#include <linux/timex.h>
#include <linux/time.h>
#include <linux/list.h>
+#include <linux/cache.h>
+#include <linux/timer.h>
+#include <linux/init.h>
#include <asm/div64.h>
#include <asm/io.h>
/* clocksource cycle base type */
typedef u64 cycle_t;
+struct clocksource;
+
+/**
+ * struct cyclecounter - hardware abstraction for a free running counter
+ * Provides completely state-free accessors to the underlying hardware.
+ * Depending on which hardware it reads, the cycle counter may wrap
+ * around quickly. Locking rules (if necessary) have to be defined
+ * by the implementor and user of specific instances of this API.
+ *
+ * @read: returns the current cycle value
+ * @mask: bitmask for two's complement
+ * subtraction of non 64 bit counters,
+ * see CLOCKSOURCE_MASK() helper macro
+ * @mult: cycle to nanosecond multiplier
+ * @shift: cycle to nanosecond divisor (power of two)
+ */
+struct cyclecounter {
+ cycle_t (*read)(const struct cyclecounter *cc);
+ cycle_t mask;
+ u32 mult;
+ u32 shift;
+};
+
+/**
+ * struct timecounter - layer above a %struct cyclecounter which counts nanoseconds
+ * Contains the state needed by timecounter_read() to detect
+ * cycle counter wrap around. Initialize with
+ * timecounter_init(). Also used to convert cycle counts into the
+ * corresponding nanosecond counts with timecounter_cyc2time(). Users
+ * of this code are responsible for initializing the underlying
+ * cycle counter hardware, locking issues and reading the time
+ * more often than the cycle counter wraps around. The nanosecond
+ * counter will only wrap around after ~585 years.
+ *
+ * @cc: the cycle counter used by this instance
+ * @cycle_last: most recent cycle counter value seen by
+ * timecounter_read()
+ * @nsec: continuously increasing count
+ */
+struct timecounter {
+ const struct cyclecounter *cc;
+ cycle_t cycle_last;
+ u64 nsec;
+};
+
+/**
+ * cyclecounter_cyc2ns - converts cycle counter cycles to nanoseconds
+ * @tc: Pointer to cycle counter.
+ * @cycles: Cycles
+ *
+ * XXX - This could use some mult_lxl_ll() asm optimization. Same code
+ * as in cyc2ns, but with unsigned result.
+ */
+static inline u64 cyclecounter_cyc2ns(const struct cyclecounter *cc,
+ cycle_t cycles)
+{
+ u64 ret = (u64)cycles;
+ ret = (ret * cc->mult) >> cc->shift;
+ return ret;
+}
+
+/**
+ * timecounter_init - initialize a time counter
+ * @tc: Pointer to time counter which is to be initialized/reset
+ * @cc: A cycle counter, ready to be used.
+ * @start_tstamp: Arbitrary initial time stamp.
+ *
+ * After this call the current cycle register (roughly) corresponds to
+ * the initial time stamp. Every call to timecounter_read() increments
+ * the time stamp counter by the number of elapsed nanoseconds.
+ */
+extern void timecounter_init(struct timecounter *tc,
+ const struct cyclecounter *cc,
+ u64 start_tstamp);
+
+/**
+ * timecounter_read - return nanoseconds elapsed since timecounter_init()
+ * plus the initial time stamp
+ * @tc: Pointer to time counter.
+ *
+ * In other words, keeps track of time since the same epoch as
+ * the function which generated the initial time stamp.
+ */
+extern u64 timecounter_read(struct timecounter *tc);
+
+/**
+ * timecounter_cyc2time - convert a cycle counter to same
+ * time base as values returned by
+ * timecounter_read()
+ * @tc: Pointer to time counter.
+ * @cycle: a value returned by tc->cc->read()
+ *
+ * Cycle counts that are converted correctly as long as they
+ * fall into the interval [-1/2 max cycle count, +1/2 max cycle count],
+ * with "max cycle count" == cs->mask+1.
+ *
+ * This allows conversion of cycle counter values which were generated
+ * in the past.
+ */
+extern u64 timecounter_cyc2time(struct timecounter *tc,
+ cycle_t cycle_tstamp);
/**
* struct clocksource - hardware abstraction for a free running counter
* Provides mostly state-free accessors to the underlying hardware.
+ * This is the structure used for system time.
*
* @name: ptr to clocksource name
* @list: list head for registration
* 400-499: Perfect
* The ideal clocksource. A must-use where
* available.
- * @read: returns a cycle value
+ * @read: returns a cycle value, passes clocksource as argument
+ * @enable: optional function to enable the clocksource
+ * @disable: optional function to disable the clocksource
* @mask: bitmask for two's complement
* subtraction of non 64 bit counters
* @mult: cycle to nanosecond multiplier
* @shift: cycle to nanosecond divisor (power of two)
- * @update_callback: called when safe to alter clocksource values
- * @is_continuous: defines if clocksource is free-running.
- * @cycle_interval: Used internally by timekeeping core, please ignore.
- * @xtime_interval: Used internally by timekeeping core, please ignore.
