KVM: Increase NR_IOBUS_DEVS limit to 200

[safe/jmp/linux-2.6] / include / linux / ata.h

diff --git a/include/linux/ata.h b/include/linux/ata.h
index 7c5beaf..700c5b9 100644 (file)
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -75,6 +75,7 @@ enum {
        ATA_ID_EIDE_DMA_TIME    = 66,
        ATA_ID_EIDE_PIO         = 67,
        ATA_ID_EIDE_PIO_IORDY   = 68,
+       ATA_ID_ADDITIONAL_SUPP  = 69,
        ATA_ID_QUEUE_DEPTH      = 75,
        ATA_ID_MAJOR_VER        = 80,
        ATA_ID_COMMAND_SET_1    = 82,
@@ -87,6 +88,7 @@ enum {
        ATA_ID_HW_CONFIG        = 93,
        ATA_ID_SPG              = 98,
        ATA_ID_LBA_CAPACITY_2   = 100,
+       ATA_ID_SECTOR_SIZE      = 106,
        ATA_ID_LAST_LUN         = 126,
        ATA_ID_DLF              = 128,
        ATA_ID_CSFO             = 129,
@@ -334,9 +336,12 @@ enum {
        SETFEATURES_SATA_DISABLE = 0x90, /* Disable use of SATA feature */
 
        /* SETFEATURE Sector counts for SATA features */
+       SATA_FPDMA_OFFSET       = 0x01, /* FPDMA non-zero buffer offsets */
        SATA_FPDMA_AA           = 0x02, /* FPDMA Setup FIS Auto-Activate */
        SATA_DIPM               = 0x03, /* Device Initiated Power Management */
+       SATA_FPDMA_IN_ORDER     = 0x04, /* FPDMA in-order data delivery */
        SATA_AN                 = 0x05, /* Asynchronous Notification */
+       SATA_SSP                = 0x06, /* Software Settings Preservation */
 
        /* feature values for SET_MAX */
        ATA_SET_MAX_ADDR        = 0x00,
@@ -635,6 +640,18 @@ static inline int ata_id_flush_ext_enabled(const u16 *id)
        return (id[ATA_ID_CFS_ENABLE_2] & 0x2400) == 0x2400;
 }
 
+static inline int ata_id_has_large_logical_sectors(const u16 *id)
+{
+       if ((id[ATA_ID_SECTOR_SIZE] & 0xc000) != 0x4000)
+               return 0;
+       return id[ATA_ID_SECTOR_SIZE] & (1 << 13);
+}
+
+static inline u16 ata_id_logical_per_physical_sectors(const u16 *id)
+{
+       return 1 << (id[ATA_ID_SECTOR_SIZE] & 0xf);
+}
+
 static inline int ata_id_has_lba48(const u16 *id)
 {
        if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
@@ -800,6 +817,16 @@ static inline int ata_id_has_trim(const u16 *id)
        return 0;
 }
 
+static inline int ata_id_has_zero_after_trim(const u16 *id)
+{
+       /* DSM supported, deterministic read, and read zero after trim set */
+       if (ata_id_has_trim(id) &&
+           (id[ATA_ID_ADDITIONAL_SUPP] & 0x4020) == 0x4020)
+               return 1;
+
+       return 0;
+}
+
 static inline int ata_id_current_chs_valid(const u16 *id)
 {
        /* For ATA-1 devices, if the INITIALIZE DEVICE PARAMETERS command
@@ -814,7 +841,8 @@ static inline int ata_id_current_chs_valid(const u16 *id)
 
 static inline int ata_id_is_cfa(const u16 *id)
 {
-       if (id[ATA_ID_CONFIG] == 0x848A)        /* Traditional CF */
+       if ((id[ATA_ID_CONFIG] == 0x848A) ||    /* Traditional CF */
+           (id[ATA_ID_CONFIG] == 0x844A))      /* Delkin Devices CF */
                return 1;
        /*
         * CF specs don't require specific value in the word 0 anymore and yet
@@ -955,17 +983,17 @@ static inline void ata_id_to_hd_driveid(u16 *id)
 }
 
 /*
- * Write up to 'max' LBA Range Entries to the buffer that will cover the
- * extent from sector to sector + count.  This is used for TRIM and for
- * ADD LBA(S) TO NV CACHE PINNED SET.
+ * Write LBA Range Entries to the buffer that will cover the extent from
+ * sector to sector + count.  This is used for TRIM and for ADD LBA(S)
+ * TO NV CACHE PINNED SET.
  */
-static inline unsigned ata_set_lba_range_entries(void *_buffer, unsigned max,
-                                               u64 sector, unsigned long count)
+static inline unsigned ata_set_lba_range_entries(void *_buffer,
+               unsigned buf_size, u64 sector, unsigned long count)
 {
        __le64 *buffer = _buffer;
-       unsigned i = 0;
+       unsigned i = 0, used_bytes;
 
-       while (i < max) {
+       while (i < buf_size / 8 ) { /* 6-byte LBA + 2-byte range per entry */
                u64 entry = sector |
                        ((u64)(count > 0xffff ? 0xffff : count) << 48);
                buffer[i++] = __cpu_to_le64(entry);
@@ -975,9 +1003,9 @@ static inline unsigned ata_set_lba_range_entries(void *_buffer, unsigned max,
                sector += 0xffff;
        }
 
-       max = ALIGN(i * 8, 512);
-       memset(buffer + i, 0, max - i * 8);
-       return max;
+       used_bytes = ALIGN(i * 8, 512);
+       memset(buffer + i, 0, used_bytes - i * 8);
+       return used_bytes;
 }
 
 static inline int is_multi_taskfile(struct ata_taskfile *tf)
@@ -997,8 +1025,8 @@ static inline int ata_ok(u8 status)
 
 static inline int lba_28_ok(u64 block, u32 n_block)
 {
-       /* check the ending block number */
-       return ((block + n_block) < ((u64)1 << 28)) && (n_block <= 256);
+       /* check the ending block number: must be LESS THAN 0x0fffffff */
+       return ((block + n_block) < ((1 << 28) - 1)) && (n_block <= 256);
 }
 
 static inline int lba_48_ok(u64 block, u32 n_block)