#include <asm/reg_booke.h>
#endif /* CONFIG_BOOKE || CONFIG_40x */
+#ifdef CONFIG_FSL_EMB_PERFMON
+#include <asm/reg_fsl_emb.h>
+#endif
+
#ifdef CONFIG_8xx
#include <asm/reg_8xx.h>
#endif /* CONFIG_8xx */
#define MSR_ISF_LG 61 /* Interrupt 64b mode valid on 630 */
#define MSR_HV_LG 60 /* Hypervisor state */
#define MSR_VEC_LG 25 /* Enable AltiVec */
+#define MSR_VSX_LG 23 /* Enable VSX */
#define MSR_POW_LG 18 /* Enable Power Management */
#define MSR_WE_LG 18 /* Wait State Enable */
#define MSR_TGPR_LG 17 /* TLB Update registers in use */
#endif
#define MSR_VEC __MASK(MSR_VEC_LG) /* Enable AltiVec */
+#define MSR_VSX __MASK(MSR_VSX_LG) /* Enable VSX */
#define MSR_POW __MASK(MSR_POW_LG) /* Enable Power Management */
#define MSR_WE __MASK(MSR_WE_LG) /* Wait State Enable */
#define MSR_TGPR __MASK(MSR_TGPR_LG) /* TLB Update registers in use */
#else /* 32-bit */
/* Default MSR for kernel mode. */
#ifndef MSR_KERNEL /* reg_booke.h also defines this */
-#ifdef CONFIG_APUS_FAST_EXCEPT
-#define MSR_KERNEL (MSR_ME|MSR_IP|MSR_RI|MSR_IR|MSR_DR)
-#else
#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR)
#endif
-#endif
#define MSR_USER (MSR_KERNEL|MSR_PR|MSR_EE)
#endif
#define CTRL_RUNLATCH 0x1
#define SPRN_DABR 0x3F5 /* Data Address Breakpoint Register */
#define DABR_TRANSLATION (1UL << 2)
+#define SPRN_DABR2 0x13D /* e300 */
+#define SPRN_DABRX 0x3F7 /* Data Address Breakpoint Register Extension */
+#define DABRX_USER (1UL << 0)
+#define DABRX_KERNEL (1UL << 1)
#define SPRN_DAR 0x013 /* Data Address Register */
+#define SPRN_DBCR 0x136 /* e300 Data Breakpoint Control Reg */
#define SPRN_DSISR 0x012 /* Data Storage Interrupt Status Register */
#define DSISR_NOHPTE 0x40000000 /* no translation found */
#define DSISR_PROTFAULT 0x08000000 /* protection fault */
#define HID0_DAPUEN (1<<8) /* Debug APU enable */
#define HID0_SGE (1<<7) /* Store Gathering Enable */
#define HID0_SIED (1<<7) /* Serial Instr. Execution [Disable] */
-#define HID0_DFCA (1<<6) /* Data Cache Flush Assist */
+#define HID0_DCFA (1<<6) /* Data Cache Flush Assist */
#define HID0_LRSTK (1<<4) /* Link register stack - 745x */
#define HID0_BTIC (1<<5) /* Branch Target Instr Cache Enable */
#define HID0_ABE (1<<3) /* Address Broadcast Enable */
#define HID1_PS (1<<16) /* 750FX PLL selection */
#define SPRN_HID2 0x3F8 /* Hardware Implementation Register 2 */
#define SPRN_IABR 0x3F2 /* Instruction Address Breakpoint Register */
+#define SPRN_IABR2 0x3FA /* 83xx */
+#define SPRN_IBCR 0x135 /* 83xx Insn Breakpoint Control Reg */
#define SPRN_HID4 0x3F4 /* 970 HID4 */
#define SPRN_HID5 0x3F6 /* 970 HID5 */
#define SPRN_HID6 0x3F9 /* BE HID 6 */
#define PA6T_MMCR1_ES4 0x0000000000ff0000UL
#define PA6T_MMCR1_ES5 0x00000000ff000000UL