+ * @max_idle_ns: max idle time permitted by the clocksource (nsecs)
+ * @flags: flags describing special properties
+ * @vread: vsyscall based read
+ * @suspend: suspend function for the clocksource, if necessary
+ * @resume: resume function for the clocksource, if necessary
*/
struct clocksource {
+ /*
+ * First part of structure is read mostly
+ */
char *name;
struct list_head list;
int rating;
- cycle_t (*read)(void);
+ cycle_t (*read)(struct clocksource *cs);
+ int (*enable)(struct clocksource *cs);
+ void (*disable)(struct clocksource *cs);
cycle_t mask;
u32 mult;
u32 shift;
- int (*update_callback)(void);
- int is_continuous;
+ u64 max_idle_ns;
+ unsigned long flags;
+ cycle_t (*vread)(void);
+ void (*suspend)(struct clocksource *cs);
+ void (*resume)(struct clocksource *cs);
+#ifdef CONFIG_IA64
+ void *fsys_mmio; /* used by fsyscall asm code */
+#define CLKSRC_FSYS_MMIO_SET(mmio, addr) ((mmio) = (addr))
+#else
+#define CLKSRC_FSYS_MMIO_SET(mmio, addr) do { } while (0)
+#endif
- /* timekeeping specific data, ignore */
- cycle_t cycle_last, cycle_interval;
- u64 xtime_nsec, xtime_interval;
- s64 error;
+ /*
+ * Second part is written at each timer interrupt
+ * Keep it in a different cache line to dirty no
+ * more than one cache line.
+ */
+ cycle_t cycle_last ____cacheline_aligned_in_smp;
+
+#ifdef CONFIG_CLOCKSOURCE_WATCHDOG
+ /* Watchdog related data, used by the framework */
+ struct list_head wd_list;
+ cycle_t wd_last;
+#endif
};
+/*
+ * Clock source flags bits::
+ */
+#define CLOCK_SOURCE_IS_CONTINUOUS 0x01
+#define CLOCK_SOURCE_MUST_VERIFY 0x02
+
+#define CLOCK_SOURCE_WATCHDOG 0x10
+#define CLOCK_SOURCE_VALID_FOR_HRES 0x20
+#define CLOCK_SOURCE_UNSTABLE 0x40
+
/* simplify initialization of mask field */
-#define CLOCKSOURCE_MASK(bits) (cycle_t)(bits<64 ? ((1ULL<<bits)-1) : -1)
+#define CLOCKSOURCE_MASK(bits) (cycle_t)((bits) < 64 ? ((1ULL<<(bits))-1) : -1)
/**
* clocksource_khz2mult - calculates mult from khz and shift
}
/**
- * clocksource_read: - Access the clocksource's current cycle value
- * @cs: pointer to clocksource being read
- *
- * Uses the clocksource to return the current cycle_t value
- */
-static inline cycle_t clocksource_read(struct clocksource *cs)
-{
- return cs->read();
-}
-
-/**
- * cyc2ns - converts clocksource cycles to nanoseconds
- * @cs: Pointer to clocksource
- * @cycles: Cycles
+ * clocksource_cyc2ns - converts clocksource cycles to nanoseconds
*
- * Uses the clocksource and ntp ajdustment to convert cycle_ts to nanoseconds.
+ * Converts cycles to nanoseconds, using the given mult and shift.
*
* XXX - This could use some mult_lxl_ll() asm optimization
*/
-static inline s64 cyc2ns(struct clocksource *cs, cycle_t cycles)
+static inline s64 clocksource_cyc2ns(cycle_t cycles, u32 mult, u32 shift)
{
- u64 ret = (u64)cycles;
- ret = (ret * cs->mult) >> cs->shift;
- return ret;
+ return ((u64) cycles * mult) >> shift;
}
-/**
- * clocksource_calculate_interval - Calculates a clocksource interval struct
- *
- * @c: Pointer to clocksource.
- * @length_nsec: Desired interval length in nanoseconds.
- *
- * Calculates a fixed cycle/nsec interval for a given clocksource/adjustment
- * pair and interval request.
- *
- * Unless you're the timekeeping code, you should not be using this!
- */
-static inline void clocksource_calculate_interval(struct clocksource *c,
- unsigned long length_nsec)
-{
- u64 tmp;
- /* XXX - All of this could use a whole lot of optimization */
- tmp = length_nsec;
- tmp <<= c->shift;
- tmp += c->mult/2;
- do_div(tmp, c->mult);
+/* used to install a new clocksource */
+extern int clocksource_register(struct clocksource*);
+extern void clocksource_unregister(struct clocksource*);
+extern void clocksource_touch_watchdog(void);
+extern struct clocksource* clocksource_get_next(void);
+extern void clocksource_change_rating(struct clocksource *cs, int rating);
+extern void clocksource_suspend(void);
+extern void clocksource_resume(void);
+extern struct clocksource * __init __weak clocksource_default_clock(void);
+extern void clocksource_mark_unstable(struct clocksource *cs);
+
+extern void
+clocks_calc_mult_shift(u32 *mult, u32 *shift, u32 from, u32 to, u32 minsec);
- c->cycle_interval = (cycle_t)tmp;
- if (c->cycle_interval == 0)
- c->cycle_interval = 1;
+static inline void
+clocksource_calc_mult_shift(struct clocksource *cs, u32 freq, u32 minsec)
+{
+ return clocks_calc_mult_shift(&cs->mult, &cs->shift, freq,
+ NSEC_PER_SEC, minsec);
+}
- c->xtime_interval = (u64)c->cycle_interval * c->mult;
+#ifdef CONFIG_GENERIC_TIME_VSYSCALL
+extern void
+update_vsyscall(struct timespec *ts, struct clocksource *c, u32 mult);
+extern void update_vsyscall_tz(void);
+#else
+static inline void
+update_vsyscall(struct timespec *ts, struct clocksource *c, u32 mult)
+{
}
+static inline void update_vsyscall_tz(void)
+{
+}
+#endif
-/* used to install a new clocksource */
-extern int clocksource_register(struct clocksource*);
-extern struct clocksource* clocksource_get_next(void);
-extern void clocksource_change_rating(struct clocksource *cs, int rating);
+extern void timekeeping_notify(struct clocksource *clock);
#endif /* _LINUX_CLOCKSOURCE_H */