#ifndef _LINUX_CYCLADES_H
#define _LINUX_CYCLADES_H
+#include <linux/types.h>
+
struct cyclades_monitor {
unsigned long int_count;
unsigned long char_count;
*/
struct CUSTOM_REG {
- uclong fpga_id; /* FPGA Identification Register */
- uclong fpga_version; /* FPGA Version Number Register */
- uclong cpu_start; /* CPU start Register (write) */
- uclong cpu_stop; /* CPU stop Register (write) */
- uclong misc_reg; /* Miscelaneous Register */
- uclong idt_mode; /* IDT mode Register */
- uclong uart_irq_status; /* UART IRQ status Register */
- uclong clear_timer0_irq; /* Clear timer interrupt Register */
- uclong clear_timer1_irq; /* Clear timer interrupt Register */
- uclong clear_timer2_irq; /* Clear timer interrupt Register */
- uclong test_register; /* Test Register */
- uclong test_count; /* Test Count Register */
- uclong timer_select; /* Timer select register */
- uclong pr_uart_irq_status; /* Prioritized UART IRQ stat Reg */
- uclong ram_wait_state; /* RAM wait-state Register */
- uclong uart_wait_state; /* UART wait-state Register */
- uclong timer_wait_state; /* timer wait-state Register */
- uclong ack_wait_state; /* ACK wait State Register */
+ __u32 fpga_id; /* FPGA Identification Register */
+ __u32 fpga_version; /* FPGA Version Number Register */
+ __u32 cpu_start; /* CPU start Register (write) */
+ __u32 cpu_stop; /* CPU stop Register (write) */
+ __u32 misc_reg; /* Miscelaneous Register */
+ __u32 idt_mode; /* IDT mode Register */
+ __u32 uart_irq_status; /* UART IRQ status Register */
+ __u32 clear_timer0_irq; /* Clear timer interrupt Register */
+ __u32 clear_timer1_irq; /* Clear timer interrupt Register */
+ __u32 clear_timer2_irq; /* Clear timer interrupt Register */
+ __u32 test_register; /* Test Register */
+ __u32 test_count; /* Test Count Register */
+ __u32 timer_select; /* Timer select register */
+ __u32 pr_uart_irq_status; /* Prioritized UART IRQ stat Reg */
+ __u32 ram_wait_state; /* RAM wait-state Register */
+ __u32 uart_wait_state; /* UART wait-state Register */
+ __u32 timer_wait_state; /* timer wait-state Register */
+ __u32 ack_wait_state; /* ACK wait State Register */
};
/*
*/
struct RUNTIME_9060 {
- uclong loc_addr_range; /* 00h - Local Address Range */
- uclong loc_addr_base; /* 04h - Local Address Base */
- uclong loc_arbitr; /* 08h - Local Arbitration */
- uclong endian_descr; /* 0Ch - Big/Little Endian Descriptor */
- uclong loc_rom_range; /* 10h - Local ROM Range */
- uclong loc_rom_base; /* 14h - Local ROM Base */
- uclong loc_bus_descr; /* 18h - Local Bus descriptor */
- uclong loc_range_mst; /* 1Ch - Local Range for Master to PCI */
- uclong loc_base_mst; /* 20h - Local Base for Master PCI */
- uclong loc_range_io; /* 24h - Local Range for Master IO */
- uclong pci_base_mst; /* 28h - PCI Base for Master PCI */
- uclong pci_conf_io; /* 2Ch - PCI configuration for Master IO */
- uclong filler1; /* 30h */
- uclong filler2; /* 34h */
- uclong filler3; /* 38h */
- uclong filler4; /* 3Ch */
- uclong mail_box_0; /* 40h - Mail Box 0 */
- uclong mail_box_1; /* 44h - Mail Box 1 */
- uclong mail_box_2; /* 48h - Mail Box 2 */
- uclong mail_box_3; /* 4Ch - Mail Box 3 */
- uclong filler5; /* 50h */
- uclong filler6; /* 54h */
- uclong filler7; /* 58h */
- uclong filler8; /* 5Ch */
- uclong pci_doorbell; /* 60h - PCI to Local Doorbell */
- uclong loc_doorbell; /* 64h - Local to PCI Doorbell */
- uclong intr_ctrl_stat; /* 68h - Interrupt Control/Status */
- uclong init_ctrl; /* 6Ch - EEPROM control, Init Control, etc */
+ __u32 loc_addr_range; /* 00h - Local Address Range */
+ __u32 loc_addr_base; /* 04h - Local Address Base */
+ __u32 loc_arbitr; /* 08h - Local Arbitration */
+ __u32 endian_descr; /* 0Ch - Big/Little Endian Descriptor */
+ __u32 loc_rom_range; /* 10h - Local ROM Range */
+ __u32 loc_rom_base; /* 14h - Local ROM Base */
+ __u32 loc_bus_descr; /* 18h - Local Bus descriptor */
+ __u32 loc_range_mst; /* 1Ch - Local Range for Master to PCI */
+ __u32 loc_base_mst; /* 20h - Local Base for Master PCI */
+ __u32 loc_range_io; /* 24h - Local Range for Master IO */
+ __u32 pci_base_mst; /* 28h - PCI Base for Master PCI */
+ __u32 pci_conf_io; /* 2Ch - PCI configuration for Master IO */
+ __u32 filler1; /* 30h */
+ __u32 filler2; /* 34h */
+ __u32 filler3; /* 38h */
+ __u32 filler4; /* 3Ch */
+ __u32 mail_box_0; /* 40h - Mail Box 0 */
+ __u32 mail_box_1; /* 44h - Mail Box 1 */
+ __u32 mail_box_2; /* 48h - Mail Box 2 */
+ __u32 mail_box_3; /* 4Ch - Mail Box 3 */
+ __u32 filler5; /* 50h */
+ __u32 filler6; /* 54h */
+ __u32 filler7; /* 58h */
+ __u32 filler8; /* 5Ch */
+ __u32 pci_doorbell; /* 60h - PCI to Local Doorbell */
+ __u32 loc_doorbell; /* 64h - Local to PCI Doorbell */
+ __u32 intr_ctrl_stat; /* 68h - Interrupt Control/Status */
+ __u32 init_ctrl; /* 6Ch - EEPROM control, Init Control, etc */
};
/* Values for the Local Base Address re-map register */
#define ZF_TINACT ZF_TINACT_DEF
struct FIRM_ID {
- uclong signature; /* ZFIRM/U signature */
- uclong zfwctrl_addr; /* pointer to ZFW_CTRL structure */
+ __u32 signature; /* ZFIRM/U signature */
+ __u32 zfwctrl_addr; /* pointer to ZFW_CTRL structure */
};
/* Op. System id */
*/
struct CH_CTRL {
- uclong op_mode; /* operation mode */
- uclong intr_enable; /* interrupt masking */
- uclong sw_flow; /* SW flow control */
- uclong flow_status; /* output flow status */
- uclong comm_baud; /* baud rate - numerically specified */
- uclong comm_parity; /* parity */
- uclong comm_data_l; /* data length/stop */
- uclong comm_flags; /* other flags */
- uclong hw_flow; /* HW flow control */
- uclong rs_control; /* RS-232 outputs */
- uclong rs_status; /* RS-232 inputs */
- uclong flow_xon; /* xon char */
- uclong flow_xoff; /* xoff char */
- uclong hw_overflow; /* hw overflow counter */
- uclong sw_overflow; /* sw overflow counter */
- uclong comm_error; /* frame/parity error counter */
- uclong ichar;
- uclong filler[7];
+ __u32 op_mode; /* operation mode */
+ __u32 intr_enable; /* interrupt masking */
+ __u32 sw_flow; /* SW flow control */
+ __u32 flow_status; /* output flow status */
+ __u32 comm_baud; /* baud rate - numerically specified */
+ __u32 comm_parity; /* parity */
+ __u32 comm_data_l; /* data length/stop */
+ __u32 comm_flags; /* other flags */
+ __u32 hw_flow; /* HW flow control */
+ __u32 rs_control; /* RS-232 outputs */
+ __u32 rs_status; /* RS-232 inputs */
+ __u32 flow_xon; /* xon char */
+ __u32 flow_xoff; /* xoff char */
+ __u32 hw_overflow; /* hw overflow counter */
+ __u32 sw_overflow; /* sw overflow counter */
+ __u32 comm_error; /* frame/parity error counter */
+ __u32 ichar;
+ __u32 filler[7];
};
*/
struct BUF_CTRL {
- uclong flag_dma; /* buffers are in Host memory */
- uclong tx_bufaddr; /* address of the tx buffer */
- uclong tx_bufsize; /* tx buffer size */
- uclong tx_threshold; /* tx low water mark */
- uclong tx_get; /* tail index tx buf */
- uclong tx_put; /* head index tx buf */
- uclong rx_bufaddr; /* address of the rx buffer */
- uclong rx_bufsize; /* rx buffer size */
- uclong rx_threshold; /* rx high water mark */
- uclong rx_get; /* tail index rx buf */
- uclong rx_put; /* head index rx buf */
- uclong filler[5]; /* filler to align structures */
+ __u32 flag_dma; /* buffers are in Host memory */
+ __u32 tx_bufaddr; /* address of the tx buffer */
+ __u32 tx_bufsize; /* tx buffer size */
+ __u32 tx_threshold; /* tx low water mark */
+ __u32 tx_get; /* tail index tx buf */
+ __u32 tx_put; /* head index tx buf */
+ __u32 rx_bufaddr; /* address of the rx buffer */
+ __u32 rx_bufsize; /* rx buffer size */
+ __u32 rx_threshold; /* rx high water mark */
+ __u32 rx_get; /* tail index rx buf */
+ __u32 rx_put; /* head index rx buf */
+ __u32 filler[5]; /* filler to align structures */
};
/*
struct BOARD_CTRL {
/* static info provided by the on-board CPU */
- uclong n_channel; /* number of channels */
- uclong fw_version; /* firmware version */
+ __u32 n_channel; /* number of channels */
+ __u32 fw_version; /* firmware version */
/* static info provided by the driver */
- uclong op_system; /* op_system id */
- uclong dr_version; /* driver version */
+ __u32 op_system; /* op_system id */
+ __u32 dr_version; /* driver version */
/* board control area */
- uclong inactivity; /* inactivity control */
+ __u32 inactivity; /* inactivity control */
/* host to FW commands */
- uclong hcmd_channel; /* channel number */
- uclong hcmd_param; /* pointer to parameters */
+ __u32 hcmd_channel; /* channel number */
+ __u32 hcmd_param; /* pointer to parameters */
/* FW to Host commands */
- uclong fwcmd_channel; /* channel number */
- uclong fwcmd_param; /* pointer to parameters */
- uclong zf_int_queue_addr; /* offset for INT_QUEUE structure */
+ __u32 fwcmd_channel; /* channel number */
+ __u32 fwcmd_param; /* pointer to parameters */
+ __u32 zf_int_queue_addr; /* offset for INT_QUEUE structure */
/* filler so the structures are aligned */
- uclong filler[6];
+ __u32 filler[6];
};
/* Host Interrupt Queue */
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff