(struct net_device *dev, u32 data);
+void ethtool_ntuple_flush(struct net_device *dev);
/**
* ðtool_ops - Alter and report network device settings
u32 (*get_priv_flags)(struct net_device *);
int (*set_priv_flags)(struct net_device *, u32);
int (*get_sset_count)(struct net_device *, int);
-
- /* the following hooks are obsolete */
- int (*self_test_count)(struct net_device *);/* use get_sset_count */
- int (*get_stats_count)(struct net_device *);/* use get_sset_count */
int (*get_rxnfc)(struct net_device *, struct ethtool_rxnfc *, void *);
int (*set_rxnfc)(struct net_device *, struct ethtool_rxnfc *);
+ int (*flash_device)(struct net_device *, struct ethtool_flash *);
+ int (*reset)(struct net_device *, u32 *);
+ int (*set_rx_ntuple)(struct net_device *, struct ethtool_rx_ntuple *);
+ int (*get_rx_ntuple)(struct net_device *, u32 stringset, void *);
};
#endif /* __KERNEL__ */
#define ETHTOOL_GRXCLSRLALL 0x00000030 /* Get all RX classification rule */
#define ETHTOOL_SRXCLSRLDEL 0x00000031 /* Delete RX classification rule */
#define ETHTOOL_SRXCLSRLINS 0x00000032 /* Insert RX classification rule */
+#define ETHTOOL_FLASHDEV 0x00000033 /* Flash firmware to device */
+#define ETHTOOL_RESET 0x00000034 /* Reset hardware */
+#define ETHTOOL_SRXNTUPLE 0x00000035 /* Add an n-tuple filter to device */
+#define ETHTOOL_GRXNTUPLE 0x00000036 /* Get n-tuple filters from device */
+#define ETHTOOL_GSSET_INFO 0x00000037 /* Get string set info */
/* compatibility with older code */
#define SPARC_ETH_GSET ETHTOOL_GSET
#define SUPPORTED_Pause (1 << 13)
#define SUPPORTED_Asym_Pause (1 << 14)
#define SUPPORTED_2500baseX_Full (1 << 15)
+#define SUPPORTED_Backplane (1 << 16)
+#define SUPPORTED_1000baseKX_Full (1 << 17)
+#define SUPPORTED_10000baseKX4_Full (1 << 18)
+#define SUPPORTED_10000baseKR_Full (1 << 19)
+#define SUPPORTED_10000baseR_FEC (1 << 20)
/* Indicates what features are advertised by the interface. */
#define ADVERTISED_10baseT_Half (1 << 0)
#define ADVERTISED_Pause (1 << 13)
#define ADVERTISED_Asym_Pause (1 << 14)
#define ADVERTISED_2500baseX_Full (1 << 15)
+#define ADVERTISED_Backplane (1 << 16)
+#define ADVERTISED_1000baseKX_Full (1 << 17)
+#define ADVERTISED_10000baseKX4_Full (1 << 18)
+#define ADVERTISED_10000baseKR_Full (1 << 19)
+#define ADVERTISED_10000baseR_FEC (1 << 20)
/* The following are all involved in forcing a particular link
* mode for the device for setting things. When getting the
#define PORT_MII 0x02
#define PORT_FIBRE 0x03
#define PORT_BNC 0x04
+#define PORT_DA 0x05
+#define PORT_NONE 0xef
+#define PORT_OTHER 0xff
/* Which transceiver to use. */
#define XCVR_INTERNAL 0x00
#define AUTONEG_DISABLE 0x00
#define AUTONEG_ENABLE 0x01
+/* Mode MDI or MDI-X */
+#define ETH_TP_MDI_INVALID 0x00
+#define ETH_TP_MDI 0x01
+#define ETH_TP_MDI_X 0x02
+
/* Wake-On-Lan options. */
#define WAKE_PHY (1 << 0)
#define WAKE_UCAST (1 << 1)
#define AH_V6_FLOW 0x0b
#define ESP_V6_FLOW 0x0c
#define IP_USER_FLOW 0x0d
+#define IPV4_FLOW 0x10
+#define IPV6_FLOW 0x11
/* L3-L4 network traffic flow hash options */
#define RXH_L2DA (1 << 1)
#define RX_CLS_FLOW_DISC 0xffffffffffffffffULL
+/* Reset flags */
+/* The reset() operation must clear the flags for the components which
+ * were actually reset. On successful return, the flags indicate the
+ * components which were not reset, either because they do not exist
+ * in the hardware or because they cannot be reset independently. The
+ * driver must never reset any components that were not requested.
+ */
+enum ethtool_reset_flags {
+ /* These flags represent components dedicated to the interface
+ * the command is addressed to. Shift any flag left by
+ * ETH_RESET_SHARED_SHIFT to reset a shared component of the
+ * same type.
+ */
+ ETH_RESET_MGMT = 1 << 0, /* Management processor */
+ ETH_RESET_IRQ = 1 << 1, /* Interrupt requester */
+ ETH_RESET_DMA = 1 << 2, /* DMA engine */
+ ETH_RESET_FILTER = 1 << 3, /* Filtering/flow direction */
+ ETH_RESET_OFFLOAD = 1 << 4, /* Protocol offload */
+ ETH_RESET_MAC = 1 << 5, /* Media access controller */
+ ETH_RESET_PHY = 1 << 6, /* Transceiver/PHY */
+ ETH_RESET_RAM = 1 << 7, /* RAM shared between
+ * multiple components */
+
+ ETH_RESET_DEDICATED = 0x0000ffff, /* All components dedicated to
+ * this interface */
+ ETH_RESET_ALL = 0xffffffff, /* All components used by this
+ * interface, even if shared */
+};
+#define ETH_RESET_SHARED_SHIFT 16
+
#endif /* _LINUX_ETHTOOL_H */