-#define SPRN_PA6T_SIAR 780
-#define SPRN_PA6T_UPMC0 771
-#define SPRN_PA6T_UPMC1 772
+#define SPRN_PA6T_UPMC0 771 /* User PerfMon Counter 0 */
+#define SPRN_PA6T_UPMC1 772 /* ... */
#define SPRN_PA6T_UPMC2 773
#define SPRN_PA6T_UPMC3 774
#define SPRN_PA6T_UPMC4 775
#define SPRN_PA6T_UPMC5 776
-#define SPRN_PA6T_UMMCR0 779
-#define SPRN_PA6T_UMMCR1 782
-#define SPRN_PA6T_PMC0 787
-#define SPRN_PA6T_PMC1 788
-#define SPRN_PA6T_PMC2 789
-#define SPRN_PA6T_PMC3 790
-#define SPRN_PA6T_PMC4 791
-#define SPRN_PA6T_PMC5 792
+#define SPRN_PA6T_UMMCR0 779 /* User Monitor Mode Control Register 0 */
+#define SPRN_PA6T_SIAR 780 /* Sampled Instruction Address */
+#define SPRN_PA6T_UMMCR1 782 /* User Monitor Mode Control Register 1 */
+#define SPRN_PA6T_SIER 785 /* Sampled Instruction Event Register */
+#define SPRN_PA6T_PMC0 787
+#define SPRN_PA6T_PMC1 788
+#define SPRN_PA6T_PMC2 789
+#define SPRN_PA6T_PMC3 790
+#define SPRN_PA6T_PMC4 791
+#define SPRN_PA6T_PMC5 792
+#define SPRN_PA6T_TSR0 793 /* Timestamp Register 0 */
+#define SPRN_PA6T_TSR1 794 /* Timestamp Register 1 */
+#define SPRN_PA6T_TSR2 799 /* Timestamp Register 2 */
+#define SPRN_PA6T_TSR3 784 /* Timestamp Register 3 */
+
+#define SPRN_PA6T_IER 981 /* Icache Error Register */
+#define SPRN_PA6T_DER 982 /* Dcache Error Register */
+#define SPRN_PA6T_BER 862 /* BIU Error Address Register */
+#define SPRN_PA6T_MER 849 /* MMU Error Register */
+
+#define SPRN_PA6T_IMA0 880 /* Instruction Match Array 0 */
+#define SPRN_PA6T_IMA1 881 /* ... */
+#define SPRN_PA6T_IMA2 882
+#define SPRN_PA6T_IMA3 883
+#define SPRN_PA6T_IMA4 884
+#define SPRN_PA6T_IMA5 885
+#define SPRN_PA6T_IMA6 886
+#define SPRN_PA6T_IMA7 887
+#define SPRN_PA6T_IMA8 888
+#define SPRN_PA6T_IMA9 889
+#define SPRN_PA6T_BTCR 978 /* Breakpoint and Tagging Control Register */
+#define SPRN_PA6T_IMAAT 979 /* Instruction Match Array Action Table */
+#define SPRN_PA6T_PCCR 1019 /* Power Counter Control Register */
+#define SPRN_BKMK 1020 /* Cell Bookmark Register */
+#define SPRN_PA6T_RPCCR 1021 /* Retire PC Trace Control Register */
+
#else /* 32-bit */
#define SPRN_MMCR0 952 /* Monitor Mode Control Register 0 */
#define PV_BE 0x0070
#define PV_PA6T 0x0090
-/*
- * Number of entries in the SLB. If this ever changes we should handle
- * it with a use a cpu feature fixup.
- */
-#define SLB_NUM_ENTRIES 64
-
/* Macros for setting and retrieving special purpose registers */
#ifndef __ASSEMBLY__
#define mfmsr() ({unsigned long rval; \
" .llong %1\n" \
" .llong 97b-98b\n" \
" .llong 99b-98b\n" \
+ " .llong 0\n" \
+ " .llong 0\n" \
".previous" \
: "=r" (rval) : "i" (CPU_FTR_CELL_TB_BUG)); rval;})
#else
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff